Need help with Low disk space issue and blue screen

Hi Everyone, just seen a message stating a low disk space on my Mac pro bought last November and tried plugging in an external hard drive to remove some pictures to free up some space but it seems that the computer did not have enough space left to start up and run the hard drive. I then tried to restart and ended up with a blue screen and have no knowledge now how to fix this problem. I phoned support but they say I have no technical support left but do have warranty and I would need to either try with the community here or take the unit to an apple store for an appointment. The store is an 1 and 1/2 from me and I really want o see if there is another fix that could allow me to start again then remove some files and then add external drive to remove more. I was blown away at the low amount of storage.....looked for the icloud option last night to upload there as i was told about this by a UK client of mine and now see it is not up and running. Any advice or help by the communtiy would be greatly appreciated as this is my business and travelling laptop. Cheers, Dean <")))><

Great to hear Dean, thanks!
Further notes: OSX needs about 15% or 10GB Free space minimum, but will run mucch faster/safer with 30-40% or 50GB of Free Space... Free Space is no longer ours to use.
Another tool to help clear up assorted things is Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

Similar Messages

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

If nothing else works, you might try this one. It has worked for many others ...
Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414
Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
iPad 2 and iOS 8.0.2 Problems
For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
Here's one person's solution which will help a lot of iPad 2 users!
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

Problem With Low Disk Space - Message - Email and ...

Hi all,
I have a N97 and i noticed that when i have around 200 stored messages in my sent and my received in box then i get the e-mail disconnecting and saying to me that it's been disconnected due to low disk space.
So i tried changing the location of the folders for the e-mails and then i got a warning about the folders not being correct and had to restore them to the original settings.
I'm sure this is also related but some one tried to send me a small video via blue tooth and it told me that the memory was full but for the life of me i can't seem to change where a blue tooth message would go too.
Thanks in advance for any tips.
i know i may have 2 separate issues here but it's all the same low disk space or out of disk space etc etc
it would seem that it's a problem so how can i go about fixng it, it's poor...
The first offering is Nokia's new 'Messaging' client. If you really, really have been looking forward to this then by all means install it, but beware that it will, between application and messagebase, use up a lot of disk C: on its own. And you can't switch the messagebase to 'mass memory', because that gets locked out when you connect your N97 up to your PC or Mac, switching Nokia Messaging back to C:. As a long time Gmail user, I still find it easier to use either the 'old' S60 Messaging application (in IMAP4 mode) or just use the standalone Gmail (Java-based) application, which has the benefit of speed and of an utterly minimal footprint in daily use.
Also offered via 'Sw update' is Ovi Maps 3.1, which also insists on ensconcing itself on C:. If version 2.0 is working well for you then there really isn't a compelling reason to update, to be honest. Or at least not one that's compelling enough to warrant signing over at least 7MB of C: to it. If version 2 isn't working for you, you still shouldn't install v3.1, as offered, but go for the very latest v3.3, from the Nokia Beta Labs Maps page. It's faster and slicker and at least you'll be getting extra functionality for your lost Megabytes, including less troublesome GPS performance. See below for more on the GPS.
Next is Ovi Contacts, a beta-quality social integration system that's yet to take off in any meaningful way. Again, just avoided unless you really, really want to get involved. You don't need to lose the vital Megabytes.
Then there's the N-Gage games client, another C: biggie, seemingly swallowing up 6MB or so in a real world installation - if, like me, you're rather underwhelmed by N-Gage titles (in fact, underwhelmed by gaming on Symbian in general, but that's another rant for another day), then just say no and, again, give your internal disk a break.
The final optional 'Sw update' was Quickoffice 6, bringing compatibility with Office 2007 documents. This also takes up the best part of 10MB on C:, so unless you get a lot of Docx or Xlsx files by email then I'd strongly suggest holding fire on this update - you'll probably get it anyway in the v20 firmware in a few months time.
Message Edited by mowax on 02-Dec-2009 02:38 PM
Message Edited by mowax on 02-Dec-2009 02:39 PM
Solved!
Go to Solution.

