Need help with internal HD memory problems when using Premiere Pro?
When using PP I keep loosing memory on my HD.
Now this seems strange to me since I have every thing, all my video and audio files on external HDs.
Each time I time I make a new project I end up with less space on my internal HD.
Information related to these projects is somehow remaining on my internal HD.
Anyone got any ideas about what I might be doing wrong?
Dimitrije
Premiere will slowly compile various files to help the project along, and the default place is usually your internal hard drive. Make sure your scratch disks are pointed to an external hard drive if that is what you want, also, make sure the Media Cache Files are being created on your external as well (and not the default location which is on your local drive).
Premiere Preferences > Media
Media Cache Files & Media Cache Database should be changed to an external disk if you don't want them created on your local disk. There are many tutorials and explanations about all of these aspects of Premiere on these forums and from other sources. Hope that helps!
Similar Messages
-
Need Help with "Not Enough Memory Error" when running executable (is my VI reworkable?)
When I started making this VI, I had no clue about proper VI flow, sub-VI usuage, and much more I'm sure.
The VI is a program that outputs a 0-5V digiatl signal to a relay board (to actuate an air cylinder) and monitors 4 input voltages (lets say from a pressure transducer) . The program would then shut down the corresponding output channel if a pressure threshold is not met.
Surprissingly for my first LV program, The VI functions "fine" (the quotes are because I know my programming flow is a mess and probably not efficient) unitl I reach a given cycle count or time elasped, at which time my VI blows up and I receive an error for "not enough memory to complete operatoin".
I am wondering if there is a simple DAQmx (or something else) command misplaced or missing that would solve this issue. When I started making this VI I had a poor top down design layout, or lack of one. I would like to believe I have learned a lot from making this program with no LV training and if I were to do it again I would utilize state machines and sub VI's more. However, with time not on my side and LV not a priority in my job I would like to know if this VI is reworkable..?
I should also mention that this program is being run as an executable on a laptop without the full LV development software. I dont know if the executable creation process could have left to this problem either...
Attached is LV version 10 and 11
Thanks for the help
Attachments:
LCT_DAQmx v11.0.vi 173 KB
LCT_DAQmx.vi 135 KBThere are some things you can probabaly do fairly easily. Four of the inner while loops appear to be very similar. You could probably make a subVI from one of them and reuse the code. Some of the shift registers are initialized and some are not. I suspect that this is an error, although I did not look closely enough to determine which way is intended. Read up on reentrancy. You may need that for the subVI.
The outer loop, if it is needed at all should be stopped by a front panel boolean, not by the Abort button. Someone on the Forums has suggested that using the Abort button to stop a VI is like using a tree to stop a car - it works but may have undesirable consequences!
Re-initializing the DAQ tasks and clearing them on each iteration is not very effficient, is slow, and may lead to problems.
The inner inner while loops (inside On Cycle and Off Cycle) are very similar, differing mostly in the data written. Perhaps you only need Idle and Run (with Data as a parameter). The inner inner loops might be combined with the outer loops with some change in the way the timing is handled.
You Dequeue in two places in each loop. There is no data dependency bewteen the two Dequeue functions, meaning that you cannot be sure which will execute first. Also, none of the Dequeues has a timeout set. They will wait forever if no data is available. Queues should not usually be read in more than one location to avoid loss of data or confusion about which data came first.
Lynn -
I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.
Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Memory problems when using alias channel strips (3.0.2)
I'm having memory issues when using alias channel strips. What is happening is I create one instance of the plugin, say Massive. Then make a bunch of other alias on different patches. When looking at the memory usage everytime I add and alais it increases the memory usage by an amount the same as the origional plugin. ie. add 3 alias and you have 3 times more memory usage. See attached photos.
Original plugin instance ~80mb memory usage
Adding 3 Alias channel strips. ~330mb memory usage
By comparison here is the usage by adding 3 brand new instance of the plugins. ~160mb memory usage
By comparison it is using less memory by having 4 seperate instances of the plugin compared to using 3 alias's of the origional. This doesn't make sense since the whole point of an alias is to save memory by only loading one instance of the plugin.
Anyone have any thoughts?
JonWhat's interesting is that if I, starting with a blank concert, add a Massive to a patch and then make an alias the memory is as you say. But if I make a duplicate of the inital patch and then make alias's of that the memory is lower.
Are you seeing the same with the built-in plug-ins? -
Need help with my iTunes on iPhone 5 and Macbook Pro
Need help with my iPhone 5 and my Macbook Pro. I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5. Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac. Can anyone help me with that ??....
You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.
-
My webcam turns on when using Premiere Pro CC. How do I make this stop?
