Need help with full screen slideshow image quality

I am looking to display some images with full screen slideshow. The images I add are very large, over 5000 wide. When I publish the site some images retain their quality while others lose it and look like crap. Why would this be and how can I fix it. I tried to resize them to the 2560x1707 that muse does, and then add them. This doesn't change the end result of poor quality.

Go to Assets Panel and locate the image you want to use at original size. Right click the image and chose 'Import Larger Size'.
See if that helps retain quality for that image, since Muse does not resize/interpolate that image for you.
Cheers,
Vikas

Similar Messages

  • Adobe Muse Full Screen Slideshow image quality

    Hi,
    I have a question. Is it natural that if i add an image to my slideshow the quality of it in adobe muse or in my browser is worse than original size? My image is rather big 3400x and when it is exported to muse i see pixels and blur effect etc. Is it possible to not resample image quality in muse is there any option to stay with original quality??

    Hi,
    The way full screen slideshow is currently implemented Muse is resampling the hero images to the size they are in Design view. For most cases that will work fine, but there's no easy way to force a higher resolution image to be output. The only workaround that comes to mind would be to replace the image after publish/upload/export.
    Hope this helps.
    Regards,
    Aish

  • Website with Full Screen Background Images

    I'm trying to create a website with full screen background images (or  possibly, a video) that will crop to the browser window. It's also  important that the image be center-justified. The Die Antwoord site does  pretty much what I'm trying to accomplish. I'd also like to know how  they can use such high resolution images. If I try to use a high res  image, the file size is enormous. Another site that uses similar  technology only with a video is the TV on the Radio site.
    I  am fairly new to Flash so please forgive me if this is a rudimentary question.  Any help will be greatly appreciated.

    Hi Bob,
    Thanks for your reply.
    What I'm concerned about is the crispness of my full-page images. Am I right in assuming with a PDF folio, static images won't be as crisp? Is there a way to maintain its sharpness?
    M

  • Full screen preview image quality?

    I've recently taken up the 'Creative Cloud plan for Photoshop customers' and am getting to grips with Lightroom for the first time; previously I've used CS6 and Elements 9 & 11.
    However, I have a problem with the quality of full screen previews of images on my secondary monitor, similar to the problem I encountered with Elements 11, discussed in another thread here: http://forums.adobe.com/message/5358611#5358611   (the full screen preview whilst OK was not as sharp with PSE 11 as with PSE 9 due to a different algorhythm used the produce the preview quicker)
    I also use FastStone viewer & that too renders the full screen previews much sharper. It seems that with Lightroom too, full screen previews are just not that sharp - OK but not bitingly sharp. I've even noticed that when opening an image for editing in LR, it doesn't look as sharp as if openined in Photoshop CS6 or CC.
    Any thoughts folks? Is there a way to make full screen previews sharper? Of course it could be argued i suppose that PSE 9, FastStone & CS over-sharpen... or even that the 'problem' may not be so apparent on another monitor ( I have my full screen previews on a Dell Ultrasharp 20" 1600 x 1200).

    Hi,
    The way full screen slideshow is currently implemented Muse is resampling the hero images to the size they are in Design view. For most cases that will work fine, but there's no easy way to force a higher resolution image to be output. The only workaround that comes to mind would be to replace the image after publish/upload/export.
    Hope this helps.
    Regards,
    Aish

  • Full Screen Slideshow image sizing issue

    Hi all,
    I am creating full screen slideshow for the first time.
    I have added the slideshow into the DEISGN mode and it all looks perfectly fine. However, once I am in PREVIEW or PREVIEW IN BROWSER mode the image is at fullscreen but it seems to be zoomed in or cropped tighter.
    The slideshow images are set to FILL FRAME PROPORTIONALLY. I have tried experimenting with different settings, page sizes, changing margins, changing header/footer guides, different image sizes etc... but no success.
    I am on a 27-inch (2560 x 1440) IMAC.
    help???
    I have attached two images to show what I mean. Notice in PREVIEW mode how the image appears to be tighter/cropped/magnified.
    Thanks

    Thanks Zac,
    So do you think I should change to Fit Content Proportionally?
    And then recrop my images so the aspect ratios match my browser window or the page dimensions in Muse?
    Sorry if these are stupid questions. I'm new to all this

  • I need help with searching for an image inside another image

    I need to write a program that checks for a specific image (a jpg) inside another, larger, image (a jpg). If so, it returns a value of true. Can anyone help me?
    Winner takes all. First person to solve this gets 10 dukes.
    Please help.

