Need help with InDesign interactive PDF

Ive created an interactive pdf through InDesign Digital Publishing. When I preview it in the folio builder everything is working the way I set it up. But when I publish and go to adobe's Digital Publishing to view it, only a few pages will show. I tried sharing it with another and they can only view two of the 10 pages. And the 2 pages they see do not work well. I was in CS6 and am upgrading to Cloud hoping that might help? Any ideas of what im doing wrong?

This is my first file I have built in InDesign's Digital Publishing Layout. I built it as an iPad format horizontal and vertical layouts in one file. I added it as an article to one folio (first as pdf and also tried automatic). I created it with buttons, some basic animation (images that fade from one to another). Pretty basic stuff. When I go to view it in the folio builder or folio layers it is fine. When I click on folio producer it sends me to: https://digitalpublishing.acrobat.com/app.html#x=folioproducer to view the "content" which isn't all there. And that is what is seen on the iPad.  Does that make sense? I new to this and obviously doing something wrong. Thanks for any advice to get this to work.

Similar Messages

  • I need help with Indesign.

    I am working on a book project using Indesign 1.5. I have got a new computer. Installation of the Indesign software was problem free but when i open my book project i have a problem that i can not figure out.
    When i put the marker in the middel of a text and pressing the enter tab, to move it down a line,  the text after the marker disappear and a red + showing at the bottom of the text box.
    I will appresiate it a lot if anyone can give me help with this set up problem!

    Try pressing the primary Enter key to the right of the Home Row, not the Enter key in the number pad. If that doesn’t work, look at your paragraph spacing options wherever the paragraph formatting is in that version. Space Above or Space Below might be set too high.
    In the future, please both use a more appropriate subject line and provide your platform. This forum is for people needing help with InDesign, so “I need help with Indesign” is just as helpful as leaving the subject line blank. We’re here to help you.

  • Need help with Adobe Interactive Form Saving

    Hi Gurus,
    I need your help with Adobe Interactive form saving.
    I have written the code in pre-save event to prompt a message when user didn't enter any value before saving. The form data should not be saved upon clicking save (Just prompt the message and exit form the form). Can u please advice me how to do this.
    Regards,
    Srini

    see the link: http://forms.stefcameron.com/2008/04/
    it says:
    preSave: Failed validations will not prevent the form from being saved however Acrobat/Reader will issue a special warning message, after issuing the validation error message, to inform the user that the validations failed. Iu2019m guessing this is because the user may be saving the form to continue filling it at a later time so the save canu2019t be completely prevented.
    regards,
    BJagdishwar.

  • Help! InDesign interactive PDF buttons not working in Safari or on iPad

    I made an infographic in Indesign for our university magazine with a QR code to link to an interactive pdf. Nothing too complicated animation wise, simply buttons that you can click on to view different parts of the graphic. However, the buttons are not working at all in Safari and on the iPhone and iPad, the buttons disapear completley. Please help.
    http://bit.ly/yrTN4R?r=qr
    Thanks,
    Gretchen

    Whether buttons work correctly in a PDF file depend entirely on what PDF reader you're using. Here are a couple of important facts:
    * While corrected created interactive PDFs will display correctly in the FREE Adobe Reader and Adobe Acrobat, they probably won't display correctly in Apple's Preview application which is probably what you're viewing in Safari.
    * None of the PDF readers currently available on an iPad (e.g., iBooks, GoodReader, etc.) correctly handle interactivity like buttons on an iPad.

  • Need help with InDesign 2.02

    I have an old version of InDesign: InDesign 2.02. It is quitting when I open it, telling me that I have a conflict with Text Wrap plugins, and to remove one of them, which I did, without success. I also used my Mac disc utility app and cleared up any problems that might have occurred with the hard drive. Also, I would like to upgrade to the next InDesign version, but don't even know what to upgrade to. Can someone help here? I have a 2003 IMac running OS 10.4.11.

    Given those hardware and budget constraints, I'd try to fix the existing system.
    First do a Finder search for Text Wrap plugins.
    There should be exactly three (the path to the InDesign folder may differ)
    /Applications/Adobe InDesign 2/Required/Text Wrap
    /Applications/Adobe InDesign 2/Required/Text Wrap Path
    /Applications/Adobe InDesign 2/Plug-Ins/Layout/Text Wrap Panel
    Eventually it is sufficient to log in as a different user, and launch InDesign from there.
    Then clean your preferences. Take Peter's instructions below with a grain of salt - ID2 will differ.
    http://forums.adobe.com/thread/526990
    I think the keyboard shortcuts to purge prefs have only been added with InDesign 3 (CS1).
    More desparate measures:
    Remove (archive, or at least rename) the useless old InDesign installation before you retry the Installer.
    If nothing else helps:
    Do you have any spare disk (i.e. external firewire) or separate internal volume that you could use for a clean OS and InDesign install? There are cheap FW to SATA adapters that you could use for a new disk, most budget disks today internally have SATA. Back in that time I was only using Laptops, so I do not know whether your system already has the faster USB2. If so use that, you'd then not need FW.
    Dirk

