Need help with graphics card options for an early 2008 mac pro

Hello,
   I have an early 2008 mac pro with 2 x 3.2 GHz quad core Intel Xeon and 6Gigs of ram, currently running with an Nvidia Geforce 8800 GT with 512mb.
    It is also running 10.7.2.
   I would like to either add a video card on top of the one I am currently running or replace it completely if necessary.
   I do video editing on the Mac, no gaming and only a small amount of photoshop, and as the resolutions get larger I would like to have my machine keep up.
   My questions are,
     1. What cards would you the community suggest?
     2. Can I add a whole other card to my system or do I have to replace the current one?
     3. If I can hold two cards what special accomidations would be needed in regards to final cut performance if any?
    Thank you for any help you would like to give.
  Rob

The two main cards for mac pros are the apple versions of the  ATI Radeon 5770 and 5870.
The 5770 requires one aux power adaptor and the 5870 requires two.  So generally you could only have one 5780 or two 5770's.
Video cards which don't require aux power should be able to coexist with these cards so log as it's all within the power supply maximums of course.

Similar Messages

  • I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations? Thanks.

    I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations?
    Thanks.

    BlackList:
    Final Cut Pro X, Motion 5, Compressor 4: Graphics card compatibility
    WhiteList:
    Final Cut Pro X, Motion 5, Compressor 4: Using OpenCL-enabled graphics cards
    OpenCL graphics cards available now, for any Mac Pro model, for a reasonable cost:
    Apple 5770 US$250 Avail: in stock
    Apple 5870 US$450 Avail: 2-3 weeks

  • What upgrade graphic card do i need for a early 2008 mac pro

    I have a early 2008 Mac Pro.  ATI Radeon HD 2600 XT 256 MB is what i have now.  What is a good upgrade graphic card to get.

    The GTX 780 6GB runs fine on the dual PCIe internal power cables -- as does the GTX 680 and Radeon HD 7950. The same can't be said of the GTX TITAN or GTX 780 Ti or Radeon R9 280X -- all of which require an auxiliary power feed to avoid a nasty power down of your tower at the worst moment when too much wattage is demanded of the Mac Pro's factory power supply.
    Did I mention that the GTX 780 with 6GB of GDDR5 matches the 6GB of GDDR5 in the TITAN?
    The one fallacy to my 'sweet spot' award has to do with OpenCL. In case you hadn't noticed, the AMD Radeon GPUs smoked the NVIDIA GeForce GPUs running Photoshop's OpenCL accelerated Iris Blur filter and rendering LuxMark's OpenCL accelerated Room scene.
    - http://www.barefeats.com
    So depends on budget, whether you want a PC card for less but no "early EFI boot screen" prior to drivers loading, and what apps and needs you have.
    The one thing for sure is that 2600XT should have been retired ages ago and even more so with 10.8.3 and above, it could be trouble or just... PITA/POS.

  • Compatible graphics cards for the early 2008 Mac Pro 3,1?

    I have an early 2008 Mac Pro 3,1 with the 2.66Ghz Quad core processor that is running Lion. I had an ATI Radeon Card in there that didn't last very long (I've read not great reviews about them recently) and now I need a replacement that will be compatible with my system and that will last me longer than my previous card did. The problem is I don't know what my options are. Can anyone reccomend me a viable replacement? I do video/audio production so something high end would be nice.
    Thanks,
    -RH

    There are some good ideas, comments and tests just how much difference and in what applications.
    The differences between 2.5GT and others are less than you might think.
    There is no-compromise performance for some areas of CS6 and CUDA with ML and GTX 570 or above. The new EVGA GTX 660-Ti FTW w/ 3GB $330 looks to be very popular and that is the "mid-range" today, compared to $400-500 where GTX 680 sits or ATI 79xx series.
    If you have to use 10.6.8 that is a bigger factor and some cards require 10.7.4 or later.
    The 5x70 were average cards when they came out. There is no reason to have a system where early boot is totally dependent upon firmware and couldn't do basic video. Anyway some people are willing to swap out the 5770 and keep it just for debugging.
    As to the original question: can't tell if you were interested in asking if a MacBook Pro Retina or something else... kind of hard to argue. A 12-core 3.33GHz with 48GB and 5 internal hard drives - it is hard not to do whateer you throw at it esp. if cost is not the primary concern but work is and it is suppose to pay for itself.

  • Where and what type of solid state drive should I buy for my early 2008 Mac Pro Desktop??

    where can I buy and what type of solid state drive should I use to upgrade my early 2008 Mac Pro Desktop??

