Need help with iPod Gen2. No Sound will come out

SO i was playing the ocarina thingy.. when i finished i closed the app and put my iPod into sleep mode.. but about a half hour later.. i picked it up and noticed no sound was emitting...but it would work when I had my ear buds in?? any help would be appreciated

hi there. you seem to be really smart with ipod touches and i have the same problem this thread started with. only i used to have sound without headphones. i recently updated to 3.1.2 and had no trouble. i synchronized it to my computer to add music and the music went away. was there a new update i wasnt aware of? or did my ipod break? i have the 2nd gen with the rounded silver sides. i cant listen to the sounds from an app unless i have headphones in. wats going on? please email me back at "[email protected]" and thank you.
ps. i might forgot to check this thred or not be able to find it agian. :/

Similar Messages

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

Does anyone know when the iPod touch 6 generation will come out. And can anyone presume what kind if features it will have

Does anyone know when the iPod touch 6 generation will come out. And can anyone presume what kind if features it will have

nope & nope
Only Apple knows and they aren't telling anyone.

I just want to know when the new ipod touch 5th generation will come out

i just want to know when the new ipod touch 5th generation will come out

Apple has not announced any new iPod models. When they do, we'll all find out at the same time, I would guess, since the announcement will be prominent on every Apple-related web site and will probalby be posted in multiple threads in these forums.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base before you post a question.
Regards.

Hey please read need help with ipod

how do I set my playlist so if i hook up my ipod it only downloads my songs but if anyone else hooks up there ipod there songs won't come into my playlist? PLEASE HELP
Message was edited by: Alissa-55

first of all, i'm not sure if i understand your question fully but i believe you just want your OWN playlist so that you can put the songs YOU want on it and no one ELSE can put their music in it?
if that's the case, you just need to make your own playlist on your ipod.
open up itunes and near the top, select "file".
select "new playlist".
this new playlist should appear on the left-hand side of itunes under 'playlists' right at the bottom. when it appears, it will read 'untitled playlist'. click it once then again, so that you are able to name the playlist to your liking.
when it comes to putting songs into your own playlist, you can drag any song from your itunes library. choose a song from your itunes library and drag it over to your designated playlist til you see your playlist is outlined with blue and your cursor has a plus sign just below it.
hope that helps.

Need help with ipod video/movies

need help have videos in itunes how do i get them to ipod?

Double post. Please see your other one.
http://discussions.apple.com/message.jspa?messageID=3504698#3504698

Need help with first applescript@Quicktime- can't figure out a few lines...

Ok guys I need help, here is what I want to happen. I want the script to just shorten a movie file. It should be so simple!!
lengthofmovie = film length
set time range from 0 to (lengthofmovie-1)
save the movie as a new file
That is all I want done, I am ripping my hair out of my head trying to do this. Please help me!!
Here is my code so far:
with timeout of 86400 seconds
display dialog "Before beginning batch processing, make sure QuickTime Player is set to the desired export settings, and all videos to be processed are in a folder named ‘Input’ on the desktop." with icon note
tell application "Finder"
set the startup_disk to the name of the startup disk
end tell
set user to do shell script "whoami"
set inputfoldername to "Input"
set input_folder to startup_disk & ":Users:" & user & ":Desktop:" & inputfoldername & ":"
set user_desktop to startup_disk & ":Users:" & user & ":Desktop:"
set output_folder to startup_disk & ":Users:" & user & ":Desktop:Output:"
set file_extension to "_export.mp4"
try
tell application "Finder"
make new folder at user_desktop with properties {name:"Output"}
end tell
end try
try
set thefolderlist to list folder input_folder without invisibles
repeat with x from 1 to count of thefolderlist
set the_file to input_folder & item x of thefolderlist
set output_file to output_folder & item x of thefolderlist & file_extension
tell application "QuickTime Player"
activate
open the_file
//change timeline, trim NEED HELP HERE
export front document to output_file as MPEG4 using most recent settings with replacing
close front document
end tell
end repeat
on error
display dialog "This script requires a folder named ‘" & inputfoldername & "‘ located on the desktop." with icon stop
end try
beep
end timeout

Hi plashd,
First, I must confess that I don't know much about QuickTime. Nevertheless, while trying to understand your problem, I discovered that the AppleScript dictionaries of QuickTime Player and QuickTime 7 were very different from one another, and was unable to use the “export” command of QuickTime Player. However, I finally was able, with the following script, to use AppleScript to shorten a QuickTime movie and save it under another name:
*set the_file to POSIX file "/Users/pierre/Desktop/MVI_0503.MOV"*
*set output_file to "/Users/pierre/Desktop/NewMVI0503.MOV"*
*tell application "QuickTime Player"*
activate
*open the_file*
*tell front document*
*trim from 1 to (duration - 5)*
*save in output_file with replacing*
*close without saving*
*end tell*
*end tell*
Hope it can help.

