Need help with my RAID Utility
I got my battery replaced about two weeks ago and now I am getting this in my RAID Utility. Any ideas? I really don't want to have to carry this massive thing back to the apple store!!
That problem is probably not related to the battery.
It appears one of your drives suffered an error or was not responsive enough, and was declared unsuitable to continue. The RAID was changed to Degraded, and must now be rebuilt from the good drive(s) remaining.
This can occur when a drive is flat-out dead, but it also occurs when a non-trivial data error occurs, that requires more than a few retries (which takes too long and the RAID Driver gets impatient and degrades the RAID).
You can try erasing the errant drive, and re-adding it and allowing the RAID to rebuild (often all all-day process). Since new data will be supplied, any latent errors will be over-written and "fixed up".
If this happens again, do not continue to fiddle with it. The drive should be replaced -- although that drive may be re-purposed for lighter-duty work such as Backups after being Zeroed.
EDIT:
In a production environment where lots of drives were on hand, this would be counted as a failure and the drive would be replaced. The failed drive would be completely wriiten with Zeroes, and if it passed, would be re-purposed for use somewhere else.
Google did an enormous research study on their server farms, and concluded many drives that encountered errors would end up testing bad and being replaced within 6 months (of continuous use).
Similar Messages
-
I'm working with 1080i HD footage (captured from a Canon HV30) and output through an Intensity Pro PCIe card to a 1080p display while working on Final Cut Studio 2. I have two separate monitors outputing 1920 x 1080.
I'm working on a 2.8GHZ Quad-Core Intel Xeo Mac Pro with 10GB of RAM and a 320GB Hard Drive. Quicktime stumbles over 1080 footage from FCP, skipping frames, so I need to stripe some drives, internally if possible (there's three slots available for drives).
I already own an additional 1.5TB SATA hard drive, and am wondering...
What size drives would be ideal to handle 1080 footage? Would 500GB drives be enough, 1TB, or 1.5TB? Should the drives all be the same size?
Do I need a PCIe card to stripe these drives together or is the OSX Disk Utility sufficient?
Will I need to stripe three drives, or is two sufficient? Should I stripe together the main drive too or stripe the drives separate from the main hard drive?
Help on any one of these questions would be appreciated. Thanks for reading.Ok, now that you have freed up some space on your system HD, the next thing would be to do a little system maintenance.
First, shut down your Mac and restart it. Don't just log out. Shut it down. Power it off. Then restart. In System Preferences, turn off Time Machine if you have it running. Also put your system HD in the Spotlight privacy list (aka System Preferences > Spotlight > Privacy > Prevent Spotlight from Searching These Locations.)
Then, if you don't already have one, download a utility like Cocktail, Onyx, MacJanitor, etc. and run it. (You have Leopard, so make sure you download the appropriate version of the utility.) Make sure there are NO other applications running when you run the utility. When you run it, accept all the default operations and also check the option to clear the system cache; you want to clear the system cache. Also set it to shut down your Mac after running. (If there is no such option, you should manually shut down your Mac after the utility runs - and I mean shut down, not just log off.) The first time you restart after running the utility & clearing the system cache, your Mac will take longer than normal to boot; don't worry, that only happens the first time, as your system will be rebuilding the system cache.
Next, you should probably delete any render files that currently exist and re-render your video.
Then try exporting your video again, and see what happens. -
Need help with email sync utilizing gmail...
I have the new curve 8520 and I use google sync for calendar and contacts. My question is regarding my emails syncing though. When I delete my email from my phone, it deletes from gmail, which is what I want. However, when I delete email on my my computer through gmail, it does not sync on my phone and I have to go into my phone and manually delete. How can I make my email sync up on both ends, both ways? Am I not being patient enough?
Try going into your Gmail on phone and click menu key and options... email reconciliation and set your conflicts setting to mailbox wins and see if that helps
>>>>>>>>>>>>>>>>>>>>>>>>~
Hope I was able to help
If you have received information that has helped you out, please give them Kudos.
If your problem has been solved, please click on the post that resolved the issue -
Need Help With File Matching Records
I need help with my file matching program.
Here is how it suppose to work: FileMatch class should contain methods to read oldmast.txt and trans.txt. When a match occurs (i.e., records with the same account number appear in both the master file and the transaction file), add the dollar amount in the transaction record to the current balance in the master record, and write the "newmast.txt" record. (Assume that purchases are indicated by positive amounts in the transaction file and payments by negative amounts.)
When there is a master record for a particular account, but no corresponding transaction record, merely write the master record to "newmast.txt". When there is a transaction record, but no corresponding master record, print to a log file the message "Unmatched transaction record for account number ..." (fill in the account number from the transaction record). The log file should be a text file named "log.txt".
Here is my following program code:
// Exercise 14.8: CreateTextFile.java
// creates a text file
import java.io.FileNotFoundException;
import java.lang.SecurityException;
import java.util.Formatter;
import java.util.FormatterClosedException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class CreateTextFile
private Formatter output1; // object used to output text to file
private Formatter output2; // object used to output text to file
// enable user to open file
public void openTransFile()
try
output1 = new Formatter("trans.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
output2 = new Formatter("oldmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openOldMastFile
// add transaction records to file
public void addTransactionRecords()
// object to be written to file
TransactionRecord record1 = new TransactionRecord();
Scanner input1 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0) and amount.","? ");
while (input1.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record1.setAccount(input1.nextInt()); // read account number
record1.setAmount(input1.nextDouble()); // read amount
if (record1.getAccount() > 0)
// write new record
output1.format("%d %.2f\n", record1.getAccount(), record1.getAmount());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input1.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0) ",
"and amount.","? ");
} // end while
} // end method addTransactionRecords
// add account records to file
public void addAccountRecords()
// object to be written to file
AccountRecord record2 = new AccountRecord();
Scanner input2 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0), first name, last name and balance.","? ");
while (input2.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record2.setAccount(input2.nextInt()); // read account number
record2.setFirstName(input2.next()); // read first name
record2.setLastName(input2.next()); // read last name
record2.setBalance(input2.nextDouble()); // read balance
if (record2.getAccount() > 0)
// write new record
output2.format("%d %s %s %.2f\n", record2.getAccount(), record2.getFirstName(),
record2.getLastName(), record2.getBalance());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input2.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0),",
"first name, last name and balance.","? ");
} // end while
} // end method addAccountRecords
// close file
public void closeTransFile()
if (output1 != null)
output1.close();
} // end method closeTransFile
// close file
public void closeOldMastFile()
if (output2 != null)
output2.close();
} // end method closeOldMastFile
} // end class CreateTextFile--------------------------------------------------------------------------------------------------
// Exercise 14.8: CreateTextFileTest.java
// Testing class CreateTextFile
public class CreateTextFileTest
// main method begins program execution
public static void main( String args[] )
CreateTextFile application = new CreateTextFile();
application.openTransFile();
application.addTransactionRecords();
application.closeTransFile();
application.openOldMastFile();
application.addAccountRecords();
application.closeOldMastFile();
} // end main
} // end class CreateTextFileTest-------------------------------------------------------------------------------------------------
// Exercise 14.8: TransactionRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
public class TransactionRecord
private int account;
private double amount;
// no-argument constructor calls other constructor with default values
public TransactionRecord()
this(0,0.0); // call two-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public TransactionRecord(int acct, double amt)
setAccount(acct);
setAmount(amt);
} // end two-argument TransactionRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set amount
public void setAmount(double amt)
amount = amt;
} // end method setAmount
// get amount
public double getAmount()
return amount;
} // end method getAmount
} // end class TransactionRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: AccountRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
import org.egan.TransactionRecord;
public class AccountRecord
private int account;
private String firstName;
private String lastName;
private double balance;
// no-argument constructor calls other constructor with default values
public AccountRecord()
this(0,"","",0.0); // call four-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public AccountRecord(int acct, String first, String last, double bal)
setAccount(acct);
setFirstName(first);
setLastName(last);
setBalance(bal);
} // end four-argument AccountRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set first name
public void setFirstName(String first)
firstName = first;
} // end method setFirstName
// get first name
public String getFirstName()
return firstName;
} // end method getFirstName
// set last name
public void setLastName(String last)
lastName = last;
} // end method setLastName
// get last name
public String getLastName()
return lastName;
} // end method getLastName
// set balance
public void setBalance(double bal)
balance = bal;
} // end method setBalance
// get balance
public double getBalance()
return balance;
} // end method getBalance
// combine balance and amount
public void combine(TransactionRecord record)
balance = (getBalance() + record.getAmount());
} // end method combine
} // end class AccountRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatch.java
import java.io.File;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import java.util.Formatter;
import java.util.FormatterClosedException;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class FileMatch
private Scanner inTransaction;
private Scanner inOldMaster;
private Formatter outNewMaster;
private Formatter theLog;
// enable user to open file
public void openTransFile()
try
inTransaction = new Scanner(new File("trans.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
inOldMaster = new Scanner(new File("oldmast.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openOldMastFile
// enable user to open file
public void openNewMastFile()
try
outNewMaster = new Formatter("newmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openNewMastFile
// enable user to open file
public void openLogFile()
try
theLog = new Formatter("log.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openLogFile
// update records
public void updateRecords()
TransactionRecord transaction = new TransactionRecord();
AccountRecord account = new AccountRecord();
try // read records from file using Scanner object
System.out.println("Start file matching.");
while (inTransaction.hasNext() && inOldMaster.hasNext())
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
account.setAccount(inOldMaster.nextInt()); // read account number
account.setFirstName(inOldMaster.next()); // read first name
account.setLastName(inOldMaster.next()); // read last name
account.setBalance(inOldMaster.nextDouble()); // read balance
if (transaction.getAccount() == account.getAccount())
while (inTransaction.hasNext() && transaction.getAccount() == account.getAccount())
account.combine(transaction);
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
else if (transaction.getAccount() != account.getAccount())
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
theLog.format("%s%d","Unmatched transaction record for account number ",transaction.getAccount());
} // end while
System.out.println("Finish file matching.");
} // end try
catch (NoSuchElementException elementException)
System.err.println("File improperly formed.");
inTransaction.close();
inOldMaster.close();
System.exit(1);
} // end catch
catch (IllegalStateException stateException)
System.err.println("Error reading from file.");
System.exit(1);
} // end catch
} // end method updateRecords
// close file and terminate application
public void closeTransFile()
if (inTransaction != null)
inTransaction.close();
} // end method closeTransFile
// close file and terminate application
public void closeOldMastFile()
if (inOldMaster != null)
inOldMaster.close();
} // end method closeOldMastFile
// close file
public void closeNewMastFile()
if (outNewMaster != null)
outNewMaster.close();
} // end method closeNewMastFile
// close file
public void closeLogFile()
if (theLog != null)
theLog.close();
} // end method closeLogFile
} // end class FileMatch-------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatchTest.java
// Testing class FileMatch
public class FileMatchTest
// main method begins program execution
public static void main( String args[] )
FileMatch application = new FileMatch();
application.openTransFile();
application.openOldMastFile();
application.openNewMastFile();
application.openLogFile();
application.updateRecords();
application.closeLogFile();
application.closeNewMastFile();
application.closeOldMastFile();
application.closeTransFile();
} // end main
} // end class FileMatchTest-------------------------------------------------------------------------------------------------
Sample data for master file:
Master file
Account Number Name Balance
100 Alan Jones 348.17
300 Mary Smith 27.19
500 Sam Sharp 0.00
700 Suzy Green -14.22Sample data for transaction file:
Transaction file Transaction
Account Number Amount
100 27.14
300 62.11
300 83.89
400 100.56
700 80.78
700 1.53
900 82.17 -------------------------------------------------------------------------------------------------
My FileMatch class program above has bugs in it.
