Need help with Flex Modules

Hello..I am very new to flex. I have recently studied little
bit about modular pgming in flex..I am doing a simple project as
explained below..but for some reason I am not able to make it to
work..I am gettig below error..I really apreciate some help on
this.
ReferenceError: Error #1069: Property subViewStack not found
on IntranetHome and there is no default value.
I have a 'IntranetHome' which has code similar to below:
<mx:Application>
<mx:ViewStack id="superViewStack" borderStyle="solid"
width="100%" height="100%" >
<mx:ModuleLoader url="Module1" width="100%" height="100%"
/>
<mx:ModuleLoader url="Module2" width="100%" height="100%"
/>
</mx:ViewStack>
</mx:Application>
In Module1..I have code similar to below:
<mx:Module>
<mx:ViewStack id="subViewStack" borderStyle="solid"
width="100%" height="100%" >
<mx:ModuleLoader url="SubModule1.swf" id="sm"
width="100%" height="100%" />
<mx:ModuleLoader url="SubModule2.swf" id="sm1"
width="100%" height="100%" />
</mx:ViewStack>
</mx:Module>
In SubModule1 there are couple of buttons..when I click on
these buttons..I would like to load SubModule2.swf which is under
subViewStack of Module1.. I am getting errors when I am trying to
say :
on button
click="Applixation.application.subViewStack.selectedIndex=1"
Am I doing something wrong...Please help me out here..If
there is a better way please let me know. Thanks

"Smart_flex" <[email protected]> wrote in
message
news:g7b8ol$d57$[email protected]..
> Hello..I am very new to flex. I have recently studied
little bit about
> modular
> pgming in flex..I am doing a simple project as explained
below..but for
> some
> reason I am not able to make it to work..I am gettig
below error..I really
> apreciate some help on this.
>
> ReferenceError: Error #1069: Property subViewStack not
found on
> IntranetHome
> and there is no default value.
>
> I have a 'IntranetHome' which has code similar to below:
> <mx:Application>
> <mx:ViewStack id="superViewStack" borderStyle="solid"
width="100%"
> height="100%" >
> <mx:ModuleLoader url="Module1" width="100%"
height="100%" />
> <mx:ModuleLoader url="Module2" width="100%"
height="100%" />
> ...
> </mx:ViewStack>
> </mx:Application>
>
> In Module1..I have code similar to below:
>
> <mx:Module>
> <mx:ViewStack id="subViewStack" borderStyle="solid"
width="100%"
> height="100%" >
> <mx:ModuleLoader url="SubModule1.swf" id="sm"
width="100%"
> height="100%" />
> <mx:ModuleLoader url="SubModule2.swf" id="sm1"
width="100%"
> height="100%" />
> .....
> </mx:ViewStack>
> </mx:Module>
>
> In SubModule1 there are couple of buttons..when I click
on these
> buttons..I
> would like to load SubModule2.swf which is under
subViewStack of
> Module1.. I
> am getting errors when I am trying to say :
>
> on button
click="Applixation.application.subViewStack.selectedIndex=1"
>
> Am I doing something wrong...Please help me out here..If
there is a better
> way
> please let me know. Thanks
http://blogs.adobe.com/aharui/presentations/
Look at the last one

Similar Messages

Newbie needs help with Flex app

Hi there. I am very new to Flex and also fairly new to
programming although I do have a little experience.
I am trying to create an app which stores code snippets or
common text I tend to use every day in my documents and emails.
So basically I need help on a design level. I can refer to
the developer's manual for exact instructions for commands, but I
need to know what to code first.
The app will consist of:
-a tree directory structure where I can create groups.
-There will be a basic text editor where I input all my data,
basic text formatting options (font, bullets etc) would be a bonus.
-A search function
-Finally it will ideally allow multiple client apps write to
a central database file over a network
Can anyone suggest how I should approach such a project?
Or are there any tutorials / source files which demonstrate
each bullet point?
thanks.

Hey jono,
I'm new too. But I think I might know the right components.
If you google any of these + flex 3 you should get some
decent documentation
tree - advanced dataGrid component
basic text editor - rich text editor component
search function - well, you're gonna need to read up on
arrays, and arraycollection. Once you get that stuff working, you
can write up a function to search for a string in an array.
network functionality - HTTPService, you can dump the
datagrid into a database, and have it load the database when you
open up the application.
Give these things a shot, tutorials / sources will come with
the google searches.

