Need help with LVM and Virtual Machine Manager

Hello,i want to know if there is any way to install LVM (Logical Volume Management) manually and separately on Linux operating system as when i initially installed RedHat Enterprise Linux 6,i mistakenly did not select the application LVM itself.
Another issue i have not been able to fix is the Virtual Machine Manager.i have tried to connect but it keeps showing me the following error message on RedHat Enterprise Enterprise Linux 6.
Error Message from Virtual Machine Manager :
Unable to open a connection to the libvirt management daemon.
Libvirt URI is: qemu:///system
Verify that The 'libvirtd' daemon has been started
any advices,please feel free to let me know.thank you.

I want to know if there is any way to install LVM (Logical Volume Management) manually and separately on Linux operating system as when i initially installed RedHat Enterprise Linux 6,i mistakenly did not select the application LVM itself.You can install the tools like this:
# yum install -y lvm2Although you can use the tools to construct new LVM devices and partitoins, you can't change your existing partitions into LVM.
Another issue i have not been able to fix is the Virtual Machine Manager. I have tried to connect but it keeps showing me the following error message on RedHat Enterprise Enterprise Linux 6:
Error Message from Virtual Machine Manager :
Unable to open a connection to the libvirt management daemon.
Libvirt URI is: qemu:///system
Verify that The 'libvirtd' daemon has been startedOn your physical host, do this:
# /sbin/chkconfig libvirtd on
# /sbin/service libvirtd startThis will start the virtualization tools.

Similar Messages

Trying to deploy a Service using Orchestrator and Virtual Machine Manager

Hello,
I'm trying to create a runbook to deploy a Service in a cloud using Orchstrator and Virtual Machine Manager, 2012 R2 both of them.
I'm following these 2 links, but not luck.
http://daniyar-tech.blogspot.com.es/2013/07/system-center-2012-sp1-orchestrator.html
http://www.systemcentercentral.com/orchestrator-by-example-deploying-a-service-from-template-with-vmm-and-orchestrator-2/
I'm receiving this error in "Configure Service Deployment" step:
The following errors occurred when invoking PowerShell script:Could not find service template
I configured the Cloud Name and it does not work for me...
Thanks!

Thanks, Marc! This solution worked for me, after many other attempts failed.
Senior Tech Writer, SharePoint Performance and Capacity Management

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

I need help with setting up time machine for backup

I would like help with setting up time machine for backup.

You will need an external hard drive (formatted for a Mac).
Then you plug it in and go to system preferences>time machine and select the external HD and turn it on.
The backups are automatic.
Barry

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Need help with trim and null function

Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
Thanks

Hi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
,       NVL ( AL1.user_data_text, 'XX' )
FROM    Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
            , 'XX'
FROM    Table

Need help with mac and java

Hi, I'm trying to develop an application on a Machintosh OSX 10.2.8 machine.
I'm having a herrendous time trying to get quicktime to work on it.
I've somehow managed t oget 1.3.1 and QTJava.jar to work together but now i need encryption, however that requires 1.4+
Now 1.4.1 doesnt work with quicktime
I've downloaded the latest software upgrades but Ive got no idea how to set up quicktime to work with java 1.4.1
Now to add on top of that mac reports it can use AES encryption. this is from source code ripped striaght from this website.
But first and foremost can anyone, annyonee help me out with setting up 1.4.1 with quicktime?
Thank you

If you need encryption with Java 1.3.1, download the JCE from either Sun (http://java.sun.com/products/jce/) or Bouncy Castle (http://www.bouncycastle.org/).
Cheers,
--Arnout