The correct results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 173.19
500 Sam Sharp 0.00
700 Suzy Green 68.09The correct results for the log.txt:
Unmatched transaction record for account number 400Unmatched transaction record for account number 900------------------------------------------------------------------------------------------------
My results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 111.08
500 Sam Sharp 0.00
700 Suzy Green -12.69My results for the log.txt
Unmatched transaction record for account number 700-------------------------------------------------------------------------------------------------
I am not sure what is wrong with my code above to make my results different from the correct results.
Much help is appreciated. Please help.From the output, it looks like one problem is just formatting -- apparently you're including a newline in log entries and not using tabs for the newmast output file.
As to why the numbers are off -- just from glancing over it, it appears that the problem is when you add multiple transaction values. Since account.combine() is so simple, I suspect that you're either adding creating transaction objects incorrectly or not creating them when you should be.
Create test input data that isolates a single case of this (e.g., just the Mary Smith case), and then running your program in a debugger or adding debugging code to the add/combine method, so you can see what's happening in detail.
Also I'd recommend reconsidering your design. It's a red flag if a class has a name with "Create" in it. Classes represent bundles of independant state and transformations on that state, not things to do. -
I need help with my EtreCheck report
Hi All -
Thanks for taking the time -
I NEED HELP WITH MY EtreCheck report
Problem description:
running slow
EtreCheck version: 2.1.8 (121)
Report generated February 19, 2015 at 3:18:49 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,1
1 2.6 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 130
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1440 x 900
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:12:52
Disk Information: ℹ️
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (362.64 GB free)
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.6) [Click for support]
[not loaded] com.sony.filesystem.prodisc_fs (2.3.0) [Click for support]
[not loaded] com.sony.protocol.prodisc (2.3.0) [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.versioncueCS3.plist [Click for support]
[loaded] com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist [Click for support]
User Launch Agents: ℹ️
[failed] [email protected] [Click for details]
[loaded] com.google.keystone.agent.plist [Click for support]
[failed] com.jdibackup.ZipCloud.autostart.plist [Click for support] [Click for details]
[loaded] com.jdibackup.ZipCloud.notify.plist [Click for support]
User Login Items: ℹ️
RED Watchdog Application (/Applications/REDCINE-X Professional/Utilities/RED Watchdog.app)
GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
GrowlHelperApp Application (/Users/[redacted]/Library/PreferencePanes/Growl.prefPane/Contents/Resources/Gr owlHelperApp.app)
iTunesHelper UNKNOWN Hidden (missing value)
QmasterStatusMenu Application (/Incompatible Software/Apple Qmaster.prefPane/Contents/Resources/QmasterStatusMenu.app)
SpyderUtility Application (/Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app)
Spyder3Utility Application (/Applications/Datacolor/Spyder3Elite/Spyder3Utility.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 8.1.0 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS3 [Click for support]
Flash Player [Click for support]
Growl [Click for support]
REDcode [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
10% mds
5% WindowServer
0% Google Drive
0% Google Chrome
0% fontd
Top Processes by Memory: ℹ️
172 MB Google Chrome
155 MB mds_stores
155 MB Mail
103 MB Google Chrome Helper
94 MB Google Drive
Virtual Memory Information: ℹ️
4.52 GB Free RAM
2.72 GB Active RAM
451 MB Inactive RAM
895 MB Wired RAM
1.30 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 19, 2015, 03:03:40 PM Self test - passedWhy Put it off I say ... Here you go Linc
Start time: 12:05:29 02/20/15
Revision: 1250
Model Identifier: MacBookPro9,1
System Version: OS X 10.10.2 (14C109)
Kernel Version: Darwin 14.1.0
Time since boot: 2:42
UID: 504
I/O wait time (ms/s)
kernel_task (UID 0): 39
Font issues: 263
Trust settings: admin 4, user 4
TCP/IP
Subnet mask: 255.255.252.0
Listeners
cupsd: ipp
nfsd: 1023
rpc.lockd: 1017
rpc.rquotad: garcon
rpc.statd: exp1
rpcbind: sunrpc
System caches/logs
3319 MB: /System/Library/Caches/com.apple.coresymbolicationd/data
Diagnostic reports
2015-02-02 Mail crash
2015-02-04 Spyder3Utility crash
2015-02-20 Acrobat hang x3
2015-02-20 Final Cut Pro crash x2
HID errors: 22
Kernel log
Feb 20 10:20:53 Google Chrome He (map: 0xffffff801e1b7c30) triggered DYLD shared region unnest for map: 0xffffff801e1b7c30, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 10:31:10 ARPT: 3921.321063: MacAuthEvent en1 Auth result for: 00:19:92:35:03:01 Auth request tx failed
Feb 20 10:41:10 Google Chrome He (map: 0xffffff801e116870) triggered DYLD shared region unnest for map: 0xffffff801e116870, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 10:41:14 Google Chrome He (map: 0xffffff802265ee10) triggered DYLD shared region unnest for map: 0xffffff802265ee10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 10:41:30 Google Chrome He (map: 0xffffff802265ee10) triggered DYLD shared region unnest for map: 0xffffff802265ee10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome (map: 0xffffff801e116870) triggered DYLD shared region unnest for map: 0xffffff801e116870, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome He (map: 0xffffff802b72a960) triggered DYLD shared region unnest for map: 0xffffff802b72a960, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome He (map: 0xffffff802b72a3c0) triggered DYLD shared region unnest for map: 0xffffff802b72a3c0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome He (map: 0xffffff8023819f00) triggered DYLD shared region unnest for map: 0xffffff8023819f00, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:21:01 Google Chrome He (map: 0xffffff802cdb0e10) triggered DYLD shared region unnest for map: 0xffffff802cdb0e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:21:01 Google Chrome He (map: 0xffffff8022da2e10) triggered DYLD shared region unnest for map: 0xffffff8022da2e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:21:01 Google Chrome He (map: 0xffffff8023819b40) triggered DYLD shared region unnest for map: 0xffffff8023819b40, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:30:46 Sandbox: fontworker(1439) deny file-read-data /Library/Fonts/MyriadPro-LightCond.otf
Feb 20 11:30:46 Sandbox: fontworker(1439) deny file-read-data /Library/Fonts/MyriadPro-LightCondIt.otf
Feb 20 11:49:11 Google Chrome (map: 0xffffff802b72a2d0) triggered DYLD shared region unnest for map: 0xffffff802b72a2d0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff802cdb0780) triggered DYLD shared region unnest for map: 0xffffff802cdb0780, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63e10) triggered DYLD shared region unnest for map: 0xffffff8022a63e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63c30) triggered DYLD shared region unnest for map: 0xffffff8022a63c30, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff802cdb05a0) triggered DYLD shared region unnest for map: 0xffffff802cdb05a0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63f00) triggered DYLD shared region unnest for map: 0xffffff8022a63f00, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63690) triggered DYLD shared region unnest for map: 0xffffff8022a63690, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:59:29 Sandbox: fontworker(1671) deny file-read-data /Library/Fonts/MyriadPro-LightCond.otf
Feb 20 11:59:29 Sandbox: fontworker(1671) deny file-read-data /Library/Fonts/MyriadPro-LightCondIt.otf
Feb 20 12:08:01 ARPT: 8890.600067: MacAuthEvent en1 Auth result for: 00:19:92:35:7d:e1 Auth request tx failed
Feb 20 12:08:01 ARPT: 8890.950534: MacAuthEvent en1 Auth result for: 00:19:92:35:03:01 Auth timed out
System log
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:25:05 airportd: _handleLinkEvent: WiFi is not powered. Resetting state variables.
Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
Feb 20 11:28:49 WindowServer: WSBindSurface Invalid surface 723885656 for window 1311
Feb 20 11:29:13 fseventsd: event logs in /Volumes/WDA_1T/.fseventsd out of sync with volume. destroying old logs. (461 2 59825)
Feb 20 11:29:13 fseventsd: log dir: /Volumes/WDA_1T/.fseventsd getting new uuid: UUID
Feb 20 11:30:16 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:30:16 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:36:11 WindowServer: _CGXSetWindowHasKeyAppearance: Operation on a window 0x18 requiring rights kCGSWindowRightOwner by caller Dashboard
Feb 20 11:36:11 WindowServer: _CGXSetWindowHasMainAppearance: Operation on a window 0x18 requiring rights kCGSWindowRightOwner by caller Dashboard
Feb 20 11:41:24 apsd: Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[1532]
Feb 20 11:43:40 Mail: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
Feb 20 11:43:40 Mail: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
Feb 20 12:01:17 WindowServer: WSGetSurfaceInWindow Invalid surface 710322265 for window 1327
Feb 20 12:04:39 fseventsd: implementation_removed_client: did not find client 0x7f9eec210660 for path = '/.docid'
Feb 20 12:11:28 apsd: Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[2262]
Console log
Feb 15 12:07:08 ReportCrash: Invoking spindump for pid=644 wakeups_rate=158 duration=285 because of excessive wakeups
Feb 15 12:55:36 ReportCrash: Invoking spindump for pid=754 wakeups_rate=200 duration=225 because of excessive wakeups
Feb 15 13:59:55 ReportCrash: Invoking spindump for pid=913 wakeups_rate=186 duration=242 because of excessive wakeups
Feb 15 16:54:59 ReportCrash: Invoking spindump for pid=964 wakeups_rate=188 duration=240 because of excessive wakeups
Feb 16 10:35:10 ReportCrash: Invoking spindump for pid=1059 wakeups_rate=337 duration=134 because of excessive wakeups
Feb 16 10:51:21 ReportCrash: Invoking spindump for pid=1080 wakeups_rate=161 duration=280 because of excessive wakeups
Feb 16 11:59:13 ReportCrash: Invoking spindump for pid=1168 wakeups_rate=243 duration=186 because of excessive wakeups
Feb 16 12:02:57 ReportCrash: Invoking spindump for pid=1175 wakeups_rate=382 duration=118 because of excessive wakeups
Feb 16 13:07:53 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.ic.searchinstaller/Cache.db is NOT valid. Unable to determine schema version.
Feb 16 13:07:53 nsurlstoraged: ERROR: unable to determine file-system usage for FS-backed cache at /Users/USER/Library/Caches/com.ic.searchinstaller/fsCachedData. Errno=13
Feb 16 13:22:31 ReportCrash: Invoking spindump for pid=2237 wakeups_rate=326 duration=139 because of excessive wakeups
Feb 16 14:17:37 ReportCrash: Invoking spindump for pid=2420 wakeups_rate=228 duration=198 because of excessive wakeups
Feb 16 14:33:29 ReportCrash: Invoking spindump for pid=2438 wakeups_rate=240 duration=188 because of excessive wakeups
Feb 16 14:46:36 ReportCrash: Invoking spindump for pid=2454 wakeups_rate=305 duration=148 because of excessive wakeups
Feb 17 12:58:26 ReportCrash: Invoking spindump for pid=2894 wakeups_rate=689 duration=66 because of excessive wakeups
Feb 17 13:13:41 ReportCrash: Invoking spindump for pid=2914 wakeups_rate=487 duration=93 because of excessive wakeups
Feb 17 16:54:57 ReportCrash: Invoking spindump for pid=1965 wakeups_rate=162 duration=278 because of excessive wakeups
Feb 18 13:50:58 ReportCrash: Invoking spindump for pid=3869 wakeups_rate=160 duration=282 because of excessive wakeups
Feb 19 08:17:10 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 19 14:59:30 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 19 15:04:57 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 19 15:18:06 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
Feb 19 16:50:23 ReportCrash: Invoking spindump for pid=3308 wakeups_rate=189 duration=239 because of excessive wakeups
Feb 20 09:24:49 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Daemons
com.adobe.fpsaud
com.adobe.versioncueCS3
com.ambrosiasw.ambrosiaaudiosupporthelper.daemon
com.apple.watchdogd
Agents
[email protected]
- status: 78
com.apple.Finder
- status: -15
com.google.keystone.user.agent
com.jdibackup.ZipCloud.autostart
- status: 1
com.jdibackup.ZipCloud.notify
- status: 1
User login items
RED Watchdog
- /Applications/REDCINE-X Professional/Utilities/RED Watchdog.app
GrowlHelperApp
- /Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app
GrowlHelperApp
- /Users/USER/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelp erApp.app
iTunesHelper
- missing value
QmasterStatusMenu
- /Incompatible Software/Apple Qmaster.prefPane/Contents/Resources/QmasterStatusMenu.app
SpyderUtility
- /Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app
Spyder3Utility
- /Applications/Datacolor/Spyder3Elite/Spyder3Utility.app
Google Drive
- /Applications/Google Drive.app
Google Chrome
- /Applications/Google Chrome.app
Firefox extensions
Live PageRank
Web Developer
Exif Viewer
iCloud errors
bird 418
cloudd 65
Continuity errors
sharingd 21
Restricted files: 335
Lockfiles: 48
Contents of /Library/LaunchDaemons/com.adobe.versioncueCS3.plist
- mod date: Oct 20 14:05:00 2009
- checksum: 714202969
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GroupName</key>
<string>wheel</string>
<key>Label</key>
<string>com.adobe.versioncueCS3</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3d</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ServiceDescription</key>
<string>Adobe Version Cue CS3</string>
<key>UserName</key>
<string>root</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist
- mod date: Dec 21 11:32:33 2012
- checksum: 1980407752
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.ambrosiasw.ambrosiaaudiosupporthelper.daemon</string>
<key>ProgramArguments</key>
<array>
<string>/System/Library/Extensions/AmbrosiaAudioSupport.kext/Contents/MacOS/amb rosiaaudiosupporthelper</string>
</array>
<key>KeepAlive</key>
<false/>
<key>Disabled</key>
<false/>
<key>LaunchEvents</key>
<dict>
<key>com.apple.iokit.matching</key>
<dict>
<key>AmbrosiaAudioSupport</key>
<dict>
<key>IOMatchLaunchStream</key>
<true/>
<key>IOProviderClass</key>
<string>com_AmbrosiaSW_AudioSupport</string>
</dict>
...and 4 more line(s)
Contents of /Library/LaunchDaemons/com.apple.qmaster.qmasterd.plist
- mod date: Aug 25 21:24:23 2010
- checksum: 681742547
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.qmaster.qmasterd</string>
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/qmasterd</string>
</array>
<key>OnDemand</key>
<false/>
</dict>
</plist>
Contents of /private/etc/hosts
- mod date: Sep 20 11:46:00 2013
- checksum: 1921340845
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
Contents of Library/LaunchAgents/[email protected]
- mod date: Sep 15 12:18:45 2009
- checksum: 2526625188
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>[email protected]</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>LowPriorityIO</key>
<true/>
<key>Nice</key>
<integer>10</integer>
<key>ProgramArguments</key>
<array>
<string>/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices .framework/Versions/A/Support/CSConfigDotMacCert</string>
<string>-l</string>
<string>/Users/USER/Library/Logs/[email protected]</string>
<string>-u</string>
<string>@me.com</string>
<string>-t</string>
<string>SharedServices</string>
<string>-s</string>
</array>
...and 4 more line(s)
Contents of Library/LaunchAgents/com.google.keystone.agent.plist
- mod date: Nov 28 13:56:29 2014
- checksum: 3826001454
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.user.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.jdibackup.ZipCloud.autostart.plist
- mod date: Feb 19 15:00:08 2015
- checksum: 2356528749
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.jdibackup.ZipCloud.autostart</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>/Applications/ZipCloud.app/Contents/Resources/Utility.app</string>
<string>-n</string>
<string>--args</string>
<string>9</string>
<string>-l</string>
</array>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_out.log</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_err.log</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.jdibackup.ZipCloud.notify.plist
- mod date: Feb 19 15:00:08 2015
- checksum: 1841511774
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.jdibackup.ZipCloud.notify</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>/Applications/ZipCloud.app/Contents/Resources/Utility.app</string>
<string>--args</string>
<string>7</string>
<string>1</string>
</array>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_out.log</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_err.log</string>
<key>StartInterval</key>
<integer>1200</integer>
<key>RunAtLoad</key>
<false/>
</dict>
</plist>
Extensions
/System/Library/Extensions/AmbrosiaAudioSupport.kext
- com.AmbrosiaSW.AudioSupport
/System/Library/Extensions/FAMProtocol.kext
- com.sony.protocol.prodisc
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/prodisc_fs.kext
- com.sony.filesystem.prodisc_fs
Applications
/Applications/Adobe Acrobat 8 Professional/Acrobat Distiller.app
- com.adobe.distiller
/Applications/Adobe Acrobat 8 Professional/Acrobat Uninstaller.app
- com.adobe.Acrobat.Uninstaller
/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app
- com.adobe.Acrobat.Pro
/Applications/Adobe Bridge CS3/Bridge CS3.app
- com.adobe.bridge2
/Applications/Adobe Device Central CS3/Device Central.app
- com.adobe.devicecentral.application
/Applications/Adobe Dreamweaver CS3/Dreamweaver.app
- com.adobe.dreamweaver-9.0
/Applications/Adobe Extension Manager/Extension Manager.app
- com.adobe.ExtensionManager
/Applications/Adobe Fireworks CS3/Adobe Fireworks CS3.app
- com.macromedia.fireworks
/Applications/Adobe Flash CS3 Video Encoder/Adobe Flash CS3 Video Encoder.app
- com.macromedia.FLVEncoder
/Applications/Adobe Flash CS3/Adobe Flash CS3.app
- com.adobe.flash-9.0-en_us
/Applications/Adobe Flash CS3/Players/Debug/Flash Player.app
- com.macromedia.Flash Player.app
/Applications/Adobe Flash CS3/Players/Debug/Install Flash Player 9 UB.app
- com.MindVision.VISEX
/Applications/Adobe Flash CS3/Players/Flash Player.app
- com.macromedia.Flash Player.app
/Applications/Adobe Flash CS3/Players/Release/Flash Player.app
- com.macromedia.Flash Player.app
/Applications/Adobe Flash CS3/Players/Release/Install Flash Player 9 UB.app
- com.MindVision.VISEX
/Applications/Adobe Help Viewer 1.0.app
- com.adobe.Adobe Help Viewer
/Applications/Adobe Help Viewer 1.1.app
- com.adobe.Adobe Help Viewer
/Applications/Adobe Illustrator CS3/Adobe Illustrator.app
- com.adobe.illustrator
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Analyze Documents.localized/Analyze Documents.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Calendar.localized/Make Calendar.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Collect for Output.localized/Collect for Output.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Contact Sheet Demo.localized/Contact Sheets.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Export Flash Animation.localized/Export Flash Animation.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Web Gallery.localized/Web Gallery.app
