Need help with loading master data from R/3 to BI 7.0.

Hi,
       First i thank everybody who took efforts to answer for my posting, i really am learning this new version with your helps. I really appreciate  it.
Could any one help me with a step by step process to load master data from R/3 to BI 7.0. Please don't send help.sap.com.
will assign points .
With Thanks,
Ranjani R

Hi,
    Thanks for the answers. I tried loading it yesterday, i had lot of confusions.
  What should i do to load a master data from a R/3 to BI7.0.
1. Created a Info object named (EKKO_mas) with some attributes (ernam, ekorg, lifnr).
2. Go to info provider and right clicked on info area and selected insert char as data target. (Please correct if i am wrong).
3. Login to R/3, go to sbiw generic data source created one with a view/table as EKKO and map the application compound and select the needed fields by checking the checkbox. (please correct if wrong).
4. Go to source system tab and replicate data source. ( Please correct if i am wrong)
Then what should i do.
guessing steps:
4. Create a Data source, in BI 7.0 . In that as i am not using flat file, should i select "application server" instead of "local workstation" . In field tab i specified all the fields given in Info object. ( Will there be anything else i should do or change in this tab)
5. Load data in PSA. ( will the data from R/3 i selected loaded in PSA without any problem)
6. Create transformation , save and activate.
7. Create DTP save and activate , click execute.
By doing the above given step will i be able to load the master data from R/3 to BI 7.0 data target (IO) .  Please help me if something is wrong with my steps.
Thanks.
RR.
*will assign points.

Similar Messages

  • Need help in loading master data.

    Hi everyone,
              I am just a beginner in BI 7.0 . I know Bw 3.5 . I need help in loading master data(flat file) in a step by step manner.
    Before posting this forum i searched and checked out other related forums too, as i am a beginner i am unable to follow them. Lots of the forums gave the help.sap.com link which i used and got a little help but not fully, so please don't send that link.  I need a step by step guideline from somebody, which says everything from the beginning till monitoring say like
    e.g.. 1) create a InfoObject by right clicking on InfoObject catalog.
    something like that.
    please help me get a clear and detail step by step procedure to load a master data (Flat File should be good) which may help me get a start will other things without much help.
    Please help me learn.
    Thanks.
    Ranjani.

    HI,
         Thanks for your reply. This is what i did.
    1) Created a Info Area.
    2) Created Info object catalog & activated
    3) created info object with nothing except some 4 attributes.
    4) Created Application compound in Infosource tab.
    5) Right clicked on Application compound and chose create Infosource in which chose a option with 3.x and chose the flexible update and gave the info object name.
    6) In info provider tab , in the Info Area right clicked and chose the Insert char as data target option.
    Now, i am stuck. I have no idea what to do next.
    I know i have to create a transformation - There are two tabs in Transformation box, what should i do there.
    Please help me from point 6 to cont., to load the data.
    Thanks.

  • NEED HELP WITH TRANSFERRING P2 data from the HVX camera to FCP!!!

    Hey guys...
    Need some emergency help here... I'm trying to transfer my data from the P2 card on the HVX camera to my FCP6. I plugged in my 1394 firewire cable into the deck and followed the directions but the computer is not recognizing the HVX camera. PLEASE HELP!!!
    Jeremy

    They come with the camera on the Installer CD. OR....
    https://eww.pavc.panasonic.co.jp/pro-av/support/desk/e/download.htm#p2pcdriver
    http://panasonic.sixbullets.net/
    Shane

  • Issue while loading master data from BI7 to BPC

    Dear Experts,
    I'm trying to load master data from BI7 to BPC NW using scenario 2 mentioned in the below document.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827
    My requirement is need to load 0GL_ACCOUNT attribute and text data from BI7 system to BPC.
    1.As mentioned in the How to...doc I had created a dimension called GL_ACCOUNT using BPC Admin client .
    2.Able to see GL_ACCOUNT in RSA1, when I try to create a Transformation(step 17 , page-40) to load Attribute data I could not find source of transformation object as 0GL_ACCOUNT(which exist in BI7) . I could only able to see only dimensions available in BPC system when I click F4 in Name.
    What could be the reason to not getting BI infoobject as source in BPC?
    Thanks in advance...
    regards,
    Raju