Need help with my Facetime. The Audio cuts out when I open the app, only on my Macbook though.

I've noticed this problem since I upgraded to Yosemite. My Facetime app does not work. Either I will connect someone and I will constantly hear the ringing of a facetime call even after the call has been answered, or my speakers will cut out and we won't be able to hear each other.
Can anyone help me out?

First take the steps described in the comment of texasgrape1 in this discussion. If there's no change, see below.
Open the Sound preference pane and select the Input tab. Make sure the microphone you're trying to use is selected and that there's a response on the volume meter when you speak into it. If any other sound input devices are shown in the device list, what are they?

[SOLVED] Sound will come out of the speakers, but not the headphones.

So, the headphones won't play any sound (they work with my phone, not on my laptop) when plugged in.
When the headphones are plugged into the jack, the speakers mute, so I know that the laptop is registering that they got plugged in, but still no sound comes out.
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 2: VT1708S Alt Analog [VT1708S Alt Analog]
Subdevices: 1/1
And:
amixer -c 0 contents
numid=21,iface=CARD,name='Headphone Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=18,iface=CARD,name='Internal Mic Phantom Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=19,iface=CARD,name='Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=20,iface=CARD,name='Speaker Phantom Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=17,iface=MIXER,name='Master Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=16,iface=MIXER,name='Master Playback Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=42,step=0
: values=33
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=4,iface=MIXER,name='Headphone Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=3,iface=MIXER,name='Headphone Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=42,step=0
: values=42,42
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=26,iface=MIXER,name='PCM Playback Volume'
; type=INTEGER,access=rw---RW-,values=2,min=0,max=255,step=0
: values=255,255
| dBscale-min=-51.00dB,step=0.20dB,mute=0
numid=15,iface=MIXER,name='Mic Boost Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=3,step=0
: values=0,0
| dBscale-min=0.00dB,step=10.25dB,mute=0
numid=10,iface=MIXER,name='Mic Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=9,iface=MIXER,name='Mic Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=18,18
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=13,iface=MIXER,name='Capture Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=12,iface=MIXER,name='Capture Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=15,15
| dBscale-min=-16.50dB,step=1.50dB,mute=0
numid=6,iface=MIXER,name='Loopback Mixing'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'Disabled'
; Item #1 'Enabled'
: values=1
numid=11,iface=MIXER,name='Auto-Mute Mode'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'Disabled'
; Item #1 'Enabled'
: values=1
numid=22,iface=MIXER,name='Dynamic Power-Control'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'Disabled'
; Item #1 'Enabled'
: values=0
numid=5,iface=MIXER,name='Independent HP'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'Disabled'
; Item #1 'Enabled'
: values=1
numid=14,iface=MIXER,name='Internal Mic Boost Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=3,step=0
: values=2,2
| dBscale-min=0.00dB,step=10.25dB,mute=0
numid=8,iface=MIXER,name='Internal Mic Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=7,iface=MIXER,name='Internal Mic Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=23,23
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=2,iface=MIXER,name='Speaker Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=1,iface=MIXER,name='Speaker Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=42,step=0
: values=0,0
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=24,iface=PCM,name='Capture Channel Map'
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=0,0
| | chmap-fixed=FL,FR
numid=23,iface=PCM,name='Playback Channel Map'
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=3,4
| | chmap-fixed=FL,FR
numid=25,iface=PCM,name='Playback Channel Map',device=2
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=0,0
| | chmap-fixed=FL,FR
Anything else I need to show?
Last edited by Ave6 (2013-08-29 07:28:09)

