Need help with frozen Archive and Install

I'm trying to run an archive and install for my intel iMac, OS 10.4.11. I get through the first disk fine, but after I put in the 2nd install disk, it gets all the way to the "finishing installation" and then won't move past "running GarageBand Demo Songs Installer Script". it says less than a minute remaining, and the downloading bar is swirling, but there is nothing happening and it hangs here for hours. I've tried restarting, but it will only ask me to load the 2nd disk again, and the same thing happens over and over. Apple even sent me a new install disk 2, and the same thing happened, so I know it's not the disk. Is there a way to push past this?
I did a disk utility repair and it said everything was fine.
WZZZ suggested a custom installation, but I haven't tried it yet because I'm worried I might lose the data on my hard drive. (Stupidly) none of it is backed up. Any advice? Do you think I'll lose my data if I force it start over with disk 1 and do a custom install?
If not, is that the best thing to do?

Hi there, WZZZ is one sharp guy, go for it, (known him since he was knee high to a Grasshopper!
Do you think I'll lose my data if I force it start over with disk 1 and do a custom install?
At worst we should maybe only have complications with several Previous System Folders, but after forcing shutdown reboot do what WZZZ pointed to...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
That second Disk thing happens frequently, the best way around it is to do a Custom install, and eliminate enough Printer Drivers, Languages, Fonts, and Applications you don't need... then it may skip #2 altogether.
http://support.apple.com/kb/HT1442

Similar Messages

Need help with a download and install problem with PS Elements-Elements opens but Premier has error popup

I purchased PS Elements and Premier Elements through Academic Superstore as a download on Aug. 8, 2014. I am installing on a MAC Book Pro 10.9.4, and have tried reinstalling 3 times. I also searched the error messages on support and could not find the error I am getting. Every time I am able to open the Elements file will open and work, but the Premier file has a window pop up that says: The Following disk images couldn't be opened: Image - PremiereElements_12_WWEFDJ.dmg Reason - image not recognized. Does anyone have a solution?

PremiereElements_12_WWEFDJ.dmg is the installation file. http://www.ofzenandcomputing.com/how-to-install-dmg-files-mac/
if you're seeing that message when trying to install pre 12, you have a corrupt download. redownload:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Need help with Blog, Wiki and Gallery

Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh Singh

Hello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/

Need help with Airport Express and so on.

Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

Need help with Page Layout and Background Scaling

hello, everyone.
I am in the process of designing a new website for myself,
and while I was researching nicely designed pages to use as
inspiration, I stumbled upon this site:
http://www.jeffsarmiento.com/
obviously, the design is very impressive, but it also
incorporates a lot of web mechanics that I have been trying to
figure out, so I will use this page as an example.
one thing I need help with is backgrounds. as you can see in
the posted website, the creator used a seamlessly tiled paper
texture to display the bulk of his content on. also make not of the
pattern that is located to the left of the paper texture. how do I
create seamless backgrounds like this that will scale to fit any
amount of content or any resolution? I can't imagine that the guy
that made that site created a new size background every time he
made an update, so there has to be an easier way.
the second thing that I am having trouble with is general
site layout. I have read that most sites used series of invisible
tables to organize there content, but when I open the source of
this page in dreamweaver, he was using something different. div
tags? should I be using these? who do I use them? are there any
general layout tips that someone could pass on to me? perhaps a
link to a good tutorial?
please help me. i am very confused.
thanks so much.

