Need help with filling circle with circular fill animation

Hello, I'm creating an old fashioned movie countdown
animation but I'm not sure how to approach filling a circle with a
radar-like sweep.
If anyone has any sort of clue how to do this I would
appreciate your help. It can be a timeline based animation or an
ActionScript based animation. Either way is fine with me.
I looked on the internet for tutorials but couldn't find
anything.
Brenda

for some interesting patterns make the lineStyle color and
beginFill color different:

Similar Messages

I have misplaced my iPod Touch 4th Generation. According to Find my iPhone, it should show up in offline mode. I need help on locating it with a software or some other way. Help?

I have misplaced my iPod Touch 4th Generation. According to Find my iPhone, it should show up in offline mode. I need help on locating it with a software or some other way. Help?

There is no other way.
Sorry

Need help on struts configuration with ColdFusion 10 using IIS

We need help on struts configuration with ColdFusion 10 using IIS.
Earlier we were using ColdFusion 8 with IIS 6 for one of our application. This application internally calls struts. After upgrading to ColdFusion 10 struts calls are not loading. We get 404 error.
In ColdFusion 8 struts were configured using actions extension .do in IIS from this file-
C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll.
But in ColdFusion 10 this file is not present as ColdFusion 10 uses Tomcat in place of Jrun.
Also there is no information in ColdFusion log file.

Duane wrote:
doctormirabilis, Welcome to the discussion area!
1) how can i configure the time capsule in order to operate as a remote base station synchronizing with the relay using the ethernet port?
Configure the Time Capsule to act as a bridge (not distributing IP addresses). Also configure the Time Capsule to create an 802.11n wireless network with a unique network name (SSID). That's it.
2) how can i avoid that my powerbook while accessing my wireless network does connect through the relay station instead of using the time capsule?
Configure the Time Capsule to use a different network name than the WDS link between the 2 AirPort Express (AX). Configure the PowerBook to use the Time Capsule network.
There are 2 pieces of information that you should be aware of...
(1) None of the PowerBooks are capable of 802.11n.
(2) The WDS link cuts your available bandwidth in half. So the wireless link to your neighbor's has a maximum potential of 27 Mbps.
Let's for a minute assume that you have a Mac compatible with 802.11n. In your configuration the time you could take advantage of the 802.11n speed is when the Mac is sending/recieving data directly from/to the Time Capsule.
There would be NO speed increase in Internet access. The speed of Internet access is going to be controlled by the slowest link in the path to the Internet. That is probably the connection to the ISP. The next slowest path is the WDS link to your neighbor's.
Duane,
I am in a similar situation, sharing internet with my neighbor. Do you think it would be plausible to hook up a vonage phone adapter to time capsule's ethernet port if time capsule is bridging from my neighbor's router in the configuration you have described? A check of my upload speed shows 1.67Mbps (powerbookG4 w/ airport extreme). Vonage reccommends 90kbps minimum upload speed. Am I going to lose some speed putting the Vonag adapter behind time capsule?
Thank you

Need help re-synching iPods with new computer and getting iTunes to...

Need help re-synching iPods with new computer and getting iTunes to recognize our iPods (it doesn't even recognize them when they're plugged in).
Hubby wiped my harddrive for me, so now I need to get everything back in proper places. I'm using windows XP and installed iTunes once again (I believe it's version 8). I also installed all of my iTunes songs. Now I need to know where to go from here. We have 3 iPods and I need to get them all synched once again. I know how to create different libraries for each of us, but I can't figure out how to get our songs back into our iTunes libraries. When I open iTunes and plug in an iPod, iTunes doesn't even show that an iPod is plugged in.
What do I do now to get each of our iPods synched with our own libraries?
TIA
Brandy

Thanks Zevoneer. The "Restart ipod service" worked and itunes is now recognizing my ipod! Hooray!
Okay, now how do I synch all of our ipods with our individual libraries (I don't want all of my kids' songs and vice versa)? We each have hundreds of songs on our ipods that we don't want to lose.
Thanks again!

When i turn my macbook pro , on it comes up with a circle with a line through it

i tried to wipe my computer to sell it , and after i followed the steps online it restarted and it came up with a grey screen with a circle with a line through it , it seems i have completely wiped the software off my computer as well .... HELP ME PLEASE URGENTLY

Follow the steps here Mac OS X: Gray screen appears during startup - Apple Support

Why won't my quick Silver power mac boot up? Has a gray screen with white circle with slash thru it in the middle of screen!

Gray Screen with white circle with slash thru? Will not boot up! What can I do?
Please help!
Noel

The circle with slash means it cannot boot from the drive it thinks it's supposed to boot from.
Hold the Option/alt key at bootup, what shows as boot choices?
Will it boot from your OSX Install Disc?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

My iphone 4 photo auto rotation was not functioning, might be accidentally locked as I can see a locked symbol with a circle with an arroe surrounding it at the top right angle , next to the power % indicator. Please advise how to unlock it.

