Need help with Multi-cam editing in Premiere Pro CC/7.0

I've been using 6.0 for a while now, and had to install 7.0/cc, but now I can't find where to record multi-cam edits. I've already lined up my clips and created a new sequence and enabled multi-cam, I just don't see the Multi-Cam Editor. Please help!

Hey!
I found the record-button in the programm panel. But now it won't let me hit record. The button is disabled (see screenshot).
What can I do about it?
If I just hit play and then change the angles in the source window, Premiere won't record those edits. Only thing it does is it keeps the whole clip in this one angle.

Similar Messages

Help with multi camera editing in Premiere Pro

Ok I'm new...so bear with me.
I am editing a basic interview shot on two cameras and cutting away to some still images.
The rushes are 4 lots of film about 10 mins in length.
I inputted the footage from the two cameras and created a new sequence for each using the multi camera audio synchronisation method (which worked great).
So how do I go about creating my edit? Something tells me I'm going about it in the wrong way.
Do I need to create my edit using single camera shots and then create multi camera sequences for each individual clip? It seems so laborious as its all already synced up for two cameras.
I am a bit confused about creating clips v creating sequences.
I'm sorry if this is making some of you cringe :/ ....but I really can't find any help in online tutorials.
I need basic step by step instruction.

I am editing a basic interview shot on two cameras and cutting away to some still images.
The rushes are 4 lots of film about 10 mins in length.
I inputted the footage from the two cameras and created a new sequence for each using the multi camera audio synchronisation method (which worked great).
So how do I go about creating my edit? Something tells me I'm going about it in the wrong way.
Do I need to create my edit using single camera shots and then create multi camera sequences for each individual clip? It seems so laborious as its all already synced up for two cameras.
humm, sounds like your 4 lots do not overlap in time, and that there is space between each lot. So would that be 4 multi-camera sequences with the two cameras?
If so, why even multicamera edit that? and just set up to Video tracks, sync the audio and opacity keyframe between the two tracks.
Good to get your multi-camera edit workflow going proper though.
Sounds like you need to multi-camera edit your 4 sequences separately, unless you sync each lot with its corresponding clip and put on the same timeline, then do one sequence and one multi-camera edit

Novice needs help with multi-cam

Hi, I've got 3 cameras and a seperate audio track synched in my timeline. (CC Premiere Pro 6 on a PC with - unfortunately, Windows 8) The cameras didn't all start at the same time but no problem the clips are where they need to be now. I've made several edits getting rid of stuff I don't need, and I've added a title, end note, and a few stills. All the tutorials I've watched deal with starting clips at the beginning but I can't seem to find one that shows what to do with a bunch of things already in the timeline where they need to be. Here's a screen shot if that helps to explain what I've done so far.I've tried nesting the clips and dragging that into the source panel, but no luck. Obviously, I'm missing something here (this is my very first project) hope someone can help.

Yes, what Jim said...
or if you really want to leave all your little stills and titles there and not have to add them later then alt+select all the video clips only and right click>nest. You can select all the audio clips too but I usually leave them there so I can see them all individually (personal preference) and I never have audio follow video in my edits so it's not necessary. Then right click>Multicam>Enable and proceed with #3 from Jim's list. I actually prefer to ignore the wrench and add that one touch little multicam toggle icon to the program monitor which it appears you've already done so you just need to select the far right icon on the bottom of your program window next to the little camera icon. That's the multicam toggle. Multicam cutting now takes place in the Program Window instead of the Source Window like it was in CS6. Oh also, the little "tweaks" that Jim mentioned can be easily done with the Rolling Edit Tool (Shortcut: N) You'll see. Good luck!

PLEASE help with multi-cam edit issue (head about to explode...)

PLEASE believe me when I say I've watched 20 YouTube videos on the subject, read the manual, reinstalled FCS on a new machine (in the event that the install or my last MBP was at fault), etc., etc....
JUST can't get FCP to make the cuts for me when I click on the angles in the viewer.
Despite making a multi-clip, open synch, green/blue boarder for audio/video angle and blue boxes for video only, rendering, etc., the same thing always happens...
When I hit the space-bar, making all the angles play @ same time in the browser, and then I click on an angle to make a real-time cut, the in-point of the selected angle pops onto the canvas (a still frame) and everything STOPS.
Happy to describe any other details; can begin to tell you how stoked I'll be if I can get past this...
(I've been reduced to trying to use iMovie to cut this 3 angle live-music performance video, which is taking HOURS for a single song...with terrible results...)
:-/

Starting over:
1) Import 3 .dv clips (all same frame size, vid rate, compression, etc.)
2) Create new bin for footage, assign angle numbers to clips
2) Add in-point for synchronization
3) Make multiclip (and synch in-points)
4) Double-click on multiclip (and it then shows in viewer)
5) Press "overwrite" to bring multiclip into timeline
6) Open playhead sync
7) Assign blue and green 'boxes' in viewer (audio/video, and video only)
8) Click into timeline, make sure playhead is to the front of the sequence
9) hit space bar to start editing.
10) NOW, whenever I click on an angle in the viewer to make an edit, playback stops and a still frame for the selected angle shows in the canvas.
ANY THOUGHTS??

