Need help with infinity data extencion kit

i had bt infinity installed the other day and was not told i need a better wireless card to get full speed i rang up bt and they told me my wireless card is not compatable to go above 20mb so i ask them to send out a data extencion kit and they told me they will need to send out someone and it will cost £205 for it all, Surly this should be part of the install or at least the engineer should have discussed this with me please someone help

Read this topic
http://community.bt.com/t5/BB-in-Home/Data-Extension-Kit/td-p/64869
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me

Similar Messages

Need help with saving data and keeping table history for one BP

Hi all
I need help with this one ,
Scenario:
When adding a new vendor on the system the vendor is suppose to have a tax clearance certificate and it has an expiry date, so after the certificate has expired a new one is submitted by the vendor.
So i need to know how to have SBO fullfil this requirement ?
Hope it's clear .
Thanks
Bongani

Hi
I don't have a problem with the query that I know I've got to write , the problem is saving the tax clearance certificate and along side it , its the expiry date.
I'm using South African localization.
Thanks

Hi, I need help with the dates of plugins added to my browser

Hi I need to know what date a plugin was installed on my browser.
openh264 / video codec provided by cisco systems.
If you can't help, please point me in the direction of someone who can?
Any help greatly appreciated.

The new "OpenH264 Video Codec provided by Cisco Systems, Inc." plugin that now shows up in the Firefox Add-ons Manager Plugins list was added in Firefox 33.0. It's installed in a subfolder of your [[Profiles|Firefox profile folder]], which you can confirm by typing '''about:plugins''' in the Firefox address bar to bring up a list of installed plugins (details [http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins here]) and checking its "Path" entry .
The first link in the [https://www.mozilla.org/en-US/firefox/33.0/releasenotes/ Firefox 33.0 release notes] under What’s New, has this:
'''New''' | [http://andreasgal.com/2014/10/14/openh264-now-in-firefox/ OpenH264 support] * (sandboxed)
[*] Quoted from the linked page, http://andreasgal.com/2014/10/14/openh264-now-in-firefox/
(which also includes a [https://andreasgal.files.wordpress.com/2014/10/openh264.jpg screenshot] of the Add-ons Manager entry):
<blockquote>Today in collaboration with Cisco we are shipping support for H.264 in our WebRTC implementation. </blockquote>
<blockquote>Cisco has agreed to distribute OpenH264, a free H.264 codec plugin that Firefox downloads directly from Cisco.</blockquote>
<blockquote> Note: Firefox currently uses OpenH264 only for WebRTC and not for the <nowiki><video></nowiki> tag, because OpenH264 does not yet support the high profile format frequently used for streaming video. We will reconsider this once support has been added. </blockquote>
See also:
*https://wiki.mozilla.org/Media/WebRTC
*https://wiki.mozilla.org/GeckoMediaPlugins

Need help with enhanced data source in Production system

Hello Gurus,
1. I enhanced a datasource in BW and populated the field using customer exit using CMOD function. In Dev system, i dont have much data, so I deleted the whole data and did full load.
what shud I do in Production side, so that Delta wudnt be affected??since in production, we have millions of records, we wont do full load., what is the best way to populate the field in production after transporting the datasource to production without disturbing delta's, to reflect the new field for previous years data???
2. can we put 0customer and 0material in the same dimension?? how its going to affect the performance?
Thanks in advance.,
Best Regards,
Pavan

Hi,
Please see this
1.
see this thread
populated the new field with historic data
2. can we put 0customer and 0material in the same dimension?? how its going to affect the performance?
Its better not to use them in a single dimension because one customer and take more than one material so if you have 100 customer and 1000 materials this combination will generate a large number of records. Its always better to keep characteristic which are having 1:N relation ship in one dimensional in you case customer and material will have an M:N type of relationship.which will result in slow performance.
Regards,
Ravi

Need help with Rollback data if there is error in Data load

Hi All,
We are trying to load data to Oracle 11g database. We want a trigger, procedure or something like that to rollback the data if there are errors in load. Is it possible to do rollback after all the records has been parsed ? So if we try to load 100 records and if there are 30 records with error, we want to rollback after all the 100 records are parsed.
Please advice.