rufus wrote:well you could post your alsamixer but before you do screw around with it turn all volumes up and such unmute everything
usually its the easiest damn thing maybe an F key needs tweaking....good luck!
Like this?
┌──────────────────────────────────────────────────── AlsaMixer v1.0.27.2 ────────────────────────────────────────────────────┐
│ Card: HDA Intel F1: Help │
│ Chip: VIA VT1708S F2: System information │
│ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
│ Item: Mic Boost [dB gain: 10.25, 10.25] Esc: Exit │
│ │
│ │
│ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │
│ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │ │ │ │ │
│ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │ │ │ │ │
│ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │ │ │
│ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │ │ │
│ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │ │ │
│ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ ├──┤ ├──┤ ├──┤ └──┘ ├──┤ └──┘ Disabled Enabled Enabled ├──┤ └──┘ Enabled │
│ │OO│ │OO│ │OO│ │OO│ │MM│ │
│ └──┘ └──┘ └──┘ └──┘ └──┘ │
│ 56 100<>100 100<>100 100<>100 37<>37 21<>21 87<>87 53<>53 │
│ Master Headphone Speaker PCM Mic <Mic Boost>Auto-Mute Dynamic P Independe Internal Internal Loopback │
│ │
│ │
└─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
Auto-Mute didn't really help...
Also, according to some post I saw online somewhere I added this to the default.pa in /etc/pulse/:
# Take Independent HP into use.
load-module module-alsa-sink device=hw:0,1

No sound will come out of the right headphone, but they work on my other devices..is this a common problem for the classic?

Two headphones are now in limbo due to a strange curse my iPod Classic 160Gb seems to hae. Affter a couple of weeks, sound will cease to emit form the right headphone unless i jiggle the plugs cable around. Funny thing is, my headphones work fine on other devices..Is this a common problem?

I tried to update my driver and it works fine now, I appreciate looking through this forum and finding answers for problems that I am having.

NEED HELP WITH IPOD 4TH GEN

I have an ipod touch 4th generation I forgot my password. Every time I try to restore it, it seems as tho its going to work but then comes up with some thing saying THAT I NEED MY PASSWORD. I have no idea what else to do. PLEASE HELP!!

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Need help with Ipod/FM transmitter use in Europe !!!

HELP! I need to know if I can use my ipod and my Griffin FM Transmitter to listen to tunes and charge the player with a car in Europe (Germany, Italy, etc.)
HP Windows XP

It appears that FM transmitters have been passed for use recently by Germany, Switzerland and Iceland. When or if the UK or any other European countries will allow them I don't know. This is a link to an announcement by Belkin on the subject: http://www.belkin.com/pressroom/releases/uploads/030906FMTranEurope.html

Need help with ipod & itunes

Hey everyone.
I just got a ipod video and i went to my friends house and put a whole bunch of songs on it. Well i want those songs on my ipod video onto my itunes on my home computer but i cant seem to get them on without over writting the songs on my ipod video with the songs on my itunes already, which i dont want to happen because i dont want to loose any of the songs on my ipod video. Someone please help me.

1) go back to your friends house and put all the song files you want into a folder on his computer.
2) plug in your ipod to his computer and enable disk use.
3) then open it up from "my computer", you'll see a few folders like "notes", "contacts" etc.
4) drag and drop the folder you created with all the song files. Don't put this in one of the ipod's pre-made folders.
5) go home, open your ipod again from disk use and select the folder you made with all the song files. drag and drop this anywhere you want in your computer (I suggest putting it with where you store more music)
Lastly you need to import these songs, open itunes and select File>Add Folder to Library. you will then select the folder of music from your friends house, wherever you dropped it.
After you have added the songs to your library you are free to delete ONLY the folder you created in your iPod (with the music files from your friend).
Hope this helps

Need Help with iPod Version

I want to put Linux in my iPod but I need to "unUpdate" it to v 1.0 (its updated to 1.2 right now). I tried alot of stuff but never works...
I got the 20gb iPod photo (the generation just before Video iPod)
When I use "restore", my iPod stay at V1.2
Could someone help me please?
Is there any way to unUpdate an iPod?
Thanks for your help.

See you can have an older version iPod updater here
http://www.ipodwizard.net/showthread.php?t=7369
By the way, I suggest you do not put Linux on you iPod, as you will loss the warranty immediately. Also when your iPod get into trouble, it is not easy to revert back

NEED HELP WITH IPOD

Hello all!! Need some help here. When I plug my ipod into the computer...my Ipod no longer shows up in the "source" window on itunes. A "do not disconnect screen" will flash on my Ipod for hours on end.
I have already reset my Ipod. Dont know what to do next.
Thanks friends!

How to I go through the warranty service process.
If you purchased from a non Apple store recently (~ a few weeks), I'd take it back and get another.
You can take it to an Apple retail store or request service here -> iPod Service Request
I mean i know you can request service, but you have to pay for that.
If it is within 180 days of purchase, you do not have to pay for anything. If it is after 180 days but before the one year warranty is up, it's ~$29 for shipping.

Need help with iPod Gen2. No Sound will come out

Similar Messages

Maybe you are looking for