Need help with Group Headings and showing them on drill down.

Hi all:
I think this is a simple question and feel that I should already know the answer but for some reason it eludes me. What I would like to know is the proper way to hide/display group headings and have them show up on drill down BUT not repeat on each group header.
What I have for grouping is as follows:
Group Header #1 u2013 Sales Rep
Group Header #2 u2013 Customer
    Group Header #3 u2013 Product Class
      Group Header #4 u2013 Stock Code
        Details
      Group Footer #4 u2013 summary calculated on this line
    Group Footer #3 u2013 summary calculated on this line
Group Footer #2 u2013 summary calculated on this line
Group Footer #1 u2013 summary calculated on this line
My goal is to have my report show only the lines listed below by default and allow the user to drill down group by group to the details section:
Group Header #1 u2013 Sales Rep
Group Footer #2 u2013 summary calculated on this line
Group Footer #1 u2013 summary calculated on this line
If anyone could offer any help it would be greatly appreciated!
Thanks,
FatMan

click section expert, then for example of GH3, highlight it, then click on the formula box for suppression, and put in the code....
Drilldowngrouplevel < 3
The result will be that this GH3 is suppressed whenever the report is showing GH1 and 2 but not 3.
In addition to this, you must Hide(Drill-down ok) GH3. This is also done in the section expert.
Then just do the same for GF3, and for GH4/GF4 make sure you use...
Drilldowngrouplevel < 4

Similar Messages

Need Help with Sticky Hide and Show 0.9

I am trying to implement Sticky Hide and Show v0.9 into my applications. I have created a custom region named "Hide and Show Sticky" for Theme 8 as shown in the example application. However when I use the templet my region does not have a hid/show button. I have very little experience with Templates so any help would be great!

Sorry for the bump. I am REALLY stuck! I viewed the source with the region using the Seeded (Non-Sticky) template and using the new Sticky template. I see some dramatic differences but nob that make sense to me. I tried to past the lines in the forum but they are blocked.
Any help would be great!

Need help with Blog, Wiki and Gallery

Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh Singh

Hello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/

Need help with Page Layout and Background Scaling

hello, everyone.
I am in the process of designing a new website for myself,
and while I was researching nicely designed pages to use as
inspiration, I stumbled upon this site:
http://www.jeffsarmiento.com/
obviously, the design is very impressive, but it also
incorporates a lot of web mechanics that I have been trying to
figure out, so I will use this page as an example.
one thing I need help with is backgrounds. as you can see in
the posted website, the creator used a seamlessly tiled paper
texture to display the bulk of his content on. also make not of the
pattern that is located to the left of the paper texture. how do I
create seamless backgrounds like this that will scale to fit any
amount of content or any resolution? I can't imagine that the guy
that made that site created a new size background every time he
made an update, so there has to be an easier way.
the second thing that I am having trouble with is general
site layout. I have read that most sites used series of invisible
tables to organize there content, but when I open the source of
this page in dreamweaver, he was using something different. div
tags? should I be using these? who do I use them? are there any
general layout tips that someone could pass on to me? perhaps a
link to a good tutorial?
please help me. i am very confused.
thanks so much.

IMO not a good site to emulate. To wit:
Top background image:
http://www.jeffsarmiento.com/images/bg-top.jpg;
745px
x 350px 137K
Main background image:
http://www.jeffsarmiento.com/images/bg-tile.jpg;
745px x 950px 130K
Total page size: 454K (Check here:
www.websiteoptimization.com)
Website usability experts routinely recommend a maximum page
size of ~80K
Check out the We We Scale @ www.FutureNowInc.com/wewe/ where
they suggest,
"You speak about yourself approximately 0,003 times as often
as you speak
about your customers. Might that have an impact on your
effectiveness?"
That is 100% consistent with the #1 Web Design mistake:
"Believing people
care about you and your web site." or to phrase more
expansively, "Our site
tries to tell you how wonderful we are as a company, but not
how we're going
to solve your problems."
www.sitepoint.com has some excellent books on making a
website actually
attractive and usable at the same time.
Walt
"beWILLdered_" <[email protected]> wrote in
message
news:[email protected]...
> hello, everyone.
> I am in the process of designing a new website for
myself, and while I was
> researching nicely designed pages to use as inspiration,
I stumbled upon
> this
> site:
>
http://www.jeffsarmiento.com/
> obviously, the design is very impressive, but it also
incorporates a lot
> of
> web mechanics that I have been trying to figure out, so
I will use this
> page as
> an example.
> one thing I need help with is backgrounds. as you can
see in the posted
> website, the creator used a seamlessly tiled paper
texture to display the
> bulk
> of his content on. also make not of the pattern that is
located to the
> left of
> the paper texture. how do I create seamless backgrounds
like this that
> will
> scale to fit any amount of content or any resolution? I
can't imagine that
> the
> guy that made that site created a new size background
every time he made
> an
> update, so there has to be an easier way.
> the second thing that I am having trouble with is
general site layout. I
> have
> read that most sites used series of invisible tables to
organize there
> content,
> but when I open the source of this page in dreamweaver,
he was using
> something
> different. div tags? should I be using these? who do I
use them? are there
> any
> general layout tips that someone could pass on to me?
perhaps a link to a
> good
> tutorial?
> please help me. i am very confused.
>
> thanks so much.
>

