Need help with output type EDI for ERS
All,
I want to be able to run and ERS settlement and have the invoices created sent via EDI/XML to the supplier. I have several questions on the set up.
1) I have output type ERS6 which is defined as ERS EDI. I assume because it does not start with Z* this is SAP standard, so I shouldn't have to modify any of this.
2) I've added my supplier to this output type.
3) I assume I need to create a partner profile for this supplier? If so can someone tell me the message type to use?
Is there any set up I'm missing in this process? I've executed ERS but do not get an idoc and I'm fairly certain it's because I haven't done the partner profile set-up.
Thanks for your help.
Sandra
Hi,
You don't have to modify thise setup unless you have any customized requirement.
You are missing partner profile setup.Carry out the setup and run MRRL tcode to create the idocs
Enter the following values using tcode WE20.
Field Value
Message type GSVERF
Partner type LI (vendor)
Partner function LF (vendor)
Port SUBSYSTEM ( Port to your middleware)
Output mode such as Collect IDocs
Basic type GSVERF01
Application MR
Output type ERS6 or the type you have defined
Regards,
Karuna
Similar Messages
-
Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.
You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.
-
I think I need help with driver (software) settings for D110a
I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05) -
I need help with downgradeing my ios for my ipod touch 4th gen
i need help with downgradeing my ios for my ipod touch 4th gen
As has alwys been the case, you cannot go back.
Sorry -
Need Help with data type conversion
Hello People,
I am new to java, i need some help with data type conversion:
I have variable(string) storing IP Address
IPAddr="10.10.103.10"
I have to call a library function which passes IP Address and does something and returns me a value.
The problem I have is that external function call in this library excepts IP Address in form of a byte array.
Here is the syntax for the function I am calling through my program
int createDevice (byte[] ipAddress).
now my problem is I don't know how to convert the string IPAddr variable into a byte[] ipAddress to pass it through method.Class InetAddress has a method
byte[] getAddress() You can create an instance using the static method getByName() providing the IP address string as argument. -
Subquery results need help with output
Requirements:
There is request to dump every days data from one table into text file.
Tables:INSPECTION_RESULTS
NJAS
Primary Key: RES_SYS_NO
Parent table: INSPECTION_RESULTS
Child table: NJAS
Purpose:
1. obtain output results for the MIN and MAX RES_SYS_NO from INSPECTION_RESULTS table for yesterdays date.
2. Create comma delimited file for following columns using above table data output.
Script thus far:
SELECT NJA_RES_SYS_NO||','||NJA_TEST_REC_NO||','||NJA_LIC_ST_ID||','||NJA_ETS_ID||','||NJA_SW_VER||','||NJA_TECH_ID||','||NJA_VIN||','||NJA_LIC_NO||','
||NJA_LIC_JUR||','||NJA_LIC_SRC||','||NJA_MODEL_YR||','||NJA_MAKE||','||NJA_MODEL||','||NJA_VHCL_TYPE||','||NJA_BODY_STYLE||','||NJA_CERT_CLASS||','||
NJA_GVWR||','||NJA_ASM_ETW||','||NJA_ETW_SRC||','||NJA_NO_OF_CYL||','||NJA_ENG_SIZE||','||NJA_TRANS_TYPE||','||NJA_DUAL_EXH||','||NJA_FUEL_CD||','
|| NJA_VID_SYS_NO||','|| NJA_VRT_REC_NO||','|| NJA_ARMSTDS_REC_NO||','|| NJA_RSN_F_N_TESTABLE||','|| NJA_DYNO_TESTABLE||','||
NJA_CURR_ODO_RDNG||','|| NJA_PREV_ODO_RDNG||','|| NJA_PREV_TEST_DT||','|| NJA_TEST_TYPE||','||
NJA_TEST_START_DT||','|| NJA_TEST_END_TIME||','|| NJA_EMISS_TEST_TYPE||','|| NJA_TEST_SEQ_NO||','
||NJA_LOW_MILE_EXEMP||','||NJA_TIRE_DRY||','|| NJA_REL_HUMID||','|| NJA_AMB_TEMP||','||NJA_BAR_PRESS||','|| NJA_HCF||','||
NJA_GAS_CAP_ADAP_AVL||','|| NJA_GAS_CAP_REPL||','|| NJA_OVERALL_GAS_CAP_RES
FROM NJAS
WHERE NJA_RES_SYS_NO IN (SELECT MIN(NJA_RES_SYS_NO) FROM INSPECTION_RESULTS WHERE NJA_RES_SYS_NO IN
(SELECT MAX(NJA_RES_SYS_NO) FROM INSPECTION_RESULTS, (SELECT SYSDATE-1 FROM DUAL))
It works but not sure if I am getting accurate results. Can anyone help me fine tune this subquery script? Thanks!
ScottDuplicate post
See my answer in your other posting here Re: need help with script -
[solved]Need help with a bash script for MOC conky artwork.
I need some help with a bash script for displaying artwork from MOC.
Music folders have a file called 'front.jpg' in them, so I need to pull the current directory from MOCP and then display the 'front.jpg' file in conky.
mocp -Q %file
gives me the current file playing, but I need the directory (perhaps some way to use only everything after the last '/'?)
