Need help with mail after the "import" please

Hello.
I recently upgraded to 10.4. Since I did that, my copy of Entourage has been acting up, so I decided to start using Mail instead. I love it so far, but I imported all my folders and old e-mail into Mail, now it still continues to import e-mail from Entourage every time the program checks for e-mail. So, some gets put into the import file, and some of it goes into the inbox of the Mail program. I have three e-mail addresses setup in Mail, just like I did in Entourage, but it only seems to import one account. The rest seems to go into my inbox. I want that to stop, but I also want to make sure all my mail is being picked up by Mail and not Entourage. I haven't opened Entourage since I have set up Mail. What do I do to correct this. It's pretty annoying. Any help would be appreciated. Thank you.
quicksilver 867 MHz G4 Mac OS X (10.4.5)
quicksilver 867 MHz G4 Mac OS X (10.4.5)

you just go to file, import mailboxes and then select the program you want to have imported. i think you have to have that application opened. i don't know where the address files are stored, though. sorry about that.

Similar Messages

I need help with problems after the April 2015 update

In December 2015 I purchased an LG G3. It started out great. Then often people couldn't hear me..sometimes with the speaker on, sometimes with it off, sometimes on bluetooth with my car,.or my voice faded in and out, or sounded muffled or garbled. After over a month of these frequent audio problems and several calls to Verizon during which they boosted my signal and guided me through a factory reset which took all of my photos out of their albums, the final suggestion a few days ago (April 21, 2015) was to download the new software update. I did and I'm not happy with some of the changes e.g. I wish I could have the old home touch buttons back,The jury is still out on sounds quality, but now I have two new annoying problems.
The first is that my car and phone used to bluetooth (connect) as soon as I put my engine on. Now, every time I get in my car I have to go into settings and give the phone permission to have other devices find my phone. Then after one or two tries the bluetooth eventually connects them. I am a Realtor and I need my phone and car to connect automatically every time I get in. I can give the phone permission to connect for up to an hour, but then it goes off. How do I get the opton to stay on?
The second is that I often turn my data off, and I used to do it from the notification panel that I can pull down. I just pulled it down and tapped "data" and the light would go off if the data was off and on if it was on. Now when I tap "data" I can turn it on or off, but the data button stays lit so when the data is off the light is still on. No more quickly glancing to see the data status...I have to tap it and read the notice to find out. Yes, 3G or 4G light up in tiny letters at the top, but data is the only button that stays lit when it is turned off.
Am I missing the steps that would fix these issues?

SiBIMe,
I am sorry to hear of the issues with your device before and after the update. We want to restore the love back to your device. Please keep us posted on the audio issues to see if the update did assist with that issues.
In regards to the two new problems, we want to make sure we get this worked out. Do you have issues with the device only auto connecting to your car or all bluetooths? Do you receive and error message when the device doesn't auto connect and you attempt to connect manually but it fails? As for the data icon, when you tab on the data icon from the notification tab does the 4G actually disappear even thought the data icon is still lit?
Please test your device in Safe mode and let us know if you still experience the same issues. Here is how to place the device in safe mode. http://vz.to/1owbN8K
LindseyT_VZW
Follow us on Twitter @VZWSupport

Need help with Mail after 10.6.8 update

You can’t use this version of Mail with this version of Mac OS X
You have Mail version 4.5 (1084/1085). It can’t be used on Mac OS X Version 10.6.8 (Build 10K549). For more information, click the Help button.
OK getting desperate now, I recently updated my 2010 MacBook Pro (Running Snow Leopard) with the latest update, unfortuantly my mail icon was in a sub folder in the applications folder and apparently is the cause of all my problems as it looks like it didnt get the updated?
So I have been scrolling different solutions to try to find some sort of resolution, I have downloaded the Mac os X 10.6.8 update combo v1.1 but that hasnt done anything? I just simply opened it when i downloaded it, was I supposed to do something fancy with it ??
Totally lost as to what to try next anyone out there more computer savy that I am ?
mette

I had the same problem. I did this:
If you installed the Security Update 2012-004, it failed to update Mail to 4.6; thus, your problem. Manually DownLoad it fromhttp://support.apple.com/kb/DL1586 and reinstall it.
which was posted on another thread here: https://discussions.apple.com/message/19718708#19718708
and it worked .

