Need help with opening groups folders in contacts after installing iOS 6

when i go to my group list in contacts I can not open any of them after updating iPhone 4 to iOS 6
only thing that happens when i click on a gruop name is to add or delete check mark
Please advice

The checks are meant to indicate which group of Contacts you want to see when you tap "Done." If you have one group checked and you press "Done" you should see the Contacts for that group. If you check more than one group, when you press "Done" you should see all Contacts for all the checked groups combined into a single list.
I'm afraid I still don't understand what is happening when you tap "Done" - provided you have at least one group checked, that should bring you back to the listing of Contacts.

Similar Messages

Need help with open hub

Hi eveybody,
I was trying to wok with open hub. Created infospoke, destination i gave was a csv file named d:/openmara.csv path, saved and activated the info spoke. I went to d:/ to view the uploaded files, two file was created, when i try to open a file it says "unable to read" , when i tried to open the second one i could open the file and see some datas but not in a correct format, why is that?
Then i tried to load the data in database, so in the infospoke i selected the option for destination as database,saved and activated the infospoke, now where should i go to see the uploaded datas physically?
Could anyone help me with this.
Thanks,
RR.

Hi,
Thanks for the reply. I created a infospoke and destination was database option. Opened the se16 gave the table name which starts with /bic/....(please correct me if i am wrong),then the initial screen of se16 came up with all the fields , but when i executed it, the table is empty.Could you say why it is happening.
Thanks,
RR.

I need help with opening attachment on email?

I need help to set association to open attachment on email?

First i would suggest update Reader to XI.
To set the default application you may visit this article: http://windows.microsoft.com/en-in/windows/change-default-programs#1TC=windows-7 this article is for windows 7 but it will hold good for vista too.
let me know the result.
~Ajlan Huda.

Need Help with Photomerge Group Shot

I'm trying to photomerge a group shot and having trouble with it. The person I'm trying to cut out of the source photo gets plopped into the middle of the final photo and I can't line her up with in final shot. Is there a way I can relocate the section that gets pasted into the final photo? I'm also have trouble with aligning the photo--how do you know what points to select in the fist and second photo? I've been playing with it, but the photos get terribly distorted.
Appreciate any help. I was expecting Photoshop Elements 10 to make this easy, and so far, it hasn't impressed me.
Thanks,
Terri

OK, here we go:
Make a selection (in the main image) of the area you want to be replaced:
Open your other image, select the head to use, and copy it to the Clipboard. (I simply used another one of the heads in this photo.)
Back in the main image, use Edit...Paste into Selection:
Change to the Move Tool and move the pasted-in image to where it looks best:
You already know what to do next with the Clone Tool. (Probably have to use Layer...Flatten Image to get rid of all the selections and layers so the Clone Tool can do its work....)
Ken
P.S., Looks like you did a real good job with the girl on the left.
P.P.S., The image is a bit too small for us to do precision work (but it's OK for this example). Next time you can try something about 2 or 3 times larger and see if the forum software accepts it.

Need Help With Work Group Wiki Page (404)

I am somwhat of a novice with all this server stuff so I will try to explain....
I have done a standard server install of OS X 10.5.6 Server on my Xserve. Everything seemed to work like a charm. The only problem I am having is when I select my home page to be my Workgroup Wiki page (inside the standard server prefences window). When I select this and try to test the page with the link under the drop down (open home page), it opens Safari and the header looks right but the page says "Not Found. 404: No group with that name (workgroup) hosted on this server).
I have a Workgroup and then two other groups....print and interactive. I want people to be able to log-on and see the main work group wiki page and then be able to select to go to one of the other two groups. I have had this working before but had to reformat my hard drive and reinstall the OS.
From the page that comes-up, I CAN click on the "groups" link in the header bar and that does take me to a working page, but I want to be able to have people go to this workgroup page first.
Any help would be MUCH appreciated. Thanks in advance.

Hi,
If you have the original index.html file installed in the /Library/WebServer/Documents/ folder then your wikid server will use it to display the web service groups.
If you have changed the index.html file or substituted a different index.html then wikid will not be able to perform its display action.
HTH,
Harry

Re: Need help with open a web page

Dear friend i cant open www.truperenlinea.com maybe you can support me because i install IE but other 5.2 version,
i dont want install parallel and Windows, you can try to open for me and explain me.
See the right side in the web need can see the username and password space to fill.
Thank you so much
Best regards

Sorry, I got confused.
You need to stick you your original post.
Please don't post in someone elses thread, especially when the thread is completely in the wrong place to begin with and you post has nothing to do with the original post.