TS2771 I need help with my camera it's shows a black screen. And I have restarted it many times

I need help with my camera it's shows a black screen. And I have restarted it many times

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Y are not alones. Sometimes the camera fails.
Apple Retail Store - Genius Bar

Multi Cam Flicker Issue - Premiere Pro CC 2014

Multi Cam Flicker Issue - Premiere Pro CC 2014 can any one help me pls

Hi,
This might help :
Go to File > Project Settings > General and change the Video Renderer to Mercury Playback Engine software only. Click OK and select Delete Previews.
Thanks,
Rameez

I am a beginner in Labview and need help with multi-device synchronization.

I am using a VI I found in order to continuously acquire and write voltage. The next phase is to somehow synchronize this with a linear platform and am wondering if there are any tutorials on how to do this out there, or if anyone could give just general advice. I'm not necessarily asking for explicit details on the code but rather where I would be able to improve my skills in a way that would help with this project. Thank you in advance.

Hi riraheta,
Are you using daq? Can you tell me more about this linear platform which you want to synchronize? What operation do you plan to synchronize?
There are some examples online which has to do in synchronizing devices, depends on what you're planning to synchronize. The following are the few I have found.
Links (Presuming that you're using DAQ devices):
Synchronize Continuous Acquisition of Multiple Analog Devices (login required)
https://decibel.ni.com/content/docs/DOC-12182
Easily Synchronize Your Measurements in LabVIEW 2010
http://www.ni.com/white-paper/11549/en/
Application Design Patterns: Producer/Consumer
http://www.ni.com/white-paper/3023/en/
Application Design Patterns: Master/Slave
http://www.ni.com/white-paper/3022/en/
Timing and Synchronization Features of NI-DAQmx
http://www.ni.com/white-paper/4322/en/
Or you can search it from your NI Example Finder (Open LabVIEW >> Help >> Find Examples... >> Type in the keyword of your interests)
Hope it helps
Warmest regards,
Lennard.C
Learning new things everyday...

Poor multi-camera performance in Premiere Pro CS6

I've been trying to edit my camera footage using multi-camera window and the playback is extremely choppy and slow in the viewer, so I pretty much cannot use it. Any ideas? Are there certain settings I can tweak?
I did a search and it seems like the CPU/GPU would be the bottlenecks but I believe my machine is pretty good: i7 2700k with SATA III SSD, GTX 480 and 16GB of RAM.
Thank you in advance for your help.

What driver are you on for your GTX 480?
I'm aware of a number of things that have been reported as causing choppy playback
Playback Resolution and Paused Resolution being set to full. If that's the case, try dialing back to 1/2 or even 1/4.
A high number of layers. How many are in your multicam sequence? Also, do you have any cases of a sequence containing a nested sequence that in turn contains a nested sequence?
The type of video--some are more resource intensive to decode than othters. What kind are you working with (codec and wrapper)?
Using multiple graphics cards
Effects. Which ones are you using, if any?
A slow hard drive, or using an external without a fast enough interface. (from the info you provided, that doesn't sound like a likely culprit)
It might be worth downloading the trial of Premiere Pro CC to see if performance is better in the new version. I'm not trying to sell you on subscribing to Creative Cloud. It would just be good to know if you find better performance in CC.

Budget €2300,- Need advice with laptop hardware for AE, Premiere Pro CC/CS6

Hi Folks,
These are some specific questons so if one of you have purchased or upgraded their laptop recently could know some of these things. Otherwise, any informed idea is really appriciated.
I'm planning to purchase a production laptop specially for AE and Premiere Pro.
I've come to understand that my budget allows me to have a nvidia Quadro M3000k. I guess you guys understand why I focuse
on the video card. My reasoning is: finding a machine with 3rd gen core i7, 16 or 32gb of ram, 1080p screen etc is quite easy in todays machines.
But I'm sturggeling to find one with the right, and affordable video card. My budget is arond 2300 euros btw. Give or take a 100.
So:
- Concidering my 2300 euro budget, do any of you know a good machine to suggest? Besides what I mentioned above, I'm looking for one where I can put 32gb ram in.
- In the link below, nvidia itself suggestes some laptops, I ended up with the HP EliteBook 8770w (it may seem quite cheap for my budget but unfortunately me living in Holland means by the time it has been imported and all the taxes paid, the price will be quite a bit more) and Dell Precision m6700 (this one is around 2300 euros in Holland).
http://www.nvidia.com/object/mobile-workstation-notebooks.html
- And am I failing to concider some other important feature folks?
Thanx in advance
Umyd