Need help with Airport Express and so on.

Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

Need help with saving data and keeping table history for one BP

Hi all
I need help with this one ,
Scenario:
When adding a new vendor on the system the vendor is suppose to have a tax clearance certificate and it has an expiry date, so after the certificate has expired a new one is submitted by the vendor.
So i need to know how to have SBO fullfil this requirement ?
Hope it's clear .
Thanks
Bongani

Hi
I don't have a problem with the query that I know I've got to write , the problem is saving the tax clearance certificate and along side it , its the expiry date.
I'm using South African localization.
Thanks

Alright I give! I need some help with groups/busses and more please..

Hi all,
Well, its now been a few weeks of my off and on testing with my new Logic Rig, I have every plug I can transfer over to UB that I can and now am trying to get deeper into things.
First I struggled with learning the environment (I still dont get it fully) but now I am really confused about group and fx tracks.
- Am I missing something or is everything just a buss turned into a group? This also included creating an FX track?
If this is the case then its not nearly as complex as I think it is but I cant figure certain things out with the way logic handles naming in regards to its busses.
Lets say I want to create a sidechain group. I take an audio track change it to represent buss (1), I then rename buss 1 to SC-GROUP, now any window that I drop down to find the newly names SC-GROUP always remains named as buss (1). This even happens when I rename the buss direct from the audio environment.
I must be missing something, whats been confusing the heck out of me is that no matter how I try and name things they always remain their original names in any menues as the example of the buss (1), so how do I rename these channels so I can clearly know exactly where I am routing audio?
So lets summarise where I am lost so far hehe.
1. Are groups really just empty busses renamed to act as a group?
2. How can I rename a buss/group and be able to see the renamed channel in the menues.
and for the 3rd new question of sorts...
3. FX Sends, again is this just a buss that has an AU inserted into its channel and then rout the insert of an additional audio channel to the buss with the FX inserted?
and now my last uestion of the day if I have not confused you to death so far
Why is it that when I add a AU lets say battery as instrument 1, when I add another in the window and I rerout an instrum,ent track the next AU shows up at the bottom of the list instead of inst. 2?
If I am not explaining myself clearly enough for any of my examples let me know so I can try to better represent my questions. I am still so new to Logic and still have yet to get the bulk of the simple operations down just yet..
Thanks again for all your asistance!

Thank you guys,
So if I understand right, a sub buss is nothing more than a routing the output of a few channels to a buss to control a few aspects like I had mentioned compressing an entire group of tracks EG: a drum buss (in this situation a drum sub buss?).
So I will have to reffer to the manual again to read the details on an actual group since it does seem there is a difference EG: the group can actually manipulate the faders of channels routed to the group?
FX busses seem to be just that, slap an FX info either and AUX channel or a buss and then set the insert of that AUX or buss desired.
The reason I asked about naming is that lets say I have 6 effects tracks I wish to use lets say as an example AUX1=Short Delay, AUX2=Long Filter Delay, AUX3=Slap Verb, AUX4=Long Verb and so forth.
When I go to actually use these inserts I need to assume I know exactly what AUX I assigned each effect to, if I could simply rename this AUX track to refference the effect it would make so much more sense then trying to remember what AUX5 was.
In regards to my last question here is a bit more of a detailed explanation, please bare with me as I am not in front of my computer.
1. I add battery into Audio Instrument-1
2. I then configure my environemt to use my AUXs I already have inplace for audio routing.
3. I then edit the Audio window create the midi for a new multi-instrument.
4. I come back to the main arrange window and hold-click on the next available audio-instrument and in the instrument window battery will be instrument 1 out of how ever many blanks apear EG:25+
5. Now I go to add lets say Stylus RMX into the next available mutli audio instrument. I then repeat steps 2,3,4.
Now when I get to step 4 this time instead of audio instrument 2 from the lint being Stylus it shows up as the last possible instrument in the drop list that appears under audio instrument from hold-click on the audio-instrument track.
Its just odd, it should be instrument 2, but instead it shows up as the last possible choice.
Maybe I am doing something wrong, even sometimes when I grab on of batteries midi tracks and create next object I will get a random audio track in there out of no where, or maybe its just a bug with battery.
Any ideas? If I still am not describing this right, I will post a step by step this eve of exactly the steps I am taking.
Thanks again, this forum has been very helpful in getting me going with the questions I just cant seem to get around from my Nuendo work flow.
Cheers!

