Need help with long movie
I created a movie in iMovie that runs 56 minutes. iMovie keeps crashing when I try to share it in large format, so I broke the movie into two parts and was able to share. I needed to add chapters and did that in GarageBand.
How do I combine the two movies in iDvd?
Who/what were you sharing it with?
Your finished movie will easily fit on a DVD burned in iDVD. If you have the full 56 min. project still in iMovie, SAVE it, then close iMovie. Open up iDVD and import your movie. iDVD will render your movie and burn it.
EDIT: OH Sorry, forgot to notice you are in iMovie 08, so the workflow is slightly different. To get the two movies back together, I'm thinking you could re-import them into iMovie to combine them again and then burn the DVD.
Message was edited by: Forest Mccready
Similar Messages
-
Need help with rented movies and Apple TV
I rented two movies from the iTunes Store from my laptop rather than my Apple TV. I cannot get the rented movies to show up on my Apple TV. I've tried to "move" the two movies from my laptop to Apple TV via the Apple TV tab in iTunes where it shows both movies under a "Rented Movies" section and gives me the option to "move" each one to my Apple TV, but when I click on each movie to move it to the Apple TV and then hit "Apply," nothing happens (at least as far as I can tell). Is there someplace special I need to find rented movies using my Apple TV remote? I clearly need help, please!
Hi Winston,
I have purchased the third generation of Apple TV but have not installed it yet, so I am still using my second generation Apple TV, for which I posed this question. Is the answer different when using Apple TV II? -
Need help with long sync times - busy optimizing unchanged pictures
Before the latest update I was having a problem with long sync times, often with time spent optimizing pictures that hadn't changed since the last sync. This morning I did the latest update and now it's going on hours updating. Again, optimizing >8000 pics, none of which have changed since yesterday's sync.
Any suggestions as to what to do? Thanks.Yes I plug the IPOD into the USB port. Today it is a little worse. When I plug it in it will sync for a moment, pop the message that says IPOD IS SYNCED TO ANOTHER COMPUTER DO YOU WANT TO SYNC TO THIS COMPUTER. If I say yes it immediately says FILE NOT FOUND. The whole page locks up and I have to shut the computer down and restart.
Sometimes it just recgonizes the named of the IPOD then immediatel disconnets it. I am so frustrated with this POS and copy protection and all the other things Apple is doing to ensure there songs are not stolen. It is a PAIN and now this...149.00 gone down the tube. -
Need help with long web movie workflow!
Hi,
Maybe a simple question...
Can FCP capture footage from the camcorder at a different resolution than "normal"? For example, can I capture a standard DV signal at 320x240?
Currently I am finding myself taping a lot of long government meetings where the ultimate goal is a 320x240 web based movie. What I do now is shoot the DV footage, download to the computer, and then compress to 320x240 (in FCE) but that takes forever (some of these meetings can go on for six hours). Need to have these up the next day, if possible. As a side note, if FCE can do this please tell me how!
If FCP cannot do this is there any software that can? I have tried Quicktime Broadcaster and used the saved file which works ok, but I've had some trouble with files going out of synch for no obvious reason.
Finally, if you know of a camcorder that can record to variable pixel dimensions that would be interesting too, expecially if the files where hard disk based instead of tape.
Sorry for the long post--thanks for your thoughts!
--DarinStill pondering this one--anyone?
I did find a third party utility (Media Capture) that might work and I do see that Quicktime will import very small sizes. Wirecast seems seems like it will work (saving the file instead of broadcasting it) but it is $500.
Still hoping to find something better...
--Darin -
Need Help with slideshow movie !!!
I am trying to turn a slideshow into a quicktime movie with iMovie. I have imported the images. How can I get them to sort according to file name (so they will be in the right order) without having to individually move every slide? There's 293 of them. And is there a way to select all images and apply the "fit" action to all at once so they don't do the Ken Burns effect but just remain stationary?
Do you have the images loaded into iPhoto? Are they in an events?
I just dragged with one events (with 19 photos) into iMovie to create a photo slideshow. iMovie seems to follow the sorting sequence you set within iPhoto. So as long as you specify the sorting in iPhoto to be [By Title], then it should work. In iPhoto, you can highlight the event and click Show Photos. Then click View > Sort Photos > By Title.
And to apply "Fit" to all pictures, you just have to select all pictures (Cmd-A), then make the change to anyone of the pictures. Because you selected all pictures, they will all set to "Fit".
Hope this helps.
Michael -
I downloaded a movie through iTunes last night for use with the iPhone 3G and when Sync'd it does not allow it to play. Can anyone help? Do I need to download an App to convert or can I convert this directly through iTunes? I understand that the movie file has to be an MP4 which I believe already is when downloaded through iTunes directly? Please help.
