Need Help with Linksys router broadband-b

I have a Linksys wireless-B broadband router for some reason it just went crazy on me. My wireless card is a wireless - G . Now when i had Verizon DSL i got this router and a USB wireless adaptor from verizon. I had the usb adaptor on my wife computer and the router and modem on my notebook for six months we had there dsl service until we moved to a nother city. Once we had all of our service's transfered to the new home we could not get verizon DSL there.
So for a nother six months we had to use dial up and being that we run a home business dial up was just not up to the task. Well we got rid of dish network just to get cable T.V. just to get the cable broadband service. That's when i got a wireless card for my notebook anyway for six months the network was working just fine with the router and my wireless card.
Until Sept this year just a few weeks ago the router started going crazy. Before my note book was config for windows to connect linksys was connecting and i would see all conection in the site survey, and my own network also. Until a few weeks a go my network would not show .
So i call linksys the have me download some up dated firmware that would not install on my notebook or my wife computer after being on the phone for hours with linksys they come to tell me that the router is ok and working alright after all the test and steps they took me through with the router. Linksys tells me that there is something wrong with my PCM slot on my notebook or either my linksys wireless card. Ok First of all i can pick up signal on other networks and go on line like the Hilton Hotel when i go in there parking lot, Second i can pick up othr networks and get on line that are not secured sometimes so this tells me that there is Nothing wrong with my PCMI slot or the wireless card.
Now i took my router across the street to a friend house and guess what he gets a signal off the router with his notebook but i can not and when we plug the router in the AC outlet the internet light was flashing like crazy and my wireless card was not even in my notebook so that tells me that someone close was pulling signal off my router but i cant.
Can someone please explain this to me i want to get another router wireless - G this time but if there is something that can be done to get this one working like it should that would really help.
The Notebook has been checked out and config and that works well when i hook the either net plug in from the modem the router was config as well but i just can't get a connected to the router when i use the wireless card.

Yes press and hold the reset button in back for 30 seconds and release. Wait 10 seconds and power cycle the router. Now connect to 192.168.1.1 username blank, password 'admin'. Now try.

Similar Messages

Nooblet needs help with Linksys WRT160Nv2 wired setup please

Hello,
I have set up my Linksys WRT160N and when I check the router status in the web based setup page, Status tab, there are numerical values for Internet IP address.
So, I believe the router is connecting to the internet via my netgear modem without any issues.
The problem I am encountering is that my browsers (I have tried Explorer and Firefox) are not accessing the internet.
I have attempted to access the internet with firewall off, but still no success.
Can someone give me some advice as to what settings within Windows XP or otherwise, that I need to alter to correct this issue.
Thank you in advance,
Message Edited by phanTom2909 on 11-14-2008 02:24 PM
Message Edited by phanTom2909 on 11-14-2008 07:37 PM
Solved!
Go to Solution.

Thanks for the help guys.
I seems to have fixed it. I uninstalled the Intel Pro Wireless software and rebooted.
Then I installed a driver 3 version old.
This did half the job, under Network connections when I 'configure' the network card, it is now showing a MAC address, before the uninstall and reboot, the MAC was all 0's using configure, but ipconfig/all was showing the right MAC address.
But, now the wireless was constantly acquiring an address, then connected, then went straight into acquiring an address again. then would not connect after a few attempts. Before the uninstall, it showed as connected, but I wasn't able to use the connection to access the router, internet etc.
Now, to fix the constant acquiring an address, I updated the driver to the latest driver along with the Intel Pro Wireless software and now here I am happily using my wireless connection without any hassles.
Again, thanks for the help.

Need Help with Output Routing...

