Need Help With find and Replace

I am a little green to this all. I am trying to find and
replace a word inside the edit region and Dreamweaver will not
change it, because it says its inside a locked region, but its a
editable region?
I have about 900 pages I need to make this change on and was
relying on the find and replace tool to do that. I tried differn't
advanced options, nothing seams to change it. I am using cs3.
Thanks for any help

Using Templates with a 900 page site is a crime against
humanity. You reach
the optimal size for Templates between about 50 and 100.
The error you are getting suggests that there are coding
errors on the page
(perhaps even unrelated to ANY DW Template markup). We'd need
to see the
page to make progress with what that might be, as Alan says.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"RyanWaters" <[email protected]> wrote in
message
news:ggs7fq$gnq$[email protected]..
>I am a little green to this all. I am trying to find and
replace a word
>inside
> the edit region and Dreamweaver will not change it,
because it says its
> inside
> a locked region, but its a editable region?
> I have about 900 pages I need to make this change on and
was relying on
> the
> find and replace tool to do that. I tried differn't
advanced options,
> nothing
> seams to change it. I am using cs3. Thanks for any help
>

Similar Messages

Help with find and replace regex

Hello.
I have a page listing about 50 services that have named
anchors to a
glossary page. Something like this:
<a href="/glossary.html#Blogging">Blogging</a>
And what I need is to have the glossary open in a new window.
So how
do I write a regex that will give me:
<a href="/glossary.html#Blogging"
taget="blank">Blogging</a>
Thanks for any help
Lance

Thanks Brendon.
It's Regular Expression; an optioin in the find and replace
dialog.
I've got to replace 50 of these anchors, each different.
<a href="/glossary.html#Blogging">Blogging</a>
<a href="/glossary.html#yadayada">yadayada</a>
etc.
to make them each open in a new window.
<a href="/glossary.html#Blogging"
taget="blank">Blogging</a>
L.
On Thu, 18 Oct 2007 14:40:46 +1300, "Brendon"
<[email protected]>
wrote:
>Whats a regex?
>Why not just do a Find and Replace? Specify the current
local site, and
>voila. Make sure you spell target correctly though ;-)
>
>
><@networkologist@@gmail.com> wrote in message
>news:[email protected]..
>> Hello.
>>
>> I have a page listing about 50 services that have
named anchors to a
>> glossary page. Something like this:
>>
>> <a
href="/glossary.html#Blogging">Blogging</a>
>>
>> And what I need is to have the glossary open in a
new window. So how
>> do I write a regex that will give me:
>>
>> <a href="/glossary.html#Blogging"
taget="blank">Blogging</a>
>>
>> Thanks for any help
>>
>>
>>
>> Lance
>

Need Help in Find and Replace

Sorry Gurus..
Made a mistake in my post and i removed that
Edited by: MuraliDharan V on May 27, 2009 1:37 AM

Something like this:
with my_tab as (select '|1.23|1.56|1.4|' col1 from dual union all
                select '1.56|1.4' col1 from dual union all
                select '1.2' col1 from dual)
-- end of mimicking your data: Use SQL below!
select col1||'='||sum(cast(tx.column_value.extract('//text()') as varchar2(100))) result
from   my_tab,
       table(xmlsequence(xmltype('<x><x>'||replace(rtrim(ltrim(col1, '|'), '|'),'|','</x><x>')||'</x></x>').extract('//x/*'))) tx
group by col1;
RESULT
|1.23|1.56|1.4|=4.19
1.2=1.2
1.56|1.4=2.96 This uses XML functions to split the string onto different rows, and then sums the result up.
Edited by: Boneist on 27-May-2009 09:42
Gah! Oh well, was an interesting little side diversion...

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

What file format did you export it to?

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Need Help With Find/Replace In DW8

I need to know how to Find/Replace for more than one tag at a
time (I.E--Search for <table>, <tr>, and <td> or
<b> and </b> and remove the code) As it is right now,
it will only search for one tag at a time but I would assume DW can
handle this kind of thing.
Also, I've noticed that since my table tags each have
different attributes in each one, searching for <table> will
not get rid of those table tags...it doesn't even recognize that
they're there. How do I find and replace all table tags even though
each one has different attributes?
Thanks in advance.

Use Regular Expressions
"Big_Slick" <[email protected]> wrote in
message
news:f0ip6t$ee8$[email protected]..
>I need to know how to Find/Replace for more than one tag
at a time
>(I.E--Search
> for <table>, <tr>, and <td> or
and and remove the code) As it is
> right
> now, it will only search for one tag at a time but I
would assume DW can
> handle
> this kind of thing.
>
> Thanks in advance.
>

I need help with finding right stylus pen for lenovo yoga 2 pro!