    Dear Gurus,
    My issue got resolved. So far I'm trying to pull data from R/3>BW>BPC. In the existing land scape BW and BPC are 2 different boxes. That is the reason I couldn't able to see BW objects into BPC (since 2 are different boxes). To resolve the issue I have created a new infoobect (RSD1) in BPC and data loading is from R/3>BPC infoobject(which is created through RSD1)>BPC Dimension.
    Thanks and regards,
    Raju

  • Issue while loading master data from BI to BPC

    Dear All,
    I am loading master data from BI to BPC using the process chain /CPMB/IMPORT_IOBJ_MASTER. I ran the package and package status was success. But few member ID's which are available in BI are not getting loaded in BPC. Nearly I have 1300 ID's in BI. Out of 1300,only 1270 ID's are loaded in BPC.
    I haven't restrict any ID's using conversion file as well.
    What could be the reason? How can I overcome this and load all member's ID in BPC?
    Thanks & Regards,
    Ramesh.

    Ramesh,
    Whats the write mode you have chosen for the CPMB/IMPORT_IOBJ_MASTER chain ?
    Check if you have the Update mode ..
    Hope this helps...

  • Loading Master Data from SAP R/3

    Hi Friends.,
               I'm going to load master data from SAP R/3 FI Modules to BW, but what do these objects mean by ?
    0LOGSYS - Source System
    0SOURSYSTEM - Source system ID
                     I'mn't understanding clearly, and also transfer rules aren't mapped properly.
       can anybody clarify these things ?
    Regards.,
    Balaji K. Reddy

    Hi Balaji,
    You need to use these objects when your BW is feed by different source system and you want to map differences beetween Master and Transactional Data fed by the different systems (different R/3 - Flat File - Legacy Systems - ...).
    If you do not have this situation you can avoid to use these objects (probably you find these objects in Tab compound of your MD).
    Ciao.
    Riccardo.

  • How to load master data from 2 source system without using 0logsys as compo

    Hi Gurus,
    I am working on a project which has 2 source systems.
    Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
    So, please help me out providing logic.
    thanks in advance
    Peter.

    Hi Peter,
    Can you brief me how did you resolved your issue?
    Regards
    Utpal

  • To Load Master Data From Two Source System

    Hi All,
    I have a small question :
    - Can we load master data from two different source system say from flat file and R3 or any two different or similar source  system?
       If answer is "Yes", then how?? If possible step by step.
    Appreciate your valuable points.
    Thanks,
    Niraj Sharma

    Hi,
    Still i have problem.R3 Transformation and DTP is getting activated but when i am executing DTP for flat file,
    I am getting below ERROR.
    Object DTP DTP_d55.......could not found in version A.
    I have  checked the Master data locally for source sys in compounding Tab of the key field.
    Please help..
    Thanks,
    Niraj

  • How to load master data from SAP R/3 system like Customer master...........

    How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............

    Hi Bramha,
            Check ...........
    Re: master data loading in BI 7.0
    /message/4708129#4708129 [original link is broken]
    Re: Master data loading.
    Regards,
    Vijay.

  • Load master data from BI 7.0 to BPC NW 7.0

    From BPC 7.0 NW, SAP has standard package to load transaction data from BI cube to BPC cube, However, it dose not have the standard package to load master data from BI master data to BPC master data(dimension),
    Is this mean that we have to load the master data from BI to BPC through flat file? or we  can create some customer package(process chain) to load it?

    Hi JW,
    You can automate the master data load from BW if that is what you are trying to accomplish. Have you seen this guide: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827 ?
    Additionally you can also develop a custom process type and use it in a custom process chain alongwith a data manager package to load master data if you don't want to use any flat files at all.
    Regards
    Pravin

  • Need help in fetching requested data from JSP

    Hello,
    I really need help in fecthing requested data from JSP to servlet. Can anyone assist me as soon
    as possible because I must finish my program by today.....( 20/02/2002).
    Thanks in advance.

    It is very likely that somebody can help you, if you say what your problem is. In fact somebody might already have helped you. What is your problem?

  • Issues with loading master data and hierarchy from BI InfoObject

    Hi,
    I was successful with loading the master data from BI InfoObject. It copies the text node as well but it discards the space I have in the technical name when it copies it to BPC. For example if my Text Node technical ID is "NODE 1" it copies it as "NODE1" on BPC side because of which my hierarchy load fails as it is not able to find "NODE 1".
    What is the reason it deletes the space from technical ID? and how can I resolve this issue?
    Do we have a provision to write a ABAP exit where I can check?
    (PS: If i manuallay enter space on my BPC dimension the hierarchy loads successfully)
    Thanks in advance,
    Diksha.