>
Thanks for the suggestion. I'll try that option. So currently we are only loading data that is validated and erroneous records are rejected using trigger. So we don't get any invalid data in table. But Now users are saying that all the records should be rejected if there is even one error in the data load.
>
I generally use a much simpler solution for such multi-stage ETL processes.
Each table has a IS_VALID column that defaults to 'N'. Each step of the process only pulls data with the flag set to 'Y'.
That allows me to leave data in the table but guarantee that it won't be processed by subsequent stages. Since most queries that move data from one stage to another ultimately have to read table rows (i.e. they can't just use indexes) it is not a performance issue to add a predicate such as "'AND IS_VALID = 'Y'" to the query that accesses data.
1. add new unvalidated data - automatically flagged an invalid by default of 'N" on IS_VALID column
2. run audit step #1 - capture the primary key/rowid of any row failing the audit.
3. run audit steps #2 through #n - capture error row ids
4. Final step - update the data setting IS_VALID to 'Y' only if a row passes ALL audits: that is, only if there are NO fatal errors for that row captured in the error table.
That process also allows me to capture every single problem that any row has so that I can produce reports for the business users that show everything that is wrong with the data. There are some problems that the business wan't to ignore, others that can be fixed in the staging tables then reprocessed and others that are rejected since they must be fixed in the source system and that can take several days.
For data that can be fixed in the staging tables the data is fixed and then the audit is rerun which will set the IS_VALID flag to 'Y' allowing those 'fixed' rows to be included in the data that feeds the next processing stage.

Need help with converting date format to decimal in SSRS expression.

Hi all,
I have a decimal data type column with a record in the following format 20150219 --> yyyyMMdd. And I am trying to convert the return value from SSRS date/time parameter to a decimal value.
The TMDTOP column is the decimal data type with date records in yyyyMMdd format.
My return parameter is the following:
=IIf(IsNothing(Parameters!SystemDate.Value),Fields!TMDTSY.Value,CDec(Format(Parameters!SystemDate.Value,"yyyyMMdd")))
When I try to run the report I get the following error:
Failed to evaluate the FilterValue of the DataSet ‘DataSet1’. (rsFilterEvaluationError)
I appreciate if anyone can help me on solving this problem.
Thanks in advance.

why casting date to decimal here? Can you explain?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Need help with recovering data from a truecrypt HDD

I have done something stupid, I have run fdisk on my truecrypt hdd by mistake, and created 2 new partition. the 1st one on 67mb and the 2sd for the rest of the hdd.
Can someone plz help me with restoring the data? I am not really sure there to begin.

Get testdisk. I use Parted Magic to recover partitions with Testdisk. So long as you can decrypt the resurrected partitions AND provided you have NOT written to those two partitions after they were fdisk'ed you should be able to recover from this mess. I really recommend PartedMagic for this sort of thing only because it has a good interface and a lot of other tools in one place.
Testdisk isn't hard to use and there are mini-tutorials out there if you're really stuck such as these links from our wiki:
Testdisk and Photorec

I need help with 'Documents & Data' taking up all the space on my iPhone

Hello, I have searched for days on the internet for a way to solve my problem but nothing and I really mean NOTHING seems to work at all.
I can't buy any software either.
When I go into Settings>iCloud Documents & Data are off and have been off all the time. Yet I STILL have Documents & Data taking up 5 GB of my phone and I don't have much space either.
I have hopelessly tried deleting most of my messages and NONE and I mean NONE of the space has been given to me, nothing changed but my messages completely disappeared. No I do not use iCloud and I have the latest software updates. My phone is not jailbroken. I even tried deleting most of my apps and installing them again but that didn't work either. Photos take a small amount of space on my iPhone.
I really hope someone can help me this is a really big issue for me and I do not fancy resetting the phone back to its Factory settings.
I am new to the apple forum so sorry if this isn't in the right category or something. Thank you in advance. I also do not really fancy going all the way to the centre of the city to go to a Genius Bar.
By the way, a few minutes ago I tried backing up my iPhone and syncing it again and a message popped out telling me that I need additional 4 GB of space in order to let it sync and I do not understand this, Documents & Data take more and more of my space every time I look. Also all the messages I delete come right back when I turn the phone on and off.