Need Help With SQL GROUP BY and DISTINCT

I am working on a project and need to display the total of each order based on the order id. For instance I want to display the order id, customer id, order date, and then the extension price (ol_quantity * inv_price).
I would then like a total displayed for order # 1 and then move on to order #2.
Here is my SQL code :
SELECT DISTINCT orders.o_id, customer.c_id, inv_price * ol_quantity
FROM orders, customer, inventory, order_line
GROUP BY orders.o_id, customer.c_id, inv_price, ol_quantity
ORDER BY orders.o_id;
When my code is run it displays the order id, customer id and inv_price * quantity (extension price) but no order total for the order number and a new group is not started when a new order number is started....they are all clumped together.
Any help is greatly appreciated!!

Hi,
user12036843 wrote:
I am working on a project and need to display the total of each order based on the order id. For instance I want to display the order id, customer id, order date, and then the extension price (ol_quantity * inv_price).
I would then like a total displayed for order # 1 and then move on to order #2.
Here is my SQL code :
SELECT DISTINCT orders.o_id, customer.c_id, inv_price * ol_quantity
FROM orders, customer, inventory, order_line
GROUP BY orders.o_id, customer.c_id, inv_price, ol_quantity
ORDER BY orders.o_id;
When my code is run it displays the order id, customer id and inv_price * quantity (extension price) but no order total for the order number and a new group is not started when a new order number is started....they are all clumped together.
Any help is greatly appreciated!!Sorry, it's unclear what you want.
Whenever you post a question, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using.
Do you want the output to contain one row for each row in the table, plus an extra row for each distinct order, showing something about the order as a whole (e.g., total inv_price or average extension_price)? If so, you need GROUP BY ROLLUP or GROUP BY GROUPING SETS .
If you want one row of output for each row of the table, but you want to include something that reflects the group as a whole (again, e.g, total inv_prive or average extension_pcie), then you can us analytic functions. (Most of the aggregate functions, such as SUM and AVG have analytic counterparts that can get the same results without collapsing the result set down to one row per group.)
Here's an example of how to use GROUP BY GROUPING SETS.
Way we're interested in employees' salary and commission from the scott.emp table:
SELECT       deptno
,       ename
,       sal
,       comm
FROM       scott.emp
ORDER BY deptno
,            ename
;Output:
`   DEPTNO ENAME             SAL       COMM
        10 CLARK            2450
        10 KING             5000
        10 MILLER           1300
        20 ADAMS            1100
        20 FORD             3000
        20 JONES            2975
        20 SCOTT            3000
        20 SMITH             800
        30 ALLEN            1600        300
        30 BLAKE            2850
        30 JAMES             950
        30 MARTIN           1250       1400
        30 TURNER           1500          0
        30 WARD             1250        500Now say we want to add the total income (sal + comm, or just sal if there is no comm) to each row, and also to add a row for each department showing the total sal, comm and income in that department, like this:
`   DEPTNO ENAME             SAL       COMM     INCOME
        10 CLARK            2450                  2450
        10 KING             5000                  5000
        10 MILLER           1300                  1300
        10                  8750                  8750
        20 ADAMS            1100                  1100
        20 FORD             3000                  3000
        20 JONES            2975                  2975
        20 SCOTT            3000                  3000
        20 SMITH             800                   800
        20                 10875                 10875
        30 ALLEN            1600        300       1900
        30 BLAKE            2850                  2850
        30 JAMES             950                   950
        30 MARTIN           1250       1400       2650
        30 TURNER           1500          0       1500
        30 WARD             1250        500       1750
        30                  9400       2200      11600(This relies on the fact that ename is unique.) Getting those results is pretty easy, using GROUPING SETS:
SELECT       deptno
,       ename
,       SUM (sal)          AS sal
,       SUM (comm)          AS comm
,       SUM ( sal
           + NVL (comm, 0)
           )               AS income
FROM       scott.emp
GROUP BY GROUPING SETS ( (deptno)
                         , (deptno, ename)
ORDER BY deptno
,            ename
;Notice that we're displaying SUM (sal) on each row. Most of the rows in the output are "groups" consisting of only one row from the table, so the SUM (sa) for that goup will be the sal for the one row in the group.
Edited by: Frank Kulash on Nov 23, 2011 2:03 PM
Added GROUPING SET example