I did read other person's post, but I did not find my answer. I am currently using my fingers to write my notes and it drives me nuts! I do have a stylus pen that have huge round fabric tip. It does not write well. I want a stylus pen with pointy end so I can acturally take my notes on OneNote. I writes equations down so it is very hard to write small and neat with my hand. I do know that my laptop is touch sensitive so it only works with rubber or fabric tips! I could not find any stylus pen with those tip that are pointy.... I need help on finding pointy tipped stylus pen that will let me write well. I am ordering ati-glare screen protector because I can see myself on the screen like a mirror... lol Hopefully this will not keep me from finding a pen that works well! Please give me link to the pen, if you can! Thank you for reading!

ColonelONeill is correct.
The Yoga 2 Pro does not have a digitizer, so a capacitative stylus, which mimics a fingertip, is what you'd need.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Dumb Q: problem with Find And Replace window in Flash 8

Dear Flash Group,
apologies if this is trivial, it's my first day using Flash.
I downloaded a Flash project from
http://www.flashorb.com/articles/benchmark_files/flash-benchmark.zip.
This
flash calls into a web service at localhost:8080. I used the
'Find and
Replace' window within Flash Professional 8 to locate the
string
'localhost:8080' and replaced it with plain 'localhost'.
However, when I 'Debug the Movie' (Ctrl-Shift-Enter), it
still tries to
access port 8080! Obsiously, my replace command did not do
what I thought it
would do. I opened the FLA file in a binary editor, and saw 4
more
references to 8080, One if them in 'Properties' of a
WebServicesConnector,
but I cannot figure out how to find the other occurences.
Checking on google, I see lots of people having similar
problems, but no
solutions
Any ideas?
Regards, /george
PS. What do you guys do for code completion - is there a tool
that would
bring Flash on par with an professional IDE?

george,
> when I 'Debug the Movie' (Ctrl-Shift-Enter), it still
> tries to access port 8080! Obsiously, my replace
> command did not do what I thought it would do.
Agreed.
> I opened the FLA file in a binary editor, and saw 4
> more references to 8080, One if them in 'Properties'
> of a WebServicesConnector, but I cannot figure out
> how to find the other occurences.
Might they be the result of that WebServicesConnector
reference?
> Checking on google, I see lots of people having
> similar problems, but no solutions
That's really odd, actually. I'm on these boards every day,
and I've
never heard of this issue. I don't *think* the Find/Replace
dialog visits
panel contents, such as the Component Inspector panel, but I
wouldn't swear
to that.
> What do you guys do for code completion - is there
> a tool that would bring Flash on par with an
professional IDE?
Well, Flash is a professional IDE, of course. By definition,
if you pay
for something, you have acquired a professional product or
service. I know
what you mean, though. Flash itself rocks, but the Actions
panel can be
glaringly weak. Personally, I use SE|PY to edit ActionScript.
http://www.sephiroth.it/python/sepy.php
Sorry I can't speak to your other issue. :-/
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

Need help with trim and null function

Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
Thanks

Hi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
,       NVL ( AL1.user_data_text, 'XX' )
FROM    Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
            , 'XX'
FROM    Table

Need Help with Sony Hybrid replacement tips

Hey all,
First post here, so please excuse me if I've posted in the wrong section. Earlier this month I ordered myself the Sony Hybrid EPEX10A/BLK Replacement Earbuds from Amazon.com. While attempting to get a large tip on my Sennheiser CX500s, the colored part broke. I now only have one large tip, which is currently fitting the CX500 just fine. I really need another large tip, and I don't know what to do. I thought the best option would be to contact Sony Support and ask for a replacement (I'm assuming my warranty is still in effect, don't know anything), but I don't know how. I went to this (http://esupport.sony.com/US/perl/contact-land.pl) website and selected technical support, and since I couldn't find my product in the list, I typed in what I thought was the model number, and it came up with no results. I have no idea where the model number is on the packaging (which I still have).
Can somebody please help me get a replacement? Other than the broken tip, these are the best tips I have had , and I would really like to continue using them.
Thanks for the help!
Solved!
Go to Solution.