Need help with IE 8 and 9 not showing alignment right

Ok I am working on a sit for a friend. I have a Spry vertical menu that looks fine in FF when I view it in IE 8 or IE 9 it is to the left of the bos I need it centered. Also in IE 8 the FAQ link jumps up beside the Slides link box. And when I added a E-Male link under the menu it jumps up into the menu.
                FF                                                                     IE-9                                                          IE-8
I have been looking for a while now for a post that will help me fix this and I will keep looking till some one answers this post here is a link to the test page I have up.
http://www.dnawebcreations.com/jump_index.html
Thanks for any help.

Using the original (un-modified) SpryMenuBarVertical.css as our foundation, I added the following style rules
<style>
ul.MenuBarVertical {
     width: 145px;
     border: none;
ul.MenuBarVertical li {
     text-align: center;
     width: 145px;
ul.MenuBarVertical a {
     background-color: #EB071C;
@media screen, projection {
     ul.MenuBarVertical li.MenuBarItemIE      {
          background: #EB071C;
</style>
In passing, have a look here http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.dnawebcreations.com%2Fjump_in dex.html. This shows the improper use of the ol element.
Gramps

FCP Novice needs help with video quality and FCP 5!!

Hi,
I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
The final footaage looks like an old VHS recording that's a year or two old!
Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
Is there some presets I should be working to?
I'm tearing my hair out! Help!

Hi Guys,
thanx for your replies.
here's the latest:
Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
Does this make sense to you guys or am I still doing something very wrong?
Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
any more help guys would be greatfully appreciated.

Need help with WinXP 64 and raid please...

First off let me just say that for the past week or two I've been lurking on this forum while building my first 64 bit pc and I just want to say that all of your advice, suggestions, tips, and workarounds have proven to be invaluable. A sincere, heartfelt thanks to everyone here. Like many of yours, my build has also been problematic. In fact, I guess I'd have to call it a pain in the ass. I can't imagine having done it without your help by using trial & error, so once again; thanks! Now, on to my ? My plan was to have one PATA 40gb HD to house 2 OS's on 2 partitions; a dual boot with XP and XP64, AND one RAID 0 made up of 2 160gb SATA HD's for everything else (actually the plan was to put the OS's on a Raptor but $$$). Now here's the prob: XP's up and running fine but when I try installing XP64 and it asks for the RAID drivers, it won't take them. It says they're not for a 64 bit OS. ? Am I the only one that thinks that odd? Isn't that the ultimate point of all this? So am I missing something? I d/l'd the 64 bit drivers from NVidia, is there a way to extract RAID drivers from them to a floppy? Also, I'd like both OS's to utilize the same RAID array for programs, storage etc. Is that a problem (my first time installing RAID )? And if it WILL work, is it going to insist on wiping the drives and starting fresh? I hope not since since I've already got a ton of stuff on there. Anyway, thanks in advance for any and all help you might offer. Keep up the good work. -Glyph

Thanks for your quick responses. So are you saying that if my OS isn't on the RAID array then I don't need the RAID drivers during setup? That's interesting. It's not how I understood it to be (not to say your wrong though). I'm pretty sure I needed them in WinXP, though it's on a different disc as well. Now that I think about it, maybe I could've waited and installed them through device manager with the same end result? I guess I'll try it and find out. And are there any ideas regarding the 2nd part of my question re data loss? I'd really hate to start from scratch at this point.