IMO not a good site to emulate. To wit:
Top background image:
http://www.jeffsarmiento.com/images/bg-top.jpg;
745px
x 350px 137K
Main background image:
http://www.jeffsarmiento.com/images/bg-tile.jpg;
745px x 950px 130K
Total page size: 454K (Check here:
www.websiteoptimization.com)
Website usability experts routinely recommend a maximum page
size of ~80K
Check out the We We Scale @ www.FutureNowInc.com/wewe/ where
they suggest,
"You speak about yourself approximately 0,003 times as often
as you speak
about your customers. Might that have an impact on your
effectiveness?"
That is 100% consistent with the #1 Web Design mistake:
"Believing people
care about you and your web site." or to phrase more
expansively, "Our site
tries to tell you how wonderful we are as a company, but not
how we're going
to solve your problems."
www.sitepoint.com has some excellent books on making a
website actually
attractive and usable at the same time.
Walt
"beWILLdered_" <[email protected]> wrote in
message
news:[email protected]...
> hello, everyone.
> I am in the process of designing a new website for
myself, and while I was
> researching nicely designed pages to use as inspiration,
I stumbled upon
> this
> site:
>
http://www.jeffsarmiento.com/
> obviously, the design is very impressive, but it also
incorporates a lot
> of
> web mechanics that I have been trying to figure out, so
I will use this
> page as
> an example.
> one thing I need help with is backgrounds. as you can
see in the posted
> website, the creator used a seamlessly tiled paper
texture to display the
> bulk
> of his content on. also make not of the pattern that is
located to the
> left of
> the paper texture. how do I create seamless backgrounds
like this that
> will
> scale to fit any amount of content or any resolution? I
can't imagine that
> the
> guy that made that site created a new size background
every time he made
> an
> update, so there has to be an easier way.
> the second thing that I am having trouble with is
general site layout. I
> have
> read that most sites used series of invisible tables to
organize there
> content,
> but when I open the source of this page in dreamweaver,
he was using
> something
> different. div tags? should I be using these? who do I
use them? are there
> any
> general layout tips that someone could pass on to me?
perhaps a link to a
> good
> tutorial?
> please help me. i am very confused.
>
> thanks so much.
>

Need help with saving data and keeping table history for one BP

Hi all
I need help with this one ,
Scenario:
When adding a new vendor on the system the vendor is suppose to have a tax clearance certificate and it has an expiry date, so after the certificate has expired a new one is submitted by the vendor.
So i need to know how to have SBO fullfil this requirement ?
Hope it's clear .
Thanks
Bongani

Hi
I don't have a problem with the query that I know I've got to write , the problem is saving the tax clearance certificate and along side it , its the expiry date.
I'm using South African localization.
Thanks

Need help with show/hide and layers moving

I'm more of a designer, so I don't know code or CSS well at
all. I'm doing an online portfolio for a class and need help with
layers not staying in place in different browsers. The portfolio is
created with a table, but I wanted to use the show/hide function
for thumbnails of work. Are layers the only way you can use this
function? I read layers don't work well with tables, so how else
can I make it so when you mouse over a thumbnail, the larger image
appears in another cell?

> I don't know code or CSS well at all.
That's unfortunate.
> layers not staying in place in different browsers.
Layers don't move. But the rest of your page does.
Before you get too wrapped up in layers, though, please read
this -
http://www.great-web-sights.com/g_layerlaws.asp
They are not good when be used as a primary layout method.
> I read layers don't work well with tables
They work fine with tables - but you have to understand both
tables and
layers to use them.
Why not show us your page, so we can see what you are
struggling with?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Bobbi67" <[email protected]> wrote in
message
news:ertd9h$h3m$[email protected]..
> I'm more of a designer, so I don't know code or CSS well
at all. I'm doing
> an
> online portfolio for a class and need help with layers
not staying in
> place in
> different browsers. The portfolio is created with a
table, but I wanted to
> use
> the show/hide function for thumbnails of work. Are
layers the only way you
> can
> use this function? I read layers don't work well with
tables, so how else
> can I
> make it so when you mouse over a thumbnail, the larger
image appears in
> another
> cell?
>

Need help with Apps misbehaving and upgrading the MacOS: The all-in-one post. ;)

