Need help with IOS 4 update
I've tried 3 times to update my Iphone and I usually just get tired of waiting and give up. The box that says "Backing up Iphone" only gets 2/3 of the way through. I can't figure out what to do to make it finish. I never get any farther than this. Please help!
Do you have a lot of photos on your phone? If so, import them & delete same from your camera roll. Next, delete your existing backup(it may be corrupted): Under preferences(under the edit menu if using windows), Devices, delete your existing backup. Try again. Make sure your internet connection is good & disable or turn off ALL anti-virus & firewalls.
Similar Messages
-
NEED HELP WITH IOS 6 UPDATE!!! PLEASE.
I have an 8GB iPhone. The iOS 6 update says that I need 2.4GB available to update. I deleted all of my apps, 200 pictures out of 400 plus videos. It says only 5.1GB are used but it won't let me update the iOS 6. Help me please?
jayfram wrote:
I am having the exact same problem. Can't upgrade via the phone, even with a wifi connection - says I need 2.4 gb of storage, although the software is only 500 mb. I'm not about to delete everything on my phone just to update the OS.
So plug the phone into the computer that it normally syncs with and update via iTunes. -
I need help with IOS 7, there is a major bug that needs to be fixed in an upcoming Update
There is a big that needs to be FIXED an in upcoming update.
Ok, on my ipad, the notifacation center says the weather is going to be 13 degrees celceuis, I am wanting to use the American metric units, which is Fahrenheit, how do I fix it, it says yahoo provides weather info! I taped on it, it led me to the internet, it said on yahoos website that it is 88 degrees Fahrenheit, but it won't show up on my ipad notifaction center, how do I fix it?? Need help
I have already done a hard reset, I also did location service off and then back on, the problems persist, some one told me that a third party weather app was changing the weather to celceuis, this is NOT true, need help how do I fix this?
I have IPAD 3 gen, IOS 7Apple will never see your post here
They do not monitor these posts for problems
You really should post at
http://www.apple.com/feedback/iphone.html
http://www.apple.com/feedback/ipod.html
http://www.apple.com/feedback/ipodtouch.html
http://www.apple.com/feedback/ipad.html
Allan -
Need help with IOS commands to see wireless printer
Seems that I'm not asking the question correctly, or providing the right information.
The problem:
I've purchased a wireless printer, (an HP 6500a) and I can not see / ping / use the printer on the wireless network.
Environment:
Cisco 891 ISR in standalone. Single office - Home-office environment. Nothing spectacular. WLAN connected and operational to the internet.
The printer is configured to use a static IP of 10.0.0.3 and reports that it is connected to the AP. However, when I ping FROM the command line at the AP, I DO NOT see the printer. (I did previously, but we lost power last night due to a storm and I'm still trying to reconfigure it...) DHCP is configured on the router to exclude the range 10.0.0.1 through 10.0.0.99
How do I configure the wireless router to allow any connected client to share files / printers etc? Seems that the Cisco router has this shut off
by default and I've found nothing in the user manual or by asking for help on here how to reverse this so that I can share printers / files on the LAN.
Please, I'm not stupid, but I'm only casually familiar with IOS and Cisco's networking terms.
Thanks in advance,
-Mike
=============== Begin Wiresless AP config (running-config) ==============
Current configuration : 3122 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname (Remnoved)
enable secret 5 (Removed)
no aaa new-model
dot11 syslog
dot11 ssid (Removed)
vlan 1
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii 0 (Removed)
username (removed)
username (Removed)
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers tkip
broadcast-key vlan 1 change 30
ssid (Removed)
antenna gain 0
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 1 mode ciphers tkip
broadcast-key vlan 1 change 30
ssid (Removed)
antenna gain 0
dfs band 3 block
channel dfs
station-role root
interface Dot11Radio1.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
access-list 110 permit icmp any any echo
access-list 110 permit icmp any any echo-reply
access-list 110 permit icmp any any source-quench
access-list 110 permit icmp any any packet-too-big
access-list 110 permit icmp any any time-exceeded
bridge 1 route ip
banner login ^CC
% Password change notice.
Default username/password setup on AP is cisco/cisco with privilege level 15.
It is strongly suggested that you create a new username with privilege level
15 using the following command for console security.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to
use. After you change your username/password you can turn off this message
by configuring "no banner login" and "no banner exec" in privileged mode.
^C
line con 0
privilege level 15
login local
no activation-character
line vty 0 4
login local
cns dhcp
endWireless clients can get on w/o issue. Nobody can ping anyone else or see them.
No file sharing, no printer.
Tried using the web-based config which works for some items, but wont access the advanced config.
I'm on my way into town, so can't post the router config, but it is posted in my earlier question
of last week. I can login later if you otherwise need it here.
Thanks,
-Mike -
Windows 8.1 need help with Windows Updates and Start menu Or fix my old Windows Xp system
My beloved windows Xp has gave up after many years of working well. It stopped working a few days ago after a lightening strike.
I got this Windows 8.1 computer a few month ago but it seems to have a problem. I stopped using it after could not get start menu to work and when back to my Windows XP system.
