Need help with iPlanet App Server Install

We have the Fast Track edition installed as webserver on an NT box. We
have also loaded the Test Drive edition application server and we are
trying to verify its installation. I have the IP and port number and
then put in the /ias-samples/index.html and keep getting message Invalid
URL.
Checked for the directory existance and it is there. Does it need to be
mapped somehow?
What are we missing?
Thanks In Advance ~

Hi Tom,
I don't know what is Fast Track edition of web server. Would you give
the
webserver name and version number (such as iWS 4.1 service pack6). It
may be the case that iAS does not support the iWS. Check if the web
server is running fine by typing only the ip address. No port number is
neccessary for NT. You can try with no port number.
<machine name>.<domain name>/ias-samples/index.html
regds
iAS devsupport
visiontechdesigns wrote:
>
We have the Fast Track edition installed as webserver on an NT box. We
have also loaded the Test Drive edition application server and we are
trying to verify its installation. I have the IP and port number and
then put in the /ias-samples/index.html and keep getting message Invalid
URL.
Checked for the directory existance and it is there. Does it need to be
mapped somehow?
What are we missing?
Thanks In Advance ~

Similar Messages

  • Newbie needs help with Flex app

    Hi there. I am very new to Flex and also fairly new to
    programming although I do have a little experience.
    I am trying to create an app which stores code snippets or
    common text I tend to use every day in my documents and emails.
    So basically I need help on a design level. I can refer to
    the developer's manual for exact instructions for commands, but I
    need to know what to code first.
    The app will consist of:
    -a tree directory structure where I can create groups.
    -There will be a basic text editor where I input all my data,
    basic text formatting options (font, bullets etc) would be a bonus.
    -A search function
    -Finally it will ideally allow multiple client apps write to
    a central database file over a network
    Can anyone suggest how I should approach such a project?
    Or are there any tutorials / source files which demonstrate
    each bullet point?
    thanks.

    Hey jono,
    I'm new too. But I think I might know the right components.
    If you google any of these + flex 3 you should get some
    decent documentation
    tree - advanced dataGrid component
    basic text editor - rich text editor component
    search function - well, you're gonna need to read up on
    arrays, and arraycollection. Once you get that stuff working, you
    can write up a function to search for a string in an array.
    network functionality - HTTPService, you can dump the
    datagrid into a database, and have it load the database when you
    open up the application.
    Give these things a shot, tutorials / sources will come with
    the google searches.

  • Need help with Flash media server

    I am using XAMPP. Now i want to intall Flash media server. How can i configure my apache server to work with flash media server? I dont want to install the apache server coming along with flash media

    Hi,
    What excactly is the usecase you are trying here? Are using your external Apache to proxy your http traffic from FMS to it or do you want to use http streaming feature of FMS?
    If you want to proxy it then use the following document : http://help.adobe.com/en_US/FlashMediaServer/3.5_AdminGuide/WSE2A5A7B9-E118-496f-92F9-E295 038DB7DB.html
    Refer Configure HTTP proxying topic in the document.

  • Need help with backup and clean install

    Need Assistance with G5
    Background
    I'm an inexperienced Mac user with a G5, twin 2.0 gig processors and 1.5
    gig ram. The OS is v10.3.6. It is the latest OS that will not slow down
    internet (Safari/Mail) applications. Anything newer has really slowed internet applications down big time.
    Current Problem
    I've probably messed up my hard drive by switching back and forth
    (archive/install) from newer to present OS. I now have corrupted data and
    while my Mac is useable, several things do not work (disk utility, printing
    and possibly more). I have a mixture of new and older versions of
    these applications/utilities in my OS.
    Going Forward
    I believe I need to wipe out my hard drive and do a clean install. I also have a Mac mini which I can use (I believe) for backup via firewire.
    Backup
    Is everything I need to backup in the "User" folder? My spouse and I have
    separate accounts and a shared account on the same Mac, with a total of 8.5 gig of data, mostly photo's and music. We want to save that and the usual preferences and favorites/bookmarks/addresses/email, etc. It would be nice if all I had to do was drag the user folder into the target drive.
    I'd appreciate any assistance. I have more questions which I'll get to later, but I need to start somewhere.
    Thanks all
    Mac G5    