Also, one more question.. Is there an App out there I could download to make use of a zoom in-out function for the built-in camera in the iPhone? How about recording videos?
Thanks in advance!Do you see the movie in your itunes libary? I believe of you highlight it and right click it will show a option to convert video for ipod (mp4). I have only tried this with my own videos and not anything from itunes.
If you set you sync options so you have manual control over file management, are you able to click and drag it on to the phone? -
Need Help with Videos/Movies/TV Shows
I have 2 Music Videos, and 1 TV show. When I try to play them, they are choppy. The screen is divided into about 50 sections and most of them display the same image. I don't have an ipod that plays videos. Im getting that for christmas so I can't say if it plays choppy on there. Also in itunes I have the same problem when viewing tv shows or movies. The cd covers are ok though.I made a website with the screen shots of the videos
itunes and itunes2 are mind of mencia(Tv Show)
itunes3 is fix you(music video)
itunes4 is the tv shows tab in the itunes store
itunes5 is the movies tab in the itunes store
itunes6 is an album cover from nickelback, its perfectly fine
http://www.geocities.com/tatem21/itunes.gif
http://www.geocities.com/tatem21/itunes2.gif
http://www.geocities.com/tatem21/itunes3.gif
http://www.geocities.com/tatem21/itunes4.gif
http://www.geocities.com/tatem21/itunes5.gif
http://www.geocities.com/tatem21/itunes6.gif
I'd greatly appreciate all the help I can get!
Gateway Windows XP Norton Internet Security detects no viruses/spyware on my computerYes I did, several times. I unchecked the items in Directx one at a time until they were all gone. I even went out and bought a Gig of RAM thinking maybe that was a problem...I now have 1280 and no improvement. I called and emailed ITunes tech support--they said there was an issue last night with downloads that is corrected now. I purchased the TV show again, and have the same problem. Getting frustrated...
-
Does I movie allow you to download videos like, for example, The Pirates of the Carribean Trilogy? If you don't have I-movie, is it possible to download movies^
To download movies, you need iTunes, Quicktime Player (comes with iTunes), and an account at the iTunes store.
You do not need iMovie for this. -
No second page in rolling title - need help with long title
I am creating my first rolling title in Premiere Pro v1.0.
I have read/watched the tutorials on creating a rolling title and have successfully created my own.
My problem is that I have several pages of prepared text that I want to have roll over the screen and I only can get the first page.
I have the text in Notepad, I copy it to the Clipboard using Control-A, Control-C.
I come into the Title Designer, select the Type Tool, and press Control-V. The first page of the text is inserted into the Area Type box.
I then save the work and preview the results, but I am only getting the roll of the text for the first page.
Can someone please point out to me what I am doing wrong or direct me to some documentation/tutorial that shows how to insert a long amount of text into the Title Designer and have it roll?
ThanksI currently do not have Photoshop available to me and I was really hoping for a simpler method to do this.
That is why I mentioned method #2. It relies totally on Titler. Other than doing X number of Titles, and then adjusting their timings and spacings with Motion>Position Keyframes, it takes all of about 5 mins. to do. You can first break your one very long Title into logical segments, and then still use Ctrl+c/Ctrl+v to make each Title. Note that you can get more text into a Title, than what you see in Titler. It does not have a "scrolling" feature, but using Ctrl+c/Ctrl+v, you really do not need to see everything, so long as you edited it in Word/whatever. I'm not sure of what the limit to what can actually fit onto one Title, before it truncates, but seem to recall about 32 lines working with 48 pt. san-serif type for me. Could be off a line, or two.
If you need more detail on the multiple-Title method, let me know. It is far simpler to do, than to type about. Also, if you are not yet comfortable with Motion>Position Keyfreame work, now is the perfect time to learn it, as you WILL embrace it. I do not think I have used either the Roll, or Crawl Preset in four years - so very little control. That's why I said you'd go crazy trying to use those for this task. If I had to do it with the Presets, I'd charge the client 3x, just for the aggravation of having to do so.
Good luck,
Hunt
If you have any questions on where to break your long credits, don't hesitate to send me the Word, txt, whatever file, and I'll look at it and make recs. for you. E-mail is listed in my profile. -
Need help with long term Java problems
I've been having problems with Java on my computer for about a year now, and I'm hoping that someone here can help me out.
Java used to work fine on the computer when I first got it (a Dell laptop) and I hadn't installed anything myself. But then one day it stopped loading Java applets, and hasn't worked since. By this, I mean that I get the little colorful symbol in a box when I try to play Yahoo games, use the http://www.jigzone.com site, go to chat rooms, etc. Java menus on websites like http://www.hartattack.tv used to work still, but lately they've been giving me that symbol too.