Thank you folks very much.
Waw I was already searching for a machine with a quadro video card for two days before I consulted you guys and I'm so glad I did!
This is where I ended up now: Alienware M17x
http://configure.euro.dell.com/dellstore/config.aspx?oc=n00w7m01&model_id=alienware-m17x-r 4&c=nl&l=nl&s=dhs&cs=nldhs1
It has a 2GB GDDR5 NVIDIA® GeForce® GTX 680M. Which will make it cuda capable(?)
It does have eSATA port and usb3.
It just seemed to have only two slots for hard drive. Unlike some "worksations" that have 4. Is this problematic?
For hard drive I chose 128GB mSATA Boot Drive + 750GB 7,200rpm SATA 3Gb/s. Plus the eSATA and usb3 ports, it should be fine. Shouldn't it?

Need help with foscam cameras connecting to AirPort Extreme N

Greetings,
I could really use some help from the AirPort gurus! I have an AirPort Extreme N base station, with firmware 7.4.2. I purchased a couple of Foscam FI8908W pan and tilt cameras. I am trying to get them to work on my home network, but cannot figure it out. Personally I think it might have something to do with port forwarding, but hec I just don't know. I have tried searching for answers, but came up empty. Here is a copy of the manual for anyone if interested <http://idisk.mac.com/wheelchairguy-Public>. I have been using VMware with XP to try and setup the camera, but the camera is not found with the IP Cam setup software. I thought I might be able to directly connect to my computer with an Ethernet cable, but no go there either. Also no go with an ethernet cable plugged to the camera into the base station. I just have no idea where or what I am doing wrong. If anyone can help me, I would be very grateful.
Thanks,
Mark