My iphone 4 photo/message auto rotation was not functioning, might be accidentally locked as I can see a locked symbol with a circle with an arroe surrounding it at the top right angle , next to the power % indicator. This function was working perfectly since day 1.
Please advise how to unlock it.

Swipe upwards from the bottom of the screen to open Control Center. You will then find the orientation lock in the top row, last icon on the right. White is on, black is off. Tap and turn it off. If you see the lock symbol, then orientation lock is on, and that is what is keeping it in the portrait mode.

Help! blue circle with itunes logo and picture of plug??? what is that? won't start

just intstalled new update 8.1.3 system shut down and now will not restart. Only give image of blue circle with music note and iTunes logo underneath with a plug leading to it? what does that mean?

It means something didn't go right during the update and your iPad is in Recovery mode. The same thing happened to me during the IOS 8.1 update. You need to connect it to iTunes on your computer, update it, and restore it from your iTunes or iCloud backup. If like me you don't have a computer take your iPad to the Apple Store and they will help you with the Restore process.

Need help to create report with jpeg/gif image

Hello,
I need help with creating a form with a special jpeg/gif seal. I never done this Java. Until now, I created all forms with ansi C++ with HP escape characters to draw lines, boxs, and text. This form will contain boxes which is populated with database information read from a text file.
Since this form contains a special seal on the upper right, I don't think it can be done with old fashion ansi C++. How can I create a form with Java and create it as a simple exe to just print the form to a specified printer.
Thanks,
John

Hi,
I am creating a form with boxes (lines and text). What is special about this form is that it has an image jpeg or gif at the top right corner. Is is a state department seal. Up to this form, I had used ansi C++ and print out escape HP character to print out the lines, boxes, and text. I have no idea how to print out the image. I am new to JAVA and only 1 class in it. Is there sample code out there to create this type of form with the image? I need a starting point.
Thanks,
John

NEED HELP!!! with my Micro Photo

i need help i was having problems with my computer recognizing my Micro Photo so i was in to recovery menu so then i accidentally hit the reload firmware option and now i cant get it to work it only goes onto the Recovery Menu and i cant get the firmware updater to work and i cnat find no files of the firmware itself...but the weird thing is i can access the Micro Photo itself through my computer and browse it but idk wat to do some plzzz help me

themagooshow,
You don't need USB2.0 but you will need to have at least Service Pack for your Windows XP and Windows Media Player 0 installed.
Jason

Need help - I2C write/read with TAOS TCS3414 light sensor using USB-8451

Hello, I'm new to labview and need help setting up a vi that will allow me to communicate with a digital light sensor (TAOS TCS3414) using a USB-8451. I need to use the sensor to measure light from a light source that I designed and built as part of a project im working on. I've tried looking at several labview I2C exampled but find them to be very confusing. I've used an arduino to interface with the sensor successfully but need to use labview and dont understand how to write the program. The actions are simple; I need initialize the sensor with a simple command and then request data from 8 data registers and then read that data. The data will then be used in further calculations. The portion i need help with is writing and reading from the sensor. I've attached the datasheet for the sensor as a guide. I can also provide the arduino code that i use to read data from the sensor if that would help.
Pleae keep in mind that i am completely new to labVIEW. I really do want to learn from this but need quick results so the more help the better. It would greately appreciate any help or explaination.
Attachments:
TCS3414_Datasheet_EN_v1.pdf ‏1806 KB

Hi Aaron,
Here you go, this is made with a USB-8452.
When you run the code tick the power en dac enable box on.
Maybe you can help me with my problem, I want to use a fiber to sense light from a led.
Do you use any fiber hardware with the TCS3414?
gr,
Attachments:
TCS3414.vi ‏63 KB

Need help in text field with 2D array

text field with 2D array
Hi
I need help to represent (i) in from field and (j) in to field
I and j are 2D an array indices.
This code are not complated
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
//declaring class
public class test3 extends Applet implements ActionListener
{ //declaring the TextField
private TextField fromField ,toField;
//declaring an array
int weight[][];
int m = 99; // m is infinity
int N; // Set of Nodes
int d; // distance
int i; // source Node
int j; // destition Node
//declaring values of text field
private int from = i; // start Node
private int to = j; // end node
public void init()
setBackground(Color.white);
setForeground(Color.red);
//giving labels
Label TITLE2,TITLE1;
TITLE1 = new Label("from:");
add(TITLE1);
fromField = new TextField(5);
add(fromField);
// register listener using void add actionListener
fromField.addActionListener(this);
TITLE2 = new Label("to");
add(TITLE2);
toField = new TextField(5);
add(toField);
// register listener using void add actionListener
toField.addActionListener(this);
// event handler methods
public void actionPerformed(ActionEvent event) {
//declaring textfield
from=Integer.parseInt(fromField.getText());
to=Integer.parseInt(toField.getText());
weight =new int[7][7];
weight[1][1] = 0; weight[2][1]= 2;
weight[1][2]= 2; weight[2][2]= 0;
weight[1][3]= 5; weight[2][3]= 3;
weight[1][4]= 1; weight[2][4]= 2;
weight[1][5]= 99; weight[2][5]= 99;
weight[1][6]= 99; weight[2][6]= 99;
weight[3][1]= 5;
weight[3][2]= 3;
weight[3][3]= 0;
weight[3][4]= 3;
weight[3][5]= 1;
weight[3][6]= 5;
for (int i=1; i<7; ++i) {
for (int j=1; j<7; ++j)