    Backing up your Users folder will save everything in all the accounts on the computer including pictures, music, preferences, etc. as long as they were kept in that folder.
    If you have File Vault turned on you should turn it off. The "correct" procedure for transferring to your Mac Mini is as follows:
    1. Turn both computers off. Connect them together with a Firewire cable.
    2. Boot the G5 into Target Disk Mode.
    3. Then boot the Mac Mini normally. The G5's hard drive should be present on the Mini's Desktop.
    4. Create a new folder on the Mini and name it something appropriate like G5 User Backup. Drag the Users folder on the G5 into this new folder on the Mini.
    After the transfer completes you should verify that everything has been transferred and is there in the folder.
    5. Drag the G5's hard drive icon from the Desktop to the Trash or CTRL-click on its icon and select Eject from the contextual menu.
    6. Shutdown the G5 and remove the Firewire cable connecting the two computers.
    You can now proceed to fix the G5. Because you are planning to erase the hard drive I would like to suggest you do an extended format to prep the hard drive properly for your restoration:
    1. Boot from your Panther Installer Disk. After the installer loads select Disk Utility from the Installer menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    You can then quit Disk Utility and return to the installer. Now proceed to reinstall OS X. Be sure you set up your accounts with the exact same usernames and passwords as you used before.
    Once you have completed your reinstallation on the G5 you can restore your Users folder from the Mac Mini.
    1. Shut down both computers. Connect them with a Firewire cable.
    2. Boot the G5 into Target Disk Mode.
    3. Boot the Mac Mini normally. G5's hard drive should appear on the Mini's Desktop.
    4. Open a Finder window on the G5's hard drive and drag the Users folder to the Trash (don't delete yet.)
    5. Now copy the saved Users folder from the Mac Mini to the G5 (only the Users folder, not the folder in which you stored it.)
    6. Eject the G5's hard drive from the Mini's Desktop and shut down the G5.
    7. Disconnect the Firewire cable.
    Now restart the G5. If all worked well it should start up normally and you should find everything normal in your accounts.
    There is one potential problem in all the above. All your account preferences are contained in the Users folder. If you have any corrupted preferences, they will still be corrupted and may continue to cause problems. If that's the case you may need to trash the /Home/Library/Preferences/ folder's contents. Hopefully, this won't be the case, but you should be aware of the possibility.
    If eveything is working normally you can empty the Trash and delete the contents. Same on the Mac Mini.

  • I need help with downloading apps?

    I got an iPad 2 today and I entered all my details in and also my bank details in, but then it's saying to me to enter 'security code' in? And I don't know what it is. I have realised that a lot of people are having this problem and it obviously needs to be sorted? Please help me?????

    Thanks for your responses but when I go on app store and then on featured, I press 'free app' and then it says 'install app' and then I click on 'use existing apple id' - so then I enter my username and password, then all my bank details ans everything else, there all correct but then it comes up with... 'your payment method was declined, please enter another payment method' - all I want is FREE apps, no paid ones? Is there anyway I could get around this? - I have noticed a lot of people are having this problem HELPPPPP lol x

  • Need help with BB Internet Server/Upgrades for 8530

    Looking for APPS&Software to download BBInternet Server,RIM BBSLA for the latest version of UPGRADES! My BB8530 Lost my original BBEnterprise Server when I did the upgrades , Now have no INTERNET BROWSER!!!! HELP PLEASE!Need my WEB BROWSER BACK! Everything was working GREAT before I did the UPGRADES SPRINT&BLACKBERRY kept texting & emailing me to do!! Wish I had not done them,now! How do I go back to original?Can't tell anything got better,just messed up my Browser!!!!HELP !

    Firstly, this is a self-help forum for ordinary BB owners to find and provide answers. We aint paid AND WE DONT EXPECT TO BE SHOUTED AT
    As with all forums, you cant expect everyone to be logged-in all the time. Some have more time than others and the majority only visit because they have a problem.
    That said, I'll have a look see if I can help.
    Blackberry Best Advice - Back-up weekly
    If I have helped you please check the "Kudos" star on the right >>>>

  • Need help with Java app for user input 5 numbers, remove dups, etc.