Hi, don't know wether you've done this, but go into messaging/options/settings/other/memory in use/set as E:mass memory. If this causes a problem with email, simply delete mailbox and re-install it, it only takes a couple of minutes. One other thing , if you want to save any txt messages, sync with ovi first.Also to get C memory back delete all messages sent , recieved, reports etc before selecting Memory in use as E. Also go to web browser and clear privacy data regularly. One other thing to note is that usually when connected to computer via usb, messaging memory will revert to C, and you won't be able to see any messages , so reset to E again and they are all there. Best taskmanager from Ovi store is also a real help with memory on phone.
Hope this helps, and my appologies for the somewhat eratic layout nof the advice. Should have mentioned clearing messages from C before using E !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Low Disk Space Issue

One of our ZCM servers has a low disk space and looks like most of it is being taken up by folders with package.cab files. The folder location is: C:\Windows\SoftwareDistribution\ScanFile This folder is taking about 10GB and I'm not exactly sure what these .cab files are for. Any help would be appreciated. The server information is Windows Server 2003 SP2 Running ZCM 10.3.3.44626

Flipside82,
these are generated when the DAU runs; it's a bug that they are not
deleted, and a patch is on its way - meanwhile feel free to delete them
yourself...
Shaun Pond

What to do with low disk space warning?

My Time Capsule is blinking amber because of low disk space. Isn't it supposed to delete the oldest files to make more room? What should I do at this point?

Nothing. That warning is separate from Time Machine.
It's useful if you're using your Time Capsule for other data, but Time Machine will take care of running out of room for backups all by itself.

Need help with Hard Disk usage selection.

I am going to get a Mac Pro and I am goint to probably use Final Cut Studio and Photoshop. This is the Hard Disk setup I was thinking of:
Bay 1:WD Raptor X 150GB - OS X and some big applications.
Bay 2:Stock 250GB - Downloads and some programs
Bay 3:750GB Seagate - Music, photos, and videos (Multimedia)
Bay 4:120GB - Scratch Disk for Final Cut Studio and Photoshop
I need recommendations especially about the scratch disk. I need to know if the scratch disk is recommended to have a specific size or speed. Also, instead of the 750GB drive, I would probably wait becaus Seagate might releases a 1TB drive.

Would be nice if we could unleash those other two SATA ports sitting unused untiil there are PCI Express controllers. And are there any drive 'kits' or something in the wings to mount two extra drives? do-able?
If you need 400GB for music, photos and video, then yes, 750GB makes sense. And you think you might want/need 1TB? Given the problems RAIDing those "super size" Seagate's and the unacceptable I/O on some drives reported by Barefeats...
Backup concerns: SATA drives in a universal case with hot-swap drive bays so you can use same SATA as you have internally, and where 750GB Seagate would be nice - and expandable. And where a FW800 interface would be acceptable and offer decent performance (maybe even Oxford 912 "RAID" FW).
For now, it might make sense temporarily to use external for one drive, and reserve the internal drive bays for things like scratch and RAID.
With SoftRAID 3.5.x and 3 x 500GB drives, you could create a stripped RAID using the outer tracks and still have non-RAID or even 2nd RAID using the remaining space.
I would not use 120GB drive for anything. 320 (or 300GB because they are affordable and fast) as the smallest density capacity (except for Raptor of course).
Two 500GB drives, or two 750's if the bugs or problems get fixed, and using those in RAID? Heck, remove the 250GB and get 3rd.

Need help with XML Compatibility between CS3 and CS4

I'm not a Dreamweaver guru but I am hoping someone will recognize my issue and be able to provide meaningful feedback.
Background:
A developer buddy and I are working together to create a new home page for an online retailer that utilizes flash banners. We're using XML to update the content of the banners. My buddy is creating the XML file and sending it to me to populate with content (i.e. descriptions, images, image paths, etc.). He is creating the XML file in CS3 and I am editing in CS4. Here's the issue: Whenever he uploads the populated XML file to the server the banners are displayed correctly. If I take the same file and upload it without editing, it works great. However, if I open the file, edit and resave before uploading to the web server, the the banners all have extra spaces between each line of content - almost as if it were double spaced. If you look at the code, the code looks fine. In fact, the code looks exactly like it did when my buddy sent the file to me. I believe we have isolated the problem to something weird with my installation of DW. I have downloaded and installed any and all updates. Oh yeah he's using a MAC version and I am using the PC version of DW.
Has anyone seen anything like this before???
Help...

