Need help with my dvd burner
i have a hp dv6 laptop.. it would not play any discs or burn them.. i replaced it with a TSST corp CDDVDW TS-L633M 0200.... so now i can play movies, cd's, ect.. but it will not burn cds... i ran a check on it.. and it said theres a write error.. then i did it again and it said it was fine... can anyone help please!
Go to BIOS and set your IDE configuration, try this one:
For Native Mode:
ATA Configuration: SATA Only
S-ATA Keep Enabled: Yes
P-ATA Keep Enabled: Yes
PATA Channel Selection: Both
Similar Messages
-
Need Help with External DVD Drive on my iMac
Hi, This is my first post and I hope there is someone out there that can help me. My PC just died and I'm finally moving on and taking it where it belongs, the dumpster. Anyways, I've been using my Pioneer DVD burner in there and now I'm trying to use it on my Intel iMac. When I hooked it up using an external firewire case, this is what shows up in my profiler.
PIONEER DVD-RW DVR-110D:
Firmware Revision: 1.41
Interconnect: FireWire
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Even though it is Apple supported, nothing mounts and it cannot burn anything in iTunes, Toast, etc. Can someone out there help me out.
Thanks in advance!
Montri - THAIICEApple Discussions!
Since you have an Intel, you will need to repost in the Using DVDs and CDs with your Intel-based iMac Forum so that users using the same model computer as yourself will be able to help you.
This is the G5 iMac Forum. -
Need help with my DVD-ROM and Burner
I’ve got a 875P Neo FIS2R, Sony DRU-510K Burner and a LITE-ON 16X DVD ROM. My LITE-ON drive is set to secondary master and my SONY burner is set to secondary slave but for some reason is the POST report it does not show my DVD drives. In windows XP it also does not show any of my drives. I have a 120 GB Maxtor 6Y120M0 SATA drive which is showing up in the POST report.
Please I need this to fixed up ASAP
If any one has any ideas the please reply
ChaturaGo to BIOS and set your IDE configuration, try this one:
For Native Mode:
ATA Configuration: SATA Only
S-ATA Keep Enabled: Yes
P-ATA Keep Enabled: Yes
PATA Channel Selection: Both -
Need help with cd/dvd drive problem.
I have a MacBook (black) running OS 10.6.8. The internal cd/dvd drive no longer works. I put in a disk and it gets pushed back out after a few seconds.
I just bought a LG Ultra Slim Portable DVD Writer model GP 60NB50. The MacBook recognizes the LG drive for opening music and movies, and for burning photos to a disk.
I have been unable to use the LG drive as a start-up drive. I put Disk Warrior into the drive and restarted the computer holding down the “C” key. When the computer starts to launch there is a flash of a “?” on the screen then it loads from the hard disk. I also tried using the Apple start up disk that came with the computer but that also failed.
Any idea how I can get the LG drive to become a start-up drive when needed?
Thanks,
OrinIf your computer is a TouchSmart, and I am only guessing that it is, this document might help.
Good luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01496336&tmp_task=solveCategory&lc=en&dlc=en&cc...
GeorgeFN
I work on behalf of HP. -
I need help with my DVD drive.
After 4 hours of wandering around the net and not finding anything of use, I suspect I am posting on the wrong board. But hopefully somebody will do whatever is necessary to get this in the right place.
Long story short, my Satellite A215-S4817 DVD drive is being a bit temperamental, it can read and burn DVD-R's but can't read retail DVD's. The OS is Vista if that helps.If you use toast make sure on the left, it is selected to PC & Mac
If you use Popcorn and it automatically compresses.
Both of these softwares will read and copy at the best speed It is all automatic.
There are several things that might affect your process, It depends on if you are copying DATA, AUDIO, MOVIES, and if you are using ripping software.
Cheers Don
One last thing, Not all players will read newer Formats
http://www.videohelp.com/dvd.htm -
Need help with watching DVD-R from dubbed VHS
For some reason when I try to play a DVD-r that I recorded from a VHS tape, it will not play. I get the message that the disc is empty and yet I know it is not because it will play in the DVD player
Hi @Rod64,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I would be happy to assist if needed, as there are many models of HP Pavilion Notebooks. I would need the Model number.
How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Need help with putting DVDs on itunes
Does anyone know how to put personal DVDs onto iTunes so they can be moved to my iPod video. Any help would be appreciated. Do i need some type of compression software. Exact details are needed.
Dell D800 Windows XP ProSearch this forum for something like "DVD rip". You'll find a number of threads covering this topic.
Regards. -
I need help with puting dvd's onto my ipod
hi. I am having trouble putting dvd's onto my ipod. I checked the other topics about this but they didnt help. i downloaded Total Video Converter and Videora pod Converter but i dont know how to use them. Whenever i use Total wivdeo converter, i open up the dvd and i click convert but a screen comes up saying "i want to try it more" so i click that then the desktop window comes up. this is where i get lost.
(if you don't use these two syystems, then please tell me what you use.)
Thanks for the helpno... what im askinhg is for help on how to put dvd's onto my ipod. i was sayying that that was how i was told to do it but if anyyone does something else... then i would want them to post here.
-
Need help with my Pioneer dvd-rw dvr-115d. HLEP!!