all your base are belong to us

Please.. need help!! Problem with playing sounds

Hello, any help at all greatly appreciated.
I need a dead-certain way of playing sounds with my java application.
Java media player doesn't seem to be working with sound files with a duration of longer than 30 seconds.
I need a way of accessing the windows sound API from inside my java app.
Anyone have any ideas??????

Hello, any help at all greatly appreciated.
I need a dead-certain way of playing sounds with my java application.
Java media player doesn't seem to be working with sound files with a duration of longer than 30 seconds.
I need a way of accessing the windows sound API from inside my java app.
Anyone have any ideas??????

New and need help - drag and drop with dynamic text

So I'm doing this project and as an animator I'm not familiar with the whole action script side of flash
Okay so far I've managed to create the whole Drag and Drop feature and it works well, the thing is I want to make it so when you drag in object in the correct spot and new text appears, and I need like six different object with the dynamic text. but I have no idea how to integrated it in my code or where I should start!
So i based myself on some tutorial so theres some code in there that had dynamic text, but not exactly what i wanted
Your help would be much appreciated!
This is my code:
var counter:Number = 0;
var startX:Number;
var startY:Number;
six_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
six_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
five_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
five_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
four_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
four_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
three_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
three_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
two_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
two_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
one_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
one_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
function pickUp(event:MouseEvent):void {
    event.target.startDrag(true);
reply_txt.text = "";
event.target.parent.addChild(event.target);
startX = event.target.x;
startY = event.target.y;
function dropIt(event:MouseEvent):void {
    event.target.stopDrag();
var myTargetName:String = "target" + event.target.name;
var myTarget:DisplayObject = getChildByName(myTargetName);
if (event.target.dropTarget != null && event.target.dropTarget.parent == myTarget){
    reply_txt.text = "Good Job!";
event.target.removeEventListener(MouseEvent.MOUSE_DOWN, pickUp);
event.target.removeEventListener(MouseEvent.MOUSE_UP, dropIt);
event.target.buttonMode = false;
event.target.x = myTarget.x;
event.target.y = myTarget.y;
} else {
reply_txt.text = "Try Again!";
event.target.x = startX;
event.target.y = startY;
    if(counter == 6){
        reply_txt.text = "Congrats, you're finished!";
six_mc.buttonMode = true;
five_mc.buttonMode = true;
four_mc.buttonMode = true;
three_mc.buttonMode = true;
two_mc.buttonMode = true;
one_mc.buttonMode = true;

where you have
xxx.text = ....
is where you're assigning text.

Need Help some WPA2 problems with only certain Macs

I've done some searching on the various forums here but can't quite find something that fits the issues I'm having.
We've got 4 Macs on a home wireless network. The specific models are:
iMac 20" Core2Duo
12" PB 1.33Ghz
12" iBook 1.2Ghz
Mac Mini G4 1.42 Ghz
We use to run WPA on a D-Link router (DI-624) and everyone could connect just fine. Then with 10.4.8 all of the sudden my iMac started to have major issues connecting to the wireless network. I did a bunch of reading and found most people saying it was related to using WPA instead of WPA2.
So I went ahead and updated my firmware on the router (it now handles WPA2) and am in the process of getting all the computer back online. I've changed both the network name and the passphrase (and am using WPA2 Personal with AES) and have then set up the new network name along with WPA2 Personal and the correct passhphrase as a Preferred Network on all the machines.
However...
Only the iMac connects to the new WPA2 network.
Both laptops and the Mini have an AirPort Extreme card with firmware version 405.1 (3.90.34.0.p18).
What gives? From what I've read these airport extreme cards should be able to work with WPA2. Oh and all the machines are running 10.4.9.

No help, but i agree with skullcracker!!! Return it ASAP!! You will thank us for this vital information!!!Message Edited by HaZe303 on 05-4-2006 06:29 AM

Need help with filling circle with circular fill animation

Similar Messages

Maybe you are looking for