Need Help with Group Message Glitch

I am in a group message with about 15 people. Every text comes in as if only one person was sending me a text. Although I can see every person's text, I can not respond. Also, when I press "details" only one person's information and name shows up. Please Help.

Similar Messages

Need help with error message 213:8

Need help with error message 213:8, this error message prompted after re-installing CS5.5 on the same machine (W7 Pro)
Thanks.

Hi TKA_,
Please try the solutions mentioned on following forum thread.
http://support.muse.adobe.com/thread/1305941?start=0&tstart=0
Let me know if it works?
Regards,
Sumit Singh

Need Help with new site glitches PLEASE!!!

I need help trouble shooting a website. The site is
www.farrowandwatkins.com. Nav buttons on Mac they display correctly
which is aligned at top and bottom of content to left on Home page.
However, when viewed on PC, the buttons spread to fill the
distance of the "Patients" Page. All the pages spread to this
length also, but are not suppose to.
Nav buttons have padding of 10 on bottom, except last one.
Please help if you can

First guess would be that there doesn't seem to be a fixed
height or width on the cell for the 'patients' button.

Need help with SMS message telling me I have a voice mail, need to get rid of that

I have done a few searches on the internet and have found nothing that fixes my problem.
I use two message boxes/folders, one is for phone calls and the other is for SMS/MMS messages. I need to keep these this way (I am not searching though 100 text messages to find a phone number that is critical).
The problem occurred after I downloaded a new update (Jan 11th, 2010; think is like version 4.6 or something). Before, if I got a call it showed up in my call message box/folder and if they left a voice mail I have a special ring tone for voice mail messages. I also had it when I got a SMS/MMS message it went to its own "mailbox/folder" and had its own ring tone when a new one was sent. Now when I get a voice mail message due to the fact I also get a SMS/MMS message I only hear a text message ring tone (not good).
I need to know the instant I get a voice mail, the text messages are a nice thing to have for my significant other and friends. If I walk out of a location that I did not have reception and I get a voice mail, I now think its a text message and get to it when I can even though I needed it then.
Example: just think of leaving a building with your hands full heading to point B, when the voice mail told you a correction and divert to point C;
voice mail = hold everything and get the message all good
text message = head to point B, see a problem and pray you get to point C before anything bad happens).
I went to my local Sprint/Nextel store and they told me there was nothing I could do.
If this can't be fixed I will be forced to get another cell, then everyone including me will sufer because we will have to pay for it (just think taxes).
I feel exahusted in looking for a solution, if there is not one then blackberry needs to do an update.
Provided its a software problem that needs an update or maybe I am not to bright to find where to turn this off.
My questions about this would be:
1. How does the phone get a text message, does it generate it from my phone number or the phone number where my voice mail is sent
2. Once I know which number it is being sent from, can I put a text block on it
3. Last but not least, will it solve the problem?
Thanks
Incase it does not show up I have a Blackberry Curve 8350i from Nextel OS V4.6.313

This is a peer-to-peer community.
All people responding are user just like you.
However, many of are users have solved many problems for other blackberry users in need of assistance.
If you see you haven't been responded to in a long time, just reply 'bump' on the same thread you originally posted.
The term 'bump' is used because a thread remaining unanswered usually moes down the list and gets lost in older pages. By replying to a post, it gets moved ("bumped") back to the top of the first page of that category.
If you see a solution to your problem, feel free to mark it as a solution. Also you can thank the user who helped you or give him a 'kudo'. A 'kudo' is the little star found underneath the avatar (picture) of the user. It's like giving them credit for the work they did.
Welcome to the community! We hope to see you posting soon.
Sincerely,
jakoby4204
Jakoby4204 New to the Community click here
Community Moderator

NEED HELP WITH ERRO MESSAGE 1437

so i have owned my 5th generation black 30gb ipod for a while now and yesterday i had to restart the computer.
trouble was that my ipod was syncing with my itunes and was plugged in.
i went into my itunes and it said that it could not read it so i googled my problem and then it said i had to restart my ipod and then restore it.
the restarting worked fine, but the restoring, not so good.
sometimes when i try to restore it it works, and then tells me to disconnect and reconnect. when i do that it tells me the same bs and that i need to restore it again, this time it either gives tells me that it cannot restore the ipod and that error 1437 occured.