Need help with the Modulation Toolkit to configure a QPSK Modulation

Hi! I'm
trying to build a CDMA system with the Modulation Toolkit to use it later with
a PXI-RF Product as a part of my thesis (I don't remember the exact model
number because it's in my university and I'm home right now, sorry). But my problem right now is, I assume, a very simple one.
I'm having
some trouble understanding the MT Modulate PSK.vi and the MT
Demodulate PSK.vi since I have them both connected and the output bit stream is
not the same as the input bit stream. I'm guessing it's a problem with the sync
parameters in the MT Generate Synchronization Parameter.vi because maybe I
don't really understand how the sync bits work. I tried using a simple
sync header but the output bit stream is always shorter than the input and shows
only a little portion of the input bit stream and some of the 1's I used to
create the sync header, and it gets worse when I increase the number of input
bits.
I'm
attaching the simple vi I created to try to understand the mod-demod vi's, so
if someone knows what I'm doing wrong it would be great if you let me know
since I'm stuck in my thesis and understanding this issue will let me continue
with the project.
Thanks a
lot in advance!
Daniel
Attachments:
QPSK Test V-1.0.vi ‏31 KB

Por favor mire en enlace abajo:
Cordiales Saludos
http://forums.ni.com/ni/board/message?board.id=6170&message.id=11549&jump=true
Luciano Borges
National Instruments Brazil
Luciano Borges
R&D Engineer
Pirelli Brazil

Need help with RF Modulation

I have an F Jack (coaxial) jack coming from a wall plate I want the video signal to go to a Sharp DLP projector and the audio to go to an amp connected to 4 speakers. I need to find some way to convert the RF signal from an F-Jack to RCA or S-Video.
I have purchased an RCA CRF940 RF Modulator but I do not seem to be having any signal coming from the Audio-Video Output jacks after connecting the F-Jack connector from the wall plate.
I know the best way to make the conversion is with a simple DVD/VCR combo unit however, I cannot find a unit that has an F-Jack IN/OUT.
If anyone has a suggestion or suggestions I would appreciate it. By-the-way the RCE CRF940 also has S-Video ports as well. I had the same luck with those.
Thanks in Advance

Ok...I'm getting a better picture now.
You've got a reversed idea what that RF modualtor does. It takes an RCA feed and sends to out of the RF...not vice versa.
You will need to modify the in-wall wiring and the wall plate to accommodate RCA connections for this scenario to work.
Disclosure: Former BBY employee.

Need Help with Function Module or BAPI for Stock Requirements & PIRs

Hello,
         I am working on making changes to a Report which should be displaying the PIR (Planned Independant Requirements) Quantities as well as Stock Requirements for SOs & STOs for below Type of Materials for the Given Date.
1. Planning Materials
2. Planned SKUs (that is Materials which do not have a Planning Material attached to them).
        In the Current Logic, we are using an FM REQUIREMENTS_ALLOCATION which fetches the Requirements only for the Planning Materials. It does not work for Planned SKUs.
So, is there any Function Module / BAPI which serves this Purpose for both types of Materisls?
   Also, I've managed to Find out two Function Modules which I thought might be useful but still need confirmation regarding the same.
MD_STOCK_REQUIREMENTS_LIST_API and
BAPI_MATERIAL_MRP_LIST
        Please suggest any other FM if available for this Requirement.
Thanks and Regards,
Venkat Phani Prasad Konduri

Basically, here is what my scenario is. I have two Types of Materials which have a Planning Material attached to it. and the Other Category is that it doesn't have a Planning Material attached to it. So, we call it a Planned SKU. That is a Material planned at the SKU level.
          Now, the Issue is , the Function Module REQUIREMENTS_ALLOCATION doesn't work for the Plannd SKUs but it only works for the Planning Material. Now, based on this Function Module, we are populating the Data for the Planning Materials of Material Type ZPLN. Similarly, is there any we can make this FM work for a Material which is planning at its own Level.
          Please help me in this Regard.
Thanks and Regards,
Venkat Phani Prasad Konduri