Hi OneCog,
We're also have broadband connected to TimeWarner. When I first got the camera I tried the same thing and had the same problem. I never read the docs and assume plug and play. So I just plugged the ethernet cable from my laptop to the camera directly and of course my laptop was connected wirelessly to the internet. It doesn't work that easily and don't worry about the cable modem, you never have to touch it's settings.
I went to the http://foscam.us website and found these instructions that actually worked:
Foscam IP Camera Instructions
Software Insallation:
Install from the Cd the IPCamSetup.exe file OR
Or download the IPcamsetup.exe file from the website Foscam.us
a) Go to the website Foscam.us
b) Click the tool & support section (top middle section)
c) Click on Download IP Camera Tools (for FI8908W or FI8904W)
d) Click on IPCamSetup.rar (bottom left corner)
e) Click on IPCamSetup.exe
You should now have an IP Camera Tools Icon
Hardware Installation:
Plug the Ethernet network cable(grey wire) into the camera then into the router
Plug the power adapter (black wire)into the camera and then into the power outlet
Opening the Camera:
Once` plugged in correctly, double click on the icon IP Camera Tools
The Camera’s IP address will appear, double click on it to open the camera
(If “subnet doesn’t match” appears , double click on it and check the box ’Obtain IP from DHCP server’ then click on OK)
Login to the Camera:
User: admin
Password: (leave it blank)
Click Login button
NOTE: Press the first Login button if using internet Explorer or other browsers OR
Press the second Login button if using Firefox, o r Google Chrome
Test to see if working:
Click on “Live Video”
Connecting Camera to Wireless:
Type your router Ip address unto your browser( press enter)
(Don’t know your router IP address? SEE: Finding your router IP address)
You may have to login or give your password. Do so.
Under the word Wireless(on left) find ‘Channel and SSID’
Click on ‘Channel and SSID’ write down(on paper) the SSID name
Click on ‘Security” and write down Security type, Authentication, Encryption Technique and Pre-shared Key information
Login back to the camera
Double click on Ip camera tools
Double click on camera’s Ip address
User: admin
Password: ( leave blank)
Click the correct Login button for your browser
Click on ‘Device Management’or ‘For Administrator’
Click on ‘Wireless Lan Settings’
Type in your SSID, Authentication Encryption technique and Pre-shared key info that you wrote down
Press Submit
Then wait 30 seconds
Disconnect ethernnet network cable from the camera
Disconnect the power plug from the camera
Reconnect the power plug to the camera ( do not reconnect the network cable wire)
wait till camera stops moving
Login back to the camera
a)Double click on Ip camera tools
b)Double click on camera’s Ip address
c)User: admin
d)Password: ( leave blank)
e)Click the correct Login button for your browser
15. Chec k to see if camera is working by clicking on to ‘Live video’
Connecting your Camera to the Internet
Write down the local IP address of your camera
(To find this address open IP Camera Tools)( it will display the IP address of the camera as htpp://[YourCamerasLocalIPAddress])
Write down your router’s external internet IP address
( The easiest way to find this would be to Google “What is my IP address” and go to the first link which pops up and that is usually whatismyipaddress.com)
Log in to your wireless router
To do this you must enter the IP address of your router into your browser(enter)
and then enter the username and password when prompted.
( If you are unsure of the ip address or username and password of your router, SEE Finding your Router IP Address )
Directing incoming connections on your external IP address to your cameras local IP address
a)Go through the options( on left side) find ‘DMZ’
b)Click on DMZ
c)set the DMZ IP address (also called “private”/”local” IP address”) to your cameras
local IP address(by changing the last component of the number to the last or last
two digits of your cameras IP address)
d)Select enable option
e)Save by clicking ‘Apply Changes’
OR If you have more than one camera
a)click on “Virtual Server” or “Port Forwarding”
b) set the inbound port to 80 and the outbound port to 80
c) Save by clicking ‘Apply Changes’
Test it to see if you set it up correctly
open a browser and enter your external internet ip address into the address bar and press enter
You should arrive at your camera’s login screen if you successfully connected the camera to the internet
NOTE: Please keep in mind that the camera’s IP address and the Internet’s external IP address can change at any time. Check and make sure that the IP addresses haven’t changed. If they have changed, use the new IP addresses.
Finding Your Routers IP Address: (Internal)
Refer to your router’s manual OR
Retrieve your Routers Ip Address from Ip Camera Tool software
Double Click on your IP Camera Tool Icon
Then left click once on your Camera’s IP address
Right click on it and choose ‘Network Configuration’
The ‘Gateway’ number is your router Ip address ( write it down) OR
view a list of default router IP addresses, usernames and passwords
by Google searching “default router IP addresses”
and clicking on the PDF titled “List of default Router Admin Passwords and Default Router IP” at: http://www.answersthatwork.com/DownloadArea/ATW_Library/Networking/Network__4-List_of_default_Router_Admin_Passwords_an d_IPaddresses.pdf
Go to ‘find’ and type in the brand name of your router (press enter)
Write down your routers IP address
Message was edited by: dollarbrand

New logic user, need help with multi-channel inst and aux strips.

Greetings all,
So I just purchased a new Mac Pro 2.66 and Logic Pro 7 to run with it. I have been a long time Nuendo/Cubase user on the PC side of things but since I got the Mac I wanted a DAW that was supported fully for the apple platform.
Anyways, its a world of difference and I am very confused as I wrap my head around the learning curve, so in the meantime I have one important question maybe some one could help me with.
The question is regarding Aux channel stips for Multi channel instruments. In this scenario I am working with Battery 3, it took me a while to understand that I actually needed to create these aux channels just to have seperate outs in Battery which seems really wierd and overly time consuming.
As an example in Nuendo once you create the instance of Battery, the audio mixer automatically just creates the corresponding stereo and mono channels instantly. This obviously makes is a sinch to assign Batteries pads to seperate outs for eq/comps for seperate sounds.
Now the Battery manual doesnt even make a reference to Aux channels for assigning outs in Logic, I actually had to do a Google search to figure this out.
Anways, sorry for rambling...
Here is the main issue.... How can I quickly and easily create multiple Aux's? In the mixer there is really only enough room in there to add like 1 more Aux strip, if I want to add more than that I need to re-arrange the entire global mixer which seems like a crazy system, surely there must be a more convenient method for getting muti-channel audio instruments set up quicker.
Any help you can assist with would be exceptional!
Thanks in advance.