    Rick,
    When you get a chance.... DSLReports is off line: their SQL server decided to take its indexes and access to data. Power. Not enough of the right kind of UPS. Same happened to StorageReview's "Drive Reliability Database" about 8-9 yrs ago.
    dslreports.com is offline
    Fri Apr 20 09:05:55 EDT 2012
    SSD: Loading CS5 plus other little monsters might matter.
    Lots of small I/Os
    latency of 1/100th where nanoseconds replace those "long" milliseconds
    System: Small and fast.
    DLLoyd even goes for short-stroking drives to get and maintain highest I/O
    The new 10k VRs hit 200MB/sec - I still use them and still find them useful, long lasting, feel responsive with whatever I ask of them. I know they get criticized and "cost too much"
    Just bought a new WD Black and yes it is better than the 2008 model I was using.
    600GB 10K $200 vs $150-220 for WD Black. your choice
    I can destroy a 7.2k drive, I have brought ever 10K drive back after a simple WD Extended Test in Lifeguard.
    I don't really care about $$/GB or I wouldn't have just bought Intel 128GB $149
    Database: the pros put the index in memory and page fix (virtual volumes in memory; cache; hold disk drive index in memory). Caching storage has been around for almost 40 yrs.
    Today you can use SSDs as front end cache to hold DB indexes and frequent data for web servers and such adn use slower secondary storage.
    SSD + SAS + 4TB storage
    Separating the system from data: #1 must
    Having data on array: been what I use
    I put a large photo library on 2 x 10K VRs vs SSD and couldn't tell much difference (SSD is soundless of course) But my WD Blacks make as much noise and run 15*C hotter than those 10K (not what you expect?)
    While 10K and 7.2K are in the 140-180MB/sec range, they are in 3.0 to 12.0 ms seeks, not  0.01 ms.
    People wonnder why shrink a drive to 2.5" (or why not go down to 1.8".
    How long does it take to reposition a disk head? how often? the 10K VR travels on outer tracks at 70 MPH. Really trying to fly off into space.
    It uses one step to find the "zip code" and then another DSP to find the "house."
    True of any high density perpendicular recording mechanism.
    And of course while the Raptor-X tried to find a home with famers, Cheetah buyers, the WD 10K line has more of a home where servers and small form factor drives - and 100s of them - can fit in a rackmount server I imagine.
    Anyway.... if SR and DSLReports can drop out of site due to power and hardware failure and loss... we can learn some and hope to protect our own data and investments.

  • What is the best Video Card I can get for an Early 2008 Mac Pro?

    What is the best Video Card I can get for an Early 2009 Mac Pro3,1?

    A 3,1 is "Early 2008" with DDR2 FBDIMMs, Intel 54xx Harpertown, and not 2009 Nehalem with DDR3.
    http://www.barefeats.com bench tests. A 3,1 does not improve as much due to its old PCIe 2.0 implementation for one thing.
    "Best" is hugely subjective. For what? cost versus performance and whether you need CUDA support or AMD - dual AMD's for FCP-X for instance.
    I think GTX 970 right now is close to "best".
    And of course shop here:
    http://www.macvidcards.com

  • Need help with graphics card Hp Pavillion a6530.sc will a 9800GTX or 9800GT work?

    Will there be enough room for a new grapihcs card to replace the old one since it's fan has broken and I could use a new Graphics card. I know that the 9500GS is quite small but will there be enough place for a 9800GT/9800GTX if there isn't could you give me the name of a graphics card manufactured by Nvidia that is as powerful as a 9800GT/GTX, and fits in to the pc. Any help will be appreciated!

    Well, you are starting out from a fairly low baseline with the integrated graphics. It will not cost much to have a substantial increase if all you want to do is run WoW without error messages. Yes, the 300w power supply is an issue and rules out any card that will require its own power (i.e. needs its own power cord like a hard drive) but there are several mid-grade cards that can run off bus power alone (i.e. just from the pci-e slot itself). Just taking a quick look at newegg.com I see the following:
    GeForce 9400 under $50
    Radeon HD 4650 under $50
    GeForce 9500GT a little over $50
    Any of these should get you where you want to be and not require a PS upgrade. The slot you have available is a PCI Express x16 slot so don't look at AGP cards; they will not work. If you want to install the card you mention you need to get a better PSU.