- N/A
/Applications/Adobe Photoshop CS3/Adobe Photoshop CS3.app
- com.adobe.Photoshop
/Applications/Adobe Premiere Pro CS3/Adobe Premiere Pro CS3.app
- com.adobe.AdobePremierePro
/Applications/Adobe Stock Photos CS3/Adobe Stock Photos CS3.app
- com.adobe.stockphotos-1.5
/Applications/Audacity/Audacity.app
- net.sourceforge.audacity
/Applications/Beak.app
- com.flyosity.beak
/Applications/Buzzbird.app
- org.buzzbird.buzzbird
/Applications/Celtx.app
- ca.greyfirst.celtx
/Applications/Datacolor/Spyder3Elite/Spyder3Elite.app
- com.datacolor.spyder3elite
/Applications/Datacolor/Spyder3Elite/Spyder3Utility.app
- com.datacolor.spyder3utility
/Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app
- com.datacolor.spyderutility
/Applications/Disk Inventory X.app
- com.derlien.DiskInventoryX
/Applications/Epson Software/Print CD/Print CD.app
- jp.co.epson.PrintCD2
/Applications/FileZilla.app
- de.filezilla
/Applications/FlashVideo Converter.app
- com.geovid.
/Applications/Gorilla Folder/Gorilla Program 4.0.0/Gorilla 4.0.0
- N/A
/Applications/HandBrake.app
- org.m0k.handbrake
/Applications/Levelator.app
- org.conversationsnetwork.levelator
/Applications/OpenOffice.org.app
- org.openoffice.script
/Applications/RecBoot.app
- com.lepidu.RecBoot
/Applications/Smultron.app
- org.smultron.Smultron
/Applications/TouchCopy.app
- N/A
/Applications/Uninstall MM Scheduling/Uninstall MM Scheduling.app
- N/A
/Applications/Utilities/Adobe Utilities.localized/Adobe Updater5/Adobe Updater.app
- "com.Adobe.ESD.AdobeUpdaterApplication"
/Applications/Utilities/Adobe Utilities.localized/ExtendScript Toolkit 2/ExtendScript Toolkit 2.app
- com.adobe.estoolkit-2.0
/Applications/Utilities/Bluetooth Firmware Update.app
- com.apple.updaters.btfirmwareupdate201
/Applications/Utilities/FAM Driver Tool.app
- com.sony.famdrivertool
/Applications/VLC.app
- org.videolan.vlc
/Applications/XDCAM Transfer.app
- com.sony.bprl.xdcamtransfer
/Applications/YouSendIt Desktop App.app
- com.yousendit.YouSendIt
/Applications/YouSendIt.app
- com.yousendit.YouSendItExpress
/Applications/gedit.app
- org.gnome.gedit
/Applications/iWork '08/Keynote.app
- com.apple.iWork.Keynote
/Applications/iWork '08/Numbers.app
- com.apple.iWork.Numbers
/Applications/iWork '08/Pages.app
- com.apple.iWork.Pages
/Developer/Applications/Utilities/MacPython 2.5/Build Applet.app
- org.python.buildapplet
/Developer/Applications/Utilities/Python 2.6/Build Applet.app
- org.python.buildapplet
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.3/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.3/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileAddressBook.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/AdSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Contacts.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Game Center.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/TrustMe.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/WebSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/iPodOut.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/AdSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Contacts.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Game Center~iphone.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/TrustMe.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/WebSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/iPodOut.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/AdSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/AdSheet~ipad.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Camera.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Contacts~ipad.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Contacts~iphone.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/DataActivation.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Game Center~ipad.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Game Center~iphone.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/TrustMe.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/WebSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/iPodOut.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Library/Application Support/Adobe/Adobe Asset Services CS3/AssetServicesCS3.app
- com.adobe.assetServicesCS3
/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3.app
- com.adobe.versioncueCS3.VersionCueCS3
/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3Status.app
- com.adobe.versioncueCS3.VCStatusMenu
/Library/Application Support/Adobe/Installers/UUID/Setup.app
- com.adobe.Installers.Redirector
/Library/Application Support/Adobe/Installers/R1/Setup.app
- com.adobe.Installers.Setup
/Library/Application Support/Intuit/QuickBooks/2007/JHandShake.app
- com.intuit.JHandShake
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
- com.microsoft.silverlight.sllauncher
/Library/Application Support/ProApps/MIO/RAD/Plugins/ReadMe(Image Handling Library).app
- jp.co.canon.DocumentLauncher
/Library/Application Support/iWork '08/iWork Tour.app
- com.apple.iWorkTour
/Library/Documentation/User Guides And Information.localized/Apple Hardware Test Read Me.app
- com.apple.AppleHardwareTestReadMe
/Library/Printers/EPSON/InkjetPrinter/AutoSetupTool/EPIJAutoSetupTool.app
- com.epson.ijprinter.EPIJAutoSetupTool
/Library/Printers/EPSON/InkjetPrinter/Filter/rastertoescp.app
- com.epson.ijprinter.rastertoescp
/Library/Printers/EPSON/InkjetPrinter/Utilities/EPSON Printer Utility3.app
- com.epson.ijprinter.Utility3
/Library/Printers/hp/Fax/fax.backend
- com.hp.fax
/Library/Printers/hp/Fax/rastertofax.filter
- com.hp.rastertofax
/Library/Printers/hp/cups/filters/pdftopdf.filter
- com.hp.print.cups.filter.pdftopdf
/Users/USER/Documents/iPhone Apps/Archivers/build/Debug-iphonesimulator/Archivers.app
- N/A
/Users/USER/Documents/iPhone Apps/Archivers_test/build/Debug-iphonesimulator/Archivers.app
- N/A
/Users/USER/Documents/iPhone Apps/DateCell/build/Debug-iphonesimulator/DateCell.app
- N/A
/Users/USER/Documents/iPhone Apps/EasyCustomTable/build/Debug-iphonesimulator/EasyCustomTable.app
- N/A
/Users/USER/Documents/iPhone Apps/Grids/build/Debug-iphonesimulator/Grids.app
- N/A
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug-iphoneos/Metalsmith Suite.app
- N/A
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug-iphonesimulator/Metalsmith Suite.app
- N/A
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug/Metalsmith Suite.app
- com.yourcompany.Metalsmith-Suite
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Distrobution-iphoneos/Metalsmith Suite.app
- N/A
/Users/USER/Documents/iPhone Apps/Scrolling/build/Debug-iphonesimulator/Scrolling.app
- N/A
/Users/USER/Documents/iPhone Apps/UICatalog/build/Debug-iphonesimulator/UICatalog.app
- N/A
/Users/USER/Documents/iPhone Apps/WebViewTutorial/build/Debug-iphonesimulator/WebViewTutorial.app
- N/A
/Users/USER/Documents/iPhone Apps/XML/build/Debug-iphonesimulator/XML.app
- N/A
/Users/USER/Documents/sites/nvrslp.com/dev/the_lab/ns_resize
- N/A
/Users/USER/Documents/sites/zoomify/Zoomifyer EZ v3.1/Zoomifyer EZ.app
- N/A
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_apdfllckaahabafndbhieahigkjlhalf/Default apdfllckaahabafndbhieahigkjlhalf.app
- com.google.Chrome.app.Default-apdfllckaahabafndbhieahigkjlhalf-internal
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_bepbmhgboaologfdajaanbcjmnhjmhfn/Default bepbmhgboaologfdajaanbcjmnhjmhfn.app
- com.google.Chrome.app.Default-bepbmhgboaologfdajaanbcjmnhjmhfn-internal
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_blpebaehgfgkcmmjjknibibbjacnplim/Default blpebaehgfgkcmmjjknibibbjacnplim.app
- com.google.Chrome.app.Default-blpebaehgfgkcmmjjknibibbjacnplim-internal
/Users/USER/Library/Application Support/iPhone Simulator/3.1.2/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/UICatalog.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/WebViewTutorial.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Archivers.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/AnimatedGifExample.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.2/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/4.2/Applications/UUID/Spinspiration.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/XML.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/DateCell.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/UICatalog.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Scrolling.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Autoscroll.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Grids.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/TapToZoom.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/EasyCustomTable.app
- N/A
/Users/USER/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin/octoshape/octoshape
- N/A
Frameworks
/Library/Frameworks/REDCODE.Color.framework
- com.red.redcode.color
/Users/USER/Library/Frameworks/EWSMac-GC.framework
- com.eSellerate.EWSMac67108872
PrefPane
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/REDcode.prefPane
- com.red.prefpanel
/Library/PreferencePanes/VersionCueCS3.prefPane
- com.adobe.versioncueCS3.VCPrefPane
/Users/USER/Library/PreferencePanes/Growl.prefPane
- com.growl.prefpanel
Bundles
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/ASEFormat.plugin
- com.adobe.aseformat
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/BMP.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Cineon.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/EPS Parser.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/GIF.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/JPEG2000.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/OpenEXR.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PBM.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PCX.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PNG.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Pixar.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Radiance.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Targa.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/WBMP.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/altiveccore.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/dicom.plugin
- com.adobe.dicom
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/mmxcore.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/multiprocessor support.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/ppccore.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Required/Photoshop Adapter.plugin
- null
/Library/Application Support/Adobe/Flash Player/Flash Player.plugin
- com.macromedia.Flash Player.plugin
/Library/Application Support/Adobe/Plug-Ins/CS3/File Formats/Camera Raw.plugin
- com.adobe.CameraRaw
/Library/Frameworks/HPDeviceModel.framework/Versions/2.0/Frameworks/Core.framew ork/Versions/2.0/Resources/PlugIns/CFXmlParser.plugin
- com.hp.dmf.plugins.CFXmlParser
/Library/Frameworks/HPDeviceModel.framework/Versions/2.0/Frameworks/Core.framew ork/ -
Need help with calculator project for an assignment...