    Hi,
    I would use a full screen image Sequence made with png for transparency and put your article behind. no auto play, stop at first and last image. and information for swipe to display article.

  • OS X LION Issues with Full-Screen; iPhoto, Image Capture & Mail

    Hello,
    I'm experiencing un-Apple-like issues (bugs) with Lion in Full-Screen mode.
    For example - iPhoto doesn't seem to like Full-Screen mode. If iPhoto is open and I connect a camera, for which I prefer Image Capture to retrieve my pics... Image Capture opens 'behind' the full-screen iPhoto, but I can't get to it. Image Capture shows as open on the menu bar in iPhoto's full-screen mode. If I go to the desktop (where it should be opening) Image Capture isn't 'on top' and clicking it takes me back to iPhoto full-screen
    Similarly, if I get mail and return to the desktop (the only way to see the dock) and I click on the 'Mail' app icon - I am catapulted into Image Capture... or iPhoto. Returning to the Desktop to click the Mail icon from the dock... takes me to Image Capture... or iPhoto. The 3rd try takes me to the Mail.app which is usually always open and in full-screen mode.
    While I'm complaining about bugs, I'd like to mention that I am fully dismayed by the loss of control in full-screen mode when using apps such as Mail or iPhoto. The Mail app opens an email to edit (such as a reply) but you can't access any other mail docs to 'cut and paste' info from. I can only click SEND or CANCEL.
    What if I don't want to CANCEL? I just want to go to another email and cut a piece to paste.. I have to exit full-screen mode which allows me to open two email documents at once, then cut and paste. Essentially Mail in Full-Screen is only a reader... not a work area. I can only access the document I have open, since it greys out the Message Viewer. You can't click on the message viewer nor access any of the features of Mail.app. You can only write your email and either Cancel or Send. Where is the 'hold on a second while I go cut and paste'? I don't want to cancel.
    Can't seem to use Safari since I'm constantly three-finger swiping it away. My cursor hovers over a text field and suddenly it's zooming in and locks text input. I have to iPhone-like swipe to expand to exit this inadvertent partial (very slight) zoom. Sometimes the zoom is so partial that I can't figure out what's going on until I just exit full-screen mode, close the window and start over.
    Seems like I'm starting over and over and over... just to do simple things. Inadvertent zooming, inadvertent 3-finger returning to Desktop, inadvertent changing apps... ugh.
    I'm willing to let go of the old and embrace the new future but so far it's been pretty uncomfortable for me to constantly monitor my overly sensitive trackpad gesturing combined with constant bugs and glitches. I'll save complaining about iPhoto's over-simplification (apparently for dummies) like the new Edit menu, Export menu, etc.. since it's more iLife than Lion related. Rate Lion: 2 out of 5 stars for ease of use & features complicated by unrefined software issues.

    I've tried follwoing these instructions but I have an issue with
    # Create snort user. The intention is to let user snort have access only to the snort database.
    $ sudo createuser -U _postgres -P snort
    Password:
    Enter password for new role:
    Enter it again:
    Shall the new role be a superuser? (y/n) n
    Shall the new role be allowed to create databases? (y/n) n
    Shall the new role be allowed to create more new roles? (y/n) n
    It keeps telling me "could not connect to database postgres: could not connect to server: No such file or directory"
    I'm running OSX Mountain Lion, and have verified using serveradmin status postgres that it is up and running.

  • Mac user needs help with photoshop screen and tool bar

    Hello when I open photoshop I get the screen you can see to the left. The right hand tool bar has disapeard, if you scroll across it comes into view, I want to be able to open photoshop as I could originally with the screen the size of the computer screen and the tool bar in place. What is also happening is that when I select the image i want, the image goes directly on to the screen and does not go to the tool bar above, again I would like to have the images going to the tool bar so I can select them and put them on a blank page. The same happens when I open up a blank page it does not store it in the tool bar but opens it up directly on to sreen. Hope you can help.