Please i need help with switch from the us store to malaysian store how i can switch

Please i need help with switch from the us store to malaysian store how i can switch

Click here and follow the instructions to change the iTunes Store country.
(82303)

I desperately need help with Mail, specifically sending

For Starters: I am on OSX 10.9.2 and am trying to use mail 7.2.
https://discussions.apple.com/post!input.jspa?container=2998&containerType=14&qu estion=I+desperately+need+help+with+Mail%2C+specifically+sending
I cannot send. I have been at this for hours and hours and hours. Here are the details.
my mail server however is s1.sistercompany.net
I can receive email just fine. I can also send mail just find having set this up on my iphone and also in thunderbird (which i hate hate hate hate hate hate hate, which is why I am desperate to set up mail)
The settings in thunderbird are as follows:
Servername: s1.sistercompany.net
port: 465
Authentication method: normal password
Connection Security: SSL/TLS
However, I just can't get this to work in Mail. When I write an email and hit send I get a popup that says:
Cannot send message using the server s1.sistercompany.net
The certifcate for this server is invalid.
Now, my tech guy says yeah the certifacte is invalid because you are going through sistercompany server, there should be some way to just accept the certifcate anyway (but he has never used mail before).
So I have serached around and come up with this: http://support.apple.com/kb/PH11706
Which tells me to use the verify certificate dialogue, which I would do except there is no verify certificate dialog. Any thoughts?
<Email Edited by Host>

I don't have a problem watching the Lost episode on abc.com, using a stock MacBook with 512MB RAM. I don't know what technology abc.com uses in their viewer, but I have Flip4Mac and the latest version of Flash player installed.

I had to put my computer by together without migration or time machine I NEED help with order of the files?

I had to put my computer by together without migration or time machine I NEED help with order of the files?

Hi, where are these other files exactly?

Need help with Mail on my 701

Hello all,
I installed Microsft Office Mobile today from the 'Software Update' application on my 701.
Now, the apps work fine and since I don't need Lync, I removed just that.
Now, the 'Mail' icon on my 701 has mysteriously changed title to 'FreestyleEm...' and I can't read further.
Now there's no way to reinstall Mail, so I'm stuck. What should I do?
Solved!
Go to Solution.

I am using nokia 701, after belle fp1 update, first my mail exchange server stopped syncing mails,then the mail app was renamed to FreestyleEm, and I am not able to access my mails.Microsoft apps has disappeared, and battery is draining very fast.Please help me with this. When will this be fixed, the abhove solution didn't help at all. I just got this phone, and I am so dissatisfied with Nokia. Please reply.

Need help with mail sending mails..

Can anybody help me with a code that works perfectly for sending mails.. since i used many codes which are not working, so please help me with the code to send mails please or else with an example.

Hi kirupa_sankar,
To send mails to others you have to use javax.mail.jar file and sample code is
import javax.mail.*;
import javax.mail.internet.*; // important
import javax.mail.event.*; // important
import java.net.*;
import java.util.*;
public class Mail {
Properties props;
Session session1;
Message message;
boolean flag=false;
public boolean sendMail()
props=new Properties();
props.put("mail.smtp.host","mail.website.com"); // 'localhost' for testing
session1 = Session.getDefaultInstance(props,null);
String from= "[email protected]" ;
String subject = "testing mail(subjective matter)";
message =new MimeMessage(session1);
message.setFrom(new InternetAddress(from));
message.setRecipients(Message.RecipientType.TO,InternetAddress.parse("toaddress",false));
message.setSubject(subject);
message.setContent("content of the message");
Transport.send(message);
return true;
try this one you will get success....

Need help with Mail

Hi:
Need your help with something I don´t understand: we try to set up a new hotmail account in Mail (we have used both Preference Panel and directly in Mail) but it never recieves the Inbox. I can send but don´t see anything in Inbox.
I looked into User/Library/Mail/V2/accountname/INBOX.mbox/ and the folder with the xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx name structure is never created.
I tried to set up another hotmail account and it works ok, only this specific account fails.
I Used a Permissions repair, didn't worked. Erased all data in V2, again not worked. Tried to "cheat" Mail setting up another hotmail account and then changing info to the specific account failing, not luck. Also reset sync services (http://support.apple.com/kb/TS1627?viewlocale=es_ES), still not work. Rebuild inside Mail also didn´t worked. Any idea to get this account working?
BTW, sorry for my bad english...

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go â¹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

Need help with videos!!! Please

i need help! i have a 30G ipod video and my videos are being weird. They used to play on my ipod but now there is no picture or sound. it plays on itunes too so i dont understand. Also, my purchased music plays on itunes but skips past them on my ipod-they used to play on my ipod. PLEASE help me!

