Need help with new url address

i'm very new to iweb and .mac - i've worked with websites before but never actually registered for a domain and need help setting up my iweb or .mac website with a new address.
Can someone please help me with this...prices? where do i go? i just don't want to create a site for our student ministry at church without having a web/myname.com address.
Thanks in advance!
Chris

You'll find there are a lot of good ones. Godaddy is one that I used to use. I am very happy with bluehost.com great prices and excellent service
Produce | Shoot | Edit
Take Two Visual Media
http://www.take2vm.com

Similar Messages

Need help with new itouch

Please bare with me, while I 'try' to explain.
I have my itunes account linked to my iphone and macbook. I have bought my daughter an itouch for Xmas. Now I have set up a seperate itunes account for her on my other Windows laptop. So she is able to purchase apps without them going and clogging up my itunes... NOW this is the bit i need help with...
How can i transfer any music i have on my itunes to her itunes? and vice versa?
Thanks in advance

Right, I have now gone down the line of setting up a new user on my macbook, her own ID and then with the help of Mr google, I followed the steps of sharing my music, by moving my itunes media folder to a shared folder.
Now i got my music on her itunes libary but when i did a test download of an app, it wont show in the library. I have even done the 'transfer purchases'. and its still not showing. I am slowing loosing the will to live with it! I really need help.

Need help with new 8310

Just upgraded from earlier blackberry and have two problems I need help with!
First, in rearranging the icons my browser icon disappeared and I can't get it back even when I use the show all function. Any ideas?
Second, unlike my earlier blackberry, messages I sent from my office laptop are not appearing in my messages. What setting do I need to tweak? I like my blackberry to show all the messages sent from or received by the laptop.
Thanks.
Lauren

My BB setting was to not hide sent messages, but the problem I think has to do with the settings on syncing with my computer. Messages I send from the blackberry show up as sent - but I want the BB to match completely with the email on my computer - show every email received and every email sent. That was how the old BB was set up. Any ideas on what else to tweak either on the desktop or the BB? Thanks for your help.

Need help with new Time Capsule/Airport express setup!

I just hooked up a 500g time capsule to replace an airport extreme, and now my airport utility on my MacbookPro Retina no longer recognizes the airport expresses I had on my network for airplay purposes. Can anyone help with this issue?

Instead of a switch you need a wireless router, because your modem will only assign one public ip address to the switch and that ip address will be forwarded to any one computer at a given time...You should replace the switch with a wireless router and it should resolve your concern...

Need Help with new site glitches PLEASE!!!

I need help trouble shooting a website. The site is
www.farrowandwatkins.com. Nav buttons on Mac they display correctly
which is aligned at top and bottom of content to left on Home page.
However, when viewed on PC, the buttons spread to fill the
distance of the "Patients" Page. All the pages spread to this
length also, but are not suppose to.
Nav buttons have padding of 10 on bottom, except last one.
Please help if you can

First guess would be that there doesn't seem to be a fixed
height or width on the cell for the 'patients' button.

Need Help with fixing our Address book in Lync 2013 (cert issue?)

Updated our external (digicert) certificate last month. Tried doing it with the Certificate wizard but it failed and disconnected all our users from Lync. Had to restore the snapshot to get it
to work. Did some googling and found that I could just update IIS with the new cert and all is good.. YAY! (or so I thought.... )
Since then users are no longer able to download the address books (galcontacts etc).
If I put my client policy to websearchonly I cant look up anyone either.
If I test-csaddressbookwebquery it fails with a 500 internal server error
If I look at the IIS logs on the front end server I see many POST /groupexpansion/service.svc/WebTicket_Bearer lines getting 500 errors as well.
Also in the IIS logs /WebTicket/WebTicketService.svc/cert is 200 (OK?)
Also in the IIS logs when what I think are requests to get the delta files for the address book GET /abs/handler/C-13e1-13f8.lsabs gives a 401 error.
Finally (?) get-cscertificate lists 2 certs (both from our internal CA). One is used for Default,WebservicesInternal, WebservicesExternal and the othe ris the OAuthTokenIssuer.
Any thoughts would be really great.. I have been bangin on this since Tuesday.