Hi there,
So, I've been browsing the SL and Mavericks forums for the last days but although I have fetched some useful tips and answers, still need some help. Let me put it diary-style so I can be more concise ;)
Here's my current system profile:
iMac 27" (aluminium back- if I'm no wrong, from around late 2009-mid 2010)
MacOS 10.6.1 Never updated.
3.06 Ghz Intel Core2 Duo
4Gb RAM
LaCie Big Disk via FireWire 800
Internet access via Ethernet port (cable)
And here's The Issues Log:
– Day one: First ever Kernel Panic. Restart. Nothing (apparently) wrong.
– 3 weeks elapsed: Second Kernel Panic. Same. iMac restarts fine. Apps fine. No missing files. No misbehaviour experiences.
– After a month or so: One morning, Skype decides on its own to stop launching. The night before, I chatted with one of my clients, fine as always, but at the next day, nothing. Computer is usually shut off for the night. And so it was that night. Updated Skype and also did all the guest account trick / repaired permissions / repair ACLs. Nothing worked. Overwrote the Skype app with a former functioning version I have in an MacOS 10.5 system. Didn't work. Now I have to chat on the MacOS 10.5 computer. No good.
– 15 days ago or so: After realising that I no longer have my HP1515n printer (it ran out of inks and thrashed it. It costs more to refill than to buy a new one), I deleted the printer from the printers list in the System Prefs Pane.
– Last week: Acrobat (CS4) won't launch a PDF file and freezes. Spinning beach ball. Force quit and try opening the PDF file again. Freezes again. And again. And again. With that file and every other PDF.
Photoshop CS5 fails to open or crashes when attempting to open any jpg or tiff file. InDesign and Illustrator CS5 are frozen and had to force quit both. MacOS 10.5
Restart the iMac thinking it is just a "common" bad day and hoping everything will be alright after the restart, but nope.
Not only the CS5 stops working; MSOffice stops working too. Spinning beach ball. Begin to suspect of the deletion of the printer, however, I also deleted the same printer in the above mentioned 10.5 system and I'm not experiencing anything strange. Reinstalled the HP drivers but nothing remarkable happens.
Then, try to uninstall CS5, CS4, Office, etc. Try to reinstall Acrobat CS4 and the CS5 apps. Reinstall Office. Nothing. Just Outlook works.
Since I had to desperately meet deadlines, convinced a colleague to come over to the studio and -I know, I know- allowed me to install a copy of CS6. It seems to work fine, except for Acrobat, which randomly freezes/hangs/works and Photoshop, which works fine unless you want to open a layered file containing text layers or if you want to type text on a normal file, because it freezes as soon as the Text Tool is pressed in the toolbar, of course, spinning beach ball again.
Well, Illustrator CS6 sometimes shows a strange black thin frame overlaid on the interface but goes away by switching to another workspace and then back to the current. InDesign CS6 seems to be fine and making PDFs as expected. However, as I said before, it is pure luck if Acrobat accepts to open the file or even if it launches. Spinning beach ball when freezing/hanging.
As a method for eliminating possible culprits, did a clean up of the Suitcase Fusion database, removed duplicate and a few (less than 10) corrupted fonts.
Removed completely MSOffice reinstalled and updated. Nothing. Now I neither have MSoffice running.
I am no rookie but I can't even imagine what can cause such amount of misbehaviour, (kernel panics have something to do? malware? lack of system updates? MacHD is damaged?) so I'm thinking of a few scenarios:
Backing up my projects and user folder –anything else to backup? (In fact I've already done that)– and:
1. Do a clean install. Not sure if it will be best to completely erase the whole drive or if a standard reinstallation will be enough.
2. Take the machine to a Genius Bar to see if there's anything that can be done without major OS messes.
3. Erase the drive and go through the Mavericks upgrading (SL to Ln to MLn to Mavcks), although not sure if this upgrade is worth yet.
4. Replace HD for a brand new one and either step 1 or 3.
5. As a complement, I'm thinking of adding more RAM.
Well. It is really the first time I don't know what to do. I have work to do and would not want to face a week away from my main computer and since most of the files are CS5-6 and hence, can't move to my wife's iMac...
Apologies if this post feels too long, but I will truly appreciate any kind of input and advice on one of more of the issues mentioned in this post.
And if it fits best in any other forum, please also let me know.
Cheers and thanks in advantage.

You have to use the Base Station Menu on the Menu Bar at the very top of your screen.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Need help with WinXP 64 and raid please...

First off let me just say that for the past week or two I've been lurking on this forum while building my first 64 bit pc and I just want to say that all of your advice, suggestions, tips, and workarounds have proven to be invaluable. A sincere, heartfelt thanks to everyone here. Like many of yours, my build has also been problematic. In fact, I guess I'd have to call it a pain in the ass. I can't imagine having done it without your help by using trial & error, so once again; thanks! Now, on to my ? My plan was to have one PATA 40gb HD to house 2 OS's on 2 partitions; a dual boot with XP and XP64, AND one RAID 0 made up of 2 160gb SATA HD's for everything else (actually the plan was to put the OS's on a Raptor but $$$). Now here's the prob: XP's up and running fine but when I try installing XP64 and it asks for the RAID drivers, it won't take them. It says they're not for a 64 bit OS. ? Am I the only one that thinks that odd? Isn't that the ultimate point of all this? So am I missing something? I d/l'd the 64 bit drivers from NVidia, is there a way to extract RAID drivers from them to a floppy? Also, I'd like both OS's to utilize the same RAID array for programs, storage etc. Is that a problem (my first time installing RAID )? And if it WILL work, is it going to insist on wiping the drives and starting fresh? I hope not since since I've already got a ton of stuff on there. Anyway, thanks in advance for any and all help you might offer. Keep up the good work. -Glyph