Thank you for your response.
The code is listed below and to tell you the truth the following code is both good and bad. As I mentioned before, if my buddy sends me this xml file and I upload it to the server, it works fine. If I open the file and immediately save it without making any changes then upload it, I experience the previously described promblem. It's very strange. The code in both files is identical.
To get a clearer picture of what I am describing, go to http://www.everythingministry.com/beta3.htm. The book descriptions appear correctly under the "New and Recommended" tab. However, whenever I edit any one of the six xml files that control the content for each of these tabs it ends up looking like what you currently see under the "New Music" tab. I have actually tried to update from 2 different machines running DW CS4.
Below are the xml files for the two tabs I referenced in the paragraph above:
ts_new.xml
<items>
<config
Milliseconds="5000"
Distance="3"
BorderColor="0xffffff"
TargetLink="_top"
TextYPosition="200"
MaxDisplayContent="6"
ContentWidth="148"
ContentHeight="300"
TransitionSpeed="0.8"
TransitionType="0"
ShowMouseOver="0"
ShowBorder="1"
ShowGlass="1"
/>
   <content>
    <image>images/crazylove.jpg</image>
    <description><![CDATA[Crazy Love
by Chan Francis
Price: $11.99
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/crazylove.aspx</link>
</content>
<content>
    <image>images/underthesheets.jpg</image>
    <description><![CDATA[Under the Sheets
by Dr. Kevin Leman
Price: $9.99
You Save: 29 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/underthesheetsthesecretstohotsexinyourmarriage.aspx</link>
</content>
<content>
    <image>images/outliveyourlife.jpg</image>
    <description><![CDATA[Outlive Your Life
by Max Lucado
Price: $19.99
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/outliveyourlifebymaxlucadohardcover.aspx</link>
</content>
<content>
    <image>images/lovedare.jpg</image>
    <description><![CDATA[Love Dare Day By Day
Wedding Edition
Price: $16.79
You Save: 27 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/lovedaredaybyday-weddingedition.aspx</link>
</content>
     <content>
    <image>images/lifeinterrupted.jpg</image>
    <description><![CDATA[Life Interrupted
by Priscilla Shirer
Price: $11.99
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/lifeinterruptednavigatingtheunexpected.aspx</link>
</content>
<content>
    <image>images/faithfulfasting.jpg</image>
    <description><![CDATA[Faithful Fasting
by Errica L. Williams
Price: $8.79
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/faithfulfasting.aspx</link>
</content>
<content>
    <image>images/whencouples.jpg</image>
    <description><![CDATA[When Couples Walk Together
Price: $9.59
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/whencoupleswalktogetherjan2011-paperback.aspx</link>
</content>
</items>
ts_music.xml
<items>
<config
Milliseconds="5000"
Distance="3"
BorderColor="0xffffff"
TargetLink="_top"
TextYPosition="200"
MaxDisplayContent="6"
ContentWidth="148"
ContentHeight="300"
TransitionSpeed="0.8"
TransitionType="0"
ShowMouseOver="0"
ShowBorder="1"
ShowGlass="1"
/>
   <content>
    <image>images/untilthewholeworldhearscd.jpg</image>
    <description><![CDATA[Until the Whole
World Hears
Price: $12.76
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/untilthewholeworldhearscd.aspx</link>
</content>
<content>
    <image>images/move.jpg</image>
    <description><![CDATA[Move
by Thirda Day
Price: $11.19
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/move.aspx</link>
</content>
<content>
    <image>images/andifourgodisforus.jpg</image>
    <description><![CDATA[And If Our God
Is For Us
Price: $11.19
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/andifourgodisforuscd.aspx</link>
</content>
</items>