Hello i need help with my G4, i havent been useing it for a while and i started using it again. As i was trying to burn a DVD it didnt read my cd at all even if i put a DVD in there it dont read it just come right back out.. on my mac it shows that is there but not reading . what can i do????!!! i need help with this..
PIONEER DVD-RW DVR-115D:
Firmware Revision: 1.18
Interconnect: ATAPI
Burn Support: Yes (Vendor Supported Drive)
Profile Path: /Library/DiscRecording/DeviceProfiles/PatchBurn-pioneerdvdrwdvr115d.drprof ile
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds
this is what it say in the system profiler.
Power PC Mac os x 10.5.8The new user account didn't work?
Or, the firmware flash didn't work?
I would try reconnecting the data ribbon. It is cramped and difficult to get to, but it may be some corrosion or a poor connection causing the issue.
It's worth a try, as the DVR-115 is a good drive. They don't make them any more........
You can find an optical drive installation video (on the following page) to help you with your efforts:
http://eshop.macsales.com/installvideos/ -
HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5
Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questionsAll the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer. -
Need Help with Inserting Timeline Markers
Friends,
I have not use my premiere element 3.2 since 2008 and forgot some of the procedures. now, I need help with the insertion of Timeline Markers. I did what the Help Page showed me. But the markers were not effective in the resulting DVD, or, even when viewing the video in the editing page as if thye were not there! Here is what I did:.
1) Click the Timeline button.
2) Click in an empty space in a video or audio track in the Timeline to make the Timeline active and deselect any clips.
3) Move the current-time indicator in the Timeline to the frame where I need the marker.
4) Click the Add Marker icon in the Timeline to place the Marker 5 times where I want them.
5) Verified that each Timeline Marker is present at the intended place.
6) Burned DVD
7) Can NOT jump to any of the intended Marker in the Resulting DVD during playback.
The question is "What did I do wrong or didn't do?" It seems that I did the same before and worked! Please advise!
Also, what are the significance of the Red line just below the Timeline and the yellow bars inside the video and audio frames. But after preforming Timeline/Render Work Area, they were all gone? What purposes do they serve and what is the significance of Rendering? Thank you for your help!
I repeat the process and did a Rendering before making the DVD also. It did not help!
Andy LimSteve,
Long time no talk! You used to help me out many times when the PE-1 through PE-3 came out. I was HOPING you would still be around and you are! You came through again this time! Many thanks to you.
I use the Add DVD Scene button to insert the Markers. They are Green. Made a DVD and the markers work OK although ythey are "effective" during play back using the editing window.
While that problem was solved, will you come back and answer the other two questions concerning Rendering and the Red/Yellow lines? I would appreciate it very much!
Andy Lim
~~~~~~~~~~~~~~~~ -
Does macbook 1.82 GHz comes with a dvd burner?
does macbook 1.82 GHz comes with a dvd burner?
and how many gigs of hard drive does it have?
erm.does its firewire runs well with a firewire
for a canon XL-2 dv(firewire) cable? please help me guys,
im considering bout buying a macbook =)
and oh ya the most important question.
is this white macbook,1.83 GHz,60 gig good enough to
run windows and mac both?will macbook crash due to
insufficient memory and insufficient hard disk whatsoever.haha
i need ur help =)) pleases and thank yew =DMacBook white 1,82Ghz shipping with Combo Drive (only CD burner), 60Gb HDD and 512Mb memory.
And yes, you can run windows on that machine without any problems, but it will be much better to upgrade memory to 1 or 2 gigs for much better performance. -
Need help with Airport Express and so on.
Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection. -
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
Need help with upgrading my OS from 10.5.8
Need help with upgrading my OS. I havent upgraded the OS since I bought it and have version 10.5.8. Now I cant download Mountain Lion- or even Snow Leopard. When i downloaded the first version of SL- 10.6.1 it says i have to have 10.6 first and I cant find that.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple withdrew Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs. You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
UPDATE:
OS 10.6 Snow Leopard is once again available from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759
Maybe you are looking for
-
Appending ns1: in Every field[MAPPING PROBLEM]
Hi All, I am facing a strange problem when generating the output XML file. The file is generating in XML format with an additional ns1 in each line. Any idea on this guys. <b> <ns1:iABC xmlns:ns1="http://www.ABC.com/xmlschema/ABC/"> <ns1:header>
-
We are not able to see some document numbers for a customer ....which has some Bill of Exchange transcations.... We have discoverd the reason why is it happening... i.e. according to 136754 BSEG-DISBN, bill of exchange usage, should be a space, which
-
Hi all, I have the following xml: <?xml version="1.0" encoding="UTF-8"?> <ns:PayLinkV1 xmlns:ns="urn:basf:sa:fi:cash"> <payRecord> <recType>PAY</recType> <countryCode>032</countryCode> <payFlag /> <filler /> <invoice> <rec
-
No animations in rehearsal mode?
I can't see my animations and transitions in rehearsal mode. Is this normal? If not.... any suggestions? Thanks Powerbook G4 Mac OS X (10.4.8)
-
Live Pro- program not responding
Since I purchased my web cab on the 26th, it was working great. On the 29th, all of a sudden, the program will not respond. I have tried to uninstall it and reinstall it but that did not work. Any suggestions?