Thanks for your quick responses. So are you saying that if my OS isn't on the RAID array then I don't need the RAID drivers during setup? That's interesting. It's not how I understood it to be (not to say your wrong though). I'm pretty sure I needed them in WinXP, though it's on a different disc as well. Now that I think about it, maybe I could've waited and installed them through device manager with the same end result? I guess I'll try it and find out. And are there any ideas regarding the 2nd part of my question re data loss? I'd really hate to start from scratch at this point.

Need help with n95-3 and PTT

Hello, I bought an unlocked N95-3 and I have AT&T USA. Does anyone know if your able to use the PTT program with AT&T and if so how? I assume you have to take your phone in or something to get it installed if its even possible. Any help would be greatly appreciated and i apologize if this is a repost but I couldnt find anything for the -3

you'll need to preload the images if you want them to appear
close-to-immediately after your button press.
to load them with the button press:

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

FCP Novice needs help with video quality and FCP 5!!

Hi,
I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
The final footaage looks like an old VHS recording that's a year or two old!
Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
Is there some presets I should be working to?
I'm tearing my hair out! Help!

Hi Guys,
thanx for your replies.
here's the latest:
Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
Does this make sense to you guys or am I still doing something very wrong?
Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
any more help guys would be greatfully appreciated.

Need Help with complex query and computing values

I have an issue trying to combine data from several tables. I need help trying to compute the "Total Hours", "Max Pressure" ,"Average Pressure" while displaying the "Manufacturer",
"Part Type" , "Serial Number", "District", "Status","Truck Type",and "truck number" for a certain Part on all Trucks. I need to be able check and see if the serial number was on
a particular job and calculate the hours of that serial number if it was on that job and the jobdate falls between the install date and removal date. Ive tried but keep getting either
repeating rows, total hrs of the truck instead of the serial number. Ive considered doing a pivot to display it but have been having trouble putting it together.
table 1
(*records of parts*)
Contains serial number,truck number, part type, part number, install date, removal date, status
table 2
(*records of Jobs*)
contains Jobnumber, JobStartdate, Max pressure, average pressure, and Totalhrs
table 3
(records related to jobs and trucks)
contains jobnumber, district , and truck numbers
Table 4
(records of manufacturers and part numbers)
contains partnumber, manufacturer name, and truck type
I would like to get it to show like below
SerialNo   PrtType
MFG      TruckNo
TrkType    TtlHrs
   MaxPr   AvgPr
  Status
Dst
AB345     1200series
NGK        2G34
Boss X       400     10,000
9500  NonOp
NE
Thanks in advance

Hope this helps
Note: (Date of Mar 1 2014 was just extended to a further date so the system would know that its still operating when calculating current hours)
Table 1
SerialNo    TruckNo InstallDate RemovalDate      Status       PartNo      PartType
BJ1002       F917   2013-09-17   2014-03-01   Oper         L871235       BJ 3000 GL
CWS1002   F104   2012-11-21 2013-03-29   NonOper   L76088-450 CWS 2000
CWS1003   F104   2013-04-24   2013-08-01   NonOper   L76088-450 CWS 2000
CWS1005   F187   2012-11-21 2013-04-04   NonOper   L76088-450   CWS 2000
CWS1006   F187 2013-04-24   2013-06-30   NonOper   L76088-450 CWS 2000
CWS1007   F187   2013-06-30   2013-03-01   Oper        L76088-450 CWS 2000
CWS1009   2F60   2013-05-05   2013-03-01   Oper        L76088-450 CWS 2000
CWS1011   F809   2013-05-28   2013-08-28   NonOper   L76088-400 CWS 2000
CWS1013   F990 2013-06-11 2013-10-29   NonOper   L76088-450   CWS 2000
CWS1015   F783   2013-06-28   2013-03-01   Oper        L76088-450 CWS 2000
Table 2
JobNumber   Date                 District        PrAvTreat PrMaxTr TotalHrs
553811287   2012-01-19    Fairmount   7337        8319     1.53
652110088    2012-08-20    San Antonio 6340       7075      0.47
652110090    2012-08-21    San Antonio 6134       7131      0.62
652110091    2012-08-22    San Antonio 6180       2950      0.58
652110092    2012-08-23    San Antonio  5959       6789      0.64
652110093    2012-08-23    San Antonio 6165       7466      0.62
Table 3
TruckNo District    JobNumber
1F01      Odessa 10011012329
1F01      Odessa   10011012333
1F01      Odessa   10011014831
1F01      Odessa   10011014834
1F01      Odessa   10011012332
1F01      Odessa   10011012328
1F01      Odessa   10011014829
Table 4
PartNumber    Manufacturer  TruckType
L322020-2     Jimmy Dean   Ford T
L322738-2     Lucas             Ford T
L47869-1       Jimmy Dean   Ford T
L76070-650   NGK               Ford T
Sam Howard