Got a weird one here folks...
It seems as though my webcam (Logitech C110) is turning itself on whenever I am using Premiere Pro CC.
When any window within Premiere is selected the green light besides the lens turns on...when I click "out of" Premiere...it goes off.
I seriously doubt Adobe is pulling some NSA-esque reconnaissance here. Does anyone else have this "problem" and if so do you know a way to fix this?
Best,
AlexI believe this issue has been present since day one of signing up for CC. Anyone have a solution?
-
I need help with an Apple ID problem...
I own a Macbook and an iPod touch, I have downloaded numerous apps for the iPod over the years. 18 months ago my boyfriend got an iPhone 3GS and created an Apple ID but it would not let him download apps due to some kind of issue registering his bank card. At the time I tried to sort it out and told him to get in touch with Apple support but he was impatient and wanted to start getting apps right away so I caved in and let him use my Apple ID. The next day I realised this was a stupid thing to do when all his apps started appearing in my iTunes. However I didn't see it as too much of a problem at the time...
Tomorrow I am going to pick up my shiny new iPhone 5 (my first iPhone ) and I am worried about plugging it into my Mac and having all these apps that I really don't want around in my iTunes. I am imagining an absolute pain in the bum trying to sort all these apps out and syncing them to the right devices? I would absolutely love to just shift all his apps over to his Apple ID, he has loads of stuff that he needs to keep now. He does not have a computer himself, but there is no real need to plug his iPhone into my macbook ever again. After having a quick read around the forums, there seems to be no simple answer to this problem. If anyone could help with this I would be extremely grateful!DoubleSkin wrote:
I would absolutely love to just shift all his apps over to his Apple ID,
You can't. All apps are forever tied to the ID used to originally obtain them. In your case, that would be your ID. He really needs to get his own ID, delete these apps, then purchase them using his ID.
For you, just delete what you don't want from your iTunes library. -
I need help with a software update problem??
I recently got a new macbook pro and I was doing a software update last night as it was required but then when it started to do the update the computer installed the software and then a barring noise came from the mac and it tried to restart 4 times before it eventually came back on. The software trying to install was Fireware 800 I think. Can anyone help with this?
Try MacBook notebook forum to talk to other users, or OS Software (Lion or Snow Leopard)
Does not sound like an Apple OS update though.
http://support.apple.com/downloads/
https://discussions.apple.com/community/notebooks
http://www.apple.com/support/macbookpro -
Need help with new 3GS mail problems
I have a new 3GS v.4.1 about a week now, just getting around to setting up the mail. I synced through Itunes, checked the setting's. I can send email but not recieve. Can anyone help?
Any error message provided when the account is checked for new messages?
Under the Info tab for your iPhone sync preferences with iTunes, deselect Sync Mail Accounts followed by selecting Apply. Follow this by deleting and manually recreating the account on your iPhone. If this is successful, do not reselect Sync Mail Accounts under the Info tab for your iPhone sync preferences or you will be right back where you started. -
Need Help! PS CS3 have Error when using custom brushes.
Hello Everyone,
First, please forgive my bad english!
My prpblem is, that Photoshop CS3 (Part of Adobe Premium Suite 3, Design Premium package) always crash when I using the brushes.
I can use any other tool and it works great. But at the moment I use a brush for two three strokes Photoshop have an Error.
What I did. Delete all Brushes, save new Brushes, just use original Brushes. create new Brushes, that all didn't work. PS crashes also after I did all that stuff.
Hopefully somebody can help me, its very frustrated. Because Im a concept artist and I only need PS for painting. PS have this problem by the way
from beginn on I installed the Premium Suite on my iMac.
Thank's and kind regards from ZurichWhat are your performance preferences?
Is the Brush tip extremely large?
Boilerplate-text:
Are Photoshop and OS fully updated?
As with all unexplainable Photoshop-problems you might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed) by pressing command-alt-shift on starting the program or starting from a new user-account.
System Maintenance (repairing permissions, purging PRAM, running cron-scripts, cleaning caches, etc.) might also be beneficial, Onyx has been recommended for such tasks.
http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
Weeding out bad fonts never seems to be a bad idea, either. (Validate your fonts in Font Book and remove the bad ones.)