Not sure what exactly your question is, especially since I don't use battery. But as far as creating aux tracks:
• go to the audio layer of the environment (not the track mixer window), find the two defalt aux tracks
• Highlight all tracks to the right of the aux tracks (these should be bus and output tracks), and drag to the right far enough to fit in a bunch of aux tracks; you might even want to drag the all underneath the aux tracks, if your screen accomodates
• use the key command shift-command-a multiples times to create several new "audio objects", and double click each one to expand
• highlight all the new objects and select options/clean up/ align objects (makes it look nicer)
• still highlighted, over in the parameters section (left side) select a channel, setting it to the highest number aux (at this point, probably "aux 3")
• now individual set the channel for each aux track – you'll see that now you have available "aux 4"; next time you set a successive track you'll see "aux 5" and so on
• once you've got things set up the way you want, save it as a template so you don't have to do this again later

Need help with Vietnamese Text in Adobe Premiere CS4

I just switch from PC to Mac and using Adobe CS4 to edit. Most of my client required Vietnamese Text for their wedding movies. On PC is very easy to type vietnamese text right on Adobe Premiere titles but in Mac is not. Anyone knows how to type vietnamese text in Premiere on Mac Please help. Thanks very much

Try resetting your preferences.
Easiest way I know is just delete the entire Preferences folder. Make sure PP and AME are both closed.
If you have workspaces you want to save - not have to rebuild - then drag the entire Prefs folder out of Program Files.
When you restart PP it will build a new prefs folder. You can then - one by one - import the saved workspaces from your old Prefs folder (and whatever else you want).

Need help with multi-mapping

Hello! I need to develop scenario like in blog: /people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
but I need to have sets of records. For example, I have 9 "Element2" records in original message.
So, I need to have 3 messages, each contains 3 records of "Element2".
How can I do this?

Change the occurance of target message type to 0..unbounded in Messages Tab in mapping for 1:n mapping.
Mapping for Piyush_msg_out_3 target node-
Element2 (source)-> Index(increment 1) -> Divide by Constant (3 in your case) -> Floor -> Split By value(Value chnaged) -> collapse contexts -> Piyush_msg_out_3
Change the occurance of Element2 node as 1..unbounded in target data type.
Mapping for Element2-
Element2 (source)-> Index(increment 1) -> Divide by Constant (3 in your case) -> Floor -> Split By value(Value chnaged) -> Element2(target)
Edited by: nagarjuna _s on Nov 5, 2009 7:41 AM

Need help with multi track/simultaneous recording

Please forgive me if the answer to my question has already been covered; I have searched the other posts but haven't been able to find the answer.
I am recording a podcast with a Behringer Xenyx X1832 mixer. In GB I know how to select "multi track recording" and set my two mics that are conneced to the first two channels of the mixer to "mono 1" and "mono 2" on the input source.
My question is how do I record audio from my Macbook on a seperate track?
I have a Focusrite 2i2 connected via USB to the Macbook acting as an output, then TRS cables from the outputs going to channel 7/8 on the mixer. When I play audio I can hear it perfect and adjust EQ and volume, but I am unable to record it on a seperate track on GB.
When I click on the track on GB, the input source says "stereo 1/2" and when I try to click the red buttons to arm the other two mono tracks where my mics are connected it says "The input channel of this track is already in use. To record on this track, choose another input channel."
What am I doing wrong? How do I send audio from the Macbook to the mixer and then record it on a seperate track, along with seperate tracks for each of the mics?

You need to create an aggregate device:
http://support.apple.com/kb/HT1215

Need help with no camera sounds & recording in Captivate 5

I am an experienced user of Captivate 3 & 4, but I'm having lots of problems with Captivate 5. I am working on a Windows 7 OS and have just installed Captivate 5. When I try to record I can't get any camera sounds, even though I have changed my preferences to show them. Also, Captivate seems to be recording erratically, and sometimes it is catching actions, other times it isnt' I am running the program as Administrator and I am very puzzled by this. Normally Captivate has worked like a charm out of the box. Now it seems to be fighting my every step of the way. Am I missing something?
Audio recording seems spotty too. Sometimes it works just fine, other times Captivate just hangs and doesn't really record any sound.
Any help would be appreciated/

Hello and welcome to the forum,
First to be sure: did you install the patch released in December (Help, Updates...)? If not try that first of all. You can find details about the issues solved by this patch in this blog post:
Patch for Captivate 5
If this doesn't help, try to clear the cache (Preferences, Global).
Perhaps (not sure) your Preferences folder has become corrupt. It so, try to find it. In Win7 normally it is a folder (Captivate 5) in this path:
\users\<username>\appdata\local\adob
Maybe you will have to change the settings to make this folder visible in Explorer, by default it is in a system folder and invisible. You can delete this folder (while CP is closed) and when you restart CP a brandnew one will be created.
Lilybiri

Need help with Multi-cam editing in Premiere Pro CC/7.0

Similar Messages

Maybe you are looking for