Need help with Apps misbehaving and upgrading the MacOS: The all-in-one post. ;)

Hi there,
So, I've been browsing the SL and Mavericks forums for the last days but although I have fetched some useful tips and answers, still need some help. Let me put it diary-style so I can be more concise ;)
Here's my current system profile:
iMac 27" (aluminium back- if I'm no wrong, from around late 2009-mid 2010)
MacOS 10.6.1 Never updated.
3.06 Ghz Intel Core2 Duo
4Gb RAM
LaCie Big Disk via FireWire 800
Internet access via Ethernet port (cable)
And here's The Issues Log:
– Day one: First ever Kernel Panic. Restart. Nothing (apparently) wrong.
– 3 weeks elapsed: Second Kernel Panic. Same. iMac restarts fine. Apps fine. No missing files. No misbehaviour experiences.
– After a month or so: One morning, Skype decides on its own to stop launching. The night before, I chatted with one of my clients, fine as always, but at the next day, nothing. Computer is usually shut off for the night. And so it was that night. Updated Skype and also did all the guest account trick / repaired permissions / repair ACLs. Nothing worked. Overwrote the Skype app with a former functioning version I have in an MacOS 10.5 system. Didn't work. Now I have to chat on the MacOS 10.5 computer. No good.
– 15 days ago or so: After realising that I no longer have my HP1515n printer (it ran out of inks and thrashed it. It costs more to refill than to buy a new one), I deleted the printer from the printers list in the System Prefs Pane.
– Last week: Acrobat (CS4) won't launch a PDF file and freezes. Spinning beach ball. Force quit and try opening the PDF file again. Freezes again. And again. And again. With that file and every other PDF.
Photoshop CS5 fails to open or crashes when attempting to open any jpg or tiff file. InDesign and Illustrator CS5 are frozen and had to force quit both. MacOS 10.5
Restart the iMac thinking it is just a "common" bad day and hoping everything will be alright after the restart, but nope.
Not only the CS5 stops working; MSOffice stops working too. Spinning beach ball. Begin to suspect of the deletion of the printer, however, I also deleted the same printer in the above mentioned 10.5 system and I'm not experiencing anything strange. Reinstalled the HP drivers but nothing remarkable happens.
Then, try to uninstall CS5, CS4, Office, etc. Try to reinstall Acrobat CS4 and the CS5 apps. Reinstall Office. Nothing. Just Outlook works.
Since I had to desperately meet deadlines, convinced a colleague to come over to the studio and -I know, I know- allowed me to install a copy of CS6. It seems to work fine, except for Acrobat, which randomly freezes/hangs/works and Photoshop, which works fine unless you want to open a layered file containing text layers or if you want to type text on a normal file, because it freezes as soon as the Text Tool is pressed in the toolbar, of course, spinning beach ball again.
Well, Illustrator CS6 sometimes shows a strange black thin frame overlaid on the interface but goes away by switching to another workspace and then back to the current. InDesign CS6 seems to be fine and making PDFs as expected. However, as I said before, it is pure luck if Acrobat accepts to open the file or even if it launches. Spinning beach ball when freezing/hanging.
As a method for eliminating possible culprits, did a clean up of the Suitcase Fusion database, removed duplicate and a few (less than 10) corrupted fonts.
Removed completely MSOffice reinstalled and updated. Nothing. Now I neither have MSoffice running.
I am no rookie but I can't even imagine what can cause such amount of misbehaviour, (kernel panics have something to do? malware? lack of system updates? MacHD is damaged?) so I'm thinking of a few scenarios:
Backing up my projects and user folder –anything else to backup? (In fact I've already done that)– and:
1. Do a clean install. Not sure if it will be best to completely erase the whole drive or if a standard reinstallation will be enough.
2. Take the machine to a Genius Bar to see if there's anything that can be done without major OS messes.
3. Erase the drive and go through the Mavericks upgrading (SL to Ln to MLn to Mavcks), although not sure if this upgrade is worth yet.
4. Replace HD for a brand new one and either step 1 or 3.
5. As a complement, I'm thinking of adding more RAM.
Well. It is really the first time I don't know what to do. I have work to do and would not want to face a week away from my main computer and since most of the files are CS5-6 and hence, can't move to my wife's iMac...
Apologies if this post feels too long, but I will truly appreciate any kind of input and advice on one of more of the issues mentioned in this post.
And if it fits best in any other forum, please also let me know.
Cheers and thanks in advantage.