Need help with INSERT and WITH clause

I wrote sql statement which correctly work, but how i use this statment with INSERT query? NEED HELP. when i wrote insert i see error "ORA 32034: unsupported use of with clause"
with t1 as(
select a.budat,a.monat as period,b.vtweg,
c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
c.wrbtr,
c.matnr,
c.menge,
a.monat,
c.zuonr
from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='D'
and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
,t2 as(
select a.BUKRS,a.BELNR, a.GJAHR,t1.vtweg,t1.budat,t1.monat from t1, ldw_v1.bkpf a
where t1.zuonr=a.xblnr and a.blart='WL' and bukrs='8431'
,tcogs as (
select t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
sum(bseg.wrbtr) as COGS,bseg.matnr,bseg.kunnr,sum(bseg.menge) as QUANTITY
from t2, ldw_v1.bseg
where t2.bukrs=bseg.bukrs and t2.belnr=bseg.BELNR and t2.gjahr=bseg.gjahr and BSEG.KOART='S'
group by t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
bseg.matnr,bseg.kunnr
,t3 as
select a.budat,a.monat,b.vtweg,
c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
case when c.shkzg='S' then c.wrbtr*(-1)
else c.wrbtr end as NTS,
c.matnr,c.kunnr,
c.menge*(-1) as Quantity
from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='S'
and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
,trevenue as (
select t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,
sum(t3.NTS) as NTS,t3.matnr,t3.kunnr,sum(t3.QUANTITY) as QUANTITY
from t3
group by t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,t3.matnr,t3.kunnr
select NVL(tr.budat,tc.budat) as budat,
NVL(tr.monat,tc.monat) as monat,
NVL(tr.vtweg,tc.vtweg) as vtweg,
NVL(tr.gjahr, tc.gjahr) as gjahr,
tr.hkont as NTS_hkont,
tc.hkont as COGS_hkont,
NVL(tr.prctr,tc.prctr) as prctr,
NVL(tr.MATNR, tc.MATNR) as matnr,
NVL(tr.kunnr, tc.kunnr) as kunnr,
NVL(tr.Quantity, tc.Quantity) as Quantity,
tr.NTS as NTS,
tc.COGS as COGS
from trevenue TR full outer join tcogs TC
on TR.BUDAT=TC.BUDAT and TR.MONAT=TC.MONAT and TR.GJAHR=TC.GJAHR
and TR.MATNR=TC.MATNR and TR.KUNNR=TC.KUNNR and TR.QUANTITY=TC.QUANTITY
and TR.VTWEG=TC.VTWEG and TR.PRCTR=TC.PRCTR
Edited by: user13566113 on 25.03.2011 5:26

Without seeing what you tried it is hard to say what you did wrong, but this is how it would work
SQL> create table t ( n number );
Table created.
SQL> insert into t
2 with test_data as
3    (select 1 x from dual union all
4     select 2 x from dual union all
5     select 3 x from dual union all
6     select 4 x from dual)
7 select x from test_data;
4 rows created.
SQL>

I need help with CSS and floating

Okay, I know I need to get up on CSS and get rid of tables in
my sites.
However, I'm running up against a problem, and after banging
my head
against it for a while, I realize I need help. I've stripped
this down
so as to only show the area where I'm having difficulty.
What I want is a page that has everything down the center,
taking up no
more than 750 pixels and no more than 550 pixels of width. No
problem there.
After the header and the top content, I'd like to have two
"columns",
each in it's own separately-colored box. I would like the
right-side
column/box to be a static size, while the left-side
column/box sizes
dynamically.
Where I'm having problems is that when one column is boxed,
it's fine,
but whenever I wrap each column in its own box, the
fixed-size box
either jumps below or above the other box (depending on which
one has
been floated and which order the div's appear in the code).
Here are the links:
CSS:
http://www.afice.org/stylesheet/floatmestyles.css
ex 1:
http://www.afice.org/floatme1.html
ex 2:
http://www.afice.org/floatme2.html
Before sending, I took a look again, just to see if I was
missing
anything. I did notice that it doesn't seem to be that the
box is
jumping down so much as it is that it's getting written over.
Anyway, sorry for the long-winded explanation. I hope I've
managed to
explain what I'm trying to do well enough that someone can
tell me where
I'm going wrong.
Thanks,
--Kevin

Do you want something like this:
http://www.pmob.co.uk/temp/spointfooter.htm
You will need to look at the code to see how it was done.
Otherwise, there are different examples here on Pauls' site:
http://www.pmob.co.uk/temp/3colfixedtest_4.htm
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.perrelink.com.au
- Web Dev
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.adobe.com/devnet/dreamweaver/css.html
"Kevin D-R" <[email protected]> wrote in
message
news:[email protected]...
> Okay, I know I need to get up on CSS and get rid of
tables in my sites.
> However, I'm running up against a problem, and after
banging my head
> against it for a while, I realize I need help. I've
stripped this down so
> as to only show the area where I'm having difficulty.
>
> What I want is a page that has everything down the
center, taking up no
> more than 750 pixels and no more than 550 pixels of
width. No problem
> there.
>
> After the header and the top content, I'd like to have
two "columns", each
> in it's own separately-colored box. I would like the
right-side column/box
> to be a static size, while the left-side column/box
sizes dynamically.
>
> Where I'm having problems is that when one column is
boxed, it's fine, but
> whenever I wrap each column in its own box, the
fixed-size box either
> jumps below or above the other box (depending on which
one has been
> floated and which order the div's appear in the code).
>
> Here are the links:
>
> CSS:
http://www.afice.org/stylesheet/floatmestyles.css
>
> ex 1:
http://www.afice.org/floatme1.html
>
> ex 2:
http://www.afice.org/floatme2.html
>
> Before sending, I took a look again, just to see if I
was missing
> anything. I did notice that it doesn't seem to be that
the box is jumping
> down so much as it is that it's getting written over.
>
> Anyway, sorry for the long-winded explanation. I hope
I've managed to
> explain what I'm trying to do well enough that someone
can tell me where
> I'm going wrong.
>
> Thanks,
>
> --Kevin

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

Help with Recovery and Time machine

So a friend of mine sent me her laptop to change hard drives. She also sent her Time machine external HDD. I used her drive as a recovery disc using the Lion recovery tool. I didnt see or didnt read any where that stated the drive would be unusable afterwards. But after restoring OSX and moving her data back from the old drive I cant seem to get the Time Machine disc contents. So im trying to get the data from the drive without completely wiping it.
Any suggestions?
She has 13 (black)book late 2007
running 10.7.4

You should not restore a Time Machine backup from one Mac to another one, especially a new one.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Need help with Classic and OS 9.