What are you using as a reverse proxy? Sounds like your Front End was only using internal CA certs, so if they haven't expired you shouldn't need to change the cert assignment. Install the new digicert certificate on your reverse proxy (guessing the edge
probably expired as well?, so that cert will need to be updated.) On the Front End run the certificate wizard and assign the corresponding internal certs to the services to correct the changes you did in IIS.
My guess was the certificate wizard didn't like you assigning the digicert to the Webservices internal and default service due to an internal namespace or missing SAN entries.
You can use Digicert's
certutil on the server: https://www.digicert.com/util/ to
validate certificate installation (how to test Private Key and Revoke list: http://www.digicert.com/util/utility-test-private-key-and-revocation-status.htm).
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Need help with new email problem

Hi friends . . . I'm not sure if this is a forum that could help me figure out my new problem . . . but I'll give it a try. . .I need some help . . . My email is sometimes being sent to the wrong address. Instead of my Yahoo address, they're sent to AOL instead. At first I thought this was an eBay or Paypal problem, but other mail that I subscribe to is all of a sudden going to AOL instead of my Yahoo address . . .In all of these cases, the AOL address was never registered with the site. I'm not using an external POP mail program . . . just standard Yahoo mail with iMac and Firefox. Anyone have any clue what's going on . . . .thanks in advance for any help . . .

You're using Google Mail : you should have said that earlier. the more information you give, the faster the solution.
Then it's easy for you. Please read this article from the public knowledge base :
http://www.blackberry.com/btsc/KB10332
Duplicate sent email message arrives on BlackBerry smartphone when sent using Gmail
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Hard drive crash need help with new iTunes load and backup files

I have looked through the posts and not found my situation.
I had my iPhone synced to a PC computer and the hard drive crashed. I had an extensive library in iTunes, but none of the music was purchased online so I can't simply download it again. It was all from CD's, many of which belonged to friends. I now have an iMac. The music I like is still on my iPhone, but not on my new iMac. When I try to sync the iPhone with my iMac it wants to delete all the music on my iPhone. Is there any way to copy the music off my iPhone first - so I can add it back into my iTunes library?

Yes, luckily I have been in this situation.
You can download a free application that will take your music from your iPhone and place it onto your Macintosh HD.
One of these should suit your needs:
http://www.macupdate.com/app/mac/19890/ipoddisk
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CPjvvOiyr6gCFaNl7Aodm h6QIQ
http://www.headlightsoft.com/detune/
I hope this helped.

Need help with new replaced ipad 2!

My previous ipad 2 had some peoblem with hardware and I went to apple store, they replaced a new one for me.
But, the problem comes.
Does anyone know that if the apple care plan that I purchased with my previous ipad2 will follow the cover the new one?
If doesn't, do I need to purchase a new plan?! Or I just need to call to transfer the plan to my new one???

Is the AppleCare Protection Plan transferable?
Yes. If you choose to sell or give away your Apple product, you can also transfer the ownership of the AppleCare Protection Plan. Please see the AppleCare Protection Plan Terms and Conditions for complete details.
http://images.apple.com/legal/applecare/docs/081811_APP_English_NA_v5.4.pdf
10. Transfer of Plan
With Transfer of Covered Equipment to New Owner. Subject to the restrictions set
forth below, you may make a one-time permanent transfer of all of your rights under the
Plan to another party, provided that: (a) the transfer includes the original Proof of
Purchase, the Plan's Confirmation and all of the Plan's packaging material, including
printed materials and these Terms and Conditions; (b) you notify Apple of the transfer
by sending, faxing or e-mailing notice of transfer to Apple Inc., ATTN: Agreement
Administration, MS: 217AC, 2511 Laguna Blvd, Elk Grove, CA 95758, U.S., fax number
916-405-3655 or [email protected], respectively; and (c) the party receiving
the Plan accepts the Terms and Conditions of the Plan. When notifying Apple of the
transfer of the Plan, you must provide the Plan Agreement Number, the serial number of
the Covered Equipment being transferred and the name, address, telephone number and
email address of the new owner.
So basically talk to apple, tell them youi've swapped out devices, they'll do some 'paperwork' and notes online and your old plan should transfer to your new device

Need help with new website!