I was getting Error Message 1437 this week and fixed it with a trip to the Apple Store. The main thing they did was hook the iPod up to a Mac, and choose Restore. While choosing Restore on my PC kept getting me Error Message 1437, Restore worked on the Mac (which has no Error Message 1437), and after restoring the iPod, it worked on my PC. The Apple Store Genius Bar staffer gave me some advice for if this happens again: 1. Select Add/Remove Hardware (bottom right of the screen) to see if the PC recognizes the iPod. 2. In folder C:\Program Files\iTunes, doubleclick on iTunes Helper, which won't show you what it's doing, but will reinstall drivers (if I'm getting this right) including the one which is somehow not working for you and giving you the 1437 message. 3. If all else fails, use Add/Remove Programs to uninstall iTunes (which, he said, will not eliminate your iTunes library), then redownload iTunes and reinstall it. Hope this helps.

HT202549 I need help with my messages app on my macbook pro.

I'm trying to send/receive messages to/from my son who recently switched from iphone to android. I have a 4s running ios 7.1.2 if that matters. When I try to send him a message through the messages app on my laptop, it says "(his number) is not registered with imessage." But my daughter who has an iphone 5 says that she gets his messages on her macbook pro and can also send messages to him from the messages app on there.
Any help would be much appreciated!
Let me know if you need any more information.

Hi WT13,
You can do that too but not with the current configuration that you have. To get SMS messages on your Mac, you would need to have iOS 8 on your iPhone and also be running OS X Yosemite on your Mac. Once you have that set up then you can enable SMS messages to have them forward to your Mac.
System requirements for Continuity on iPhone, iPad, iPod touch, and Mac
http://support.apple.com/en-us/HT6555
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
http://support.apple.com/en-us/HT6337
Take it easy,
-Norm G.

New to Java and need help with error message!