  • Need help with Adobe Interactive Forms

    Hi Gurus,
    In my Adobe Form, I have large data and I need to add new body page horizontally after my Master Page. Can any body help me?
    Regards,
    Srini

    You don´t display the body page, it is a template. So you onlyinstantiate the master page. If you want to have some pages with different orientation or something, create a second master page and control the use of the templates/ masters for the body pages/ subforms/content part of the form.
    Regards Otto

  • Need help with emailing a pdf file

    how do i upload a finished pdf file to send in an email?

    When you open your document using Adobe Reader, you will see a toolbar when on the top when you tap gently on the document.
    Tap on the second icon from right to share your document via email or any other application.
    Hope this helps.
    Thanks,
    Adobe Reader Team

  • I need help with combining two pdf files together but it won't let me in the latest Acrobat DC?

    Hi,
    I had two ai files, 11 by 17 on separate pages, and made them into pdf's. When I combine the files, it will let one out of the two files go through. The funny thing is that it will let the larger file go through than the smaller file. The file that went through had been in  ai, dropped it into photoshop and put it back into ai again. The file that won't go through is a quote with different text. What should I do? What does pdf/a, pdf/x, pdf/e and preflight mean?
    Thank you

    Make sure neither of the PDF have been secured in some manner like password protection, form rights or forms distribution.
    Forms created with live cycle cannot be combined by Acrobat.

  • Color selection tool has stopped working [was: need help with indesign cs6]

    I am working in InDesign cs6 and my color selection tool stopped working.

    Do I reply here? I have been creating a newspaper in InDesign cs6 and the color selection box won't work any longer.  It used to work just fine, but now it won't let me access it.
    Someone in tech support last night before they went away, was directing me to: Go to Folder from my desktop, and then to Preferences, then to ~/Library/, then to InDesign version 8.0 and en US.  Then we lost contact and I didn't know what to do next, so I still have the problem.

  • I need help with InDesign Error messages (bad Plug-ins)

    I get "Startup Alerts" when trying to launch InDesign. Does not recognize a series of Plug-ins.
    Error 1:
    Cannot load the Swatch Library Panel.InDesignPlugin plug-in. It is dependent on the Swatches Panel.InDesignPlugin plug-in, which failed to load. Please check documentation for the Swatches Panel.InDesignPlugin plug-in.
    Error 2:
    Cannot load the Transparency UI.InDesignPlugin plug-in. It is dependent on the Swatches Panel.InDesignPlugin plug-in, which failed to load. Please check documentation for the Swatches Panel.InDesignPlugin plug-in.
    Error 3:
    Cannot load the ObjectStylesUI.InDesignPlugin plug-in. It is dependent on the Transparency UI.InDesignPlugin plug-in, which failed to load. Please check documentation for the Transparency UI.InDesignPlugin plug-in.
    Error 4:
    Cannot load the Text Color Panel.InDesignPlugin plug-in. It is dependent on the Swatches Panel.InDesignPlugin plug-in, which failed to load. Please check documentation for the Swatches Panel.InDesignPlugin plug-in.

    I am on InDesign CC and on a mac.
    It worked to reinstall the program via my Creative Cloud app.
    First I had to uninstall the app though...
    Go> Utilities> Adobe Installers
    Thank you!

  • Need help with InDesign CS2 table

    How do you add multiple cells vertically to 1 row in a table? When I try to do this it add cells to the entire table. When I try to adjust them by clicking and dragging right or left, it moves all the other cells. I am using IDCS2

    CS2 is a little primitive, but put your cursor in the cell you want to divide, then Table > Split Cell Vertically (or horizontally), which will divide it in half. Repeat as necessary. To adjust the dimensions of the split cells over the text tool over a divider until you see the double-headed arrow, then press the Shift key while dragging the divider.

  • Need help with InDesign Data Merge

    I have set up a 5 x 8 postcard to print two up. When I use the multiple records option expecting to get two different addresses per page, it does not work. I get one address per page repeated twice. It also shifts all the graphi content of my postcard over about two inches to the right. Am I misunderstanding how the multiple records option is supposed to work? I am not using a multiple page document.

    To do multiple records per page you must have only one set of placeholders set up. ID will duplicate everything on the page.

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

    I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

    You mean an image such as a scanned document?
    If that is the case, the file doesn't contain any text for Reader Out Loud to read. In order to fix that, you would need an application such as Adobe Acrobat that does Optical Character Recognition to convert the images to actual text.
    You can also try to export the file as a Word document or something else using ExportPDF which I believe offers OCR and is cheaper than Acrobat.

Maybe you are looking for