Need help with Go Pro Hero 3 and Premiere Pro CS6

Hello,
I recently acquired PP CS6. I put my clip (30 seconds long) and I go to preview while editing, for the first 1.5 seconds it is fine but then it is very choppy. The audio is fine but the video does not play smoothly. When I save and process the video it is fine. It is frustrating to try to edit video this way. I'm sure I'm missing a step when creating the project but I haven't used Premiere Pro since CS6. This is only happening with Go Pro Hero 3 videos, any of my other cameras are fine. Any ideas? Thanks

There's a lot of confusion over how video encoding affects subsequent editing performance - a higher data rate has no direct relation to how much effort is required to decode and play the footage, in fact a higher data rate often makes playback easier - which is why transcoding to AVI can help with playback even though the files can be hundreds of times larger. Data rates with the same codec depend on the frame contents and recording quality, but for playback and editing what matters is the GOP (group-of-pictures) structure and the complexity of the encoding algorithm. Provided your disks are fast enough the data rate is immaterial to Premiere.
With long-GOP files (as typically created by consumer DSLRs and helmet cams) we have keyframes (I-frames) with a complete set of pixel data, then a series of intervening P- and B-frames which only store the difference between 'now' and 'one frame before' or 'one frame after'. Unless you're on an I-frame you have to calculate the chain of differences from the nearest I-frame, and when editing or applying an effect we must re-calculate the entire GOP, so Premiere has to hold a lot of data in the buffer. Remember all timelines in Premiere are internally transcoded to 32-bit floating point, so it's more work to 'play' the footage in the monitors than would be done by a simple playback-only application such as VLC, or in some other brands of NLE that only work in the footage's color space. Premiere's hardware acceleration (MPE) only kicks in once the buffer has been ingested, all the decoding of the original H.264 frames happens in your CPU.
With digital cinema cameras and some hacked DSLRs, we record "all-I" footage - so there's no GOP overhead and playback/editing is massively smoother. I can scrub all-I footage from a hacked 7D no problem on my relatively-ancient spare laptop, but the long-GOP files from a factory 7D struggle to play at all. Our all-I 7D footage can hit 300MBit/s compared to 35 for long-GOP. Helmet cams such as the GoPro do all they possibly can to squeeze data onto their storage cards, which means they have long-GOP codecs that have some of the most complicated compression algorithms out there. The Hero3's implementation of H.264 uses the Ambarella chip, whose files are very small but an utter nightmare to decode - hence far more of a demand on your CPU than an equivalent clip from a DSLR.
Jim Simon wrote:
Might be the 35 Mbps that is causing the choppy playback.
It shouldn't, assuming sufficient hardware. My GH2 clips often get up to over 90 Mb/s and play just fine on an older i7 920.

Need help with Color Profiles between Photoshop and iPhoto

Hey guys, I'm a photographer and have always used Photoshop in comination with iPhoto. I am having great difficulty lately with color profiles randomly changing within albums of pictures. I need all of my images to be in sRGB, but some somehow end up in Adobe RGB. It seems to happen at random. Apple seems to think it's an Adobe problem. Adobe isn't sure what to do. Anybody aware of any known issues between CS5 and iPhoto using OS 10.8.4 with regard to color profiles and how to fix them?

SRiegel schrieb:
I don't know inkscape, but this article seems to indicate that is will support cmyk.
The article also says you need Scribus to then further process the SVG file.
@shaunamm You need to open the SVGin Illustrator, not place it. But I doubt that you will be able to get the effects in Illustrator.

HT4061 I need help with my I-phone 4S and the Cloud, I can't locate my serial number I also have a new 4g I-Pad Can someone help me

I need help to locate my pictures in the cloud
When my son updated my phone early this year it wiped out all my pictues on my I-phone 4S
How do I access the cloud to view my pictures??

Do you have Photo Stream enabled with your iCloud account on your computer?
iCloud is temporary storage - limited to 1,000 photos and 30 days for each photo.
Photos/videos in your iPhone's Camera Roll can and should be imported by your computer as with any other digital camera especially before installing an iOS update.

I need help with changing my payment info and I have to accounts I want to delete one can u please help

I need help trying to change my payment info I can't but I have to accounts and I want to delete one please help me

We can't help. We're not Apple. Contact the iTunes store support. There's a link on the bottom of every page of the iTunes store

I need help with Yahoo web mail issues - icons are missing.