Need help with Flex, BlazeDS and Spring

I have a configured Flex-Blaze-Spring application. I can call
a remote method on a Spring bean and pipe its results, (list of
pojos), to a DataGrid and the grid displays the data. The remote
object is defined with a <mx:> tag, defining a handler
function that pipes the result as ArrayCollection to the DataGrid's
data provider. I now want to perform another call to the remote
Spring bean, but this time define the remote object in
ActionScript, and pipe the results to a ArrayCollection variable
that I can then iterator thru and pick off values from attributes
of the objects in the ArrayCollection. I can't set access, my
collection seems to be empty. Here is some code:
public var gameRO:RemoteObject;
public var weeksGameList:ArrayCollection;
public function makePickGrid():void {
pickPanel.removeAllChildren();
var pickGrid:Grid = new Grid();
var gRow:GridRow = new GridRow();
var gItem:GridItem = new GridItem();
var cb:CheckBox;
gameRO = new RemoteObject();
gameRO.destination = "gameService";
gameRO.getWeeksGames.addEventListener( ResultEvent.RESULT,
getWeeksGamesResultHandler );
gameRO.addEventListener( FaultEvent.FAULT, handleFault );
gameRO.getWeeksGames( curWeek.selectedItem );
for each (var game:Object in weeksGameList) {
cb = new CheckBox();
cb.label = game.awayTeam;
gItem.addChild( cb );
gRow.addChild( gItem );
pickGrid.addChild( gRow );
pickPanel.addChild( pickGrid );
public function
getWeeksGamesResultHandler(event:ResultEvent):void {
weeksGameList = event.result as ArrayCollection;
What am I missing here? Thanks for any help!!
mik

Hello
This is a bit of a wild guess, but looking at the code, is it possibly related to the scope of cb?
Why not declare it inside the for loop, rather than outside it?

Need help with flex 3

Hi all,
I'm a newb to Flex 3 and i found it really exciting and helpful.
However i'm facing a problem here. Apparently my Flex doesn't have some of the packages and classes. The two that i have tried and didn't work are: file.filesystem (i try to read/write on file, so i declare "var file:File as ..." and i won't let me do it) and mx:HttpService.
I have no idea how to install those packages and make them work so if anyone can show me the way, i would really really appreciate that.
Thanks a lot and have a great weekend
QP

Update:
I just found out the solution for mx:HttpService:
"The HTTPService needs to be outside of the Canvas and State tags." (http://codingforums.com/showthread.php?p=831082)
Still i haven't figure out the other problem.
Thanks

Need help with SAP SD module

Hi i am new to this forum, i need help with SAP SD module. Can you please provide me pointers or links to get started SAP SD module and start facing the interviews.

Hi Aditya,
For understanding the SD module itself, the link - http://help.sap.com/saphelp_erp2005/helpdata/en/8c/df293581dc1f79e10000009b38f889/frameset.htm is the ultimate one.
Again you can also refer to the mateial "Implementing R/3 S&D BY GLYNN C.WILLIAMS".
For Cracking interview, You can refer to "SAP SD Interview Questions, Answers, and Explanations By: Jim Stewart" which is available in the market.
Regards,
SARTHAK

Need help with interface development

Hi i need help with requirement below with developing interface between or online order system and sap plz lemme know what is bapi i use for creating customer, update and assigining partner id to costumer.
SAP Development
1.     Using standards SAP functional module (with BAPI), create interface that will create/change Ordering party customer in SAP. Following fields are mandatory for customer creation:
     MANDT     Client
     VKORG     Sales organization
     VTWEG     Distribution Channel
     SPART     Division
     KDGRP     Customer Group (= ZORP)
     KUNNR     Customer number
     NAME1     Name 1
     NAME 2     Name 2 (if required)
     SORTL     Search term (short description)
     ZZALTKN     Search term 2 (old customer number)
     LAND1     Country
     ORT01     City
     PSTLZ      Zip Code
     REGIO      Region (state in USA)
     STRAS     Street
     TELF1     Primary telephone number
     TELFX     Primary Fax number
     ZZPRPLANS     Payment Plan
     CCINS     Payment card: Card type
     CCNUM     Payment cards: Card number
     CCDEF     Payment Card: Default Card Indicator
     ZBDGID     Customer Budget ID
     ZHOLD     Budget Hold indicator
     ZZCOSTCENT     Cost Center
2.     Upon successful customer creation system will issues S (success) message that customer has been created.
3.     New ordering party customer created in step ½, will have to be assigned as new partner to its belonging Sold-to/Ship-to customer. Use standard SAP customer functional module in order to perform this partner ID assignment. Partner ID for ordering party should be ZO.
1.7     Enhancement Functionality
Apart from creating a new interface to do the required functionality, the Order Create Interface also has to be changed to accommodate a field to pass the Ordering Party Number on the Order. The technicalities of how we are going to implement the interface will be laid out in the Tech Specs.
Thanks
in advance