You have to use the Base Station Menu on the Menu Bar at the very top of your screen.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

2 minor issues need help with one BBM and one email

I am hoping someone can help with this
the BBM issue is one of my contacts that has the z10 doesn't show option for my to video chat with him all my other contacts do and he has it displayed on his side and all his options are set same as mine
second question is since i set up my activesync email it has pushed a password on my phone everytime it goes to sleep and i go to options and cannot turn off the device password option.
Hope someone has some ideas

It sounds like the account you connected to for ActiveSync has an IT policy that requires the password. You can't get around it. You'd have to talk to them.
For BBM, have you verified the PIN is correct on each end? Can you BBM directly with this person? You both have to be on wifi, as well.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Need help with flash animation and jump to slide

I have been researching for days on how to build a menu in
flash 8 that has links to jump to a slide later in the captivate
lesson.
The goal:
I want to have a tab - when clicked on - opens up and shows a
table of contents. Click on an item and it will jump to that slide.
Method:
I used flash 8 to build a tab and pop up menu. Works great.
But how do I make the buttons or links to jump to slide?
Is it possible to:
* - use a roll over image in captivate - pause image and
click on a button to pop over to the slide - no flash menus...just
action script to pause and allow clicking.
* - use a FS Command script from inside the captivate movie
- java call in button proprieties.
* - write the menu in flash - use action script to say "on
release - jump to slide" or "on release - jump to frame" - I have a
frame counter that I can find the frame number of the slide - but
how would you get the script to work.
Please Help -
Flash not a good friend of mine - so any time I can avoid --
is great...but it is what it is - i do anything to get it to work.
Thank you in advance for your help and I really look forward
to your thoughts.
Regards -
Vince

Hi
I didn't understand a few things here.
1. Are you trying these things using Adobe Presenter or this is just plain Powerpoint you are talking about?
2. Are you trying to view the output on the Slide show or presenter output
If you are doing it for PowerPoint slide show, try setting the animations using with previous and after previous
1. first insert the video. Set it to play automatically
2. Insert the first text box. Apply animation on it saying "with Previous". This will make the animation play as soon as the video starts. If you want some delay apply some delay for the animation in the animation pane, such that the animation appears when the video has content sound
3. For the remaining text boxes apply animations as "after Previous". This will make the animations play after the previous animation has completed.
4. Now all you have to do is applay delay to the animations to adjust them as and how you want
Hope this is what you wanted to achieve
Thanks
Mahesh

Need Help with Packet Loss and routing Loop perhaps???

Hi,
I am running into a very odd situation. One of our highly critical systems (172.18.1.2/16) is losing connection intermittently for brief periods of time (1minute, 3 minute, 50 seconds and so on).
I have gathered some information that I would like to share with you guys:
The switch is a 3560 (Show version is in ShowVersion.txt)
default gateway is 172.18.10.254/16 (virtual IP in an HSRP , packet capture is done on the active node)
I have noticed that pings to one of the default gateways drop infrequently (more frequently from machines on 172.18.0.0/16) segment.
total number of machines on 172.18.0.0/16 do not exceed 200
I have captured packets on Interface Vlan1 and I found something very weird, perhaps pointing to a routing loop??? (see capture.png) The ICMP request comes and hits the 172.18.10.254 with TTL of 128 TWICE! then packet capture shows that same packet with TTL decremented by one TWICE! again and again until it reaches TTL of 1 and then it responds with a reply.
At times it completely ignores the requests and causes a request timed out.
I am confused and need help in right direction. I really appreciate it.
can you also confirm if the multiple packets mean routing loop somewhere?
Thanks

Could you post a copy of your HRSP config and the results of a #show standby?
Thanks

Need help with n95-3 and PTT

Hello, I bought an unlocked N95-3 and I have AT&T USA. Does anyone know if your able to use the PTT program with AT&T and if so how? I assume you have to take your phone in or something to get it installed if its even possible. Any help would be greatly appreciated and i apologize if this is a repost but I couldnt find anything for the -3

you'll need to preload the images if you want them to appear
close-to-immediately after your button press.
to load them with the button press:

Need help with Group Headings and showing them on drill down.

Similar Messages

Maybe you are looking for