NEED HELP WITH IOS 6 UPDATE!!! PLEASE.
I have an 8GB iPhone. The iOS 6 update says that I need 2.4GB available to update. I deleted all of my apps, 200 pictures out of 400 plus videos. It says only 5.1GB are used but it won't let me update the iOS 6. Help me please?
jayfram wrote:
I am having the exact same problem. Can't upgrade via the phone, even with a wifi connection - says I need 2.4 gb of storage, although the software is only 500 mb. I'm not about to delete everything on my phone just to update the OS.
So plug the phone into the computer that it normally syncs with and update via iTunes.
Similar Messages
-
HT4623 need help with my update please
started my update and all of the sudden phone is telling me to conect to the itunes and wants me to restore my phone. im not home or dont want to have all my pictures erased since im traveling for last two weeks and right now in greece. how to get around this problem please help
At the top of this page click the iTunes Tab. You can update iTunes from there.
-
I would need help with saving some eamil messages to a disk to unclutter my email. How can I do this please?
Thanks.
ElisabethOpen the email and then from the File menu select Save As Rich Text Format. That'll save it to open in TextEdit. If you want a pdf then open the email and do command-p (Print) and then from the PDF drop down box lower left corner select Save as PDF.
-
Need help with Portal Themes -- Please help
I need help with Portal Themes. I have read every document I can find but I am having no luck. All I want to do is change the colors for the Exceptions on one of my queries. I have created my own Portal Theme where I have changed the colors but I do not know how to assign my newly-created Portal Theme to my query. Can someone please give me the detailed steps on how to do this? Please help because this is driving me crazy.
Thanks.
RyanHi,
Refer
Exceptions - How to change the colors
This may help.
Thanks,
JituK -
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
I need help with IOS 7, there is a major bug that needs to be fixed in an upcoming Update
There is a big that needs to be FIXED an in upcoming update.
Ok, on my ipad, the notifacation center says the weather is going to be 13 degrees celceuis, I am wanting to use the American metric units, which is Fahrenheit, how do I fix it, it says yahoo provides weather info! I taped on it, it led me to the internet, it said on yahoos website that it is 88 degrees Fahrenheit, but it won't show up on my ipad notifaction center, how do I fix it?? Need help
I have already done a hard reset, I also did location service off and then back on, the problems persist, some one told me that a third party weather app was changing the weather to celceuis, this is NOT true, need help how do I fix this?
I have IPAD 3 gen, IOS 7Apple will never see your post here
They do not monitor these posts for problems
You really should post at
http://www.apple.com/feedback/iphone.html
http://www.apple.com/feedback/ipod.html
http://www.apple.com/feedback/ipodtouch.html
http://www.apple.com/feedback/ipad.html
Allan -
Need help with IOS commands to see wireless printer
Seems that I'm not asking the question correctly, or providing the right information.
The problem:
I've purchased a wireless printer, (an HP 6500a) and I can not see / ping / use the printer on the wireless network.
Environment:
Cisco 891 ISR in standalone. Single office - Home-office environment. Nothing spectacular. WLAN connected and operational to the internet.
The printer is configured to use a static IP of 10.0.0.3 and reports that it is connected to the AP. However, when I ping FROM the command line at the AP, I DO NOT see the printer. (I did previously, but we lost power last night due to a storm and I'm still trying to reconfigure it...) DHCP is configured on the router to exclude the range 10.0.0.1 through 10.0.0.99
How do I configure the wireless router to allow any connected client to share files / printers etc? Seems that the Cisco router has this shut off
by default and I've found nothing in the user manual or by asking for help on here how to reverse this so that I can share printers / files on the LAN.
Please, I'm not stupid, but I'm only casually familiar with IOS and Cisco's networking terms.
Thanks in advance,
-Mike
=============== Begin Wiresless AP config (running-config) ==============
Current configuration : 3122 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname (Remnoved)
enable secret 5 (Removed)
no aaa new-model
dot11 syslog
dot11 ssid (Removed)
vlan 1
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii 0 (Removed)
username (removed)
username (Removed)
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers tkip
broadcast-key vlan 1 change 30
ssid (Removed)
antenna gain 0
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 1 mode ciphers tkip
broadcast-key vlan 1 change 30
ssid (Removed)
antenna gain 0
dfs band 3 block
channel dfs
station-role root
interface Dot11Radio1.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
access-list 110 permit icmp any any echo
access-list 110 permit icmp any any echo-reply
access-list 110 permit icmp any any source-quench
access-list 110 permit icmp any any packet-too-big
access-list 110 permit icmp any any time-exceeded
bridge 1 route ip
banner login ^CC
% Password change notice.
Default username/password setup on AP is cisco/cisco with privilege level 15.
It is strongly suggested that you create a new username with privilege level
15 using the following command for console security.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to
use. After you change your username/password you can turn off this message
by configuring "no banner login" and "no banner exec" in privileged mode.