You have double posted, please mark this one as "solved on my own" and refer to this thread
need help with interface development
Regards,
Rich Heilman

Need help with navigation within a spark list...

hey guys, so in my application when you click on a list item, it opens up an image, and along with the image a few buttons are created dynamically...
the image and the url/labels for the dynamic buttons is provided through an xml/xmlListCollection.
what i need help with is the url or more specifically when you click on one of these dynamic buttons it needs to navigate me to another part of an list or display a certain set of images that is not in my spark list...
please let me know if this makes no sence
the code i have is
<code>
    [Bindable] private var menuXml:XML;
    [Bindable] private var imgList:XMLListCollection = new XMLListCollection();
    [Bindable] private var navControl:XMLListCollection = new XMLListCollection();
    [Bindable] private var fullList:XMLListCollection = new XMLListCollection();
    private var returnedXml:XMLListCollection = new XMLListCollection();
    private var myXmlSource:XML = new XML();
    //[Bindable] private var xmlReturn:Object;
    private var currImage:int = 0;
    //public var userOpProv:XMLListCollection = new XMLListCollection();
    //private var troubleShootProvider:XMLListCollection = new XMLListCollection();
    private function myXml_resultHandeler(event:ResultEvent):void{
        userOptionProvider.source = event.result.apx32.userOptions.children();
        troubleShootProvider.source = event.result.apx32.troubleShooting.children();
        fullList.source = event.result.apx32.children();
        returnedXml.source = event.result[0].children();
        myXmlSource = event.result[0];
    private function myXml_faultHandler(event:FaultEvent):void{
        Alert.show("Error loading XML");
        Alert.show(event.fault.message);
    private function app_creationComplete(event:FlexEvent):void{
        userOptions.scroller.setStyle("horizontalScrollPolicy", ScrollPolicy.OFF);
        myXml.send();
        //trouble.scroller.setStyle("horizontalScrollPolicy", ScrollPolicy.OFF);
        myXml = new HTTPService();
        myXml.url = "modules/apx32/apx32TroubleshootingXml.xml";
        myXml.resultFormat = "e4x";
        myXml.addEventListener(ResultEvent.RESULT, myXml_resultHandeler);
        myXml.addEventListener(FaultEvent.FAULT, myXml_faultHandler);
        myXml.send();
    private function troubleShootChange(event:IndexChangeEvent):void{
        dynamicButtons.removeAllElements();
        navControl.source = troubleShootProvider[event.newIndex].children();
        currImage = 0;
        imgList.source = troubleShootProvider[event.newIndex].images.children();
        definition.source = imgList[currImage].@url;
        if(imgList[currImage].@details == "true"){
            if(imgList[currImage].buttons.@hasButtons == "true"){
                for each(var item:XML in imgList[currImage].buttons.children()){
                    var newButton:LinkButton = new LinkButton();
                    newButton.label = item.@name;
                    newButton.x = item.@posX;
                    newButton.y = item.@posY;
                    newButton.setStyle("skin", null);
                    newButton.styleName = "dynamicButtonStyle";
                    dynamicButtons.addElement(newButton);
        //var isMultiPage:String = navControl[2]["multiPages"];
        //trace(isMultiPage);
        //        if(isMultiPage){
        if(currImage >= imgList.length - 1){
            next.visible = false;
            back.visible = false;
        else{
            back.visible = false;
            next.visible = true;
    private function customButtonPressed(event:Event):void{
        if(imgList[currImage].button.@changeTo != ""){
    private function userOptionsChange(event:IndexChangeEvent):void{
        dynamicButtons.removeAllElements();
        navControl.source = userOptionProvider[event.newIndex].children();
        currImage = 0;
        imgList.source = userOptionProvider[event.newIndex].images.children();
        definition.source = imgList[currImage].@url;
        if(imgList[currImage].@details == "true"){
            if(imgList[currImage].buttons.@hasButtons == "true"){
                for each(var item:XML in imgList[currImage].buttons.children()){
                    var newButton:LinkButton = new LinkButton();
                    newButton.label = item.@name;
                    newButton.x = item.@posX;
                    newButton.y = item.@posY;
                    newButton.setStyle("skin", null);
                    newButton.styleName = "dynamicButtonStyle";
                    newButton.addEventListener(MouseEvent.MOUSE_DOWN, customButtonPressed);
                    dynamicButtons.addElement(newButton);
        var isMultiPage:String = navControl[2]["multiPages"];
        if(isMultiPage == "true"){
            if(navControl[2]["next"] == "NEXT STEP"){
                navContainer.x = 630;
            else{
                navContainer.x = 640;
            next.label = navControl[2]["next"];
            back.label = navControl[2]["back"];
        if(currImage >= imgList.length - 1){
            next.visible = false;
            back.visible = false;
        else{
            back.visible = false;
            next.visible = true;
    private function nextClickHandler(event:MouseEvent):void{
        currImage += 1;
        dynamicButtons.removeAllElements();
        if(currImage >= imgList.length-1){
            currImage = imgList.length - 1;
            //next.visible = false;
            next.label = "YOU'RE DONE";
        else
            next.label = navControl[2]["next"];
        back.visible = true;
        if(imgList[currImage].@details == "true"){
            if(imgList[currImage].buttons.@hasButtons == "true"){
                for each(var item:XML in imgList[currImage].buttons.children()){
                    var newButton:LinkButton = new LinkButton();
                    newButton.label = item.@name;
                    newButton.x = item.@posX;
                    newButton.y = item.@posY;
                    newButton.setStyle("skin", null);
                    newButton.styleName = "dynamicButtonStyle";
                    dynamicButtons.addElement(newButton);
        definition.source = imgList[currImage].@url;
    private function backClickHandler(event:MouseEvent):void{
        currImage -= 1;
        dynamicButtons.removeAllElements();
        if(currImage == 0){
            back.visible = false;
        next.visible = true;
        next.label = navControl[2]["next"];
        if(imgList[currImage].@details == "true"){
            if(imgList[currImage].buttons.@hasButtons == "true"){
                for each(var item:XML in imgList[currImage].buttons.children()){
                    var newButton:LinkButton = new LinkButton();
                    newButton.label = item.@name;
                    newButton.x = item.@posX;
                    newButton.y = item.@posY;
                    newButton.setStyle("skin", null);
                    newButton.styleName = "dynamicButtonStyle";
                    dynamicButtons.addElement(newButton);
        definition.source = imgList[currImage].@url;
</code>
i have attached a copy of the xml that i have right now to this post for reference...
any help will be greatly appretiated!!! i've been stuck on this problem for the last week and my project is due soon
again thank you in advance...