Windows 8.1 need help with Windows Updates and Start menu Or fix my old Windows Xp system

My beloved windows Xp has gave up after many years of working well. It stopped working a few days ago after a lightening strike.
I got this Windows 8.1 computer a few month ago but it seems to have a problem. I stopped using it after could not get start menu to work and when back to my Windows XP system.
First problem is the start menu is not there. I tried installing something and it says it will take control or something and screen goes black. I clicked canceled quickly in order not to get a virus.
Where is the start menu?
Second problem, Windows updates does not want to update because it needs Windows 8.1 update. This computer is already Windows 8.1. There I canceled it since it was mostly a virus. Now updates are not working.
If those can not be fixed, how can i fix my Windows Xp to get it back. It does not turn on, I press button and nothing happens. Is this something easy to fix?

Another user discovers that Windows 8.1 is not at all of what it should be.
There is no Start Menu in Windows 8 or 8.1. However, you can restore your desktop start menu with a very good freeware application:
Classic Shell
Windows Update comes with Windows 8.1. There is nothing special you have to do.
It kind of sounds like you've been a bit too quick to download and run whatever you find on the Internet. You should always research any software you're considering downloading/installing ahead of time. Google it. See what others say
about it. Ask on forums. In order to use Windows effectively and safely you need to expand your knowledge and become a more sophisticated user.
If you think your new system has become infected, you might want to consider Refreshing or Resetting it to a clean state, or at least visiting one of the anti-malware forums and getting some advice on cleaning it up. But beware, a lot
of "blind leading the blind" happens on forums. Always try to read between the lines, and question what people say.
You could consider leaving XP behind. Its time has come and gone, and pretty much any newer version of Windows can actually give you better service than XP - once you get it tuned up.
It's possible to make Windows 8.1 more functional than XP and about as functional as Windows 7, but it takes a fair bit of effort in reconfiguration and installation of some well-known 3rd party applications that are good (which, unfortunately, most
on the internet are not).
Good luck to you.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Need help with load balancing and DNS proxy

Hi,
I need help on how to configure my router so it will work with my DNS proxy and load balancing.
I have a Linksys LRT224 router. I have two broadband connections from two separate ISPs,500Mbps each (WAN1 & WAN2). WAN1 has a static IP and WAN2 is dynamic assigned. I use Unlocator (www.unlocator.com) so I can access geographically restricted sites (Pandora, Netflix, etc.).
The problem I have is that unlocator registers only one IP address (WAN1 address) and since I am doing load balancing I have no way of knowing if the DNS request will go through the registered IP (WAN1) or through the other (WAN2). I am not an expert in routing or networking but I'm guessing I have a way of configuring the router so all the DNS requests go out through WAN1, right?
In the router's Dual WAN config page there is a section for Protocol Binding. I tried to configure but only managed to screw up the internet at home. I used:
DNS[UDP/53-53]->192.168.1.1-192.168.1.254(0.0.0.0-0.0.0.0)WAN2
Any help or suggestions are appreciated.
Alex

Good solution though. That's probably the only way you could do true Load Balancing anyway.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Need help with frozen Archive and Install

Similar Messages

Maybe you are looking for