    I'm new to Java (only a few weeks under my belt) and struggling with an application. The project is to write an app that inputs 5 numbers between 10 and 100, not allowing duplicates, and displaying each correct number entered, using the smallest possible array to solve the problem. Output example:
    Please enter a number: 45
    Number stored.
    45
    Please enter a number: 54
    Number stored.
    45 54
    Please enter a number: 33
    Number stored.
    45 54 33
    etc.
    I've been working on this project for days, re-read the book chapter multiple times (unfortunately, the book doesn't have this type of problem as an example to steer you in the relatively general direction) and am proud that I've gotten this far. My problems are 1) I can only get one item number to input rather than a running list of the 5 values, 2) I can't figure out how to check for duplicate numbers. Any help is appreciated.
    My code is as follows:
    import java.util.Scanner; // program uses class Scanner
    public class Array
         public static void main( String args[] )
          // create Scanner to obtain input from command window
              Scanner input = new Scanner( System.in);
          // declare variables
             int array[] = new int[ 5 ]; // declare array named array
             int inputNumbers = 0; // numbers entered
          while( inputNumbers < array.length )
              // prompt for user to input a number
                System.out.print( "Please enter a number: " );
                      int numberInput = input.nextInt();
              // validate the input
                 if (numberInput >=10 && numberInput <=100)
                       System.out.println("Number stored.");
                     else
                       System.out.println("Invalid number.  Please enter a number within range.");
              // checks to see if this number already exists
                    boolean number = false;
              // display array values
              for ( int counter = 0; counter < array.length; counter++ )
                 array[ counter ] = numberInput;
              // display array values
                 System.out.printf( "%d\n", array[ inputNumbers ] );
                   // increment number of entered numbers
                inputNumbers++;
    } // end close Array

    Yikes, there is a much better way to go about this that is probably within what you have already learned, but since you are a student and this is how you started, let's just concentrate on fixing what you got.
    First, as already noted by another poster, your formatting is really bad. Formatting is really important because it makes the code much more readable for you and anyone who comes along to help you or use your code. And I second that posters comment that brackets should always be used, especially for beginner programmers. Unfortunately beginner programmers often get stuck thinking that less lines of code equals better program, this is not true; even though better programmers often use far less lines of code.
                             // validate the input
       if (numberInput >=10 && numberInput <=100)
              System.out.println("Number stored.");
      else
                   System.out.println("Invalid number.  Please enter a number within range."); Note the above as you have it.
                         // validate the input
                         if (numberInput >=10 && numberInput <=100)
                              System.out.println("Number stored.");
                         else
                              System.out.println("Invalid number.  Please enter a number within range."); Note how much more readable just correct indentation makes.
                         // validate the input
                         if (numberInput >=10 && numberInput <=100) {
                              System.out.println("Number stored.");
                         else {
                              System.out.println("Invalid number.  Please enter a number within range.");
                         } Note how it should be coded for a beginner coder.
    Now that it is readable, exam your code and think about what you are doing here. Do you really want to print "Number Stored" before you checked to ensure it is not a dupe? That could lead to some really confused and frustrated users, and since the main user of your program will be your teacher, that could be unhealthy for your GPA.
    Since I am not here to do your homework for you, I will just give you some advice, you only need one if statement to do this correctly, you must drop the else and fix the if. I tell you this, because as a former educator i know the first thing running through beginners minds in this situation is to just make the if statement empty, but this is a big no no and even if you do trick it into working your teacher will not be fooled nor impressed and again your GPA will suffer.
    As for the rest, you do need a for loop inside your while loop, but not where or how you have it. Inside the while loop the for loop should be used for checking for dupes, not for overwriting every entry in the array as you currently have it set up to do. And certainly not for printing every element of the array each time a new element is added as your comments lead me to suspect you were trying to do, that would get real annoying really fast again resulting in abuse of your GPA. Printing the array should be in its own for loop after the while loop, or even better in its own method.
    As for how to check for dupes, well, you obviously at least somewhat understand loops and if statements, thus you have all the tools needed, so where is the problem?
    JSG

  • Need help with Camera app

    Hello RIM support,
    I am a new owner of BB Playbook.  Everything seems to be working okay except camera app.  I can take a picture with it but nothing will show up in picture app.  According to the help video, the pictures taken by camera app should show up in picture app from the menu option.
    Please help.
    Thanks
    Kevin
    Solved!
    Go to Solution.