I've tried downloading a newer version of Java, but nothing I do seems to work, and I don't know of anything I did to trigger it not working. I'm hoping there's a simple solution to this, and I'm just dumb.
Thanks.This might be way off, but it's something that's tripped me up in the past:
If you are using Sun's Java plugin, the first time you go to a site that has a particular Java applet, you may be asked to approve/reject a security request.
If you have clicked on any other windows while the request is first being loaded (which can take some time, because this is swing based), then the security dialog box does not pop to the top of the window stack, and doesn't add an entry into the task bar.
It appears that Java just doesn't work, but it's actually waiting for you to click "Yes". You can check this by hitting alt-tab and seeing if the Java coffee cup icon is one of the options.
- K -
Need help with using Movie Clips
I know how to create a MovieClip object, add it to the main
stage and even add things to the movie clip but how do I create
frames within that movie clip that I can "gotoAndStop" or
"gotoAndPlay" with?Ok, I know replying to my own post is odd on some forums, but
anyhow:
I've done some further testing and find that FlashObject
isn't the problem.
Looking at the AS code above, it is clear that the SWFs to be
loaded must be in the same folder as the HTML web-page.
However, my intent is that these small SWFs that are being
loaded in by the main SWF will be shared by many other movies,
therefore I'd like to stick them (the physical SWF files) closer to
the root of the site (e.g. SiteFoler->flash).
I see that my problem rears its ugly head when I try to
reference these movies in my main flash movie as follows:
First movie:
this.createEmptyMovieClip("mcToolbar", 10);
with (mcToolbar)
_x=8;
_y=68;
loadMovie("../../../flash/toolbar.swf",mcToolbar);
Second movie:
this.createEmptyMovieClip("mcWindow", 11);
with (mcToolbar)
_x=500;
_y=60;
loadMovie("../../../flash/textwindow.swf",mcWindow);
In the example above, my HTML page is 3 folders deep whereas
the movies I'm loading in are 1 folder deep in the folder labeled
"flash".
By doing it in this manner, I get the problems I described
above (first movie loads then disappears and second movie loads in
wrong position).
Any ideas as to why the physical location of the SWFs being
pulled in is causing this problem? I'd like to try to avoid copying
the SWFs to each place their being refrenced from as that could be
a major maintenance headace.
Thanks,
Ben -
I need help with i movie 09 volume lower
It has worked before but somehow it stoped with i put the audio in like a door bell i want the sound lower so it sound real but it wont work
I'm not sure what you are trying to communicate. If English isn't your first language you may want to post in your native language. Also there is an iMovie forum, I'd suggest posting an iMovie question there.
-
HT5622 I need help finding a movie that I downloaded, can anyone help me with this?
Hello, I need help finding a movie that I downloaded, can anyone help me with this?
If you downloaded it to your iTunes library it will be in the Movies folder. If you downloaded it to an iOS device you will find it in the Videos app. This explains how to redownload previously purchased videos (available in some locations as long as the studio permits it): http://support.apple.com/kb/PH12283.
-
I can't find my serial number and once I do I would like to move my Pro to another computer. Need help with both.
Hi Rick ,
Here is the link that will help you find the serial number for your product quickly .
https://helpx.adobe.com/x-productkb/global/find-serial-number.html
You would have to deactivate that software from your older machine first.
Refer to the following link to deactivate your product .
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
After it is deactivated from the older machine you can use it on your new machine just by entering the serial number of the product .
Let us know if you need further assistance.
Regards
Sukrit Dhingra -
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444)
Maybe you are looking for
-
Bluetooth connection fails iOS 8.1
My iPhone5s cannot make a Bluetooth connectivity with any of my Macs(MBA mid-2013, iMac late-2012, MacPro) all running Yosemite 10.10. Prior to upgrading to Yosemite the same iPhone running on iOS 7 did make successful bluetooth connectivity. My iPho
-
Bad script nsExtensionManager.js:623 locks up Firefox add-ons and plug-ins
I've started getting the message below any time I try to use add-ons or plug-ins such as Google toolbar and Yoono. A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the sc
-
Hi.. Can any one throw some light on Response Profile settings..in CRM SERVICE..... Kindly add a scenario so that it would be better to understand the concept... Regards, sanjana
-
Encore CS5 Transcode Crashes System
When transcoding Encore appears to do fine until it gets to the still targa images pulled from the video with rolling credits and music. Then my system restarts. Some stills are offset to allow the credits to roll. System only used for Production P
-
Unable to Report Missing Points
Recently bought a $20 PSN card online but wasn't given the option to enter in my Best Buy Gamers Club ID to get points for the transaction. Went online to report the missing points and the website is saying it doesn't recognize my order number. Pleas