I have just installed the oracle jdbc driver and am now getting the following error message when trying to use the jbdc driver instead of the jdbc:odbc wrap driver...
See com.borland.dx.dataset.DataSetException error code: BASE+47
com.borland.dx.dataset.DataSetException: Chain of 2 or more Exceptions occurred
     at com.borland.dx.dataset.DataSetException.a(Unknown Source)
     at com.borland.dx.dataset.DataSetException.throwExceptionChain(Unknown Source)
     at com.borland.dx.sql.dataset.q.a(Unknown Source)
     at com.borland.dx.sql.dataset.Database.openConnection(Unknown Source)
     at com.borland.dx.sql.dataset.Database.createPreparedStatement(Unknown Source)
     at com.borland.dx.sql.dataset.o.a(Unknown Source)
     at com.borland.dx.sql.dataset.o.d(Unknown Source)
     at com.borland.dx.sql.dataset.o.f(Unknown Source)
     at com.borland.dx.sql.dataset.QueryProvider.e(Unknown Source)
     at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.open(Unknown Source)
     at com.borland.dbswing.JdbTable.bindDataSet(JdbTable.java:2749)
     at com.borland.dbswing.JdbTable.setDataSet(JdbTable.java:819)
     at myframes.ClaimView.btnSQL_actionPerformed(ClaimView.java:279)
     at myframes.ClaimView_btnSQL_actionAdapter.actionPerformed(ClaimView.java:440)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
     at java.awt.Component.processMouseEvent(Component.java:5100)
     at java.awt.Component.processEvent(Component.java:4897)
     at java.awt.Container.processEvent(Container.java:1569)
     at java.awt.Component.dispatchEventImpl(Component.java:3615)
     at java.awt.Container.dispatchEventImpl(Container.java:1627)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
     at java.awt.Container.dispatchEventImpl(Container.java:1613)
     at java.awt.Window.dispatchEventImpl(Window.java:1606)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Chained exception:
javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:640)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
     at javax.naming.InitialContext.getURLOrDefaultInitCtx(InitialContext.java:280)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.borland.dx.sql.dataset.q.a(Unknown Source)
     at com.borland.dx.sql.dataset.Database.openConnection(Unknown Source)
     at com.borland.dx.sql.dataset.Database.createPreparedStatement(Unknown Source)
     at com.borland.dx.sql.dataset.o.a(Unknown Source)
     at com.borland.dx.sql.dataset.o.d(Unknown Source)
     at com.borland.dx.sql.dataset.o.f(Unknown Source)
     at com.borland.dx.sql.dataset.QueryProvider.e(Unknown Source)
     at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.open(Unknown Source)
     at com.borland.dbswing.JdbTable.bindDataSet(JdbTable.java:2749)
     at com.borland.dbswing.JdbTable.setDataSet(JdbTable.java:819)
     at myframes.ClaimView.btnSQL_actionPerformed(ClaimView.java:279)
     at myframes.ClaimView_btnSQL_actionAdapter.actionPerformed(ClaimView.java:440)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
     at java.awt.Component.processMouseEvent(Component.java:5100)
     at java.awt.Component.processEvent(Component.java:4897)
     at java.awt.Container.processEvent(Container.java:1569)
     at java.awt.Component.dispatchEventImpl(Component.java:3615)
     at java.awt.Container.dispatchEventImpl(Container.java:1627)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
     at java.awt.Container.dispatchEventImpl(Container.java:1613)
     at java.awt.Window.dispatchEventImpl(Window.java:1606)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Here is the code causeing the error;
void btnSQL_actionPerformed(ActionEvent e)
try
String GET_DATASET = txtSQL.getText().trim();
Display("Executing...");
try
MyDisplayTable.setDataSet(null);
catch (DataSetException ex)
Display("ERROR 1: " + ex.toString());
try
queryDataSet1.close();
catch (DataSetException ex)
Display("ERROR 2: " + ex.toString());
try
queryDataSet1.setQuery(new com.borland.dx.sql.dataset.QueryDescriptor(
database1, GET_DATASET, null, true, Load.ALL));
catch (DataSetException ex)
Display("ERROR 3: " + ex.toString());
try
if (!queryDataSet1.isOpen()) {
queryDataSet1.open();
catch (DataSetException ex) {
Display("ERROR 5: " + ex.toString());
try {
queryDataSet1.refresh();
catch (Exception ex) {
Display("ERROR 5.5: " + ex.toString());
try {
Display("setDataSet");
MyDisplayTable.setDataSet(queryDataSet1);
Display("DONE setDataSet");
catch (DataSetException ex) {
Display("ERROR 6: " + ex.toString());
Display("Query: ' " + GET_DATASET.trim() + " ' was executed successfully");
catch (Exception ex)
Display(ex.toString());
Please let me know if more information is required. I am completely at a loss as to what more I need to do to get this to work using the new driver.
Thank you all in advance,
Malcolm Diaz
Application Developer
[email protected]
PlanVista Solutions Inc.
419 E.Main St.
Middletown NY 10940
845-346-2692

this is more of a jdbc question rather than an internationalization. You might be able to get more help if you post it in java programming section.