First problem is the start menu is not there. I tried installing something and it says it will take control or something and screen goes black. I clicked canceled quickly in order not to get a virus.
Where is the start menu?
Second problem, Windows updates does not want to update because it needs Windows 8.1 update. This computer is already Windows 8.1. There I canceled it since it was mostly a virus. Now updates are not working.
If those can not be fixed, how can i fix my Windows Xp to get it back. It does not turn on, I press button and nothing happens. Is this something easy to fix?Another user discovers that Windows 8.1 is not at all of what it should be.
There is no Start Menu in Windows 8 or 8.1. However, you can restore your desktop start menu with a very good freeware application:
Classic Shell
Windows Update comes with Windows 8.1. There is nothing special you have to do.
It kind of sounds like you've been a bit too quick to download and run whatever you find on the Internet. You should always research any software you're considering downloading/installing ahead of time. Google it. See what others say
about it. Ask on forums. In order to use Windows effectively and safely you need to expand your knowledge and become a more sophisticated user.
If you think your new system has become infected, you might want to consider Refreshing or Resetting it to a clean state, or at least visiting one of the anti-malware forums and getting some advice on cleaning it up. But beware, a lot
of "blind leading the blind" happens on forums. Always try to read between the lines, and question what people say.
You could consider leaving XP behind. Its time has come and gone, and pretty much any newer version of Windows can actually give you better service than XP - once you get it tuned up.
It's possible to make Windows 8.1 more functional than XP and about as functional as Windows 7, but it takes a fair bit of effort in reconfiguration and installation of some well-known 3rd party applications that are good (which, unfortunately, most
on the internet are not).
Good luck to you.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options -
Need help with understanding updates, partitions, firmware etc.
I went to update my QuickTime and in doing so was told to update my OS which included QT updates. Now I'm getting all kinds of messages about partitions, firmware etc. do not understand at all what's going on.
THIS IS MY STEP BY STEP situation with my updates:
I go to the Apple Icon and selected Software Update and it reads I have 2 items:
MacBook EFI Firmware Update 1.2
MacBook SMC Firmware Update 1.4
I select Install and then it state Installs completed successfully.
BUT THEN I recieve and new icon and this message below:
To update the SMC firmware on your MacBook:
Your computer's power cord must be connected and plugged into a working power source, or your battery must be at least 25% charged.
For more information see 'http://support.apple.com/kb/TS3499'.
1. Quit all other open applications.
2. Click Restart in the MacBook SMC Firmware Update window and wait for your computer to restart.
The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.
Important: Do not interrupt the update.
Your computer restarts automatically when the update is completed and opens the MacBook SMC Firmware Update.
3. Click OK. The SMC firmware is now up-to-date.
If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.
I follow the instructions and then I get this: (could get my image to attach but here's what it said)
the first error message heading of:
MacBook SMC Firmware Update 1.4
Your firmware could not be updated, the hard drive partition scheme may not be supported. You must be booted from a GUID partition or RAID scheme.
see http://support.apple.com/kb/HT2434 for more information (internal error 28:3)
THEN ANOTHER ONE POPS UP saying:
Your Hard Drive partition scheme is not supported, you must be booted from a GUID partition scheme.
see http://docs.info.apple.com/article.html? artnum=303609 for more information
I went to those URL and tried to understand what it was telling me but I did not understand. I can't figure, by reading thru forums, etc, if I need to do this or not and what exactly it is.
So back to just pushing a simplet update has thrown all this unknown info. my way and I have no clue what to do.
Thank you. Hope this is more clear. -
I need help with application updates
My problem is with applications updateing i changed my e-mail address but my old one still is listed and i can't update new applications how can i change that ID
no iam refering to the application icon shows six updates and i touch it and it shows my old e-mail address which is [email protected]
-
my ipod touch wont update to ios 5 it says that there was an error rate before its done updating
What was the specific error you recieved? The following gives the resolution for the common errors:
http://support.apple.com/kb/TS3694 -
Help! I have a Used Mac Book Pro need help with apps update
My ex bought me a mac book pro and purchased all of the apps and uploaded the apps under is apple id. I just recently update the new software now i can't get access to iPhoto, and other apps because its asking me for my password but his apple id coming up is there any way i re install these apps under my apple id. Please help I can used iPhoto.
You cannot use or upgrade anything that is registered with his Apple ID. You must re-purchase it all using your Apple ID and your iTunes account. This includes the operating system as well. Essentially, you erase the drive and start from scratch. Here's how to get started:
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. You can decide which apps you want to purchase (or download free) from the App Store where you will set up your own account and your own Apple ID if you don't have one. -
I upgraded to CS5 recently. I started getting no
tices there were updates available. When I got to the update
page and clicked on update, I got a message that said 'another
instance of updater is running, please try again later". This has
happened each time I tried to run the updates. It has been going
on for days. I am at a loss as to what this means and how I go about
getting the updates. Any suggestions? I am not a computer or photoshop
whiz, so I need basic help.That did it - thanks for your help
Jim R -
I recently downloaded the iPod updater for my iPod Nano, but everytime i try to open it, it doesnt come up. I tried downloading the iPod updater a second time, but still the same results. I click on it, and the little hour glass shows up as if its about to open but then it just goes away and the app doesnt open. If someone can help me with this problem it would be greatly appreciated.