^C
line con 0
privilege level 15
login local
no activation-character
line vty 0 4
login local
cns dhcp
endWireless clients can get on w/o issue. Nobody can ping anyone else or see them.
No file sharing, no printer.
Tried using the web-based config which works for some items, but wont access the advanced config.
I'm on my way into town, so can't post the router config, but it is posted in my earlier question
of last week. I can login later if you otherwise need it here.
Thanks,
-Mike -
Windows 8.1 need help with Windows Updates and Start menu Or fix my old Windows Xp system
My beloved windows Xp has gave up after many years of working well. It stopped working a few days ago after a lightening strike.
I got this Windows 8.1 computer a few month ago but it seems to have a problem. I stopped using it after could not get start menu to work and when back to my Windows XP system.
First problem is the start menu is not there. I tried installing something and it says it will take control or something and screen goes black. I clicked canceled quickly in order not to get a virus.
Where is the start menu?
Second problem, Windows updates does not want to update because it needs Windows 8.1 update. This computer is already Windows 8.1. There I canceled it since it was mostly a virus. Now updates are not working.
If those can not be fixed, how can i fix my Windows Xp to get it back. It does not turn on, I press button and nothing happens. Is this something easy to fix?Another user discovers that Windows 8.1 is not at all of what it should be.
There is no Start Menu in Windows 8 or 8.1. However, you can restore your desktop start menu with a very good freeware application:
Classic Shell
Windows Update comes with Windows 8.1. There is nothing special you have to do.
It kind of sounds like you've been a bit too quick to download and run whatever you find on the Internet. You should always research any software you're considering downloading/installing ahead of time. Google it. See what others say
about it. Ask on forums. In order to use Windows effectively and safely you need to expand your knowledge and become a more sophisticated user.
If you think your new system has become infected, you might want to consider Refreshing or Resetting it to a clean state, or at least visiting one of the anti-malware forums and getting some advice on cleaning it up. But beware, a lot
of "blind leading the blind" happens on forums. Always try to read between the lines, and question what people say.
You could consider leaving XP behind. Its time has come and gone, and pretty much any newer version of Windows can actually give you better service than XP - once you get it tuned up.
It's possible to make Windows 8.1 more functional than XP and about as functional as Windows 7, but it takes a fair bit of effort in reconfiguration and installation of some well-known 3rd party applications that are good (which, unfortunately, most
on the internet are not).
Good luck to you.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options -
Need help with understanding updates, partitions, firmware etc.
I went to update my QuickTime and in doing so was told to update my OS which included QT updates. Now I'm getting all kinds of messages about partitions, firmware etc. do not understand at all what's going on.
THIS IS MY STEP BY STEP situation with my updates:
I go to the Apple Icon and selected Software Update and it reads I have 2 items:
MacBook EFI Firmware Update 1.2
MacBook SMC Firmware Update 1.4
I select Install and then it state Installs completed successfully.
BUT THEN I recieve and new icon and this message below:
To update the SMC firmware on your MacBook:
Your computer's power cord must be connected and plugged into a working power source, or your battery must be at least 25% charged.
For more information see 'http://support.apple.com/kb/TS3499'.
1. Quit all other open applications.
2. Click Restart in the MacBook SMC Firmware Update window and wait for your computer to restart.
The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.
Important: Do not interrupt the update.
Your computer restarts automatically when the update is completed and opens the MacBook SMC Firmware Update.
3. Click OK. The SMC firmware is now up-to-date.
If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.
I follow the instructions and then I get this: (could get my image to attach but here's what it said)
the first error message heading of:
MacBook SMC Firmware Update 1.4
Your firmware could not be updated, the hard drive partition scheme may not be supported. You must be booted from a GUID partition or RAID scheme.
see http://support.apple.com/kb/HT2434 for more information (internal error 28:3)
THEN ANOTHER ONE POPS UP saying:
Your Hard Drive partition scheme is not supported, you must be booted from a GUID partition scheme.
see http://docs.info.apple.com/article.html? artnum=303609 for more information
I went to those URL and tried to understand what it was telling me but I did not understand. I can't figure, by reading thru forums, etc, if I need to do this or not and what exactly it is.
So back to just pushing a simplet update has thrown all this unknown info. my way and I have no clue what to do.
Thank you. Hope this is more clear. -
Need help with case structures- please help :)
Hey all.
I'm currently trying to program a infrared furnace. I'm setting a temperature, subtracted my set temperature from the actual temperature (thermocouple hooked up to SCB-68), and voltage is being sent to the controller of the furnace accordingly. However, I need to hold the set temperature for a certain amount of time. I need help programming this: when the VI reads the set temperature from the thermocouple, it results in a timer running down. When the timer runs down to 0, the While Loop ends. I'm thinking case structures is most appropriate, but if you have a better suggestion, please let me know.
ThanksYou should probably implement a state machine.
The state machine would keep track of the temperature and making ajustments on a timely basis.
There is a template of a state machine is you select under the File menu > New > From Template.
You can also look under Help > Find Example > and do a search for state machine.
There are lots of state machine examples on this forum, some of which may be quite useful.