Contact the Sony Parts and Accessories team - they have a different number to Sony Technical Support and should be able to locate the correct part for you - details on the following link:
https://servicesales.sel.sony.com/ecom/ ... /index.jsp

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

Need help with finding a workaround: the shotcut ctrl+click opens 2 tabs in my case

Hello!
I have several links with an onclick event, which contains some javascript handling and window.open() after it, and they have attribute href="javascript:void(0);" as well.
When user try Ctrl+click Firefox opens him 2 tabs: the first one with "right" content and the second with javascript:void(0).
I've tried to set href="#" and in this case Ctrl+click works as I want, but on the original tab the user is redirected by the browser to the top of the page. The empty attribute (href="") also results 2 tabs. Maybe there is some value of the href attribute with which everything will work as I want? I've fed up with this and will be appreciated a lot if you help. Thanks.
== This happened ==
Every time Firefox opened
== User use Ctrl+click

I won't be searching thru all that code to try to find something relevant to your post, but if you are using a Loader to load the images, you can get the width and height as soon as the loading is complete using the loader object (loader.width, loader.height). You just need to wait until loading is complete, so you'll need a listener for that if you don't have one already.

Need Help with finding Mean across rows

Hi all,
I have a requirement of finding mean of several columns across a row. The tricky part is there might or might not be a value in each of the rows & the average must be calculated for the ones which has a value. Let me give you an example:
col1 col2 col2 col4
1 NULL 3 5 --> Mean will be (1+3+5)/3 = 3
NULL NULL 2 4 --> Mean will be (2+4)/2 = 3.
One option (dump acc to me) is to get the whole record into a %ROWTYPE variable, parse through each of the columns, see if the value is not null & greater than 0, increment the counter (i) & calculate the sum. Finally do a sum/i. One mean has 215 columns that needs to be averaged and having a separate if-end if seems illogical. there must be a smart solution to find this kind of average. Please help.
Thanks,
Sirisha

Hi, Sirisha,
siri_me wrote:
Hi all,
I have a requirement of finding mean of several columns across a row. The tricky part is there might or might not be a value in each of the rows & the average must be calculated for the ones which has a value. Let me give you an example:
col1 col2 col2 col4
1 NULL 3 5 --> Mean will be (1+3+5)/3 = 3
NULL NULL 2 4 --> Mean will be (2+4)/2 = 3.If you only have a few columns, you can do something like this:
SELECT          (NVL (col1, 0)     + NVL (col2, 0)     + NVL (col3, 0)     + NVL (col4, 0)
      / NULLIF ( NVL2 (col1, 1, 0) + NVL2 (col2, 1, 0) + NVL2 (col3, 1, 0) + NVL2 (col4, 1, 0)
                  , 0
FROM     table_x
One option (dump acc to me) What does "dump acc to me" mean?
is to get the whole record into a %ROWTYPE variable, parse through each of the columns, see if the value is not null & greater than 0, increment the counter (i) & calculate the sum. Finally do a sum/i. One mean has 215 columns that needs to be averaged and having a separate if-end if seems illogical. there must be a smart solution to find this kind of average. Please help.The smart way is to store the numbers in one column to begin with. The fact that it makes sense to take an average of them indicates that they are the same entity, so rather than a table like this:
id     col1     col2     col3     col4
10     1          3     5
11               2     4it would make more sense to have a table like this:
id     val     attr
10     1     1
10     3     3
10     5     4
11     2     3
11     4     4If you are stuck with a design like the former, with col1, col2, col3 and col4 (or ... col215) then you can Unpoivot the data into a form like the latter, with only 3 columns. Then you can use the AVG function.

Need help with Excel and ActiveX

I am new with working with ActiveX, so I need some help regarding writing to a spreadsheet. Here is what I need to do:
1.The user weighs a product on a scale.
2.The user presses the weight button control in labview to retrieve the weight via serial port.
3.The value gets written into a spreadsheet, starting at D2.
4. User weighs the same product after use to get a new weight.
5. labview goes through the same process, but this time it gets written to E2.
6. Differential is calculated (still debating on having the user do this in Excel instead of Labview, since they have to set up a spreadsheet outside of labview for other info not related
to weight).
7. User close labview when finished.
The serial comm and all is fine, but the problem I am having is trying to get a specific cell value written in D2 and then getting another value to be written in E2. For example, initial weight would be D2 and post weight would be E2, and then differential would be F2. For the next product, it would be D3, E3, F3, and so on. What would be the best way to implement this? It looked as if ActiveX would be the only real way to tell Excel where to put the data, but there is still alot I have to learn in where to find and use the proper nodes to complete the process.
Thanks,
Jody M.
The Procter and Gamble Co.
Certified Labview Developer
Currently using LV2012.

Hi z2830than,
see the attached example. It make following things: open Excel, create new Workbook, ..., write Data to D2, save Workbook and close Excel.
Hope it helps.
Mike
Attachments:
Excel_open_write_close_Example_LV71.llb ‏234 KB

Need Help With find and Replace

Similar Messages

Maybe you are looking for