Just out of curiosity, did you download the correct version of the updater - i.e., the Windows version versus the Mac version? Just had to ask.
Dennis -
So I'll cut it short. Downloaded a new OS. I installed a new OS. Wiped my OS. Deleted Vendor.xml Launched Loader.exe Went through the proccesses. The only problem is its just sitting doing nothing. I dont know if it is. But it looks as if its stuck on 'Connecting to Boot ROM' Its not doing anything. Its been 10-15mins already. Please help
Hmmm...here are some more things to try...I hope you already have a good backup, if not, consider this thread:
http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Backup-the-data-on-your-Blac...
After that, these may be useful:
Sometimes, it just takes a long time...how long is "long enough" is a tough guess, though...I've heard of folks (extreme cases) waiting as long as 24 hours
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
www.bbsak.org
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Need help with Spotify updates!
Recently, Spotify hasn't worked properly. You see, whenever I start Spotify I get a noticfication that says that the latest version of Spotify is available and I can download it just by restarting Spotify. But if i restart Spotify, it doesn't start. It just turns of automatically and then I am not able to open Spotify in anyway I can think of. So then i have to reinstall Spotify, and when I do that Spotify works correctly but i still get the same notification as earlier. So that means that when I reinstall Spotfiy I don't get the latest version which is weird because in the help section on Spotify.com it says that if I reinstall Spotify I get the latest version. If I choose not to update Spotify, the next time I start my computer or turn off Spotify I'm not able to start Spotify and I need to reinstall Spotify again and the same problem starts from the beginning. I had the same problem eariler and got help and solved this issue but now I'm experiencing the same thing again. I keep having this issue every time there is a new update on Spotify! Please help me, I don't know what to do! Ps: I have Windows
Since you mention ActiveX I can assume that you are on Windows.
Download the Reader Update from http://www.adobe.com/support/downloads/detail.jsp?ftpID=5637
For Flash Player you need to download and run the full installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers) -
have a package that was sequenced for w7 64 bit;
now need to publish this package to RDS 2012.
edited the package in sequencer and added RDS2012 R2.
The question:
do I have to unpublish current package that is for W7 only and publish edited one with added RDS 2012 or can I update running with changed. Never did update yet. So please don't be angry :)
"When you hit a wrong note it's the next note that makes it good or bad". Miles DavisIf you just changed the supported OS value (checkbox during sequencing), just saving the package on the sequencer and importing it into the management console should be fine.
The MgtConsole will determine that you are importing an updated version and will ask you if you want to import it 'as an update'. You can confirm that.
On a client machine, the old version of the package will remain (for a while) and the new version will be added. Users that actively work with the old version, stick on that on. Users that launch the application will get the new version.
If your two 'packages' really have technical differnces, the 'save as new package' is appropriate with the considerations mentioned earlier
Falko
Twitter
@kirk_tn | Blog
kirxblog | Web
kirx.org | Fireside
appvbook.com -
Need help with ios 8 icloud issue
I just updated to iOS 8 and want to utilize family sharing with my kids. Previously I had to logon to their devices with my own apple ID in order to share content. I want to give them their own ID's and utilize the "authorize to buy" option, but when I created and signed into my daughter's phone with her new apple ID, iCloud keeps my ID and password associated with the device and allows her to approve her own purchases. How do I disassociate her icloud with my account and input hers on her phone without a full factory reset? I have already signed out of the itunes and app store on the phone and signed back in as her. I have done the same for imessage and facetime, yet under icloud it still shows my account and will not allow me to make changes there.
Where did you sign her new Apple ID on? Did you delete your iCloud account? Settings>iCloud, scroll down to the bottom of the screen and tap on Sign Out. Type in your password when asked, and follow the prompts to delete the account. Then sign on with her Apple/iCloud ID.
Cheers,
GB
Maybe you are looking for
-
in the previous version of Number, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?
-
Camera extras doesn't work on 16:9 camera format o...
Hi everybody, I already installed Camera Extras app on my Lumia 800, but when I try to use one of its features the camera format switch automatically to 4:3 format..... Is anybody who knows about this bug ? Thanks,
-
Convert picture imported to Word document with VBA
I've Word documents that contain acronyms and a macro that searches the document for them so that they can be identified for an acronym table. So far, I can search a document's text and tables but not the pictures with the macro. I've found that if I
-
Prevent JVM from exit on Windows with an Atl-F4
The "Alt-F4" key combination can be used to kill my Java program. Would anyone know of a way to prevent this? Since this only needs to be stopped on Windows and the application does bundle the "JRE" with it (we therefore control which version of Java
-
HT201263 how to go back i normal mode when i''m i recovery
how to go back i normal mode when i''m i recovery