hey david... just nevermind my previous post... I was able to subclass a link button, so i now have two variables that get assigned to a link button,
one is "tabId" <-- contains the information on which tab to swtich to, and the second is, "changeTo"... this contans the label name which it needs to switch to
I'm just stuck on how to change my selected item in my tabNavigator/list
the code i have right now is
    private function customButtonPressed(event:Event):void{
        if(event.currentTarget.tabId == "troubleShooting"){
            for each(var item:Object in troubleShootProvider){
                if(item.@label == event.currentTarget.changeTo){
    private function userOptionsChange(event:IndexChangeEvent):void{
        dynamicButtons.removeAllElements();
        navControl.source = userOptionProvider[event.newIndex].children();
        currImage = 0;
        imgList.source = userOptionProvider[event.newIndex].images.children();
        definition.source = imgList[currImage].@url;
        if(imgList[currImage].@details == "true"){
            if(imgList[currImage].buttons.@hasButtons == "true"){
                for each(var item:XML in imgList[currImage].buttons.children()){
                    var newButton:customLinkButton = new customLinkButton();
                    newButton.label = item.@name;
                    newButton.tabId = item.@tab;
                    newButton.changeTo = item.@changeTo;
                    newButton.x = item.@posX;
                    newButton.y = item.@posY;
                    newButton.setStyle("skin", null);
                    newButton.styleName = "dynamicButtonStyle";
                    newButton.addEventListener(MouseEvent.MOUSE_DOWN, customButtonPressed);
                    dynamicButtons.addElement(newButton);
        var isMultiPage:String = navControl[2]["multiPages"];
        var videoPresent:String = navControl[1]["videoPresent"];
        if(videoPresent == "true"){
            if(isMultiPage != "true"){
                navContainer.x = 825;
        if(isMultiPage == "true"){
            if(navControl[2]["next"] == "NEXT STEP"){
                navContainer.x = 630;
            else{
                navContainer.x = 640;
            next.label = navControl[2]["next"];
            back.label = navControl[2]["back"];
        if(currImage >= imgList.length - 1){
            next.visible = false;
            back.visible = false;
        else{
            back.visible = false;
            next.visible = true;
as you know, my xml gets divided into two saperate xmllistcollections one is the userOptionProvider, and the troubleshootingProvider
as is in the following xml
<mx:TabNavigator id="tabNav" width="275" tabStyleName="tabStyle" fontWeight="bold" height="400" paddingTop="0"
                         tabWidth="137.5" creationPolicy="all" borderVisible="false">
            <mx:VBox label="USER OPTIONS" width="100%" height="100%" horizontalScrollPolicy="off" verticalScrollPolicy="off">
                <s:List id="userOptions" width="100%" height="100%" itemRenderer="modules.apx32.myComponents.listRenderer"
                        borderVisible="false" contentBackgroundColor="#e9e9e9"
                        change="userOptionsChange(event)">
                    <s:dataProvider>
                        <s:XMLListCollection id="userOptionProvider" />
                    </s:dataProvider>
                </s:List>
            </mx:VBox>
            <mx:VBox label="TROUBLESHOOTING">
                <s:List id="trouble" width="100%" height="100%" itemRenderer="modules.apx32.myComponents.listRenderer"
                        borderAlpha="0" borderVisible="false" contentBackgroundColor="#e9e9e9"
                        change="troubleShootChange(event)">
                    <s:dataProvider>
                        <s:XMLListCollection id="troubleShootProvider" />
                    </s:dataProvider>
                </s:List>
            </mx:VBox>
        </mx:TabNavigator>
Im having some trouble updating my list... basically change to the troubleshooting tab, and then select the one that i need...
hopefully that makes sence...