Need help with opening DatagramSocket

Hello I want to make a socket connection this is my code
public void run()
int s=0;
MakeConnection(s);
In MakeConnection I have thisvoid MakeConnection(int s) throws IOException
int port =1234;
DatagramSocket client = new DatagramSocket(port);
When I compile this code this is said
unreported exception java.io.IOException; must be caught or declared to be thrown.
Can anyone help me with this fault.
And is it possible to get
int s = client;
Because when I do it with c I can do
int s;
s = socket(AF_INET,SOCK_DGRAM,IPPROTO_UDP);
en than s is 10 on my computer and in my java code I need to receive s=10 too.

Do you know what exceptions are? If not, read about them in the Java Tutorial:
http://java.sun.com/docs/books/tutorial/essential/exceptions/index.html
In the method run(), you call the method MakeConnection(), which might throw an IOException.
Since IOException is a checked exception, you must in the method run() specify what you're going to do when an IOException happens. You must either catch the exception (put the call to MakeConnection in a try / catch block) or indicate that run() can throw an IOException by specifying it at the beginning of the method:
public void run() throws IOException { ...
But note that you'll just be moving the problem to the method that calls run(). Somewhere in your program you must catch and handle the exception.

Need help with missing hotmail folders?

I'm missing folders from Hotmail when moving into Mail on my iMac using 10.8. The Hotmail inbox comes up, but not other folders that I've created. I also have an iPad; all the foldes came up in it. Does anyone have a clue?

Niel,
I think I must have done something wrong. I printed out your instructions, then quit Safari and did as directed, after which both the "Old Safari" and the new Safari folder (with the old files dragged to it) appeared in ~Library/. Since the Old Safari folder was now empty, I put it in Trash, then opened Safari again--and discovered that all my bookmarks were gone (Preferences were exactly as before).
Thinking I could just put things back the way they were, I quit Safari and copied the files in the new "Safari" folder, then pulled "Old Safari" out of Trash, placed the originals back in "Old Safari," and renamed it "Safari," as before. (I renamed the new Safari file, which now contains the copies, "Safari-Copy.") However, the bookmarks didn't reappear in the application.
Hoping I could restore them from the Library folder, I looked for "Import" in the File menu because I had just imported my bookmarks to a new MacBook with OS 10.4, but I guess OS 10.3.9 doesn't have that feature. I can restore the bookmarks manually from the other computer, but it will take a long time. Do you know if there's a way to undo whatever I did wrong and get my bookmarks back?