Hi demolitonlovers,
If you have unaccounted for data taking up storage space on your iPhone, you may find the following articles helpful in identifying what is taking up the space and how to remove it:
iPhone, iPad, and iPod: Understanding capacity
http://support.apple.com/kb/ht1867
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Regards,
- Brenden

Need help with saving data

I recently started studying in IT at college, and I think I have the basics in Java programming, however we haven't
been taught how to save data in our apps, so everytime i close my app, I lose all changes.
I went through Sun's IO tutorial, as well as a few tutorials online and I made a small application to practice saving my
Objects, however I can't seem to get it to work. I was hoping someone could look at my code and tell me what seems
to be my problem.
There are 3 classes in my project. The Base class makes a List that holds objects of type Person. the UIPerson class
has 3 buttons (Add, Save, Load) and a JList. When clicking on Add, it adds a new Person in the base and is shown in
the JList. The saving and loading is what I have trouble with.
UIPerson :
public class UIPerson extends JFrame implements Serializable{
     private JFrame jFrame = null;
     private JPanel jContentPane = null;
     private JButton jbAdd = null;
     private JButton jbSave = null;
     private JButton jbLoad = null;
     private JList list = null;
     private Base base = null;
     public static void main(String args[]){
          UIPerson personList = new UIPerson();
     public UIPerson(){
               base = new Base();
               Container pane = getContentPane();
               setSize(288, 309);
               setVisible(true);
               jContentPane = new JPanel();
               jContentPane.setLayout(null);
               jbAdd = new JButton();
               jbAdd.setBounds(new Rectangle(24, 59, 58, 24));
               jbAdd.setText("Add");
               jbAdd.addActionListener(new java.awt.event.ActionListener() {
                    public void actionPerformed(java.awt.event.ActionEvent e) {
                         String Name, famName;
                         Name = JOptionPane.showInputDialog("Enter Name", null);
                         famName = JOptionPane.showInputDialog("Enter Family Name", null);
                         base.addPerson(new Person(Name, famName));
                         list.setListData(base.listPerson());
               jbSave = new JButton();
               jbSave.setBounds(new Rectangle(19, 106, 69, 34));
               jbSave.setText("Save");
               jbSave.addActionListener(new java.awt.event.ActionListener(){
                    public void actionPerformed(java.awt.event.ActionEvent e){
                         try{
                              FileOutputStream fos = new FileOutputStream("temp.dat");
                              ObjectOutputStream oos = new ObjectOutputStream(fos);
                              oos.writeObject(base);
                         catch(Exception ex){
                              System.out.println("Save Failed");
               jbLoad = new JButton();
               jbLoad.setBounds(new Rectangle(23, 154, 70, 29));
               jbLoad.setText("Load");
               jbLoad.addActionListener(new java.awt.event.ActionListener(){
                    public void actionPerformed(java.awt.event.ActionEvent e){
                         try{
                              FileInputStream fis = new FileInputStream("temp.dat");
                              ObjectInputStream ois = new ObjectInputStream(fis);
                              base = (Base)ois.readObject();
                              list.setListData(base.listPerson());
                         catch(Exception exc){
                              System.out.println("Load Failed");
               list = new JList();
               list.setBounds(new Rectangle(133, 47, 139, 151));
               jContentPane.add(jbAdd);
               jContentPane.add(jbSave);
               jContentPane.add(jbLoad);
               jContentPane.add(list);
               pane.add(jContentPane);
}Base :
public class Base implements Serializable{
     private ArrayList<Person> list;
     public Base(){
          list = new ArrayList<Person>();
          list.clear();
     public void addPerson(Person person){
          list.add(person);
     public void deletePerson(Person person){
          list.remove(person);
     public Person[] listPerson(){
          Person tab[] = new Person[list.size()];
          list.toArray(tab);
          return tab;
     public Person getPerson(Person person){
          ListIterator<Person> iterator = list.listIterator();
          Person current = null;
          while (iterator.hasNext()){
               current = iterator.next();
               if (current.equals(person))
                    return current;
          return null;
}Person :
public class Person {
     private String name, familyName;
     public Person(String name, String familyName){
          this.name = name;
          this.familyName = familyName;
     public String getName(){
          return name;
     public String getFamilyName(){
          return familyName;
     public String toString(){
          return name + " " + familyName;
}I'd appreciate any help that could be given.

My probelm is with my save/load funtions only, sorry for the extra code. Everytime i press on save or load, they
throw an IOException. Heres the code I specifically wanted viewed to know if there are any mistakes in it.
Save Button :
jbSave.addActionListener(new java.awt.event.ActionListener(){
          public void actionPerformed(java.awt.event.ActionEvent e){
               try{
                    FileOutputStream fos = new FileOutputStream("temp.dat");
                    ObjectOutputStream oos = new ObjectOutputStream(fos);
                    oos.writeObject(base);
               catch(FileNotFoundException ex){
                    System.out.println("(Save)File Not Found Exception");
               catch(IOException ex){
                    System.out.println("(Save)IOException");
     });Load Button :
jbLoad.addActionListener(new java.awt.event.ActionListener(){
          public void actionPerformed(java.awt.event.ActionEvent e){
               try{
                    FileInputStream fis = new FileInputStream("temp.dat");
                    ObjectInputStream ois = new ObjectInputStream(fis);
                    base = (Base)ois.readObject();
                    list.setListData(base.listPerson());
               catch(FileNotFoundException exc){
                    System.out.println("(Load) File not found exception");
               catch(IOException exc){
                    System.out.println("(Load) IO Exception");
               catch(ClassNotFoundException exc){
                    System.out.println("(Load) Class not found exception");
     });