Urgently need help with this

Hi!!
I urgently need help with this:
When I compile this in Flex Builder 3 it says: The element type 'mx:Application' must be terminated by the matching end-tag '</mx:Application>'.
but I have this end tag in my file, but when I try to switch from source view to desgin view it says, that: >/mx:Script> expected to terminate element at line 71, this is right at the end of the .mxml file. I have actionscript(.as) file for scripting data.
This is the mxml code to terminate apllication tag which I did as you can see:
MXML code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundGradientAlphas="[1.0, 1.0]" backgroundGradientColors="[#007200, #000200]" width="1024" height="768" applicationComplete="popolni_vse()">
<mx:HTTPService id="bazaMME" url="lokalnabaza/baza_MME_svn.xml" showBusyCursor="true" resultFormat="e4x"/>
<mx:Script source="dajzaj.as"/>
<mx:states>
<mx:State name="Galerije">
    <mx:SetProperty target="{panel1}" name="title" value="Galerije MME"/>
    <mx:SetProperty target="{panel2}" name="title" value="opis slik"/>
    <mx:SetProperty target="{panel3}" name="title" value="Opis Galerije"/>
    <mx:AddChild relativeTo="{panel1}" position="lastChild">
    <mx:HorizontalList x="0" y="22" width="713.09863" height="157.39436" id="ListaslikGalerije"></mx:HorizontalList>
            </mx:AddChild>
            <mx:SetProperty target="{text1}" name="text" value="MME opisi galerij "/>
            <mx:AddChild relativeTo="{panel1}" position="lastChild">
                <mx:Label x="217" y="346" text="labela za test" id="izbr"/>
            </mx:AddChild>
            <mx:SetProperty target="{label1}" name="text" value="26. November 2009@08:06"/>
            <mx:SetProperty target="{label1}" name="x" value="845"/>
            <mx:SetProperty target="{label1}" name="width" value="169"/>
            <mx:SetProperty target="{Gale}" name="text" value="plac za Galerije"/>
        </mx:State>
        <mx:State name="Projekti"/>
    </mx:states>
<mx:MenuBar id="MMEMenu" labelField="@label" showRoot="true" fillAlphas="[1.0, 1.0]" fillColors="[#043D01, #000000]" color="#9EE499" x="8" y="24"
         itemClick="dajVsebino(event)" width="1006.1268" height="21.90141">
       <mx:XMLList id="MMEmenuModel">
             <menuitem label="O nas">
                 <menuitem label="reference podjetja" name="refMME" type="check" groupName="one"/>
                 <menuitem label="reference direktor" name="refdir" type="check" groupName="one"/>
              <menuitem label="Kontakt" name="podatMME" groupName="one" />
              <menuitem label="Kje smo" name="lokaMME" type="check" groupName="one" />
             </menuitem>
             <menuitem type="separator"/>
             <menuitem label="Galerija">
                 <menuitem label="Slovenija" name="galSvn" type="check" groupName="one"/>
                 <menuitem label="Nemčija" name="galDeu" type="check" groupName="one" />
             </menuitem>
             <menuitem type="separator"/>
             <menuitem label="projekti">
                 <menuitem label="Slovenija" name="projSvn" type="check" groupName="one"/>
                 <menuitem label="Nemčija" name="projDeu" type="check" groupName="one" />
                 <menuitem label="Madžarska" name="projHun" type="check" groupName="one"/>
             </menuitem>
         </mx:XMLList>
         </mx:MenuBar>
    <mx:Label x="845" y="10" text="25. November 2009@08:21" color="#FFFFFF" width="169" height="18.02817" id="label1"/>
    <mx:Label x="746" y="10" text="zadnja posodobitev:" color="#FFFFFF"/>
    <mx:Panel x="9" y="57" width="743.02814" height="688.4507" layout="absolute" title="Plac za Vsebino" id="panel1">
        <mx:Text x="0" y="-0.1" text="MME vsebina" width="722.95776" height="648.4507" id="Gale"/>
    </mx:Panel>
    <mx:Label x="197.25" y="748.45" color="#FFFFFF" text="Copyright © 2009 MME d.o.o." fontSize="12" width="228.73239" height="20"/>
    <mx:Label x="463.35" y="748.45" text="izdelava spletnih strani: FACTUM d.o.o." color="#FBFDFD" fontSize="12" width="287.60565" height="20"/>
    <mx:Panel x="759" y="53" width="250" height="705.07043" layout="absolute" title="Plac za hitre novice" id="panel3">
        <mx:Text x="0" y="0" text="MME novice" width="230" height="665.07043" id="text1"/>
        <mx:Panel x="-10" y="325.35" width="250" height="336.61972" layout="absolute" title="začasna panela" color="#000203" themeColor="#4BA247" cornerRadius="10" backgroundColor="#4B9539" id="panel2">
            <mx:Label x="145" y="53" text="vrednost" id="spremmen"/>
            <mx:Label x="125" y="78" text="Label"/>
            <mx:Label x="125" y="103" text="Label"/>
            <mx:Label x="0" y="53" text="spremenljivka iz Menuja:"/>
            <mx:Label x="45" y="78" text="Label"/>
            <mx:Label x="45" y="103" text="Label"/>
        </mx:Panel>
    </mx:Panel>
    <mx:Label x="9.9" y="10" text="plac za naslov MME vsebine" id="MMEnaslov" color="#040000"/>
     </mx:states></mx:Application>