I need the link to install eWebMail Color and Graphics extension since all the icon in yahoo email for forward,delete, close...etc are disappeared.
Can anybody help me in that.
THANKS FOR ALL
''Title edited by a moderator''

See:
* http://kb.mozillazine.org/Website_colors_are_wrong
* http://kb.mozillazine.org/Websites_look_wrong
If images are missing then check that you aren't blocking images from some domains.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
* Check that images are enabled: Tools > Options > Content: [X] Load images automatically
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions
* Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)
There are also extensions (Tools > Add-ons > Extensions) that can block images.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Satellite L300D-11A - DVD-drive issue and Blue Screen

Hi
I'm going out of my mind :o//
My Satellite L300D-11A was delivered with a Windows Vista Home Premium, but I recently made a clean installation of the Windows 7 Home Premium 64 bits.
Since then I have had problems with "Blue screen error's" comming randomly. Have purchased and installed a Registry clean up program, but that did not fix the problem. Any one else with that problem - and a possible solution.
And now for my big problem. My CD and DVD drive is driving me crazy ;o) It's a Mat****a DVD-RAM UJ-850S ATA and from my search on the internet I have found that a lot of other Mat****a owners have had the same or similar problem(s). My drive will not regonize or play/read from CD's. DVD with movies or programs I can play. Burning CD's is not possible and burning DVD's is sometimes working, and other times not.
I have read about the different fixes that is posted - also here on the Toshiba forum - Non of the suggested solutions is working for me - any new solutions that I could try.
Seriously thinking about buying a external USB DVD drive/burner - but can someone please tell me why Toshiba does not get the fingers out off their B** and find a solution like it seams Sony has done.
Look forward to any reply ;o))
Someone once told me about this quote - "Don't wish it was easier - work on getting clever !" I need your help to get clever ;o))

> But I do not now how/where to get the registration keys! I have tried looking for them.
Are you talking about *Upper/Lower Filters* ?
Follow these instructions for clearing the Upper/Lower Filters:
Click on Start --> Run --> and type in 'regedit' followed by the enter key
Expand the "HKEY_LOCAL_MACHINE" key (looks like a folder) by double clicking it (or clicking the "+" next to it.)
Expand the "SYSTEM" Key
Expand the "CurrentControlSet" Key
Expand the "Control" Key
Expand the "Class" Key
Please look for a key containing the following string of letter and numbers:{4D36E965-E325-11CE-BFC1-08002BE10318}
High light this key by left clicking once on it
On the right hand side you are looking for "UpperFilters" and "LowerFilters" under the "Name" column, once you find these please delete them by right clicking on them and choosing "delete"
Please exit the registry by clicking on the "X" in the top right hand corner of the screen
Reboot your computer

Pavilion dv6-2140ei. Missing driver issues and blue screen.

Hi, I'm Xolani
I have problem devices on my PC which I think may have caused the Blue Screen issue.
Base System Device:
PCI\VEN_197B&DEV_2383&SUBSYS_3659103C&REV_00\4&91078216&0&03E4
PCI\VEN_197B&DEV_2383&SUBSYS_3659103C&REV_00\4&91078216&0&04E4
PCI\VEN_197B&DEV_2383&SUBSYS_3659103C&REV_00\4&91078216&0&01E4
MEDIA:
HDAUDIO\FUNC_01&VEN_10DE&DEV_000B&SUBSYS_10DE0101&REV_1001\5&423D040&0&0001
HDAUDIO\FUNC_01&VEN_10DE&DEV_000B&SUBSYS_10DE0101&REV_1001\5&423D040&0&0101
HDAUDIO\FUNC_01&VEN_10DE&DEV_000B&SUBSYS_10DE0101&REV_1001\5&423D040&0&0201
HDAUDIO\FUNC_01&VEN_10DE&DEV_000B&SUBSYS_10DE0101&REV_1001\5&423D040&0&0301
Unknown Device:
ACPI\ENE0100\4&23038812&0
Please help, I'd really appreciate it.
This question was solved.
View Solution.

You're very welcome.

Need help with Low disk space issue and blue screen

Similar Messages

Maybe you are looking for