I have seen this on another website before, but this website
has been changed. Therefore, I cannot give an example of what I'm
showing, but I can try to explain it.
I would like to know how I can have a scroll list of videos.
I know how to create this, but I am unsure about how I can
make a video, when clicked, show up on the same page.
I do not at all want to have to make a seperate html page for
each video.
I am very novice, and I need your help.
Please post suggestions.

If you are very novice, then I think you are reaching too
far. You would
need to spend some time with the books before attempting to
do something
like this. Can you?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"provisionskate" <[email protected]> wrote
in message
news:evr2j4$4pr$[email protected]..
>I have seen this on another website before, but this
website has been
>changed.
> Therefore, I cannot give an example of what I'm showing,
but I can try to
> explain it.
>
> I would like to know how I can have a scroll list of
videos.
> I know how to create this, but I am unsure about how I
can make a video,
> when
> clicked, show up on the same page.
> I do not at all want to have to make a seperate html
page for each video.
> I am very novice, and I need your help.
> Please post suggestions.
>

Need help with new K8N Ne02

I just installed this board, coming from an nForce2. I'm trying to learn the new BIOS settings. Here are a few questions if you could help me out. I'm currently using BIOS 1.3. I have the beta 1.41 and 1.37. Which is best? See my sig for hardware details. BTW, I'm at work typing from memory from one night with the board looking for answers to employ when I get home tonight. I'm an experienced OCer, but new to this chipset.
1. Is there a pre-fetch option for the SATA controllers. If so, do I
want it on? Seems like I saw this but it's not in the on-line
manual.
2. Max Memlock? Auto?
3. High Performance Mode?
4. Agressive Timing?
5. HT Frequency? X * HTF 6. Where's the memory divider for asyncronous control?
7. There are two settings for the vcore voltage, but can't remember
what they're called. How do these work together? What's
considered the max safe, like 1.85v was on SocketA?
8. Any known PCI conflicts? Manual IRQ settings necessary? Which
slots are best?
9. Anything else I need to know?

1) Not in the BIOS - might be a registry tweak or implemented in the drive's firmware.
2) Depends if you're running a RAM divider
3) Set to "manual"
4) Depends if your RAM can handle it - best to leave off and tweak other settings manually
5) Generally, yes.
6) see 2) - Max memclock acts as the divider
7) They're fairly intuitive - you can set Vcore by either cpu Vid or manual, and then overvolt by the desired percentage.
8) Manual IRQ settings are virtually never needed anymore, and there shouldn't be a problem with conflicts.
9) Try the Overclocking forum.

Need help with new Mac Pro (2012)

Hi for everyone!
Few days ago, I bought a new Mac Pro (Mid 2012) MD770LL/A for my recording studio. The workstation is really powerfull and silent, but it has one major problem for me: computer comes with pre-installed Mac OS X 10.7.3 Lion, and as I understand, I can't install Mac OS X 10.6.8 on this machine. In this case, some plug-ins and instruments, that critical for my works are unavailable for me now. For example - MusicLab RealGuitar and RealLPC thru the VST to RTAS adapter (I'm using Pro Tools in my studio) don't working correctly on a Lion OSX. Unfortunately, I can't find any solution, to fix it... Even on an official support website of that software developers. Secondary, I still need Rosetta for some applications.
In that situation, my studio can't fully work.
So, what I should do??? WHY is officialy impossible to install Mac OS X 10.6.8 on a new Mac Pro, if its components is absolutely identic with Mac Pro 2010, that supported Mac OS X Snow Leo???
Thanks!
With a big hope for a help!
Alexey