If 3rd party plug-ins are installed try disabling them to verify if one of those may be responsible for the problem. -
Performance problems when using Premiere Elements for photo slideshows
Hello,
I had been using Premiere Elements 9 (PE9) to make a simple slideshow for my parents from their vacation trip and I ran into some serious performance problems. I had used it to create similar projects before, but not nearly as big. This one is like 260 photos, so basically it is 260 seperate clips. I have a POWERHOUSE workstation (see below) so it isn't my PC. Even when PE9 crashes, looking at my performance monitor my CPU and RAM aren't even halfway being utilized. I finally switched to Windows Movie Maker of all things and it worked seemlessly, amazing really. I'm wondering if I was just using PE9 for something other than what it was designed for since there weren't really any video clips, just a ton of photos that I made into video clips, if that makes sense. Based upon my experience with this so far, I can't imagine using PE9 anymore for anything really. I might have the need for a more professional video editing program in the near future, although it does seem like PE has a lot of features. How can I make sure it utilizes my workstation to its full potential? Here are my specs:
PC
Intel Core i7-2600K 4.6 GHz Overclocked
ASUS P8P67 Deluxe Motherboard
AMD Firepro V8800 Video Card
Crucial 128 GB SATA 6Gb/s Solid State Drive (Operating System)
Corsair Vengeance 16GB (4x4GB) Memory
Corsair H60 Liquid CPU Cooler
Corsair Professional Series Gold AX850 Power Supply
Graphite Series 600T Mid-Tower Case
Western Digital Caviar Black 1 TB SATA III Hard Drive
Western Digital Caviar Black 2 TB SATA III Hard Drive
Western Digital Green 3 TB SATA III Hard Drive
Logitech Wireless Gaming Mouse G700
I don’t play any games but it’s a great productivity mouse with 13 customizable buttons
Wacom Intuos5 Pen Tablet
Yes, this system is blazingly fast. I have yet to feel it slow down, even with Photoshop, Lightroom, InDesign, Illustrator and numerous other apps running at the same time. HOWEVER, Premiere Elements 9 has crashed NUMERUOS times, every time my system wasn't even close to being fully taxed.
Monitors – All run on the ATI V8800
Dell Ultra Sharp 30 inch
Samsung 27 Inch
HAANS-G 28 Inch
Herman Miller Embody Ergonomic Chair (one of my favorite items)Andy,
There ARE some differences between PrE and PrPro w/ an approved CUDA-capable and MPE hardware acceleration-enabled nVidia video card, but those differences show up ONLY in the quality of the Scaling. The processing overhead is almost exactly the same, when it comes to handling the extra pixels.
As of PrPro CS 5, two things changed:
The max. size of Still Images went up from 4096 x 4096 pixels, to quite a bit larger (cannot recall the numbers now).
The Scaling algorithms have been improved, though ONLY with the correct nVidia cards, with MPE hardware support enabled.
Now, there CAN be another consideration, between the two programs, in that PrPro CS 5 - CS 6, are 64-bit ONLY, so one benefits from the computer and OS to run it. PrE can be either 32-bit, or 64-bit, so one might, or might not, be taking advantage of the 64-bit program and OS. Still, the processing overhead will be almost identical, it's just that the 64-bit OS can spread it around a bit.
I still recommend Scaling the large Still Images in PS, prior to Import, to keep that processing overhead as low as is possible. Scaled Still Images work just fine, and I have one Project with 3000+ Scaled Still Images, that edits just fine in PrPro, even on my older 32-bit workstation. Testing that same machine, and PrPro some years ago, I could ONLY work with up to 5 - 4096 x 4096 Stills, before things ground to a crawl.
Now, Adobe AfterEffects handles large Still Images differently, so I just moved that test Project to AE, and added another 20 large Images, which edited just fine. IIRC, AE can handle Still Images up to 10K x 10K pixels, and that might have gone up, as of CS 5.
Good luck, and hope that helps,
Hunt -
Need HELP with objects and classes problem (program compiles)
Alright guys, it is a homework problem but I have definitely put in the work. I believe I have everything right except for the toString method in my Line class. The program compiles and runs but I am not getting the right outcome and I am missing parts. I will post my problems after the code. I will post the assignment (sorry, its long) also. If anyone could help I would appreciate it. It is due on Monday so I am strapped for time.