Welcome to Apple Discussions!
For Videos:
So what are they doing? Are the videos showing up under "Videos" on the iPod? What happens when you try to play them? Have you tried these?
Resetting iPod
Restore the iPod
For Purchased Music Skipping:
Have you played the songs in iTunes for a few seconds? This will authorize them. Now sync your iPod. Do they play?
If not, make sure everything is up to date on your computer and iPod..
iTunes
iPod Updater
Updating iPod's Software
If that doesn't work, in iTunes, go to advanced-->deauthorize computer. Now play the songs in iTunes. It will ask for your account information (from the iTunes Music Store). Enter that. Now play a few purchased songs for a few seconds. Sync your iPod. Do the songs work now?
If they don't, try this...
Deauthorize the computer. (Go to advanced-->deauthorize computer in iTunes)
Create a new user in the system. (Start-->control panel-->user accounts-->create a new account)
Download the free song of the week in the new user account. (First, log out of the current user and log in to the new user account. Then open iTunes and download the free song)
Play the song in that username to authorize it.
Restore the iPod in the New User account, sync just the Free song of the Week and see if it plays on the iPod.
If it plays fine on the iPod when syncing with this user name (after you followed the above instructions), it would indicate a bad iTunes Library File. Post back for instructions on how to fix that.
Now, if it still won't work (you followed the above instructions with the new user account) and the iPod still won't play the songs, then post back.
btabz

I need help with some simple code! Please read!

hi everyone.
I'm having problems with a piece of code, and i'd be extremely greatful if somebody could give me a hand with it. I'm totally new to java and have to make a program for my university degree, but i'm finding it extremely difficult, mainly due to my total lack of apptitude for this type of thing. I know this is easy stuff, but the books I have are no use so any help would be greatly appreciated.
I have to write a program which uses two class files. I want one with the code to produce a simple button, and one to invoke it several times at different locations. I decided to write the program as one class file at first, and thought i'd be able to split it up at later. The program works fine when it is one class file. My book said that to split the two classes up, all i needed to do was change the second class to public, although this seems to not work at all. I'm at my wits end on this, and if anyone could correct my code I'd be eternally greatful.
Here is the first class... (sorry about the lack of indentation)
>>>>>>>>>>
import java.awt.*;
import java.applet.Applet;
public class Phone extends Applet {
private Image image;
public void init() {
setLayout(null);
image = getImage(getDocumentBase(), "phone.jpg");}
public void paint (Graphics g) {
g.drawImage(image, 0, 0, 700, 530, this);
PhoneButton myButton;
myButton = new PhoneButton(20,20);
>>>>>>>
This is the second class....
>>>>>>>
public class PhoneButton {
private Button butt;
public PhoneButton(int a, int b, int c){
setLayout(null);
butt = new Button();
butt.setBounds(a,b,20,20);
add(butt);
>>>>>>>>
My compiler generates errors relating to Button, but i can't do anything to please it.
Also, could anyone give me some pointers on how to add a different number or symbol to each button. That is what I added int c for, but i couldn't get it to work.
Cheers in advance.
Michael Morgan

I found that there are 5 error in your code.
1. You should import the "java.awt" package to the PhoneButton.java
2. The PhoneButton is not a kind of Component. You cannot not add it to the Phone class
3. the myButton = new PhoneButton(20, 20) does not provide enough parameters to create PhoneButton
4. You cannot add a Button to a PhoneButton. Becaue the PhoneButton is not a kind of Container
Fixed code:
import java.awt.*;
public class PhoneButton extends Button {
public PhoneButton(int a, int b, int c){
setBounds(a, b, 20, 20);
setLabel(String.valueOf(c));
===========================================
import java.awt.*;
import java.applet.Applet;
public class Phone extends Applet {
private Image image;
public void init() {
setLayout(null);
image = getImage(getDocumentBase(), "phone.jpg");}
public void paint (Graphics g) {
g.drawImage(image, 0, 0, 700, 530, this);
PhoneButton myButton;
myButton = new PhoneButton(20,20, 1);
======================
Visual Paradigm for UML - Full Features UML CASE tool
http://www.visual-paradigm.com/

I need help with Mail

I recently erased my HD and reinstalled Yosemite. I wanted to manually move my saved emails over so I researched and it said to go to library/Mail/V2 and copy everything in there from the old system and paste it into the new system. I did this but got this message...
I don't know what this means. I should have gone online and asked, but tried to fix it myself. I thought if I deleted the gmail accounts and re-entered them it would fix it. When I opened Mail preferences, choose one of the two accounts and hit the "-" button, it gave me a message saying they couldn't be deleted and to do it from the system preferences, so I did that. Now Internet accounts in system preferences shows them as gone, but they are still in the Mail.app. I tried deleting them again from Mail preferences and it won't let me. I then tried to go re-add them to the system preferences and it will add a google account but says there is an error. I am fearful that I have really screwed my computer up. Please help! How do I add them back to my system preferences without errors and what do I do about the above pic of the message that keeps popping up in Mail? How can I delete the gmail accounts if I need to if Mail won't let me. I also haven't gotten a single new email in any of my accounts, including my iCloud and comcast ones since I did this all. What should I do?

Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
          8.8.8.8
          8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

Need help with mail on my Mini

I am really having a problem deleting mail off of my Mini
I have gmail as my server.
I open mail app on my computer. I also see the folders for gmail. I open the folder thats says all mail. I highlite several of them, go to mailbox, and select delete mail for all accounts. It does delete off of the screen, but if I go out of mail application , and come back in, what I have deleted is back on the screen for all mail in Gmail folder. I have also tried deleting it by picking gmail from the mailbox, and all mail on this computer, and nothing works. I looked backed, and have deleted mail still on my computer from two years or so. How do I get this deleted mail off of my computer

I am using nokia 701, after belle fp1 update, first my mail exchange server stopped syncing mails,then the mail app was renamed to FreestyleEm, and I am not able to access my mails.Microsoft apps has disappeared, and battery is draining very fast.Please help me with this. When will this be fixed, the abhove solution didn't help at all. I just got this phone, and I am so dissatisfied with Nokia. Please reply.

Need help with a Blackberry Curve 9300, please...

Hello, everyone, I had a look around the forum and came across a post which offered advice one what to include in questions, so I have tried to include the info below.
Device info
Your carrier: Unlocked (was using Virgin)
Model info and OS version (Go to Settings, then Options, then about): Blackberry Curve 9300, OS 6
Apps and free space
File free before and after a battery remove/replace. (Go to Settings, then Options, then status): 60%
Did a battery pull fix your issue? No
Apps installed and their version if possible. (Go to Settings, then Options, then applications): None, only the ones that come with it after reset to factory
BT device model/version (you will have to look at the BT device): Don't know what this means
When writing your question
Any other details that would help us out with your issue: This was my teenage brother's phone, which since has been given to me. The phone was severely mistreated; thrown around, stepped on and chewed. The battery had to be replaced as well as the middle chassis and the front and back cases along with the keyboard, bottom clip and screen.
Good description of what is really wrong and how to reproduce if possible. Details of what you did before: I managed to get it working after I had replaced everything listed above, but it will not charge using the cable. I have to keep taking the battery out and plugging it in seperately to charge, then putting back in the phone. This is after replacing the cable as my brother broke that too, so it's not the cable. He's damaged the data/ charge port.
The camera will not work, but at the moment I am not looking for a solution for that. The error is: "Could not start the camera. Close other applications and try opening the camera again". No applications are open and the OS has just been updated to the most recent version. For this reason, I think he's managed to break that too and it would need to be replaced if that's possible.
My issue at the moment... My mother, as you can imagine is furious with him for trashing the phone she bought him at about £250 when it was new a couple of years ago. So, as I have managed to get it to turn on and pick up wi-fi, she has said I can keep it. I am on Virgin Mobile and this phone is unlocked. It will not pick up any network even using my Virgin SIM card which works fine. My brother was also using it on Virgin.
I can use it with wi-fi and have already contacted t-mobile and Virgin Mobile to make there there's no problem with them. There isn't. The number has been put under my ownership and the phone registered to me now. It is not blocked or blacklisted, yet, only comes up with SOS for network.
Because of this, they and the local phone shop think he might have damaged the antenna inside. I am an iPhone user, this is the first time I have used a Blackberry, so I have no idea - can the antenna be repaired by myself?
Or, given that the camera doesn't work either/ needs replacing, would it just be better to get a replacement using my contents insurance? I am unsure which would be cheaper, to get the parts and try and fix it myself, or pay the excess for the insurance.
Advice appreciated... Thanks in advance.

Hey MaggzieP,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
This KB article will determine if it is a software or hardware related issue for the camera: www.blackberry.com/btsc/KB15544
Also if you tried more than 1 SIM card in the BlackBerry Curve 9300 smartphone and it still shows SOS, this could be hardware related as well.
For all repairs, I can only suggest checking with the point of sale or network service provider for further options.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Need help with passcode using the "Remote" app

Hello and thanks in advance. I can't find a place on iTunes to enter the passcode from the Remote app.

PLEASE READ!!!
I have a HP Pavilion - Windows XP
I need help as well with the passcode. I went to Networking and Sharing center and clicked customize and changed the name to NetGear because that is what it says next to my WiFi on my iPhone but with my iPhone under Settings it says WiFi NETGEAR > but when I click on it, it says choose a Network. Is NETGEAR a network? How do I find or change to a Network? is this the problem?

Need help with mail after the "import" please

Similar Messages

Maybe you are looking for