Hi all, I please need help with my calculator project that I have to do for an assignment.
Here is the project's specifications that I need to do"
"""Create a console calculator applicaion that:
* Takes one command line argument: your name and surname. When the
program starts, display the date and time with a welcome message for the
user.
* Display all the available options to the user. Your calculator must include
the arithmetic operations as well as at least five scientific operations of the
Math class.
-Your program must also have the ability to round a number and
truncate it.
-When you multiply by 2, you should not use the '*' operator to perform the
operation.
-Your program must also be able to reverse the sign of a number.
* Include sufficient error checking in your program to ensure that the user
only enters valid input. Make use of the String; Character, and other
wrapper classes to help you.
* Your program must be able to do conversions between decimal, octal and
hex numbers.
* Make use of a menu. You should give the user the option to end the
program when entering a certain option.
* When the program exits, display a message for the user, stating the
current time, and calculate and display how long the user used your
program.
* Make use of helper classes where possible.
* Use the SDK to run your program."""
When the program starts, it asks the user for his/her name and surname. I got the program to ask the user again and again for his/her name and surname
when he/she doesn't insert anything or just press 'enter', but if the user enters a number for the name and surname part, the program continues.
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??
Here is the programs code that I've written so far:
{code}
import java.io.*;
import java.util.*;
import java.text.*;
public class Project {
private static String nameSurname = "";
private static String num1 = null;
private static String num2 = null;
private static String choice1 = null;
private static double answer = 0;
private static String more;
public double Add() {
answer = (Double.parseDouble(num1) + Double.parseDouble(num2));
return answer;
public double Subtract() {
answer = (Double.parseDouble(num1) - Double.parseDouble(num2));
return answer;
public double Multiply() {
answer = (Double.parseDouble(num1) * Double.parseDouble(num2));
return answer;
public double Divide() {
answer = (Double.parseDouble(num1) / Double.parseDouble(num2));
return answer;
public double Modulus() {
answer = (Double.parseDouble(num1) % Double.parseDouble(num2));
return answer;
public double maximumValue() {
answer = (Math.max(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double minimumValue() {
answer = (Math.min(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double absoluteNumber1() {
answer = (Math.abs(Double.parseDouble(num1)));
return answer;
public double absoluteNumber2() {
answer = (Math.abs(Double.parseDouble(num2)));
return answer;
public double Squareroot1() {
answer = (Math.sqrt(Double.parseDouble(num1)));
return answer;
public double Squareroot2() {
answer = (Math.sqrt(Double.parseDouble(num2)));
return answer;
public static String octalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String octal1 = Integer.toOctalString(iNum1);
return octal1;
public static String octalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String octal2 = Integer.toOctalString(iNum2);
return octal2;
public static String hexadecimalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String hex1 = Integer.toHexString(iNum1);
return hex1;
public static String hexadecimalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String hex2 = Integer.toHexString(iNum2);
return hex2;
public double Round1() {
answer = Math.round(Double.parseDouble(num1));
return answer;
public double Round2() {
answer = Math.round(Double.parseDouble(num2));
return answer;
SimpleDateFormat format1 = new SimpleDateFormat("EEEE, dd MMMM yyyy");
Date now = new Date();
SimpleDateFormat format2 = new SimpleDateFormat("hh:mm a");
static Date timeIn = new Date();
public static long programRuntime() {
Date timeInD = timeIn;
long timeOutD = System.currentTimeMillis();
long msec = timeOutD - timeInD.getTime();
float timeHours = msec / 1000;
return (long) timeHours;
DecimalFormat decimals = new DecimalFormat("#0.00");
public String insertNameAndSurname() throws IOException{
boolean inputCorrect = false;
while (inputCorrect == false) {
while (nameSurname == null || nameSurname.length() == 0) {
for (int i = 0; i < nameSurname.length(); i++) {
if ((nameSurname.charAt(i) > 'a') && (nameSurname.charAt(i) < 'Z')){
inputCorrect = true;
else{
inputCorrect = false;
break;
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your name and surname: ");
nameSurname = inStream.readLine();
inputCorrect = true;
}catch (IOException ex) {
System.out.println("You did not enter your name and surname, " + nameSurname + " is not a name, please enter your name and surname :");
inputCorrect = false;
System.out.println("\nA warm welcome " + nameSurname + " ,todays date is: " + format1.format(now));
System.out.println("and the time is now exactly " + format2.format(timeIn) + ".");
return nameSurname;
public String inputNumber1() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter a number you want to do a calculation with and hit <ENTER>: ");
num1 = br.readLine();
double number1 = Double.parseDouble(num1);
System.out.println("\nThe number you have entered is: " + number1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("\nYou did not enter a valid number: " + "\""+ num1 + "\" is not a number!!");
inputCorrect = false;
return num1;
public String calculatorChoice() throws IOException {
System.out.println("Please select an option of what you would like to do with this number from the menu below and hit <ENTER>: ");
System.out.println("\n*********************************************");
System.out.println("---------------------------------------------");
System.out.println("Please select an option from the list below: ");
System.out.println("---------------------------------------------");
System.out.println("1 - Add");
System.out.println("2 - Subtract");
System.out.println("3 - Multiply");
System.out.println("4 - Divide (remainder included)");
System.out.println("5 - Maximum and minimum value of two numbers");
System.out.println("6 - Squareroot");
System.out.println("7 - Absolute value of numbers");
System.out.println("8 - Octal and Hexadecimal equivalent of numbers");
System.out.println("9 - Round numbers");
System.out.println("0 - Exit program");
System.out.println("**********************************************");
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your option and hit <ENTER>: ");
choice1 = inStream.readLine();
int c1 = Integer.parseInt(choice1);
System.out.println("\nYou have entered choice number: " + c1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid choice number: " + "\""+ choice1 + "\" is not in the list!!");
inputCorrect = false;
return choice1;
public String inputNumber2() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br2 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter another number you want to do the calculation with and hit <ENTER>: ");
num2 = br2.readLine();
double n2 = Double.parseDouble(num2);
System.out.println("\nThe second number you have entered is: " + n2);
System.out.println("\nYour numbers are: " + num1 + " and " + num2);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid number: " + "\""+ num2 + "\" is not a number!!");
inputCorrect = false;
return num2;
public int Calculator() {
int choice2 = (int) Double.parseDouble(choice1);
switch (choice2) {
case 1 :
Add();
System.out.print("The answer of " + num1 + " + " + num2 + " is: " + decimals.format(answer));
break;
case 2 :
Subtract();
System.out.print("The answer of " + num1 + " - " + num2 + " is: " + decimals.format(answer));
break;
case 3 :
Multiply();
System.out.print("The answer of " + num1 + " * " + num2 + " is: " + decimals.format(answer));
break;
case 4 :
Divide();
System.out.print("The answer of " + num1 + " / " + num2 + " is: " + decimals.format(answer));
Modulus();
System.out.print(" and the remainder is " + decimals.format(answer));
break;
case 5 :
maximumValue();
System.out.println("The maximum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
minimumValue();
System.out.println("The minimum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
break;
case 6 :
Squareroot1();
System.out.println("The squareroot of value " + num1 + " is: " + decimals.format(answer));
Squareroot2();
System.out.println("The squareroot of value " + num2 + " is: " + decimals.format(answer));
break;
case 7 :
absoluteNumber1();
System.out.println("The absolute number of " + num1 + " is: " + decimals.format(answer));
absoluteNumber2();
System.out.println("The absolute number of " + num2 + " is: " + decimals.format(answer));
break;
case 8 :
octalEquivalent1();
System.out.println("The octal equivalent of " + num1 + " is: " + octalEquivalent1());
octalEquivalent2();
System.out.println("The octal equivalent of " + num2 + " is: " + octalEquivalent2());
hexadecimalEquivalent1();
System.out.println("\nThe hexadecimal equivalent of " + num1 + " is: " + hexadecimalEquivalent1());
hexadecimalEquivalent2();
System.out.println("The hexadecimal equivalent of " + num2 + " is: " + hexadecimalEquivalent2());
break;
case 9 :
Round1();
System.out.println("The rounded number of " + num1 + " is: " + decimals.format(answer));
Round2();
System.out.println("The rounded number of " + num2 + " is: " + decimals.format(answer));
break;
case 0 :
if (choice2 == 0) {
System.exit(1);
break;
return choice2;
public String anotherCalculation() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br3 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nWould you like to do another calculation? Y/N ");
more = br3.readLine();
String s1 = "y";
String s2 = "Y";
if (more.equals(s1) || more.equals(s2)) {
inputCorrect = true;
while (inputCorrect = true){
inputNumber1();
System.out.println("");
calculatorChoice();
System.out.println("");
inputNumber2();
System.out.println("");
Calculator();
System.out.println("");
anotherCalculation();
System.out.println("");
inputCorrect = true;
} else {
System.out.println("\n" + nameSurname + " thank you for using this program, you have used this program for: " + decimals.format(programRuntime()) + " seconds");
System.out.println("the program will now exit, Goodbye.");
System.exit(0);
} catch (IOException ex){
System.out.println("You did not enter a valid answer: " + "\""+ more + "\" is not in the list!!");
inputCorrect = false;
return more;
public static void main(String[] args) throws IOException {
Project p1 = new Project();
p1.insertNameAndSurname();
System.out.println("");
p1.inputNumber1();
System.out.println("");
p1.calculatorChoice();
System.out.println("");
p1.inputNumber2();
System.out.println("");
p1.Calculator();
System.out.println("");
p1.anotherCalculation();
System.out.println("");
{code}
*Can you please run my code for yourself and have a look at how this program is constructed*
*and give me ANY feedback on how I can better this code(program) or if I've done anything wrong from your point of view.*
Your help will be much appreciated.