I need help with a little glitch

I can't figure out why, but one of the menus I made keeps
getting stuck while animating in. I have two menus that use the
exact same code, but with different handlers and names, but for
some reason the second one alway gets stuck on it's initial run. So
when I play my swf, the movie plays and then I hit "menu", and the
first menu slides in perfectly, but when I hit the button to open
"directions" (havent made the rest of my buttons link to anything
yet), the menu attempts to slide in, but gets stuck, does so in a
really jerky movement, or doesnt come in at all. But when you try
it the second time around, it works flawlessly.
take a look for yourself and tell me what you think please,
because I need to fix this.
http://www.myspace.com/thehauntedmuseum
Here is my code:
the instance name of the menu with the difficulty is "menu2"
Attach Code
stop();
import flash.accessibility.AccessibilityProperties;
import fl.video.FLVPlayback;
import flash.display.Scene;
import flash.display.MovieClip;
import fl.video.VideoEvent;
theVideo_mc.playWhenEnoughDownloaded();
theVideo_mc.playPauseButton = player_mc;
theVideo_mc.muteButton = muter_mc;
theVideo_mc.bufferingBar = buffer_mc;
import fl.video.VideoEvent;
theVideo_mc.addEventListener(VideoEvent.COMPLETE,doCompleteVideo);
function doCompleteVideo(evt:*):void {
theVideo_mc.pause();
doDisplayMenu();
menu_btn.addEventListener(MouseEvent.MOUSE_DOWN,doCompleteVideo);
function doDisplayMenu():void {
import flash.filters.BitmapFilterQuality;
import flash.filters.BlurFilter;
var blur:BlurFilter = new BlurFilter();
blur.blurX = 15;
blur.blurY = 15;
blur.quality = BitmapFilterQuality.HIGH;
theVideo_mc.filters = [blur];
import flash.filters.BitmapFilterQuality;
import flash.filters.BlurFilter;
var blur2:BlurFilter = new BlurFilter();
blur.blurX = 0;
blur.blurY = 0;
blur.quality = BitmapFilterQuality.HIGH;
menum1.filters = [blur];
import fl.transitions.Tween;
import fl.transitions.easing.*;
var myTween:Tween = new Tween(menum1, "x", Elastic.easeOut,
menum1.x, 256 , 3 , true);
menum1.menum1_1.hider.addEventListener(MouseEvent.MOUSE_DOWN,hidden);
function hidden(event:MouseEvent):void {
theVideo_mc.play();
import fl.transitions.Tween;
import fl.transitions.easing.*;
var myTween2:Tween = new Tween(menum1, "x", Elastic.easeOut,
menum1.x, 1174 , 3 , true);
import fl.transitions.Tween;
import fl.transitions.easing.*;
var myTween3:Tween = new Tween(menu2, "x", Elastic.easeOut,
menu2.x, -662 , 3 , true);
import flash.filters.BitmapFilterQuality;
import flash.filters.BlurFilter;
var blur:BlurFilter = new BlurFilter();
blur.blurX = 0;
blur.blurY = 0;
blur.quality = BitmapFilterQuality.HIGH;
theVideo_mc.filters = [blur];
menum1.menum1_1.directions.addEventListener(MouseEvent.MOUSE_DOWN,mapShow);
function mapShow(event:MouseEvent):void {
import fl.transitions.Tween;
import fl.transitions.easing.*;
var myTween4:Tween = new Tween(menu2, "x", Elastic.easeOut,
menu2.x, 256 , 3 , true);
menum1.menum1_1.directions.addEventListener(MouseEvent.MOUSE_DOWN,mapShow2);
function mapShow2(event:MouseEvent):void {
import flash.filters.BitmapFilterQuality;
import flash.filters.BlurFilter;
var blur:BlurFilter = new BlurFilter();
blur.blurX = 15;
blur.blurY = 15;
blur.quality = BitmapFilterQuality.HIGH;
menum1.filters = [blur];
menu2.menu2_1.closer2.addEventListener(MouseEvent.MOUSE_DOWN,mapHide);
function mapHide(event:MouseEvent):void {
import fl.transitions.Tween;
import fl.transitions.easing.*;
var myTween5:Tween = new Tween(menu2, "x", Elastic.easeOut,
menu2.x, -662 , 3 , true);
import flash.filters.BitmapFilterQuality;
import flash.filters.BlurFilter;
var blur:BlurFilter = new BlurFilter();
blur.blurX = 0;
blur.blurY = 0;
blur.quality = BitmapFilterQuality.HIGH;
menum1.filters = [blur];
var myMenu:ContextMenu = new ContextMenu();
var item0:ContextMenuItem = new ContextMenuItem("©"+"
Blankenstein Creations");
var item1:ContextMenuItem = new ContextMenuItem("The Haunted
Museum");
var item2:ContextMenuItem = new
ContextMenuItem("www.pennypickles.org");
myMenu.hideBuiltInItems();
myMenu.customItems.push(item0,item1,item2);
contextMenu = myMenu;
item2.addEventListener(ContextMenuEvent.MENU_ITEM_SELECT,
goToURL);
function goToURL(event:ContextMenuEvent):void {
navigateToURL(new URLRequest("
http://www.pennypickles.com"),
"_parent");
addEventListener ( 'enterFrame', callback_handler)
function callback_handler(evt:*):void {
var today:Date = new Date();
var currentYear = today.getFullYear();
var currentTime = today.getTime();
var targetDate:Date = new Date(currentYear,9,31,0,1);
var targetTime = targetDate.getTime();
var timeLeft = targetTime - currentTime;
var sec = Math.floor(timeLeft/1000);
var min = Math.floor(sec/60);
var hrs = Math.floor(min/60);
var days = Math.floor(hrs/24);
sec = String(sec % 60);
if(sec.length < 2)
sec = "0" + sec;
min = String(min % 60);
if(min.length < 2 )
min = "0" + min;
hrs = String(hrs % 24);
if(hrs.length < 2)
hrs = "0" + hrs;
days = String(days);
var counter:String = days + " : " + hrs + " : " + min + " : "
+ sec;
time_txt.text = counter;