  • Need help with EVENT BOOKING: option for multiple, payment (pay pal standard or pro only) add cost, etc

    Hello!
    I'm at my wits end: please help! It seems straight forward, and I sold my client on BC thinking this was doable in the events module, but it seems maybe not so without a ton of custom coding.
    1. Book an event online,
    with option for multiple (say 1-5 people at a fixed cost per person),
    and checkout using only Pay Pal (standard or pro, doesn't matter, but I think Standard won't work without shopping cart).
    2. The events are every day but Sunday all year long (just admission to an attraction), so is there a way to upload months in advance so they don't have to be manually entered?
    I'm so grateful for any assistance.

    This is all very achievable:
    • Events you can add multiple people to book.
    • PayPal you use use our APP that's in the BC Appstore (Liam to confirm is works with bookings)
    I'm sales and marketing at Pretty, so I'm not the person to advise on how all this fits together. But I'm sure Liam can point you in the right direction.
    If you need some consulting or us to do it for you just let me know [email protected]
    Brett
    www.prettydigital.com.au

  • Need Help with graphics card

    Today I was told to buy the graphics card GeForce 9800GT for my compaq SR5000. Whin in turn I needed a bigger power supply.  Long story short I am having a problem when I install the video card my computer makes this really loud squeal. Nothing I do is right but I know that it is installed the right way.  Do I have the wrong graphics card. Please anyone can you help me.

    Unfortuately, Compaq does not post the Power Supply rating on their website for your unit, but when you open the case, their should be a sticker on the power supply which lists the maximum Wattage for the unit.  An Nvidia 9800 GT requires at least a 400 Watt Power Supply, so if it is anything less than that, you will have problems.
    Other suggestions;
    The card should be inserted in the PCI Express slot.  Be sure it is fully seated in the slot.  If necessary, start the computer and enter the system BIOS settings.  You may need to disable the onboard video chipset before the system will "see" your new video card.
    As for the noise, make sure you haven't nudged any cables so that they are hitting system case or processor cooling fans.
    Good luck!

  • Need help with graphics card upgrade

    I have a stock p6140f and am looking to run on the new WoW expansion. I have gotten by to this point with the intel GMA 3100 /G33 that comes with this desktop. I have recently run into issues with crashes during game. I have always had it on the high resolustion and never encountered any problems. I am looking for a graphics card that will run the game WITHOUT replacing my power supply. I know that it has a 300W PSU and that is has a 
    Expansion Slots:
    1 PCI x16 slot for graphics card
    What I dont know is what will work for this upgrade.The specs. list it as a PCI slot, not a PCI Express 2.0 slot. If this card doesnt work then I was looking for any card that would be compatible with the system that could run the game
    I was looking at the 
    GIGABYTE GV-N240D5-512I GeForce GT 240 512MB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Ready Video Card
    Here are the compatiable cards
    ATI OS Driver Version Radeon 9500+ Series
    Radeon X000 Series
    Radeon X1000 Series XP/Vista/7 Catalyst 10.2 Radeon HD 2000 Series
    Radeon HD 3000 Series
    Radeon HD 4000 Series
    Radeon HD 5000 Series
    Radeon HD 6000 Series XP/Vista/7 Catalyst 10.9 Integrated Video     Radeon Xpress 200
    Radeon X1200 XP/Vista/7 Catalyst 10.2 Radeon 2100
    Radeon 3200
    Radeon 3300
    Radeon 4200 XP/Vista/7 Catalyst 10.9
    Nvidia OS Driver Version GeForce FX 5000 series XP
    Vista
    7 175.19
    96.85
    Not supported by manufacturer GeForce 6000 Series
    GeForce 7000 Series
    GeForce 8000 Series
    GeForce 9000 Series
    GeForce 100 Series
    GeForce 200 Series
    GeForce 300 Series
    GeForce 400 Series XP/Vista/7 260.89 Integrated Video     GeForce 6150
    GeForce 7050
    GeForce 7150
    GeForce 8100/8200
    GeForce 9100
    NVIDIA Ion (9400) XP/Vista/7 260.89
    Intel OS Driver Version Intel GMA X4500 Series
    Intel HD Series Vista/7
    XP 15.17.9.2182
    14.42.5.5284

    Unplug your PC and open it up. Read the label on the power supply (PSU).  What is the total wattage and the amperage on the 12+ volt bus?  The amount of 12+ volt amperage is important when selecting a video card.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • What is the best video card for an Early 2008 Mac Pro

    I have an early mac pro with a solid state drive. I use Adobe CC 2014. The old video card is not working. I loaded Yosemite and have bad problems using Prem Pro CC.
    Any suggestions on the most suitable video card?