    Thanks also tried that it does hangs the screen back to how it was but the background is now my screen saver with the photoshop tool bars around. But the docking area is still not visible and when I open a file it opens it as sep screen and layer and not as part of docking station? Very strange
    Sent from my BEphone

  • Help with full screen

    I have created 5 separate swfs, when i publish them i check
    off html and full screen. when the menu screen opens it still has
    the menubar and address bar. when i click on my links to go to the
    specific section nothing changed. In the menubuilder do i need to
    link the secton html file that has fs.html as the final part of the
    link? If so, when i do this it opens a screen saying click here to
    open file in full screen. is there a way to by-pass this link so
    the course will open automatically in full screen view.
    Please right me back at
    [email protected]

    Full screen mode and dual monitors don't get along. The problem is the Mac has always treated the second display as an extension of the main display. This being the case, fullscreen would logically span both displays which might work if the two displays were the same size and resolution but that is often not the case. So the work around right now is for a program in fullscreen mode to pretend that the other display doesn't exist. We can hope that in 10.8 the OS will see each display as a different workspace and then you can have what you want.

  • Need help with automatic resizing of images

    I am working with a liquid template in dreamweaver and when I insert my banner image and preview the page, the image stays the same size while the page template expands with the screen resolution.
    How can I set the image so it automatically expands with the page?

    Expanding an image in this way isn't really the best way of doing things, because depending on the image it can get very distorted when it's increased or decreased in size.  You are better off selecting a background colour and blending the image into that, so that when the browser window is increased you see the majority of the image, but on larger monitors, the image is blending into the background on either side of that image.
    There is a technique that may make this possible - I did read something about it at one point, but didn't save the URL.  However, the above method is probably the most reliable way of doing what you want.

  • Need Help with Problem Batch Rotating Images in iPhoto 8!

    Hello, recently I have been having a lot of problems with pic files becoming unusable once I batch rotate them in iPhoto 8, so now I want to rotate the pictures 180º before I import them into iPhoto. Is there a free program out there that can help me do this without losing any picture quality. I REALLY don't want to have to individually open up over 2000 photos in Preview and individually rotate them that way.
    Does this same batch rotating problem occur in Aperture 1.5.6?
    TIA for ANY and ALL help!!!

    You can create an Automator workflow application to batch rotate a folder of photos 180 degrees. You need to download and install GraphicConverter first. You can use it in the demo mode by first opening it before you drop your folder of photos onto the application .
    When you install GC select the option to install the GC Automator workflows. Open Automator and put in the following elements: 1 - Get Finder Items; 2 - Rotate. You can select to use Quicktime or the internal algorithm. Save it as an application.
    This all must be done outside of iPhoto and then import into iPhoto.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.
    Message was edited by: Old Toad

  • I need help with blue screen on Windows 7

    Hi guys...I was wondering if someone could help me...!
    While I play a video game, I recieve a error blues screen message...I don't know if it is an error from my S.O, or it is an error for that video game...! 
    The message that I been given so far says :
    Problem signature:
      Problem
    Event Name:                        BlueScreen
      OS Version:                                         6.1.7600.2.0.0.256.1
      Locale ID:                                             10250
      Additional
    information about the problem:
      BCCode: 
                                                 50
      BCP1:                                                    FFFFF900C061C770
      BCP2:                                                    0000000000000000
      BCP3:                                                    FFFFF96000636D15
      BCP4:                                                    0000000000000000
      OS
    Version:                                          6_1_7600
      Service
    Pack:                                       0_0
     Product:                      
                            256_1
      Files
    that help describe the problem:
      C:\Windows\Minidump\022710-26223-01.dmp
      C:\Users\Caroline\AppData\Local\Temp\WER-125393-0.sysdata.xml