Hi!
Good news for anyone, who wants to install Mac OS X 10.6.x on a Mac Pro 2012!!!
As it turned out, the original installation DVD disc from the Mac Pro 2010, fully compatible with Mac Pro 2012! The images of DVD is quite possible to find on the Internet. Just checked on my system - boot from the fresh-burned disc, and Mac OS X 10.6.4 installed without problems! After that, updated to 10.6.8 - and it works!
Personally for me - it is great news!
Everyone have a nice day! Thanks!:-)

Need Help With New iPhoto App

Hello,
I recently updated to the new Photos app and when I tried to open it and migrate my library an error popped up saying that I need at least 75 GB of space. I checked and had 55 GB free at the time. I went through and deleted a bunch of excess things like music, videos, documents, and unused apps. When I went back to check it said that I had only 52.56 GB of free space. I don't understand. This is now what my storage looks like.
So now it seems that after deleting things I have less space AND I still cannot migrate my photo library. I'm out of the country now and have many video projects that I need to do for work. As a side note, I don't use iCloud for my photos or videos. Not sure if that would have anything to do with it.
Thanks for any help!
Warmly,
Autumn Marie

The storage used in that display is only an estimate. What do you see, when you select your Macintosh HD in the Finder and look at the sizes in the "Finder > File > Get Info" panel for your harddisk? The free storage is shown in the General brick of the Info panel:
The migration may be needing more free storage, if your iPhoto Library has a corruuption and needs repairing.
Try the iPhoto Library First Aid Tools before you try to migrate the library again to Photos:
Make a backup copy on an external drive.
Then try the iPhoto Library First Aid Tools on your iPhoto Library to repair the permissions and to repair the database.
To repair hold down the alt/option and the command key simultaneously while double clicking the iPhoto application in the Applications folder to launch the iPhotos Library First aid tools. Hold down both keys firmly and long enough, until the First Aid panel will appear.
The select "Repair database". Repeat with "repair Permissions".
If it still does not suffice, repeat with "Rebuild Library".
Then try to migrate the library again to Photos by dragging it onto the Photos icon in the Dock.

Need help with new iMac

I got this new 21.5 imac mid 2011 with lion but my concern is sometimes I need to press the power button twice for the imac to power on. Once I had it on and shut it down it won't repeat the problem until I don't use it for a certain period of time. Can some help me with this?

you have 90 days of free telephone support from Apple trained employees from the day you bought your mac. Call AppleCare and see what they say: http://support.apple.com/kb/HE57

Need Help with new Classes / methods

Hi, I need to create a class called Proposition. It include a Proposition object with 3 variables
Name, Description, Value
This is the constructor I wrote:
private String name;
private String description;
private boolean value;
public Proposition(){
          name = "name";
          description = "description";
          value = false;
}Now I need a method that give values to the 3 variables in the proposition object:
     public Proposition setProp(String line){
          StringTokenizer ST1 = new StringTokenizer(line, ".");
          String ValidLine = ST1.nextToken()+".";
          StringTokenizer ST2 = new StringTokenizer(ValidLine, "=");
          name = CutSpace(ST2.nextToken());
          description = (ST2.nextToken()).trim();
          value = false;
          return name;
          return description;
          return value;
     }An example of String line is: v = we are in Vancouver.
When I run the program, I got error message with the 3 return statements saying found String/Boolean while Proposition is needed. I'm not quite sure how to write the return statements. Can any1 help?
Thx!

Your setProp() method should not be returning anything. After all it is setting not getting. So just declare it as
public void setProp(String line){and remove the return statements.

Need help with new url address

Similar Messages

Maybe you are looking for