I have searched on this issue and while I found a lot of posts I am still unsure what to do.
I just purchased some software that says it can be used on OS 8, 9 or X.
I have a G5 iMac running 10.4.3 and my wife has a G4 iBook running 10.3.9. Neither of us have ever used anything that has needed Classic before.
When we try to install the software we get a message that says:
"Classic cannot find a Mac OS 9 system folder on the startup disk to use."
I am confued that I get this message since the software package says OS X.
I assume this means that I need to install classic on our machines. Since she has Panther I believe there is Classic on her start-up disks but I have no idea how to use them or where to start. Some of the things I read says that I need to uninstall Panther or Tiger to install Classic.
For me (using Tiger) I don't think I have Classic on my disks. Can I use her disks to load Classic on my machine? Also, in looking at some Apple documents I found something called Software Restore.dmg that I downloaded to my machine but again, I don't know what to do with it. Does this contain Classic?
I have an external drive attached to my network via Ethernet and mounted on our desktops. I can't boot from it but can I load Classic onto that drive and just run it like an application?
Does classic take up a lot of space on the hard drive?
As you may have guessed, I am not that familiar with how to handle this and would appreciate any and all direction. If I have left out any critical information please let me know and I will post additional info. as needed.
Thanks.
David

Joe:
Thanks for the prompt reply. In looking at my install Disc 2 I found that I could install the OS 9 package and I got the software to run. Thanks.
As it turns out, all the software that I purchased did was install a bunch of Word and Excel templates onto my computer via Classic. I don't actually need the application any longer to use these templates going forward so my next question is;
How do I uninstall OS9 from my computer?
It appears I have several new folders in my Mac HD in Finder. They are:
Application (Mac OS9)
Desktop Folder (this is empty)
System Folder (the contents are about Classic and Classic Support etc.)
Would I just drag them to the trash to uninstall OS9? Are there any preference files I should delete?
Or am I best to just leave this in my system for possible future use? Having recently converted from Windows I am still of the mindset that I need to get off anything I don't really need or use.
Thanks again,
David

Day one of my new MacBook Pro & I desparately need help with calendar and email

It's day one of my new relationship with a Mac, and I need help! I'd like to use microsoft exchange to sync my calendars to iCal & my emails the way I currently do with my iPhone 4 and iPad 2. The problem is that all I get are error messages. They either say that communication with the server cannot be established or communication to ports 80 & 440 cannot be established. One account I'd an ssl and the others are gmail. Please advise!

anyone? please? i would appreciate any information.

Need help with GetStringUTFChars and JAB

Please help,
I want to use the JNI function GetStringUTFChars with JAB (Java Access Bridge), without having to call JNI_CreateJavaVM as no matter what I do, JNI_CreateJavaVM fails. I have JAB successfully loaded, and I have used GetAccesibleFromHWND to get a valid jobect. Is there any way I can go from the jobect to use GetStringUTFChars?
If not, is the source code availabe for GetStringUTFChars? OR is there an Windows/C++ equivalent available?

RPhilbrook12, you've reached the right place for information regarding how to suspend your line while you're deployed. Are you being deployed for military purposes? If you have received military orders to relocate for 90 days or more to an area where Verizon Wireless doesn’t provide coverage and you need to suspend your service, you can contact us at 800-922-0204. You will need to be prepared to provide information from your orders, including where you’ll be stationed and the name and rank of your Commanding Officer. Please be advised that your service can be suspended for up to 3 years for military deployment.
For more details regarding your options to suspend services, click http://vz.to/1lfmyUI
LasinaH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Hey guys i need help with facetime and i am ready to blow up!

I got some many ppl telling me that i have to pay for facetime! My dad got iphone 4 and we live in canada (calgary) My brother lives in Australia and i have mac! Is facetime free to talk to him! Telus is telling us that it will cost my dad 2 dollars a min then Rogers is telling us it is free! I need help cause if both have wifi it should be free! We want to know! Please let me know! thanks! I am ready to blow up here LOL!

All FaceTime calls are over WiFi, thus they are "free", unless you're using a WiFi hotspot that charges for its use.

Need help with LVM and Virtual Machine Manager

Similar Messages

Maybe you are looking for