    We love it when people want us to guess what video card and other items you have .... price is no object of course right.... and you want CUDA? so that means a GTX this time instead of what you have (5770 upgrade? no, the original 2600XT that really should have been ditched long ago).
    Yosemite also makes more demands on the GPU.
    The GTX 680 Mac Edition EVGA would be the first, though people are using even newer graphic cards in the Nvidia line.
    New Nvidia GTX 970 and 980 - cMP?  (  1 2 3 4 5 6)

  • I need help with the best option for backup of itunes for laptop change?

    i want to change my itunes account from my existing laptop to my new laptop, whats the best way to back up or transfer my itunes?

    Try this link
    http://support.apple.com/kb/HT4527

  • I have an early 2008 Mac Pro, 8 gb ram with a Dell 27" display and a 42" LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs. Does anyone have any suggestions on the best card?

    I have an early 2008 Mac Pro, 8 gb ram with a Dell 27” display and a 42” LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs or 1 dvi and 1 vga vs 1 dvi and a mini. I don't do a lot of Final Cut Pro, gaming, etc. I am interested in best value for the graphics card.
    Does anyone have any suggestions on the best graphics card for these larger displays for the best value?
    Thanks,
    Kevin

    I recommend you install nothing older than the Apple-firware 5770, about US$250.
    RE: Mac Pro Replacement Graphics cards
    1) Apple brand cards,
    2) "sold in the Apple store" cards, and
    3) "Mac Edition" cards ...
    ... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
    1) Apple brand cards:
    • Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
    • Apple-firmware 5870, about US$450
    2) "sold in the Apple store" cards
    • NVIDIA Quadro 4000, about US$1200
    • NVIDIA Quadro 5000, about US$2500
    3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
    • SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
    • EVGA GTX 680 Mac Edition, about US$600
    The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
    If you are Meet ALL of these:
    • running 10.8.3 or later AND
    • don't care about "no boot screens" etc AND
    • can re-wire or otherwise "work out" the power cabling, THEN:
    You can use many more cards, even most "PC-only cards"

  • Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers,  threw programs away,  only have Adobe Acrobat X Standard,  need a code to unlock program?

    Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7. 

    You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

  • I think I need help with driver (software) settings for D110a

    I think I need help with driver (software) settings for D110a all-in-one
    Product: D110a all-in-one
    OS: Windows XP Professional
    Error messages: None
    Changes before problem appeared: None--new installation
    The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
    IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
    When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
    least acceptable, Some would probably say good or very good.
    It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
    out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
    Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
    printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
    trunk is a round, solid object.
    I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
    I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
    how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
    I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
    e-mail me at [email protected]

    brazzmonkey wrote:
    Hi everyone,
    I noticed the following message when network starts on my gateway
    Warning: This functionality is deprecated.
    Please refer to /etc/rc.conf on how to define a single wired
    connection, or use a utility such as netcfg.
    Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
    Currently, my set up is the following (old way):
    INTERFACES=(eth0 eth1)
    eth0="dhcp"
    eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
    ROUTES=(!gateway)
    eth0 is on DHCP because the IP is dynamically assigned my ISP.
    eth1 has a fix IP because it's on the LAN side.
    No problem to use DHCP on eth0 with the new settings.
    But for eth1, I don't know what I am supposed to write for gateway.
    Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
    Any guidance appreciated, thanks.
    brazzmonkey,
    you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
    Use, f.e., netcfg:
    Comment your old lines.
    In /etc/rc.conf insert:
    NETWORKS=(Eth0-dhcp Eth1-static)
    DAEMONS=(..... !network @net-profiles ....)
    In /etc/network.d create 2 files:
    First one is named  Eth0-dhcp.
    Contents:
    CONNECTION="ethernet"
    DESCRIPTION="Whatever text"
    INTERFACE=eth0
    HOSTNAME="your hostname"
    IP="dhcp"
    DHCP_TIMEOUT=15
    Second one is named Eth1-static.
    Contents:
    CONNECTION='ethernet'
    DESCRIPTION='whatver'
    INTERFACE='eth1'
    HOSTNAME='hname'
    IP='static'
    ADDR='192.168.0.10'
    GATEWAY='192.168.0.1' # your gateway IP
    DNS=('192.168.0.1') # your DNS server
    The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
    Hope it helps.
    mektub
    PS: netcfg must be installed.
    Last edited by Mektub (2011-07-20 14:07:05)

Maybe you are looking for