RayR -
With iOS 7 how does one shut down the apps when done with them? Used to hit the home button twice then hold finger on icons until the minus sign appeared then tap them and voila...... Doesn't appear to work that way now.
Double tap the home button and swipe upwards on the preview of the App (not the App Icon).
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf -
I need help with application updates
My problem is with applications updateing i changed my e-mail address but my old one still is listed and i can't update new applications how can i change that ID
no iam refering to the application icon shows six updates and i touch it and it shows my old e-mail address which is [email protected]
-
I've tried 3 times to update my Iphone and I usually just get tired of waiting and give up. The box that says "Backing up Iphone" only gets 2/3 of the way through. I can't figure out what to do to make it finish. I never get any farther than this. Please help!
Do you have a lot of photos on your phone? If so, import them & delete same from your camera roll. Next, delete your existing backup(it may be corrupted): Under preferences(under the edit menu if using windows), Devices, delete your existing backup. Try again. Make sure your internet connection is good & disable or turn off ALL anti-virus & firewalls.
-
my ipod touch wont update to ios 5 it says that there was an error rate before its done updating
What was the specific error you recieved? The following gives the resolution for the common errors:
http://support.apple.com/kb/TS3694 -
I need help with my setup Please !!! 2800+ athlon xp
hi all .......... great forum here.....!!!
I am having probs with my new setup and I am at a wits end of what to do so i'll explain my problem.
I have just bought a AMD athlon 2800+ cpu for my mobo (KT3 ultra 6830e v.1.0)
and I am unable to run the chip at correct speed??
The bios wont boot the computer if I try to set the fsb for cpu at 166 ?? Am I correct in thinking that a 2800+ Athlon needs to be run at 166fsb to get the 333fsb setting?
I am currently running it at 133fsb and it is registering it as a AMD 2200+ chip ???
I am quite new to playing about with my bios but at the moment it is set at defaults on everything because i had to reset the cmos jumper about 8 times last night after trying different settings, in the end i gave up and thought i'd ask u guys for help???? Please !!!
I spoke to the shop i bought the chip from and we got talking about that when i set the fsb for chip to 166 it changed the ram settings to host clock + 66 (host clock was set at 100mhz) thus trying to make my 2100 ram(266) run at 2700(333) specs ?
Is this the problem why my computer wont boot when it is set to 166 fsb cuz it is asking the ram to be 333ddr when it isn't???
Is my problem going to be solved if i purchase some 2700 ram ?? if so i'll be quite happy, or is my board just not capable of running this 2800+ cpu on it???
i read up b4 i bought the cpu and i thought i was able to run this chip maybe i read wrong? any help would be greatly appreciated , oh i also flashed my bios to the most recent msi update which was 5.7 i think (AMI bios) and the flash was succesfull (LOL) very worrying!!!!
anyway hope i have explained my problem well enough as i myself am very confused!!!!
Thanks in advance
Davei have just had a look around the net and it looks like there are two versions of the 2600+ available one with 133/266fsb support and the other with 333fsb ???
Do u know that if i take my 2800+ back to the shop and change it for a 2600+ cpu if i should just get a normal one(133/266fsb) or get the 333fsb version???
as that link u posted for the mobo supported cpus only lists the 2600+ as being a 133/266fsb chip ???
I will get some 333ddr ram as well just incase i need this to allow the 2600+ to run correctly
Also (sorry to be a pain) but can you explain to me how to change the multipliers correctly to get full power from the chip ?? as i read that a 2600+ comes out at 1.91ghz standard , but i was reading a review where the user was told by AMD that it will run higher by changing fsb or multipliers (or both?) ???
Do u have to set the fsb to 133 and then change the multiplier to a value to up the speed or just keep changing the fsb alone and leave the multipliers alone ????
Hope you can help me......
Thanks once again for your replys..
Dave
Maybe you are looking for
-
When you choose to export your sequence, the name of the file you are about to save is of course taking the name of the sequence. But sometimes the last or two last letters disappears and you get i.e. Bea#166B99B at the end. Let's say in this case th
-
Hi guys I am using doc types KR and KN for downpayment. if i use doc type KR, i can clear the downpayment with no problem - however if i use doc type KN, i cannot. Can anyone suggest what i need to do to fix this? I am using F-47 for downpayment and
-
Changing default page margins for Web Intelligence
Is it possible to change the default page margins for new Web Intelligence documents. The default size is 76px which most people find exceedingly large. The defaultconfig.xml file can be modified to specify default fonts, page size, orientation, etc
-
Hi I saw an article a week or two ago about a cool example of having a hover over icon which when clicked showed some detail info in another cell somewhere on the page. I read it and though "Hmm, thats nice" and forgot about it but now I have the nee
-
MIGO change header data before saving
Hi all, I want to update header data (budat) before saving the material document with MIGO. Has anybody an idea? I tried with Badi: mb_document_badi or similar user-exit MB_CF001 but with none of these I can CHANGE header data. Is it possible? Thanks