Need Help with an Group By Count

I'm having some difficulties with a query.
My results are as follows:
Acct_num - Route_ID - Service
12345678 - 1112222 - Gas -
12345678 - 1112222 - H20 -
12345678 - 3334444 - Elec -
98765432 - 8889999 - Gas -
98765432 - 8889999 - H20 -
98765432 - 8889999 - Elec -
What i need to do is write a script that will show me, any acct_num's where the route_id is different. All Route_id's should be the same for all services, but in some cases, they were entered incorrectly and i need to find the invalid ones, so i can correct them.
Ideally, i would only like to see one row, but if i can just get my results to show me all the acct_num for the ones where the route_id is different, that would be a great start
I have been trying to use a distinct and do a count on the acct_num, but my counts are ignoring the distinct.
This is the code i have been using so far, but i don't think it is on the right path:
SELECT distinct SA.SERVICE_ACCOUNT_NUMBER,
       MR.METER_ROUTE_ID,
--       ECAT.SERVICE_TYPE--,
       count(SA.SERVICE_ACCOUNT_NUMBER) as ACCT_NUM_COUNT
FROM SERVICE_ADDRESS SADD,
     SERVICE_ACCOUNT SA,
     SERVICE_SERVICE_ACCOUNT SSA,
     EQUIPMENT E,
     EQUIPMENT_CLASS EC,
     EQUIPMENT_CATEGORY ECAT,
     EQUIPMENT_LOCATION EL,
     EQUIPMENT_LOCATION_EQUIP ELE,
     EQUIPMENT_LOCATION_ROUTE ELR,
     EQUIPMENT_TYPE ET,
     METER_ROUTE MR
WHERE SADD.SERVICE_ADDRESS_ID = SA.SERVICE_ADDRESS_ID
AND SSA.SERVICE_ACCOUNT_NUMBER = SA.SERVICE_ACCOUNT_NUMBER
AND SSA.END_DATE IS NULL
AND SSA.SERVICE_ID = E.CURRENT_SERVICE_ID
AND ET.EQUIPMENT_CLASS = EC.EQUIPMENT_CLASS
AND EC.EQUIPMENT_CATEGORY = ECAT.EQUIPMENT_CATEGORY
AND EL.EQUIPMENT_LOCATION_ID = ELR.EQUIPMENT_LOCATION_ID
AND EL.EQUIPMENT_LOCATION_ID = ELE.EQUIPMENT_LOCATION_ID
AND ELE.EQUIPMENT_ID = E.EQUIPMENT_ID
AND E.EQUIPMENT_TYPE_ID = ET.EQUIPMENT_TYPE_ID
AND EC.EQUIPMENT_CATEGORY LIKE '%METER'
AND ELE.END_DATE IS NULL
AND MR.METER_ROUTE_ID = ELR.METER_ROUTE_ID
AND SA.SERVICE_ACCOUNT_NUMBER IN (6051, 124899)
GROUP BY SA.SERVICE_ACCOUNT_NUMBER, MR.METER_ROUTE_ID
--HAVING COUNT(sa.service_account_number) > 1thanks in advance

If you take your query more or less as it is:
select <code> SA.SERVICE_ACCOUNT_NUMBER,MR.METER_ROUTE_ID</code>
FROM (rest of your query) take your query more or less as it is:
select <code> SA.SERVICE_ACCOUNT_NUMBER,MR.METER_ROUTE_ID</code>
FROM (rest of your query) and then wrap around it:
select <code>SERVICE_ACCOUNT_NUMBER</code>,count(*)
from (your query above)
GROUP BY saervice_account_number
having count(*) > 1
that should give you what you want.
The inner query gives you all of the account#/route combinations.
The outer query picks those account#s with more than one route.
Jon

Need help with opening ports on airport extreme

My vonage phone is connected to airport extreme router, voice quality of phone calls was poor. Vonage tech support says vonage port on my airport extreme was closed and i need to open it.
Here is my chat details with vonage tech support-
The following ports are needed for Internet communication between the Vonage adapters and the Vonage servers.
SIP: Port 5061 UDP
RTP (Voice) Traffic: Ports 10000-20000 UDP. When a call is made, a random port between 10000 and 20000 is used for RTP (Voice) traffic. If any of these ports are blocked, you may experience one way or no audio.
Please do suggest me the way to open the ports on airport extreme
Thanks
Venki

Instructions for opening ports is here.
https://discussions.apple.com/docs/DOC-3415
You should be fine opening the whole range, 10000-20000

Need help with open folder (in Explorer) and click on Toggle Transparency Grid

hi guys, can i with Extended script enable Toggle Transparency Grid ? i try using app.executeCommand( app.findMenuCommandId(Toggle Transparency Grid));and nothing.
and also can i some how open folder in windows explorer via Extended script? i try google but find only examples for web-javascript.....
thx

Actually your command should consist quotes. It will look like this:
app.executeCommand(app.findMenuCommandId("Toggle Transparency Grid"));
But I`ve tried, and it doesn`t do what you need, because it launches Adobe Anywhere.
Solution for second question is:
var path = "C:/Program Files/Adobe/Adobe After Effects CC/Support Files/";
var cmd;
cmd = "";
if($.os.indexOf("Win") != -1){
cmd = "explorer " + String(path);
}else{
cmd += (("open \"" + String(path)) + "\""); // change var path for Mac
try {
system.callSystem(cmd);
}catch (e){
alert(e);

ITunes does not recognise iPhone 3G (version 4.2.1) and need help with how to transfer photos, contacts and/or messages PLEASE??

Can i use wifi to transfer contacts, photos, messages etc- how??