Assignment:
-There are two ways to uniquely determine a line represented by the equation y=ax+b, where a is the slope and b is the yIntercept.
a)two diffrent points
b)a point and a slope
!!!write a program that consists of three classes:
1)Point class: all data MUST be private
a)MUST contain the following methods:
a1)public Point(double x, double y)
a2)public double x ()
a3public double y ()
a4)public String toString () : that returns the point in the format "(x,y)"
2)Line class: all data MUST be private
b)MUST contain the following methods:
b1)public Line (Point point1, Point point2)
b2)public Line (Point point1, double slope)
b3)public String toString() : that returns the a text description for the line is y=ax+b format
3)Point2Line class
c1)reads the coordinates of a point and a slope and displays the line equation
c2)reads the coordinates of another point (if the same points, prompt the user to change points) and displays the line equation
***I will worry about the user input later, right now I am using set coordinates
What is expected when the program is ran: example
please input x coordinate of the 1st point: 5
please input y coordinate of the 1st point: -4
please input slope: -2
the equation of the 1st line is: y = -2.0x+6.0
please input x coordinate of the 2nd point: 5
please input y coordinate of the 2nd point: -4
it needs to be a diffrent point from (5.0,-4.0)
please input x coordinate of the 2nd point: -1
please input y coordinate of the 2nd point: 2
the equation of the 2nd line is: y = -1.0x +1.0
CODE::
public class Point{
private double x = 0;
private double y = 0;
public Point(){
public Point(double x, double y){
this.x = x;
this.y = y;
public double getX(){
return x;
public double setX(){
return this.x;
public double getY(){
return y;
public double setY(){
return this.y;
public String toString(){
return "The point is " + this.x + ", " + this.y;
public class Line
private double x = 0;
private double y = 0;
private double m = 0;
private double x2 = 0;
private double y2 = 0;
public Line()
public Line (Point point1, Point point2)
this.x = point1.getX();
this.y = point1.getY();
this.x2 = point2.getX();
this.y2 = point2.getY();
this.m = slope(point1, point2);
public Line (Point point1, double slope)
this.x = point1.getX();
this.y = point1.getY();
public double slope(Point point1, Point point2)//finds slope
double m1 = (point1.getY() - point2.getY())/(point1.getX() - point2.getX());
return m1;
public String toString()
double temp = this.x- this.x2;
return this.y + " = " +temp + "" + "(" + this.m + ")" + " " + "+ " + this.y2;
//y-y1=m(x-x1)
public class Point2Line
public static void main(String[]args)
Point p = new Point(3, -3);
Point x = new Point(10, 7);
Line l = new Line(p, x);
System.out.println(l.toString());
}My problems:
I dont have the right outcome due to I don't know how to set up the toString in the Line class.
I don't know where to put if statements for if the points are the same and you need to prompt the user to put in a different 2nd point
I don't know where to put in if statements for the special cases such as if the line the user puts in is a horizontal or vertical line (such as x=4.7 or y=3.4)
Edited by: ta.barber on Apr 20, 2008 9:44 AM
Edited by: ta.barber on Apr 20, 2008 9:46 AM
Edited by: ta.barber on Apr 20, 2008 10:04 AMSorry guys, I was just trying to be thorough with the assignment. Its not that if the number is valid, its that you cannot put in the same coordinated twice.
public class Line
private double x = 0;
private double y = 0;
private double m = 0;
private double x2 = 0;
private double y2 = 0;
public Line()
public Line (Point point1, Point point2)
this.x = point1.getX();
this.y = point1.getY();
this.x2 = point2.getX();
this.y2 = point2.getY();
this.m = slope(point1, point2);
public Line (Point point1, double slope)
this.x = point1.getX();
this.y = point1.getY();
public double slope(Point point1, Point point2)//finds slope
double m1 = (point1.getY() - point2.getY())/(point1.getX() - point2.getX());
return m1;
public String toString()
double temp = this.x- this.x2;
return this.y + " = " +temp + "" + "(" + this.m + ")" + " " + "+ " + this.y2;
//y-y1=m(x-x1)
public class Point2Line
public static void main(String[]args)
Point p = new Point(3, -3);
Point x = new Point(10, 7);
Line l = new Line(p, x);
System.out.println(l.toString());
}The problem is in these lines of code.
public double slope(Point point1, Point point2) //if this method finds the slope than how would i use the the two coordinates plus "m1" to
double m1 = (point1.getY() - point2.getY())/(point1.getX() - point2.getX());
return m1;
public String toString()
double temp = this.x- this.x2;
return this.y + " = " +temp + "" + "(" + this.m + ")" + " " + "+ " + this.y2;
//y-y1=m(x-x1)
}if slope method finds the slope than how would i use the the two coordinates + "m1" to create a the line in toString? -
Need help with cd/dvd drive problem.
I have a MacBook (black) running OS 10.6.8. The internal cd/dvd drive no longer works. I put in a disk and it gets pushed back out after a few seconds.
I just bought a LG Ultra Slim Portable DVD Writer model GP 60NB50. The MacBook recognizes the LG drive for opening music and movies, and for burning photos to a disk.
I have been unable to use the LG drive as a start-up drive. I put Disk Warrior into the drive and restarted the computer holding down the “C” key. When the computer starts to launch there is a flash of a “?” on the screen then it loads from the hard disk. I also tried using the Apple start up disk that came with the computer but that also failed.