sorry about the delay and not telling my system specs. well here they are...I am running on Windows XP Home Edition with Service Pack 1 and my computer specs are...Intel Pentium 4 CPU 1.8 Ghz and 256 MB of RAM.and the mother board came with it. It is a Dell Dimension 4500, and I upgraded the video card to the one im having trouble with. Thank you for your time. Please Help!!!8-|

Need help with error message

I am running Photoshop elements 5.0 on Windows Vista. After downloading some pics that froze the download in the middle, I now get an error message when I try to open the organizer. Message is as follows:
Microsoft Visual C++ Runtime Library
The application has requested Runtime to termiinate it in an unusual way.
Can anyone help me with this problem.

Have you applied the 5.0.2 patch. That may help.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3569

Need Help with error message on the Network Systems Preferences, Please

In Systems Preference, > Network, I get the error message "Your network settings been changed by another application," with an active OK button. However, when I click the OK button, it persists and does not allow me to access the screen. The only way to end this is to force quit Systems Preferences.
Do you have any idea what is causing this freeze? I have a TimeWarner Internet connection (which I want to change to Verizon as soon as I resolve this). For a while I had Earthlink DSL which didn't work well at all. Could it be something with the not-used Earthlink or the current TimeWarner?
Any ideas about the cause and, more importantly, the solution?
Thanks,
Jeanie

My computers have not been networked, intentionally. I like having them autonomous. So I have a separate Internet connection for each. And maybe that's what I need to maintain.
In the house is a Mac Mini and the house phone with new Verizon modem. In the separate office, I have my G5 tower, which is really my main computer.
Was just on phone with Verizon Tech who did say that they do not support Mac. They made a decision not to because there are fewer of us. However, I can purchase a premium support which appears to cover such support.
I've not seen the Verizon commercials, but I expect that they are filled with hype. The one I laugh at the most on the FIOS cable video is that they call their cable user interface "intuitive."

Need help with error message "Numbers can't be diided by 0"

I'm trying to do a calculation where there may or may not be data provided by the spreadsheet user. In other words, If there is data, I want this function to preform on it and if there is no user-generated data, I need the cell to display as "0". I'm nowhere near a power user in numbers so if anyone out there can help, I would be really grateful. As you can see, I have a lot of questions tonight that I am stuck on and I can't go to bed until I figure them out
Thanks!

Assuming that you wish to divide by the contents of a cell in column B
Here are two formulas which may help.
=IF(ISBLANK(B),"",12/B)
=IF(ISERROR(1/B),"",12/B)
My best choice is the second one which works well with blank cells, cells containing a true zero, cells containing a string or a date.
Yvan KOENIG (from FRANCE mardi 18 novembre 2008 12:00:06)

Need help with error message after failed iSync: Leopard and Palm OS

I recently upgraded to a new computer which came with Leopard installed. In my old computer, Tiger OS, all was well when syncing to my Palm device.
I tried going from handheld to desktop with slow synch turned on in iSync and now I get this message re: failure--
"iSync Conduit starting 9/6/08 8:21:12 AM
Timeout waiting for Sync Engine, exiting 9/6/08 8:27:31 AM
iSync Conduit synchronization failed
“iSync Conduit” failed (error = #-2)"
Any ideas--please help.