Thanks in advanceSmirre wrote:
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??You cannot restrict the user. It is a sad fact in programming that the worst bug always sits in front of the Computer.
What you could do is checking the input string for numbers. If it contains numbers, just reprompt for the Name.
AND you might want to ask yourself why the heck a calculator needs to know the users Name. -
Need help with Berkeley XML DB Performance
We need help with maximizing performance of our use of Berkeley XML DB. I am filling most of the 29 part question as listed by Oracle's BDB team.
Berkeley DB XML Performance Questionnaire
1. Describe the Performance area that you are measuring? What is the
current performance? What are your performance goals you hope to
achieve?
We are measuring the performance while loading a document during
web application startup. It is currently taking 10-12 seconds when
only one user is on the system. We are trying to do some testing to
get the load time when several users are on the system.
We would like the load time to be 5 seconds or less.
2. What Berkeley DB XML Version? Any optional configuration flags
specified? Are you running with any special patches? Please specify?
dbxml 2.4.13. No special patches.
3. What Berkeley DB Version? Any optional configuration flags
specified? Are you running with any special patches? Please Specify.
bdb 4.6.21. No special patches.
4. Processor name, speed and chipset?
Intel Xeon CPU 5150 2.66GHz
5. Operating System and Version?
Red Hat Enterprise Linux Relase 4 Update 6
6. Disk Drive Type and speed?
Don't have that information
7. File System Type? (such as EXT2, NTFS, Reiser)
EXT3
8. Physical Memory Available?
4GB
9. Are you using Replication (HA) with Berkeley DB XML? If so, please
describe the network you are using, and the number of Replica’s.
No
10. Are you using a Remote Filesystem (NFS) ? If so, for which
Berkeley DB XML/DB files?
No
11. What type of mutexes do you have configured? Did you specify
–with-mutex=? Specify what you find inn your config.log, search
for db_cv_mutex?
None. Did not specify -with-mutex during bdb compilation
12. Which API are you using (C++, Java, Perl, PHP, Python, other) ?
Which compiler and version?
Java 1.5
13. If you are using an Application Server or Web Server, please
provide the name and version?
Oracle Appication Server 10.1.3.4.0
14. Please provide your exact Environment Configuration Flags (include
anything specified in you DB_CONFIG file)
Default.
15. Please provide your Container Configuration Flags?
final EnvironmentConfig envConf = new EnvironmentConfig();
envConf.setAllowCreate(true); // If the environment does not
// exist, create it.
envConf.setInitializeCache(true); // Turn on the shared memory
// region.
envConf.setInitializeLocking(true); // Turn on the locking subsystem.
envConf.setInitializeLogging(true); // Turn on the logging subsystem.
envConf.setTransactional(true); // Turn on the transactional
// subsystem.
envConf.setLockDetectMode(LockDetectMode.MINWRITE);
envConf.setThreaded(true);
envConf.setErrorStream(System.err);
envConf.setCacheSize(1024*1024*64);
envConf.setMaxLockers(2000);
envConf.setMaxLocks(2000);
envConf.setMaxLockObjects(2000);
envConf.setTxnMaxActive(200);
envConf.setTxnWriteNoSync(true);
envConf.setMaxMutexes(40000);
16. How many XML Containers do you have? For each one please specify:
One.
1. The Container Configuration Flags
XmlContainerConfig xmlContainerConfig = new XmlContainerConfig();
xmlContainerConfig.setTransactional(true);
xmlContainerConfig.setIndexNodes(true);
xmlContainerConfig.setReadUncommitted(true);
2. How many documents?
Everytime the user logs in, the current xml document is loaded from
a oracle database table and put it in the Berkeley XML DB.
The documents get deleted from XML DB when the Oracle application
server container is stopped.
The number of documents should start with zero initially and it
will grow with every login.
3. What type (node or wholedoc)?
Node
4. Please indicate the minimum, maximum and average size of
documents?
The minimum is about 2MB and the maximum could 20MB. The average
mostly about 5MB.
5. Are you using document data? If so please describe how?
We are using document data only to save changes made
to the application data in a web application. The final save goes
to the relational database. Berkeley XML DB is just used to store
temporary data since going to the relational database for each change
will cause severe performance issues.
17. Please describe the shape of one of your typical documents? Please
do this by sending us a skeleton XML document.
Due to the sensitive nature of the data, I can provide XML schema instead.
18. What is the rate of document insertion/update required or
expected? Are you doing partial node updates (via XmlModify) or
replacing the document?
The document is inserted during user login. Any change made to the application
data grid or other data components gets saved in Berkeley DB. We also have
an automatic save every two minutes. The final save from the application
gets saved in a relational database.
19. What is the query rate required/expected?
Users will not be entering data rapidly. There will be lot of think time
before the users enter/modify data in the web application. This is a pilot
project but when we go live with this application, we will expect 25 users
at the same time.
20. XQuery -- supply some sample queries
1. Please provide the Query Plan
2. Are you using DBXML_INDEX_NODES?
Yes.
3. Display the indices you have defined for the specific query.
XmlIndexSpecification spec = container.getIndexSpecification();
// ids
spec.addIndex("", "id", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
spec.addIndex("", "idref", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// index to cover AttributeValue/Description
spec.addIndex("", "Description", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_SUBSTRING, XmlValue.STRING);
// cover AttributeValue/@value
spec.addIndex("", "value", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// item attribute values
spec.addIndex("", "type", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// default index
spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// save the spec to the container
XmlUpdateContext uc = xmlManager.createUpdateContext();
container.setIndexSpecification(spec, uc);
4. If this is a large query, please consider sending a smaller
query (and query plan) that demonstrates the problem.
21. Are you running with Transactions? If so please provide any
transactions flags you specify with any API calls.
Yes. READ_UNCOMMITED in some and READ_COMMITTED in other transactions.
22. If your application is transactional, are your log files stored on
the same disk as your containers/databases?
Yes.
23. Do you use AUTO_COMMIT?
No.
24. Please list any non-transactional operations performed?
No.
25. How many threads of control are running? How many threads in read
only mode? How many threads are updating?
We use Berkeley XML DB within the context of a struts web application.
Each user logged into the web application will be running a bdb transactoin
within the context of a struts action thread.
26. Please include a paragraph describing the performance measurements
you have made. Please specifically list any Berkeley DB operations
where the performance is currently insufficient.
We are clocking 10-12 seconds of loading a document from dbd when
five users are on the system.
getContainer().getDocument(documentName);
27. What performance level do you hope to achieve?
We would like to get less than 5 seconds when 25 users are on the system.
28. Please send us the output of the following db_stat utility commands
after your application has been running under "normal" load for some
period of time:
% db_stat -h database environment -c
% db_stat -h database environment -l
% db_stat -h database environment -m
% db_stat -h database environment -r
% db_stat -h database environment -t
(These commands require the db_stat utility access a shared database
environment. If your application has a private environment, please
remove the DB_PRIVATE flag used when the environment is created, so
you can obtain these measurements. If removing the DB_PRIVATE flag
is not possible, let us know and we can discuss alternatives with
you.)