I know it's been a while but… did you fix this?
It looks to me like you are terminating the <mx:Application> tag at the top. The opening tag should end like this: resultFormat="e4x">, not resultFormat="e4x"/> (Remove the /).
Carlos

Need help with reviewer CS4

I am usung the Captivate reviewer to distribute draft modules.
The problem I am havving is the .LOCK file - when someone goes to review the module, they have to specify the location of a temp file. (the .lock file). When they have finished that module, then they have to either specify a new location for the next module, ot manually delete the lock file.
Is there a way to disable the comments logging feature, or have the lock file automatically deleted?
Thanks
Terry

Thank you.
Regards,
Michael J. Sheehan allelois
Date: Mon, 17 Aug 2009 18:48:09 -0600
From: [email protected]
To: [email protected]
Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
Hi there
I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
Cheers... Rick
>

Help with Flex based popup windows and data population.

Hello, I need a bit of help with Flex popups. I have a flex
application that uses a popup window when you click on a button and
displays information about the image above the button the user
clicked. I have about 4 images and I need to be able to display
information about each of them through the popup window when users
click on the buttons below the image.
At this time, I am trying to do this from somewhat of a
"static" point of view because I do not believe my hosting company
supports Flex Data services. You will find my code below.
First File.
<?xml version="1.0" encoding="utf-8"?>

<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" width="850" height="750"
cornerRadius="10" borderColor="#000000"
backgroundGradientColors="[#1b3434, #000000]">