Ok, I've spent a few hours trying to figure this out and I give up....here's my question:
I've got a MOTU Traveler and I'd like to have the Logic Output 1-2 feed its signal to both MOTU Analog Output 1-2 (Main Out) and Analog Output 3-4. I want the same signal going to both places. Basically I have two different sets of speakers I use when I'm finishing up a track and like to A/B between the different speaker sets. I've tried everything in Logic and other then setting up another output in Logic labeled 3-4 and manually switching each channel and bus to that new output, nothing works. I also tried the cuemix console and didn't see anyway to do it in there. The only other thing that seemed to work was using an I/O plugin sending output 1-2 to output 3-4, but the signal was super distorted going into 3-4. Anyone know how to have a single Logic Output (1-2) go to multiple Outputs on a MOTU?

Hi,
You can set up another output (3+4) and feed it from a buss that is at unity gain,from the main output 1+2
Then in your cuemix you can calibrate that output to be the same level as the mains,so when you compare the speakers,the levels stay the same when switching.
Just make sure to check the physical outputs on your traveler are set to the correct impedance (+4 or -10) to match the main outs.
Cheers

Purchased extreme to replace modem/router DSL used telephone cord need help with set up

Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?

How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

Need help accessing the router web page. I have been tol...

Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanks

What router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM

I have need help with something Please respond Quickly :)

I have need help with something Please respond Quickly ok so i have the linksys wrt54g Version 2.2 and i upgraded the firmware to V4.21.4 from this site http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G and i clicked V2.2 for the router. So after i upgraded i lost internet ability i can't use the internet so i had to downgrade back to V4.21.1 but i want the things that newer update sloves. Please Help. Everything thing says DNS error? aka Modem.
$$Cgibbons$$

Ya i tried that i tried restoring and redoing everything when i downgrade back to .1 it works fine though?
$$Cgibbons$$

Need help with Airport Express and so on.

Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

Need help with a WRT54GS V5.1

i need help with my WRT54GS V5.1 wireless router. it cannot connect to the internet and i don't know why. at the moment i have to use an ethernet cable coming from a virgin media modem. information that might be usefull. one of the antennas on the router is broke i am using windows vista on a toshiba laptop. the model is WRT54GS V5.1 thanks for people who help note: i am only 13 so somethings you say i might not understand.

Access Setup page of router .....
Click wireeless tab .... have a note of the wireless settings on that page .... Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live.

HT201269 I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone I purchased 2 weeks ago when my Iphone was stolen. I don't know how to get the money or music on new phone?

Need help with Itunes transferrs and can I use my Edge phone as a router?

I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone
Is this an iPhone?
Set it up using the AppleID you used on the previous iPhone.

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

NEED HELP WITH WORKFLOW CONFIGURATION

I need help with 3 situations below. Please help me with these. How do I configure these. I also haveto provide specs to the Abaper. What exactly do I need to include in the specs. I anyone has the specs similar to these please send me over. Also tell me what I need to do to get these requirements fulfilled.
1) Description:
This is a workflow requirement to serve as a reminder of upcoming investment
maturities.
Requirements Details:
Create a workflow to serve as a reminder of upcoming investment maturities.
Donor System Processing Narrative:
Read the maturity dates on investments.
Target System Processing Narrative:
Send a notice to the parties that an investment will be maturing soon.
2) Description:
Implement workflow to route invoice receipts using a one time vendor for management
review and posting
Desired Functionality:
If a one time vendor is entered by the AP Voucher Clerk the invoice will be automatically
parked by the program and a workflow notification triggered to the Accounting
Supervisor and Accounting Manager (backup). The Accounting Supervisor will review
the parked document and imaged copy of the actual invoice and post the parked
document.
3) Description:
An approval workflow is needed for credit memos posted to SAP customer accounts.
Desired Functionality:
The Cash Journal Clerk will post a credit memo to the customer account using transaction
FV75 Park Customer Invoice. This transaction will automatically trigger a workflow to
the Accounting Manager for approval and then to the CFO who will approve and post the
parked document. (In order for this transaction to automatically trigger what configuration needs to be done).