Try this one and see if it helps:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes, Sync and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Need help with copying group policy links to a new OU

Good Morning everyone. I hope you can help (pretty sure you can). I am working on a powershell script to copy the OU structure from an existing OU and create a new one and then apply the same group policies to the newly created OU. I have the creation portion
working fine. The script creates the OU and all sub OU's however I have not been able to figure out how to get the GP links to copy from anything other than the root OU. I found this snippet online but I can only get it to work on the root of the
OU. The full script is at the bottom. Right now I am just manually applying the links but I would like to not have to edit this script every time a new GPO is created so I want it to read all of the GP links from the whole OU structure like the
first part of the full script does. Thanks in advance for any and all help!
Roger
import-module GroupPolicy
$SourceOU = "Computers"
$DestinationOU = "OU=computers,OU=MSP,OU=NA,DC=testeucs,DC=local"
[xml]$gpos = Get-GPOReport -all -ReportType xml
foreach ($gpo in $gpos.gpos.gpo) {
if ($gpo.LinksTo.SOMName -eq $SourceOU) {
New-GPLink -Name $gpo.name -Target $DestinationOU
#--------Config
$RegionOU = Read-Host "Enter Region: NA, ASIA, or EULA"
$NewSiteOU = Read-Host "Enter name of new site"
$sourceOU = "OU=NBKWin7,OU=NA,DC=testeucs,DC=local"
$destinationOU = "OU=$NewSiteOU,OU=$RegionOU,DC=testeucs,DC=local"
$DestCompOU = "ou=Computers,$destinationOU"
$DestUserOU = "OU=Users,$destinationOU"
#--------Main
$adPath= "LDAP://" + $destinationOU
import-module activedirectory
Import-Module GroupPolicy
#Create OUs
$objDomain=New-Object System.DirectoryServices.DirectoryEntry($adPath)
$ObjSearch=New-Object System.DirectoryServices.DirectorySearcher($ObjDomain)
[array] $OUs = @()
$OUs = dsquery * $sourceOU -Filter "(objectCategory=organizationalUnit)" -limit 0
$OUsorted = $OUs | sort-object { $_.Length}
for ($k=0; $k -le $OUsorted.Count -1; $k++)
$OUtoCreate = ($OUsorted[$k] -replace $sourceOU,$destinationOU).ToString()
$OUSearch = ($OUtoCreate -replace '"',"").ToString()
$ObjSearch.Filter = "(&(objectCategory=organizationalUnit)(distinguishedName="+ $OUSearch + "))"
$allSearchResult = $ObjSearch.FindAll()
if ($allSearchResult.Count -eq 1)
"No changes were done on = " + $OUtoCreate
else
dsadd ou $OUtoCreate
"OU Creation = " + $OUtoCreate
New-GPLink -Name KerberosDESEncryption -Target $destinationOU -Domain testeucs.local -LinkEnabled Yes -Order 1
New-GPLink -Name WIN8_InternetExplorer -Target $destinationOU -Domain testeucs.local -LinkEnabled Yes -Order 2
New-GPLink -Name WIN7_DCMSENABLE -Target $DestCompOU -Domain testeucs.local -LinkEnabled Yes -Order 1
New-GPLink -Name DNS_Suffix -Target $DestCompOU -Domain testeucs.local -LinkEnabled Yes -Order 2

Here is how to get the current GPO links so you can copy them:
http://gallery.technet.microsoft.com/scriptcenter/Get-GPlink-Function-V13-b31253b4
¯\_(ツ)_/¯

Need help with opening file

Hi All,
I have several files like the one below that Apple transferred from my old PC to my macbook when I bought it. I would like to open them up and see what is in them but do not know how. They do not open with iPhoto. If I try to I get a window saying unreadable script.
Here is the window when i try to open with iphoto:
I am currently with 10.6. When the files were imported from the old PC I was at 10.5. I'd like to open them to see if I want to keep them or not.
Thanks
Ron

I got your last reply about the incompatability via e-mail notification. However I could not open a new window to respond directly.
Anyway, I have been able to open most of the old PC stuff but I have not paid attention as to what file types work or not. Sounds like your correct though with the incompatability.
Thanks
ROn

Need help with opening groups folders in contacts after installing iOS 6

Similar Messages

Maybe you are looking for