    Yes, your pictures taken with the Playbook camera certainly should show in the Pictures folder on the Playbook.
    Just for the heck of it, can you try turning your Playbook off and back on and check your Pictures app/folder again?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Need help with master colection cs6 install

    short is that I got a trial of master colection cs6- from the adobe website--it installed ok ish but said it couldn't install help files, or DW widgets- I also noticed photoshop was missing. Went back through told the installer this time to only install dream weaver and photoshop. It bombs after 5% with:
    Exit Code: 11
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW037 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s), 0 warning(s)
    ERROR: DW037: Setup is already Running.
    I don't see any such process at all- this is a pisser- this primarily for school work.
    Help needed quick-asap- etc.

    I would start at the beginning.  Reboot your system to stop any installers from running, then use this removal tool to uninstall all installed components: http://www.adobe.com/support/contact/cscleanertool.html
    Then run setup again.

  • Need help with Edge/Origin server configurations

    I've been trying now for few days to configure an Edge server that would connect to our working Origin server.
    I have not changed anything on the Origin server and media are served properly
    I can easily play all media from the videoPlayer.html sample app distributed with the server.
    http://10.0.9.19:8134/samples/videoPlayer/videoplayer.html
    using the media;
    rtmp://10.0.9.19/vod/stories/Test/test
    Now I have installed a fresh version of FMS on a second machine and configured the Edge server as follow;
            <Proxy>
                    <Mode>remote</Mode>
                    <RequestTimeout>5</RequestTimeout>
                    <Anonymous>false</Anonymous>
                    <CacheDir enabled="true" useAppName="true">
                            <Path>c:\fmscache\</Path>
                            <MaxSize>32</MaxSize>
                    </CacheDir>
                    <LocalAddress></LocalAddress>
                    <RouteTable protocol="">
                            <RouteEntry>*:*;10.0.9.19:*</RouteEntry>
                    </RouteTable>
                    <EdgeAutoDiscovery>
                            <Enabled>false</Enabled>
                            <AllowOverride>true</AllowOverride>
                            <WaitTime>5000</WaitTime>
                    </EdgeAutoDiscovery>
                    <AggregateMessages enabled="true">
                    </AggregateMessages>
            </Proxy>
    Now if I try to connect to rtmp://10.0.9.20/vod/stories/Test/test i simply get an error saying that it cannot connect to the network...
    I also tried rtmp://10.0.9.20/?rtmp://10.0.9.19/vod/stories/Test/test
    That is using the videoPlayer.html sample and/or our app.
    What I am doing wrong?

    Ok, it seem that I just found something;
    If I launch the browser on the same machine as the edge and use "localhost" instead of IP it works.
    So
    http://localhost:8134/samples/videoPlayer/videoplayer.html?source=rtmp://localhost/vod/sto ries/Test/test
    works while
    http://localhost:8134/samples/videoPlayer/videoplayer.html?source=rtmp://10.0.9.19/vod/sto ries/Test/test
    don't!
    So there must be a config I am missing to tell the Edge to listen on ALL IP...
    ok, that is all good if the browser is ran from the same machine as the Edge server but still not working if the browser is launched from my desktop
    Message was edited by: André Couture

  • Need help with updating Name Server update for home webserver

    I set up a webserver at home to run my own domain/website. I am able to type my IP address into Safari/IE and get to my website fine. I now need to update the NameServer with the previous domain hosting service, but I have no idea how to find out the NameServer (Compast is my ISP) to put into the UPDATE NAME SERVERS form for the previous hosting company. I need to obviosly do this before people who type in my web address can be directed to my home server instead of the old hsoting company. The previous hosting server is ns.teammediaonline and ns1.teammediaonline.com. Do I use something like ns.comcast.net or something? I already have the IP address and know it works fine. Comcast does notchange the IP's too often and I will not have much traffic to my site, so I should not have any issues with them. I am sure this is a very simple issue. Any help would be greatly appreciated.