    Hi,
    In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
    If you don't know where .DMP files are located, here's how to get to them:
    1. Navigate to the %systemroot%\Minidump folder.
    2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
    3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
    4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
    between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
    much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
    choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
    If you are going to use Onedrive but don't know how to upload to it, please visit the following:
    Upload photos and files to Onedrive.
    After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
    Share files and folders and change permissions and view 'Get a link'.
    Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, you will need to allow the system to crash once again to generate a crash dump.
    If your computer is not generating .DMP files, please do the following:
    1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
    2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
    drives'.
    3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
    log'.
    Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
    4. Double check that the WERS is ENABLED:
    Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
    Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
    If you cannot get into normal mode to do any of this, please do this via Safe Mode.
    Regards,
    Patrick
    “Be kind whenever possible. It is always possible.” - Dalai Lama

  • New to Photoshop (CS4Ext) and need help with basic loading of images to new folder.

    Just purchased CS4Ext and installed it. It's not showing up on my desktop as a quick entry icon. I want to simply load images from a portable hard drive (USB) to a new folder in photoshop so I can review them and begin to select  and separate out some of interest to manipulate  and share or get ready to print. It 's the most basic help one can need butI'm jut not clear on the workflow steps . Would appreciate someone walking me through the steps .
    Thanks much

    drmjp2 wrote:
    Just purchased CS4Ext and installed it. It's not showing up on my desktop as a quick entry icon.
    Let's see…   First of all, this is the Photoshop Macintosh forum.  Installed applications never, ever show up on your desktop as a "quick entry" icon on a Mac.  Are you on a Windows PC maybe?
    drmjp2 wrote:
    I want to simply load images from a portable hard drive (USB) to a new folder in photoshop so I can review them and begin to select  and separate out some of interest to manipulate  and share or get ready to print.
    Just select them with your mouse in the Finder and drag-copy them into the new folder.  Done.

  • Deadline Need Help with HD VS DVD Best Quality 4.3 NTSC

    I just wanted to know if I made a DVD using HD MPEG2 and handed it out to people who do not have an HD TV will they be able to watch the screen normally or will the screen be too big, text off the screen?
    I Just tried to import a HD MPEG into DVD Studio Pro 4 and got an error message that said it was unsupported.
    It look so much better when I experimentd with a small vewrsion of my movie. They will use NTSC more than likely or a windows computer to show to clients.
    What settings are best for that?

    To the best of my knowledge there are no commercially available HD DVD players. Thus, although you can create a DVD with HD material you can't view it with any set-top DVD player or on a standard TV. You'd need a computer to view the HD MPEG2 material. The display would either have to be a computer monitor or a TV that could accept high-definition output (DVI) from the computer itself.
    In any case, you won't be able to create an HD DVD disc with standard DVD menus and navigation controls (at least not with DVDSP). Think of the DVD as a simple storage medium, not any form of a standard DVD video disc.

  • Need help with a scrolling background image

    I've got a 800x600 document that has a panoramic picture scrolling horizontally and buttons in the image.
    i've got this piece of code for AS2.0
    _global.plotis = Stage.width;
    centre._x = _global.plotis / 2;
    speed = 40;
    full._y = 0;
    this.onEnterFrame = function(){   
        if(_xmouse<300 || _xmouse>500){
        var A:Boolean = false;
        var X = _xmouse - _global.plotis / 2;
        full._x += -X / speed;
        if (full._x >= 0) {
            full._x = 0;
        if (full._x <= -(full._width - _global.plotis)) {
            full._x = -(full._width - _global.plotis);
    Otherwise it is working all good, but I'd like it to stay put at the start. Right now it immidiately starts scrolling to right unless I move the mouse on top to stop it. So ye, i need to have it sitting still and only scroll when the mouse is at the edges of the document...
    Cheers,
    PK

    use:
    _global.plotis = Stage.width;
    centre._x = _global.plotis / 2;
    speed = 40;
    full._y = 0;
    this.onMouseMove=function(){
    delete this.onMouseMove;
    this.onEnterFrame = function(){   
        if(_xmouse<300 || _xmouse>500){
        var A:Boolean = false;
        var X = _xmouse - _global.plotis / 2;
        full._x += -X / speed;
        if (full._x >= 0) {
            full._x = 0;
        if (full._x <= -(full._width - _global.plotis)) {
            full._x = -(full._width - _global.plotis);

Maybe you are looking for