<mx:Script>
<![CDATA[
import mx.managers.PopUpManager;
[Bindable]
private var win:IMSAI;
private function init():void{}
private function createPopup():void{
win=IMSAI(PopUpManager.createPopUp(this,IMSAI,true));
win.title = 'IMSAI.Net';
win.x = -500;
win.y = 0;
customMove.end();
customMove.play();
]]>
</mx:Script>
<mx:Style>
TitleWindow {
borderStyle:solid;
borderThickness:2;
</mx:Style>
<mx:Parallel id="customMove" target="{win}">
<mx:Move duration="2000" xTo="{(stage.width - win.width)
/ 2}" yTo="{(stage.height - win.height) / 2}" />
<mx:WipeDown duration="2000" />
</mx:Parallel>
This is the code to trigger the popup when a user clicks on
the button. The code below is the code for the popup.
<?xml version="1.0" encoding="utf-8"?>
<mx:TitleWindow xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="vertical" creationComplete="init()"
close="PopUpManager.removePopUp(this)"
showCloseButton="true" alpha=".8"
headerColors="[#000000,#1F3F62]" color="#FFFFFF"
minHeight="200" minWidth="300"
backgroundColor="#000000" title="IMSAI.net" width="520"
height="394" verticalAlign="middle" horizontalAlign="center">
<mx:Script>
<![CDATA[
import mx.managers.PopUpManager;
private function init():void{}
]]>
</mx:Script>
<mx:Canvas width="470" height="338">
<mx:Image x="10" y="10" width="140" height="103">
<mx:source>file:///C|/ColdFusion8/wwwroot/IMSAI/Web-App/Site_Images/IMSAI
Final Movie.swf</mx:source>
</mx:Image>
<mx:Text x="10" y="121" text="Description:" width="75"
height="25" fontWeight="bold" color="#ff0000"/>
<mx:Text x="158" y="10" text="Client:" width="52"
height="28" fontWeight="bold" color="#ff0000"/>
<mx:Text x="196" y="10" text="IMSAI Microcomputers
& Fischer-Freitas Company" width="252" height="39"/>
<mx:Text x="159" y="46" text="Industry:"
fontWeight="bold" color="#ff0000"/>
<mx:Text x="216" y="46" text="Computer &
Microcontroller Manufacturing." width="232" height="35"/>
<mx:Text x="83" y="121" text="IMSAI.net is the front-end
web application for IMSAI Computer " width="355"/>
<mx:Text x="10" y="136" text="manufacturing, customer
support, and order processing. Driven by a Microsoft database
back-end, this application includes rich flash forms, site search
capabilities, and flash content. Currently under phase II of a
three phase development plan, the e-commerce logic and processing
capabilities are under development. Once finished, this application
will be able to process orders provide customers with instant order
confirmation numbers, shipment dates, and payment processing."
width="428"/>
<mx:Text x="10" y="244" text="Technologies:"
fontWeight="bold" color="#ff0000"/>
<mx:Image x="100" y="244" width="50" height="50">
<mx:source>file:///C|/ColdFusion8/wwwroot/Sapphire
Development/content/cf8icon.jpg</mx:source>
</mx:Image>
<mx:Image x="244" y="244" width="50" height="50">
<mx:source>file:///C|/ColdFusion8/wwwroot/Sapphire
Development/content/flashlogo.jpg</mx:source>
</mx:Image>
<mx:Text x="53" y="290" text="Coldfusion 8 Enterprise"
height="30"/>
<mx:Text x="230" y="290" text="Adobe Flash 8"/>
</mx:Canvas>
What I want to do is either be able to create a popup file
for each button and photo, or find a way to pass a name like a
button ID that corresponds to a XML data structure and then
provides the appropriate data for the photo. I have tried altering
the first page of code with the "public" declaration to allow for a
second popup file for each button and image, but the IDE won't
allow me to do such because it creates errors stating I can only
have one public declaration of the kind and function above per
application. Help resolving this would be greatly appreciated.
Thank you.

I have an idea of what I want to do. I am just having
difficulty articulating how to go about such. I know I want to find
a way so that if a user clicks on button 1, button 1 will send some
kind of variable. For example, a user clicks Btn1 under a picture.
Btn1 sends some kind of variable or binding to a data structure
which returns the picture's description, price, etc. and calls the
popup to display that data in a form like manner. Then the user
click Btn2 which does the same thing. The only purpose of the popup
is to display the data.
Do I create a data structure with a related name to say a
button name so when the btn is clicked, the a variable title btn1
will prepend itself to the data structure like
{btn1.imagename}
{btn1.price}
{btn1.description}.
I want each btn to call a different set of data about each
picture because right now, the code I have is allowing me multiple
buttons, but is just displays the popup. Is there a way to create a
separate popup window for each button? Thats seems as though it
would be easier. Thank you for your help.

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Need help with Flex Modules

Similar Messages

Maybe you are looking for