Need help with importing data in partition table

Hi,
DB:8.1.7
OS: win 2003 server
I have a table which is 4.5GB in size. I created a new partition table,with local indexes. I exported the original table with all indexes,triggers and procedures.
After creating the empty partitioned table,i imported the dump file. The data isn't loaded. My questions are:
1) Will the indexes be overwritten?
2) Will the data go automatically in allocated partitions?
3) Do i need to export only table data ignoring indexes,triggers etc?
Best Regards,

ateeqrahman wrote:
1) Will the indexes be overwritten?Not if they already exist with the same name, or with the same logical definition (ie. same columns are already indexed)
2) Will the data go automatically in allocated partitions?Yes
3) Do i need to export only table data ignoring indexes,triggers etc?Do you need the triggers? do you need indexes that you haven't created manually? What about grants?

Need help with JTable data selection.

Hi,
I have a table with multiple rows and each row has a checkbox.user might select checkbox for any row. i want to capture data of all those rows where checkbox is checked. i need to capture data on the click event of my Jbutton.kindly suggest how to proceed.
Thanks

hii,
1/ capture = PrintScreen
2/ capture = New Window
3/ capture = somehow to save selected row(s)
... kopik

Need help with EXIF date on raw images

I have just over 100 images (taken by 2nd shooter) that have the wrong EXIF date (JPEG and raw). They were taken with a 2nd camera that was off by +15hrs 57min.
There are many programs that will easily edit the EXIF date/time on the JPEGs, but they don't work with the raw images.
I've read that Lightroom can compensate for incorrect dates upon import, but after searching, I can't find any information on how to do it. Can someone please help?

I got EXIFTool working and solved my problem down to the exact second.
I was able to sync the times to within one second, based on one one particular event. One shot, taken with camera 1 was right before a handshake, while both people were extending hands, the other shot, with camera 2 (wrong EXIF date) was the actual handshake. I used this information to determine that camera 2 was 15hours 57minutes 18seconds fast.
Using EXIFTool GUI, I modified the date/time shift to decrement 15hours 57minutes 18seconds for all images from the second camera (both raw and JPEG). After this was complete, I checked the times, and the two frames (before and during the handshake) were only one second apart, and in correct sequence.
I imported the images from both cameras into Lightroom and had it rename the images based on time down to the second (YYYYMMDDHHMMSS-filename).
Now everything is great!

Crypto newb: Need help with encrypting data for offline Swing app

Hi all,
I'm VERY new to cryptography. Can somebody point me in the right direction? I've created a Swing application that is intended to be used offline (no network connections are established by the app). I need to export XML files from this application, to be transported via floppy to another instance of the application on a different computer for import. The information is sensitive and must be encrypted!
I started looking into AES and using asymmetric ciphers (public/private key encryption). But then I realized that if Jane is exporting a file for Bob to view, she won't have access to Bob's public key (no network access). Ugghh!
I noticed another solution in this forum where the person suggested using password encryption. It was an old post and I think it used DES. Anyway, password encryption doesn't seem too secure.
So, I thought I'd create a symmetic key (correct term?) once, store it in the program directory, and distribute it with the application installer. That way, everyone would have the same key and would be able to encrypt/decrypt each others files. Right? Err... I'm not sure.
Like I said, I'm a newb at crypto. If someone could suggest the best/most secure way to accomplish this, I would be eternally grateful.
PLEASE HELP!!! :-D
Thanks in advance.