Any idea how I can get the LG drive to become a start-up drive when needed?
Thanks,
OrinIf your computer is a TouchSmart, and I am only guessing that it is, this document might help.
Good luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01496336&tmp_task=solveCategory&lc=en&dlc=en&cc...
GeorgeFN
I work on behalf of HP. -
Need help with a SpryImageSlideShow load problem
I am using Dreamweaver CS5.
I have a spryImageSlideshow on my site. I can't get the slideshow to load if there are only 2 images or less in the slideshow. It only automatically loads the large image when there are 3 photos or more in the slideshow. How do I fix this to start with only 1-2 photos in the slideshow?Hi
We usually need to see ALL your code to solve your issue quickly and accurately without a lot of guessing and questions back-and-forth.
Just rename a copy of your problem page (such as "test.html") and upload it to your server, in whatever folder the original page was located, and simply post a link in the Forum and tell us your problem.
This saves you having to cut and paste miles of code into the Forum for the page and all the dependent CSS, JS etc. files.and saves us from having to recreate all your filles, find your images and then repair your code and test the solution for you.
I trust this is helpful. -
Need help with a very strange problem
I've been using Macs since the Apple IIe and I haven't seen anything like this. I need some help "diagnosing" where the problem might lie, and what to do about it.
I have the dock to appear and disappear automatically. But when I run the mouse down to the bottom of the screen, it doesn't appear. I have to "click" in that area to get it to appear. Also, when I select a menu in the finder or in an application, and then scroll through the menu items, they do not highlight as they should. I can click on an item to activate it, but they aren't highlighted as I scroll through.
Also, in some applications, windows don't appear and disappear normally as they should. For example, with Adobe Lightroom I have it set up so that the adjustment panels on the left and right automatically appear and disappear. But they aren't doing that anymore.
A restart and permissions repair will temporarily solve the problem, but it inevitably returns (sometimes within an hour, sometimes a few days). I have three users on my computer, and it happens in each user account.
A couple days ago, I did an archive & install. That didn't fix it. Then yesterday I did a full reinstall of Leopard and then used Migration Assistant and Time Machine to migrate my users & applications to the new install. After I repaired permissions and rebooted, the problem was right there again.
It doesn't seem like the problem is with a user account, since all three accounts have it. So why didn't a reinstall of the system fix it? And what can I do now?Althought the behavior is the same in all three accounts, if all are working accounts I would suspect there is something all of them have installed that could be the source of the problem. Try creating a new admin account, and leave it just the way Apple creates it--don't add anything nor modify it in any way. Log into that account and see if it works correctly.
If that account is also misbehaving, try restarting, and when you hear the chime hold down the Shift key so that you boot into Safe Mode (you'll see a notice in the splash screen about being in Safe Mode). The boot will take longer (perhaps even considerably longer) as the system runs disk repair, empties some caches, disables all third party startup items, as well as all Apple startup items not strictly necessary for the machine to run. See the menus and Dock now behave correctly.
Since the problem is evidently somewhat intermittent in nature it may take some patience to discover what is wrong. You might also disconnect everything that didn't come with the Mac, reboot, and use only the Apple keyboard and Apple mouse and run for a bit to see how that works. If you are using a third party mouse that required installing something that would be my guess as a "prime suspect" for the cause of the problems.
Francine
Francine
Schwieder
Maybe you are looking for
-
Can boot system, / is ro (SOLVED)
I'm new, read a lot on the wiki's but am a t a loss. I'd luckerly done a full back up from a few days ago with the rsync backup so am up and running, but would like to know what I did wrong with the origional partition and fix it if possibe, otherwis
-
Spot chanel white not visible in ai when psd file is placed (CS6)
TIA for the help. Hopefully somebody here can point me in the right direction. My appologies if this was covered already, but I've searched left and right without any luck. We use spot channels in PS and as of CS5 have to print out of Illustrator in
-
Namespace is not shwon correctly
Hi all, I have a scenario RFC -> XI Webservice. Where the request structure of the We service contains elements from the two different namespaces as shown below: I have created the a namespace ns1 and the corresponding data types in it. And then i cr
-
Outlook 2011 calendar sync with my i-phone
I cannot synchronise my outlook 2011 calendar for mac with my I-Phone...Before work good with I-cal or entourage but now doesn't work anymore ?
-
So I just got this,was told good for playing games,I use my fb lot n play the games there. So I have not figured out how to ply my games,says does not support adobe flash....can someone plz help?????? Ty