If your application has periods of "good" and "bad" performance,
please run the above list of commands several times, during both
good and bad periods, and additionally specify the -Z flags (so
the output of each command isn't cumulative).
When possible, please run basic system performance reporting tools
during the time you are measuring the application's performance.
For example, on UNIX systems, the vmstat and iostat utilities are
good choices.
Will give this information soon.
29. Are there any other significant applications running on this
system? Are you using Berkeley DB outside of Berkeley DB XML?
Please describe the application?
No to the first two questions.
The web application is an online review of test questions. The users
login and then review the items one by one. The relational database
holds the data in xml. During application load, the application
retrieves the xml and then saves it to bdb. While the user
is making changes to the data in the application, it writes those
changes to bdb. Finally when the user hits the SAVE button, the data
gets saved to the relational database. We also have an automatic save
every two minues, which saves bdb xml data and saves it to relational
database.
Thanks,
Madhav
[email protected]Could it be that you simply do not have set up indexes to support your query? If so, you could do some basic testing using the dbxml shell:
milu@colinux:~/xpg > dbxml -h ~/dbenv
Joined existing environment
dbxml> setverbose 7 2
dbxml> open tv.dbxml
dbxml> listIndexes
dbxml> query { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }
dbxml> queryplan { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }Verbosity will make the engine display some (rather cryptic) information on index usage. I can't remember where the output is explained; my feeling is that "V(...)" means the index is being used (which is good), but that observation may not be accurate. Note that some details in the setVerbose command could differ, as I'm using 2.4.16 while you're using 2.4.13.
Also, take a look at the query plan. You can post it here and some people will be able to diagnose it.
Michael Ludwig -
Need help with Installing Canon LBP 2900B on Macbook Pro OSX 10.6.8
I know this is going to sound silly, but really need help with this, URGENTLY!!!
Bought a Canon LBP2900B printer more than a year ago, and was using it on my MacBook Pro with OSX Snow Leopard (10.6.8) very well. My hard disk recently crashed and now I cannot reinstall the printer, nor can I find the driver for it anywhere for the Mac.
Have searched all the forums and followed all discussion threads on the Apple Communities as well, but none of the solutions seem to work. Even went back to @Dexter's solution with trying to download the file from the link http://boolet.free.fr/CAPT.zip (this is what I had done when I bought the printer, and it worked perfectly) but the link doesn't exist anymore.
Extremely grateful if anyone can put up a solution to this, or alternatively, IF ANYONE HAS THE OLD CAPT.ZIP FILE AND CAN UPLOAD IT.
Thanks in advance. Look forward to your solutions.
CheersDepends on how the partitons are arranged. If they're exactly as quoted, then yes.
Open Disk Utility and select the partition tab.
In the diagram, the top partition needs to be the one you're booted from, and partition 2 the middle one.
Select Partiton 2 so that it's highlighted, and click the '-' button below the diagram.
Drag the bottom right corner of partition 1 down to meet partition 3. -
HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5
Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questionsAll the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer. -
Hi everyone,
i'm fairly new to RAID scene and i need help for creating RAID 5 with 8 disk's.
I have HP ProLiant DL380 G6 with 8 disk's, each 500 GB.
i'm trying to create RAID 5 and to have one spare disk. I have made array from 7 disk and then create logical drive.
the last disk (8-th) i used as spare.
up to now i think i'm ok???
what confuse me is:
7 HDD X 500GB= 3500GB
after creating array i get 3200 GB, where i lose 300 GB??
after creating logical drive i get 2700 GB, where i lose 500 GB???
from 2700GB i give 150GB for system partition and for data storage i have only 2550 GB.
Why i lose 800GB??
Can someone explain me how RAID 5 works, do i create it correctly and why i lose so much space???
Is there other way to create RAID 5 without losing so much space?
Thanks you in advnce.The first 'loss' you encounter (300MB) is due to megabyte counting/rounding. A 500GB disk contains about 500.000.000 bytes. This quite a bit less than if counted properly using binary. you loose about 24288000 bytes per disk this way!
http://en.wikipedia.org/wiki/Mibibyte |
http://en.wikipedia.org/wiki/Megabyte
the second loss is due to how raid works.in raid 5 data is written to multiple disks to improve reliability. the simplies t form uses 3 disks: a write will cause half of the data to be written to disk 1, half to disk 2 and the XOR of both datahalfs to disk
3. In this scenario you will loose 33% of storage space and you can loose up to one of 3 disks.
By adding more disks, data can be spread more and the ratio available/raw will increase, or you can write aditionnal crc data and increase resliency for failures.
http://en.wikipedia.org/wiki/RAID
To check the exact algoritmes using on you RAID adapter, I would recommend contacting the vendor (or checking their support site) From your numbres, I do not think you will be able to configure RAID 5 on the same disks and having more available
space for your data.
MCP/MCSA/MCTS/MCITP -
Need Help With Download For Airport Express
Ok, computer dummy here needing help with airport express. We were given airport express last night from a friend who recently purchased a newer gadget. He told us we would need to come here to download the operating system. I see lots of links to updates but no links for someone like me who has never had anything like this on my computer before. Does anyone know what link I would need to use? We have a pc with windows XP. Thanks so much for your help!
Hello jesschambers. Welcome to the Apple Discussions!
The AirPort Express Base Station (AX) doesn't have an "operating system" per se, but it does have built-in firmware which pretty much is the same thing. In addition, in order to administer the AX, you will need the AirPort Admin Utility for your Windows PC.
Here are the links for the latest versions of both:
o AirPort Express Firmware Update 6.3 for Windows
o AirPort 4.2 for Windows -
Please I really need help with this video problem.
Hi!
Please I need help with this app I am trying to make for an Android cellphone and I've been struggling with this for a couple of months.
I have a main flash file (video player.fla) that will load external swf files. This is the main screen.When I click the Sets Anteriores button I want to open another swf file called sets.swf.The app is freezing when I click Sets Anteriores button
Here is the code for this fla file.
import flash.events.MouseEvent;
preloaderBar.visible = false;
var loader:Loader = new Loader();
btHome.enabled = false;
var filme : String = "";
carregaFilme("home.swf");
function carregaFilme(filme : String ) :void
var reqMovie:URLRequest = new URLRequest(filme);
loader.load(reqMovie);
loader.contentLoaderInfo.addEventListener(Event.OPEN,comeco);
loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,progresso);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,completo);
palco.addChild(loader);
function comeco(event:Event):void
preloaderBar.visible = true;
preloaderBar.barra.scaleX = 0;
function progresso(e:ProgressEvent):void
var perc:Number = e.bytesLoaded / e.bytesTotal;
preloaderBar.percent.text = Math.ceil(perc*100).toString();
preloaderBar.barra.scaleX = perc;
function completo(e:Event):void
preloaderBar.percent.text = '';
preloaderBar.visible = false;
btHome.addEventListener(MouseEvent.MOUSE_DOWN,onHomeDown);
btHome.addEventListener(MouseEvent.MOUSE_UP,onHomeUp);
btSets.addEventListener(MouseEvent.MOUSE_DOWN,onSetsDown);
btSets.addEventListener(MouseEvent.MOUSE_UP,onSetsUp);
btVivo.addEventListener(MouseEvent.MOUSE_DOWN,onVivoDown);
btVivo.addEventListener(MouseEvent.MOUSE_UP,onVivoUp);
btHome.addEventListener(MouseEvent.CLICK,onHomeClick);
btSets.addEventListener(MouseEvent.CLICK,onSetsClick);
function onSetsClick(Event : MouseEvent) : void
if (filme != "sets.swf")
filme = "sets.swf";
carregaFilme("sets.swf");
function onHomeClick(Event : MouseEvent) : void
if (filme != "home.swf")
filme = "home.swf";
carregaFilme("home.swf");
function onHomeDown(Event : MouseEvent) : void
btHome.y += 1;
function onHomeUp(Event : MouseEvent) : void
btHome.y -= 1;
function onSetsDown(Event : MouseEvent) : void
btSets.y += 1;
function onSetsUp(Event : MouseEvent) : void
btSets.y -= 1;
function onVivoDown(Event : MouseEvent) : void
btVivo.y += 1;
function onVivoUp(Event : MouseEvent) : void
btVivo.y -= 1;
Now this is the sets.fla file:
Here is the code for sets.fla
import flash.utils.Timer;
import flash.events.TimerEvent;
var video:Video;
var nc:NetConnection;
var ns:NetStream;
var t : Timer = new Timer(1000,0);
var meta:Object = new Object();
this.addEventListener(Event.ADDED_TO_STAGE,init);
function init(e:Event):void{
video= new Video(320, 240);
addChild(video);
video.x = 80;
video.y = 100;
nc= new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, onStatusEvent);
ns.bufferTime = 1;
ns.client = meta;
video.attachNetStream(ns);
ns.play("http://www.djchambinho.com/videos/segundaquinta.flv");
ns.pause();
t.addEventListener(TimerEvent.TIMER,timeHandler);
t.start();
function onStatusEvent(stat:Object):void
trace(stat.info.code);
meta.onMetaData = function(meta:Object)
trace(meta.duration);
function timeHandler(event : TimerEvent) : void
if (ns.bytesLoaded>0&&ns.bytesLoaded == ns.bytesTotal )
ns.resume();
t.removeEventListener(TimerEvent.TIMER,timeHandler);
t.stop();
The problem is when I test it on my computer it works but when I upload it to my phone it freezes when I click Sets Anteriores button.