Sorry, Grant. I must've posted that last one just
after your response. I was intending the message to
be for Anand. Heh - you have no idea how many times I've done the same thing. It's an artifact of the asynchronous nature of message boards.
Your response is very helpful. Out of
curiosity, does my last post provide any more insight
that would change your mind? Or do you still believe
that using password encryption and letting the user
choose/provide the password is the best solution?Well, as you noted, giving everyone two sets of keypairs is semantically equivalent to giving everyone a single symmetric key. And, as I've noted, it's completely INsecure - everyone who gets access to an install disk, either legitimately or no, can read every transmission your app makes forever after. Cryptographically speaking, this is Not A Good Thing.
The advantage of PBE is that it's easy for your users to exchange keys when their machines can't see each other. The real key here is that your app, if you really want it to be secure, MUST allow/require that transmission between Alice and Bob use a different key than that between Alice and Carlos or Bob and Carlos - otherwise, if Eve compromises any user of your software, ALL users are compromised.
I'd go with PBE, just because other alternatives are painful for your end users. You could use generated KeyPairs, for example, if you provide a means for users to exchange public keys. If you display Bob's public key in encoded, String-able form, then Bob can either email that to Alice or read it off to her over the phone. Into your app Alice loads/types in that public key, and the app now knows how to secure communications with Bob.
Public keys are large, though, and people screw them up typing them in. And many users have TERRIBLE key discipline - if Bob loses access to his private key, he can't read anything Alice sends. And if his private key is readable on some public shared folder (which happens with a totally-frightening regularity), then we're back to no security at all.
Use one of the triple-DES PBE Ciphers, and get on with making your app do what you really want it to do, would be my advice. (Free advice, of course, being worth every penny you pay!)
Once again, thanks a bunch!Glad to help.
Grant

NEED HELP with contact/data recovery from restore backup before current

My girlfriend synched her iphone 5 to itunes 6 months after purchasing it and wiped all of her data. Instead of clicking "restore backup", she chose "Backup now", which replaced the version we needed. Is there anyway of retrieving the data from that restore?

No, not unless she had a backup of the data she loss.

I need help with higrah date

hii, all
i would like to compare between this date
CREATE TABLE HR.TEST_CHECK_IN
(CHECK_IN DATE);
INSERT INTO DATE VALUES ('01/3/1433');
INSERT INTO DATE VALUES ('02/3/1433');
INSERT INTO DATE VALUES ('03/3/1433');today in hijrah date is 28/2/1433
when i write this code it's working fine
SELECT TO_DATE(CHECK_IN) ,(TO_CHAR(sysdate+1,'DD-MM-YYYY','nls_calendar=''arabic hijrah''')) HIJRAH
FROM   TEST_CHECK_IN
WHERE TO_DATE(CHECK_IN) >(TO_CHAR(sysdate+1,'DD-MM-YYYY','nls_calendar=''arabic hijrah'''))
RESULT
TO_DATE(CHECK_IN)         HIJRAH
01/03/33                  28-02-1433
02/03/33                  28-02-1433
03/03/33                  28-02-1433
when i use this code with oracle form builder 10 g he give me this error in run time
frm-40735 ora 01843
     IF TO_DATE(:ROOM_DETAILS.CHECK_IN)>(TO_CHAR(sysdate+1,'DD-MM-YYYY','nls_calendar=''arabic hijrah''')) THEN
          UPDATE ROOMS
          SET    WAITING = 'Y',
                 OCCUPIED= NULL
          WHERE ROOM_ID = :ROOM_DETAILS.ROOM_ID;
     END IF;
when i change my code to
SELECT TO_CHAR(CHECK_IN) ,(TO_CHAR(sysdate+1,'DD-MM-YYYY','nls_calendar=''arabic hijrah''')) HIJRAH
FROM   TEST_CHECK_IN
WHERE TO_CHAR(CHECK_IN) >(TO_CHAR(sysdate+1,'DD-MM-YYYY','nls_calendar=''arabic hijrah'''))
RESULT --> NULL
TO_CHAR(CHECK_IN) HIJRAH
----------------- ----------

And I would suggest that you use consistent datatypes in your tables when you test.
You have a test table that uses a DATE datatype:
CREATE TABLE HR.TEST_CHECK_IN
(CHECK_IN DATE);
INSERT INTO DATE VALUES ('01/3/1433');
INSERT INTO DATE VALUES ('02/3/1433');
INSERT INTO DATE VALUES ('03/3/1433');And a query that has ':ROOM_DETAILS.CHECK_IN' which may be a VARCHAR2.
Also you say you tried 849733's suggestion and used 'WHERE TO_DATE(CHECK_IN,'DD-MM-YYYY') ' and go no rows but this TO_DATE with a format string is the same as your original code so would have given the same three rows.

Need help with infinity data extencion kit

Similar Messages

Maybe you are looking for