    Hi,
    You can check this in start routine which can be called from Transformation file using BADI.
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/28/b66863b41f47589b9943f80b63def6/content.htm
    Hope this helps...
    regards,
    Raju

  • BPC Error while loading master data from SAP BW

    Hello Guru,
    I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
    I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are  in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP  and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
    I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
    Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
    Q. Do i need to activate any BADI's for this or not ?
    I appreciate your help in advance. I trie

    Hello Guru,
    Currently i am getting below error while loading costcenter master data from BW to BPC.
    Task name MASTER DATA SOURCE:
    Record count: 189
    Task name TEXT SOURCE:
    Record count: 189
    Task name CONVERT:
    No 1 Round:
    Info provider  is not available
    Application: ZRB_SALES_CMB Package status: ERROR
    Anybody can tell me, if i have missed anything ???
    Regards,
    BI NEW
    Edited by: BI  NEW on Feb 23, 2011 12:25 PM

  • While Loading Master data from BW Info Object

    Hi,
    What is the difference between the two options
    "set filters by Attributes AND Hierarchies" and
    "set filters by Attributes OR Hierarchies"
    when we load master data attributes/texts from BW Info Object.
    can someone please explain in detail with example.
    Thanks,
    Rishi

    Hi Rishi,
    While looking at your question -
    What is the difference between the two options
    "set filters by Attributes AND Hierarchies" and
    "set filters by Attributes OR Hierarchies"
    when we load master data attributes/texts from BW Info Object.
    can someone please explain in detail with example.
    This is not what you are explaining in second post.
    Kindly close old threads properly if your queries are resolved , so that it will helps other.
    Shrikant 

  • Problem While loading Master data from R/3

    Hi All,
    When i am trying to load masters data from R/3 datasources to BW Info objects in Info provider menu data is coming to PSA but going to dta targets. the data is matching with the data in R/ 3 but
    Missing message: Request received
    Missing message: Number of sent records
    Missing message: Selection completed
    Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
    Info IDoc 1 : sent, not arrived ; IDoc ready for dispatch (ALE service)
    and error message says ERROR 4 in the update.
    Can you please help me in this regard . Its Urgent.

    Hi,
    Check for pending IDOCS in BD87 or SM58 and execute them.
    In RSMO, select the particular load you want to monitor.
    In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
    In the next screen you can select the Execute button and the IDOCS will be displayed.
    Refer this Tcodes for IDOC status.
    WE02 Display IDoc
    WE05 IDoc Lists
    WE06 Active IDoc monitoring
    WE07 IDoc statistics
    WE08 Status File Interface
    WE09 Search for IDoc in Database
    WE10 Search for IDoc in Archive
    WE23 Verification of IDoc processing
    IDOC
    www.erpgenie.com/sapgenie/docs/ale_whitepaper.doc
    Check Note 561880 - Requests hang because IDocs are not processed.
    OR
    Transact RFC error 
    tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
    Step 1:  Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
    queue thats under outbound processing and click on display the IDOC which is on the menu bar.
    Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
    place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
    (Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
    Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
    to the particular TRFC request for that Idoc.
    Thanks,
    JituK

Maybe you are looking for

  • Deletion of Leave which is in Status 'SENT' by employee in SAP HR

    Hi All, We are using BADI  (BAdI Definition PT_ABS_REQ) for leave validation. In this validation we are checking Current Leaves with the Leaves already applied (Approved / Non-approved). In this process, We are trying to DELETE a leave which is in st

  • HDMI Cable to Mac Cumputer

    I have a Camcorder with HDMI port connection. How can I connect HDMI Cable to a Mac Computer?

  • Checking balances with asset register and Trial balance

    Hi , Need to develop a report for checking balance with asset register  and Trial balance. Now asset balances and TB is not matching. We need report at Plant level. pls suggest Regards

  • Transports into Production

    I was told that in order to transport changes to an ODS or update rules, the data in the target ODS must be deleted prior to transport.  But, if you have a lot of data in an ODS in Production, how do you save the data if you need to do a transport? T

  • Doubt On Screen Processing

    Hi While creating any lay out for screen, in Attributes tab we have Box called Screen Type.In that screen type we have Normal Subscreen Modal Dialog Box Selection Screen. I didnot find any difference if i select Normal or Modal Dialog Box, Can any on