Please help me with this problem I dont know what else to do.
thank youMy first guess is you're simply generating an error. You'll always want to load this on your device in quick debugging over USB so you can see any errors you're generating.
Outside that, if you plan on accessing anything inside the SWF you should be loading the SWF into the correct context. Relevant sample code:
var context:LoaderContext = new LoaderContext();
context.securityDomain = SecurityDomain.currentDomain;
context.applicationDomain = ApplicationDomain.currentDomain;
var urlReq:URLRequest = new URLRequest("http://www.[your_domain_here].com/library.swf");
var ldr:Loader = new Loader();
ldr.load(urlReq, context);
More information:
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7de0.html
If you're doing this on iOS you'll need to stripped SWFs if you plan on using any coding (ABC) inside the files. You mentioned iOS so I won't get into that here, but just incase, here's info on stripping external SWFs:
http://blogs.adobe.com/airodynamics/2013/03/08/external-hosting-of-secondary-swfs-for-air- apps-on-ios/ -
I am printing a calendar and certain events will be helds on certain dates.
One can edit the event if it has not passed the date. Events in the past can be viewed but not edited.
When I query the database the date must be formatted dd-MMM-yy
I am able to get today's date by doing this:
java.util.Date today = new java.util.Date();
String formatString = "dd-MMM-yy";
SimpleDateFormat sdf = new SimpleDateFormat(formatString);
String today_str = sdf.format(today);
My code for printing the calendar: I left out some of the table formatting in the JSP page.
GregorianCalendar d = new GregorianCalendar();
int today = d.get(Calendar.DAY_OF_MONTH);
int month = d.get(Calendar.MONTH);
d.set(Calendar.DAY_OF_MONTH,1);
int weekday = d.get(Calendar.DAY_OF_WEEK);
for(int i = Calendar.SUNDAY; i < weekday; i++)
out.print("<td> </td>");
do {
int day = d.get(Calendar.DAY_OF_MONTH);
out.print("<td>" + day + "</td>");
String formatString = "dd-MMM-yy";
SimpleDateFormat sdf = new SimpleDateFormat(formatString);
//if(event exists on this day
// Get results
// print link for viewing
// if (after today) print link for edit
if(weekday == Calendar.SATURDAY)
out.println("</tr><tr valign=top>");
d.add(Calendar.DAY_OF_MONTH,1);
weekday = d.get(Calendar.DAY_OF_WEEK);
} while(d.get(Calendar.MONTH) == month);
if(weekday != Calendar.SUNDAY)
System.out.println();
The part I need help on is this:
//if(event exists on this day
// Get results
// print link for viewing
// if (after today) print link for edit
I'm looping through each day of the month to print the days. I have the month, day, year as integers. How can I create a date object out of that and compare it to today's date to test if it's before or after today???
All the function in the Date class that I think would do this have been deprecated.Need Help with Dates
Here is some information about dates:
There are many edible palm fruits, and one of the most widespread and favored of these is the data (Phoenix dactylifera). Dates were cultivated in ancient land from Mesopotamia to prehistoric Egypt, possibly as early as 6000 B.C. Then--as now--dates were a staple for the natives of those dry regions. Much later, Arabs spread dates around northern Africa, and dates were introduced into California by the Spaniards in 1765, around Mission San Ignacio.
The date prefers dry, hot climates, because date fruits are injured at temperatures of 20 degrees F, and the damp climate of the California coast was not favorable for fruit production. In the mid-1800s, the date industry developed in California's hot interior valleys and in Arizona. Now the date industry in the United States is localized mostly in the Coachella Valley, where the sandy soils permit the plants to be deeply irrigated. Today the new varieties, mostly introduced in this century, produce about 40 million pounds of dates per annum, or over 60% of the dates consumed in this country. The rest are imported mainly from Persia. According to one survey, about one million people are engaged entirely in date palm cultivation worldwide.
Hope that helps. -
I have written a java program using jdk1.5. After completing my program I noticed that the compiler was outputting a warning. It tells me that there were a few unsafe operations in my code. Anyway I found out that my code needed to include generics. I was able to figure out how too include some of the generics. I am having trouble with the following:
[javac] /home/paul/Documents/java/PersonalInfo/src/personalInfo/logic/DB.java:105: warning: [unchecked] unchecked conversion
[javac] found : personalInfo.logic.FNComparator
[javac] required: java.util.Comparator<? super java.lang.Object>
[javac] Arrays.sort(sort, fn);
[javac] ^
[javac] /home/paul/Documents/java/PersonalInfo/src/personalInfo/logic/DB.java:105: warning: [unchecked] unchecked method invocation: <T>sort(T[],java.util.Comparator<? super T>) in java.util.Arrays is applied to (java.lang.Object[],personalInfo.logic.FNComparator)
[javac] Arrays.sort(sort, fn);
[javac] ^
[javac] /home/paul/Documents/java/PersonalInfo/src/personalInfo/logic/DB.java:109: warning: [unchecked] unchecked conversion
[javac] found : personalInfo.logic.LNComparator
[javac] required: java.util.Comparator<? super java.lang.Object>
[javac] Arrays.sort(sort, ln);
[javac] ^
[javac] /home/paul/Documents/java/PersonalInfo/src/personalInfo/logic/DB.java:109: warning: [unchecked] unchecked method invocation: <T>sort(T[],java.util.Comparator<? super T>) in java.util.Arrays is applied to (java.lang.Object[],personalInfo.logic.LNComparator)
[javac] Arrays.sort(sort, ln);
[javac] ^
The FN/LNComparator class implements the java.util.Comparator class. I have looked at the generics tutorial on the java.sun.com website. I can't figure out what I replace the <T> with to make the code compile and the warning to go away. I have tried <Comparator> but that just gives me an error that says FNComparator does not take any parameters.
If anyone knows how to fix these warnings let me know
-HockeyfanI know how to fix it.
Step 1. Stop writing subject-lines like "Need help with generics". Everyone who starts a topic needs help, that's why people post here!
Step 2. Don't just post the error message, post the relevant code. In [code ][code ] tags of course.
Step 3. Stop watching hockey, it'll stunt your growth
Step 4. Have the FN/LNComparator implement, not the raw Comparator, but Comparator<Object> -
I need help with the Quote applet.
Hey all,
I need help with the Quote applet. I downloaded it and encoded it in the following html code:
<html>
<head>
<title>Part 2</title>
</head>
<body>
<applet codebase="/demo/quote/classes" code="/demo/quote/JavaQuote.class"
width="300" height="125" >
<param name="bgcolor" value="ffffff">
<param name="bheight" value="10">
<param name="bwidth" value="10">
<param name="delay" value="1000">
<param name="fontname" value="TimesRoman">
<param name="fontsize" value="14">
<param name="link" value="http://java.sun.com/events/jibe/index.html">
<param name="number" value="3">
<param name="quote0" value="Living next to you is in some ways like sleeping with an elephant. No matter how friendly and even-tempered is the beast, one is affected by every twitch and grunt.|- Pierre Elliot Trudeau|000000|ffffff|7">
<param name="quote1" value="Simplicity is key. Our customers need no special technology to enjoy our services. Because of Java, just about the entire world can come to PlayStar.|- PlayStar Corporation|000000|ffffff|7">
<param name="quote2" value="The ubiquity of the Internet is virtually wasted without a platform which allows applications to utilize the reach of Internet to write ubiquitous applications! That's where Java comes into the picture for us.|- NetAccent|000000|ffffff|7">
<param name="space" value="20">
</applet>
</body>
</html>When I previewed it in Netscape Navigator, a box with a red X appeared, and this appeared in the console when I opened it:
load: class /demo/quote/JavaQuote.class not found.
java.lang.ClassNotFoundException: .demo.quote.JavaQuote.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: \demo\quote\JavaQuote\class.class (The system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(Unknown Source)
at java.io.FileInputStream.<init>(Unknown Source)
at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
Exception in thread "Thread-4" java.lang.NullPointerException
at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
at sun.plugin.AppletViewer.showAppletException(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)What went wrong? and how can I make it run correct?
Thanks,
Nathan PinnoJavaQuote.class is not where your HTML says it is. That is at the relative URL "/demo/quote/".
Maybe you are looking for
-
KDEmod very long time to open print dialog
Then I want to print something from a KDE application it takes a few minutes for the print dialog to open while I can't use the application I want to from because the window is blocked. I have set cups of from systemsettings and the printer is a Dell
-
How to capture index/row no of row in table using object oriented alv.
i have a table with many fields. i have an alv grid table displayed using object oriented alv. when i double click on a record, i call another screen. there i want to display the record number. eg, if i doubleclick on the third row, i will go to next
-
Logic or Live? Can Logic be used in a live setting similar to Abelton Live?
Hello, I'm a musician/engineer that wants to start mixing recordings and playing tracks in live performances. I've heard and seen Live do great things so I'm wondering: Can I use Logic and different areas of it [namely, the environment] to create liv
-
Application Loader error, how to submit app for approval
Firstly, here's my info: 1) App is for iPad and iPhone/iPod Touch 2) Build using Flash CS 5 (Windows), packaged using Air 2.6 using ADT. 3) Successfully build and tested my .ipa file. 4) I just got a Mac OSX (I'm new to Mac) for submitting to Apple f
-
Quicktime pro wont export - just shuts down
Hi - been searching the web for this one, but no luck. My QT pro just shuts down when I want to export. For example I open a FLV file and it plays fine. I then go to export it and QT just shuts down. I can export to WEB but not export. I do have Peri