I wish you success.
I have an older Palm, the Zire. Once I got the most recent Palm software and chose, at least for now, to use iSync, I haven't noticed any problems.
Since I haven't used the "T" family of Palms, I can only guess that the process is much the same as with the Zire. You can disable the MAc syncing, move your currently disabled conduits back into Palm syncing, reinstall what Palm lists as your most recent software (and make sure all of your calendar and contacts info is just as you want it), do a sync through the HotSync Manager (ignoring iCal). I'd do a restart just to clear the system. It appears there is a warning note on resetting the iSync history, so you might not want to do that but just manually clean up any inconsistencies in iCal before you try once again.
[I actually wanted to just accept my Palm calendar so trashed my iCal calendar after some questionable syncs, but you can do an export to save the iCal calendar before you wipe it out.]
But my impression is that to get pass the messages you initially wrote up, you'll have to ask the Palm discussions folks for help. They are very helpful.
ec

Novice (Ok Rookie) need help with error message

Hello all, I hope that you can help. I am getting this error
message when trying to submit registration information to the
database that I have created.
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] You cannot add or
change a record because a related record is required in table
'UserTypes'.
The error occurred in
C:\CFusionMX7\wwwroot\Development\signup.cfm: line 67
65 : <cfelse>
66 : NULL
67 : </cfif>
68 : , 0
69 : , 1
SQL INSERT INTO C:\CFusionMX7\wwwroot\database\wwf2.Users
(UserName, Password, FirstName, LastName, EmailAddress, Address,
City, "State", ZipCode, "Admin", Allowed, UserTypeId) VALUES (
(param 1) , (param 2) , (param 3) , (param 4) , (param 5) , (param
6) , (param 7) , (param 8) , (param 9) , 0 , 1 , 3 )
DATASOURCE WWF2
VENDORERRORCODE -1613
SQLSTATE 23000
Here is the code for that page
Any help would be much appreciated. Thank you all so much.
Damien

quote:
Originally posted by:
DRufus
When I created the form, I used dreamweavers record insertion
wizard. could this be the issue. I'm sorry if I am not
understanding your solution.
Usage of <cfselect> is explained in the cfml reference
manual. If you don't have one, the internet does. The quickest way
to find it is to google the name of the tag, complete with angle
brackets.
I can't comment on dreamweaver's wizards because I never use
them.

Extended Program check: Need help with error messages

Hi,
I am getting the following error message several time on different internal table declarations:
"Tables with headers are no longer supported in the OO context."
This is the data declaration that it refers to:
I_ZDAILY_MVMT TYPE TABLE OF ZDAILY_MVMT WITH HEADER LINE.
Also, I am getting the following:
You cannot use the "RANGES" statement within classes. Instead, use the "DATA"
statement with the type "TYPE/LIKE RANGE OF" . . . . . . . . .
This is for the following data declaration:
RANGES: I_WERKS FOR EBAN-WERKS, "PLANT RANGE
        I_VTWEG FOR I_TVTW-VTWEG,
        I_VTWEG2 FOR I_TVTW-VTWEG,
        I_VKORG FOR I_TVKO-VKORG,
        I_AUART FOR I_TVAK-AUART.
What do I change and then how do i populate them?
Thanks,
John
Message was edited by:
        John Damion

We dont use tables with header lines any more.
Declare a work area and use it transfer the data.
e.g.
types: types_ZDAILY_MVMT TYPE standard table of TABLE OF ZDAILY_MVMT.
data: I_ZDAILY_MVMT TYPE type_ZDAILY_MVMT,
        wa_zdaily type zdaily_mvmt.
Now use this work area to move data into the table.
Regards,
Amit
Reward all helpful replies.

6300 need help with picture message settings

hello
i cant seem to find how to enter my picture message settings
could someone please explain just what to do
i have the following from my provider
Advanced Options- TCP/IP= Check the box for APN settings enabled APN: uk.lebara.mobi We do not enable authentication.

call your operator and ask them to send the settings over the air these normally come in via text and when you recieve the message you will be given the option to save or discard,so save the message and select as default
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Need Help with Group Message Glitch

Similar Messages

Maybe you are looking for