Bob;
You can borrow the example code that ships with both NI-DAQ (in case you are doing NI-DAQ function calls) and Labview. The best examples to start with are the ones that have the prefix STC.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

Help with WRT54GS Router

Hi Im using windows vist and I need a little help with my router. I installed the EasyLink Advisor. I was setting up my router and it got to the step where it said something like; "Make sure you see these indicator lights" or something like that. So All of them were on and it said detecting router. It then went to a screen that said reset your router so i unplugged it. when i tried it again it said it didnt detect my router. All the lights were on Im on the internet right now but it still cant detect my router. Any help would be greatly appreciated.

Let me know who is your Internet Service Provider ... so that i can reply you few manual steps to configure the router ...

I need help with my bill

We have put together a few FAQs to help with some of the questions you might have about your BT bill.
Please click on the links below to find the answer you're looking for:
I don’t understand my bill – what do all these charges mean?
Help with my rental charges
__ (i) Where can I find a breakdown of my BT rental charges?
__ (ii) I recently changed my package and think I've been charged twice
I need help with my bill
Why is my bill higher than normal?
I thought the calls in my Calling Plan were free - why have I been charged?
Can I view my BT bill online at My BT?
What do I do if I want to change or cancel my BT package?
Check below for is a list of our archived billing posts:
How to get the most from your online account
Why go paper-free?
Live Chat - Connect to a billing advisor
Your Bill explained
How to get the most from your MyBT account and reasons to go paperfree
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Where can I find a breakdown of my BT rental charges?
The rental charges (sometimes called service charges) shown on your bill are for line rental, plus any additional services such as Calling Features. You're charged for these in advance.
You can view your current rental charges online when you sign up for My BT.
I recently changed my package and think I've been charged twice
When you change your telephone calling plan, calling feature, broadband or BT Vision package, you may get a bill that's confusing or looks like you've been charged twice.
Don't worry, you won't be charged twice. We charge in advance for our services, so you'll see charges for both your old and new services on the bill, even though your old service has been cancelled. You'll be refunded what you paid in advance for your old service on the same bill that shows the advance charges for your new service.
This can also happen when we rename or re-price our products and services. You should see that you've been refunded for the old product name and then charged the same price for the new product name.
Example:
Below is an example of what you might see if you change your package after your bill is issued.
Mr. Smith is on the Unlimited Evening and Weekend Plan and is charged in advance for his service. This is shown on the bill he gets every three months.
Mr. Smith's bill is issued on 1st May and will show the standard advance charges from 1st May to the 31st July, as shown below.
On the May 23rd Mr. Smith calls BT to change from the Unlimited Evening and Weekend Plan to the Unlimited Anytime Plan. Because he's already been charged for the Unlimited Evening and Weekend Plan on the bill from the 1st May, the changes he's made will be shown on his next bill.
When Mr. Smith's next bill is produced on 1st August, he can see the changes to his rental charges. You can see from the highlighted area on the bill pictured below that Mr. Smith has been refunded the charges he's paid in advance for his old Unlimited Evening and Weekend Plan.
This refund is from the time Mr. Smith changed the package (23rd May) until the end of the previous billing period (31st July). The refunded amount shows as -£35.63.
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I need help with my wifi text. I can't use them

I need help with my iPhone 4. I can't text since. I get wifi in my house ?

What is the make & model of the wireless router that you are trying to extend with the WN3000RP? Can any other wireless clients connect to the extended network, just not your iMac?

Re: I need help with wi-fi password

i need help with wi-fi pass word

I am trying to connect my iPhone with my wireless router and looks to be rejecting the password I have saved for my password for my rounter. I tried emailing for it and the support page for this is not recognizing what I think would have been the email I had at the time it was set up--we are currently not using that email address--and tried by current internet email and it's rejecting that too. I registered as a new user to get in to look for help on this. My previous email probably would have been [email protected]
I have my serial number and such to my router (model: WRT54GSv1.1) if needed. Please advise.

Need Help with Linksys router broadband-b

Similar Messages

Maybe you are looking for