    Hi--
    You definitely do not want to contact Comcast. Servers are forbidden to their residential customers. If you contacted them, not only would they refuse to help, that might put you on a list to watch in case you do set one up. Now, if you're careful, don't server out a lot of traffic, and aren't a general nuisance to the people on your node, they most likely won't notice if you don't contact them.
    However, you'll need to look into a different DNS solution. Do a search for "Dynamic DNS" and you'll find a number of services that will be able to help you out. This one, DynDNS, has some reading material that might help to explain what you need to do...
    charlie

  • Need help with downloading apps

    Hi I'm trying to upload some apps from creative cloud and it keeps saying that it has been downloaded already but won't show up on my application folder. I installed a trial version but deleted perhaps it things that it been installed already. Any help would be amazing.
    thanks!

    Hi student-panda,
    Please run Creative Cloud Cleaner tool and then launch CC Desktop apps. it should fix the issue.
    http://www.adobe.com/support/contact/cscleanertool.html
    regards,
    Abhijit

  • I need help with an app game purchase

    I recently added 20$ to my account with 2 10$ Itunes cards. I play the app called clash of clans, in the game you can buy things with itunes, I tried to make a purchase for 19.99 when there is just about 21 $ in my itunes and it's telling me I have insufficient funds. This is odd becusee a couple days ago I did the same thing with the itunes card but now I'm getting this error. I checked my itunes again and I have the money, please help!

    What country are you in ? If you are in the US then does your state's sales tax take it over what you have on your account ?

  • Need help with MS SQL server JDBC driver

    Anyone has experience getting ACS working with SQL2005? We keep getting ‘com.adobe.adept.persist.DatabaseException: java.sql.SQLException: No suitable driver’
    We’re using sqljdbc.jar and sqljdbc4.jar that downloaded from Microsoft website. We added this to every library folder under tomcat, JRE and SDK but it did not help. Any suggestion will be helpful.
    Thanks-

    Hi,
    We have ACS with SQL Server 2005 Std correctly working.
    We have this settings:
    ############ SQL Server Connection ############
    com.adobe.adept.persist.sql.driverClass=com.microsoft.sqlserver.jdbc.SQLServerDriver
    com.adobe.adept.persist.sql.connection=jdbc:sqlserver://ip-addressSQL:PortSQL;databaseName =Adept
    com.adobe.adept.persist.sql.dialect=microsoft
    com.adobe.adept.persist.sql.user=userSQL
    com.adobe.adept.persist.sql.password=passSQL
    Wi use Microsoft SQL Server JDBC Driver 3.0 downloaded from Microsoft website (http://www.microsoft.com/download/en/details.aspx?id=21599)
    Good luck,

  • Need help with an AU instrument install w/Key File

    hey guys, i have a problem. i bought a new AU called Filterbank3 from Tone2. It uses a "Key File" which i have but i don't know where to "put" it. i don't think i have ever purchased and AU that has one. most are serial number type you know, when you open the plugin for the first time the screen pops up you type in the number and you are good to go. i have downloaded the plugin and it shows up in the availible list but when i try to open it it says "key file missing copy (the key file) to Library/audio units/plug ins. i have the key file as sent to me by the publisher and have done this but it doesn't seem to work. i really need some "hand holding" with this one. could anyone give me a walk through of what i should do? thanx-gospel

    Yeah Sampleconstruct thats the FIRST thing i did. The plug-in is there and i put the keyfile in as well. Maybe i wasn't really clear in earlier posts the problem i am having is with the Key File copy protection. In addition to the plug in Componenet File there is a .cfg file (which i don't know what that is) and the t2k. file (which is the key file). I have put all of them in the what i think is the correct place. Since it ran off an installer it is in Program HD/Library/Audio/Plug-Ins and thats where i put the .cfg and t2k.files. I tried to create a sub folder for just Filterbank in the Components folder and put all the stuff in there but it didn't help. i even tried to set up Application Support Folder in Program HD/Library/Application Supportfor FilterBank this did not help either. I do not know what to do the keyfile at all. maybe Tone2 will get back to me. but as always any help from true Mac heads is appreciated.-gos
    (to clarify i have 2 HDs one for programs and one for recording, also i have two plugin folders one manual one under users and one general where installers put stuff, i try not to move the individual plug-ins around )

Maybe you are looking for