A point in the right direction would be appreciated.
thanks, d
Last edited by dgz (2013-08-29 21:24:28)Xyne wrote:
You should also quote the variables and output in double quotes to make the code robust, e.g.
filename="$(mocp -Q %file)"
dirname="${filename%/*}"
cp "$dirname"/front.jpg ~/backup/art.jpg
Without the quotes, whitespace will break the code. Even if you don't expect whitespace in any of the paths, it's still good coding practice to include the quotes imo.
thanks for the tip.
here it is, anyhow:
#!/bin/bash
filename=$(mocp -Q %file)
dirname=${filename%/*}
cp ${dirname}/front.jpg ~/backup/art.jpg
then in conky:
$alignr${execi 30 ~/bin/artc}${image ~/backup/art.jpg -s 100x100 -p -3,60}
thanks for the help.
Last edited by dgz (2013-08-29 21:26:32) -
Hi Gurus,
I have a requirement to create a print program to trigger the messages which are in waiting status when fulfill some conditions.
requirememt as follows:
Heading: Invoice data (ICB for purchased goods) via IDOC
1. Within Replenishment process the invoice is send by IDOC.
There are two cases:
a.process the Idoc immediately, if the Inco terms are ex works
b.create the Idoc, but donu2019t process it immediately
When the inbound shipping notification is in the system and the fields u201Ddateu201D (LIKP-PODAT) and u201Ctimeu201D (LIKP-POTIM) has been filled, the invoice Idoc ( step 2 ) can be posted.
2. The message output is set on dispatch time 3 ( send with application own transaction )
3. New message type is needed for these kind of invoice
4. A new print program check all messages which are still waiting for process and check, if the Inco term is maintained in table Y11L1_34_MM_BART with X in field PROC_IM or the fields in table LIKP-PODAT and LIKP-POTIM are filled (means goods are in the warehouse). When one of these checks are fulfilled, process the Idoc.
I dont understand,, I didnot work on the output types..
As per my understadin there are output types when they run some transtion in yellow and they are triggered immediately,
now they want to collect all the output types(messages) anmd trigger them when fulfilled the two conditions above.
I see in NACE , the application V3 and a z output type,
my question is:
can you provide me a sample program if you have come across , Ithinkn a print program neeed to be developed and assing in the NACE transaction.
Please let me know the procedure for doing this.
thanks & regards,
NazeerHi,
Have a reference to the standard program "RSNAST00" which is used for triggering the output types.
Regards
Vinod -
Hi i need help with getting my homework for school
im in a nine week class that ends tommorw and need help go\etting my program working properly these are the requirements ofr the assignments:
Modify the Inventory Program by adding a button to the GUI that allows the user to move
to the first item, the previous item, the next item, and the last item in the inventory. If the
first item is displayed and the user clicks on the Previous button, the last item should
display. If the last item is displayed and the user clicks on the Next button, the first item
should display.
· Add a company logo to the GUI using Java graphics classes.
Modify the Inventory Program to include an Add button, a Delete button, and a Modifybutton on the GUI. These buttons should allow the user to perform the corresponding actions on the item name, the number of units in stock, and the price of each unit. An item added to the inventory should have an item number one more than the previous last item. Add a Save button to the GUI that saves the inventory to a C:\data\inventory.dat file. Use exception handling to create the directory and file if necessary. Add a search button to the GUI that allows the user to search for an item in the inventory by the product name. If the product is not found, the GUI should display an appropriate message. If the product is found, the GUI should display that products information in the GUI. Post final .class and .java files as an attachment.
this is what i have there are three java files im puttong in here
first is the panel frame
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.*;
import java.text.NumberFormat;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
private JPanel buttonJPanel; // panel to hold buttons
private JButton buttons[]; // array of buttons
private JLabel label1; // JLabel iventory number
private JLabel label2; // JLabel product name
private JLabel label3; // JLabel product price
private JLabel label4; // JLabel product in stock
private String p_ProductName; // private variable for the employee name.
private int p_UnitCount; // private variable for the hours worked.
private double p_UnitPrice; // private variable for the hourly wage.
private int p_ItemNumber; // private inventory number
//create inventory object
Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
label1.setToolTipText( "This is Inventory number" );
add( label1 ); // add label1 to JFrame
label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
label2.setToolTipText( "This is Product Name" );
add( label2 ); // add label1 to JFrame
label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
label3.setToolTipText( "This is product Price");
add( label3 ); // add label1 to JFrame
label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
label4.setToolTipText( "This is Quanity in stock: " );
add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
String names[] = { "First", "Previous", "Next", "Last" };
JButton buttons[] = new JButton[ names.length ];
// create and add buttons
for ( int count = 0; count < buttons.length; count++ )
buttons[ count ] = new JButton( names[ count ] );
buttonJPanel.add( buttons[ count ] ); // add button to panel
} // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
URL url = this.getClass().getResource("book103.gif");
Image img = Toolkit.getDefaultToolkit().getImage(url);
// scale the image so that it'll fit in the GUI
Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
// create a JLabel with the image as the label's Icon
Icon logoIcon = new ImageIcon(scaledImage);
JLabel companyLogoLabel = new JLabel(logoIcon);
companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
// add the logo to the GUI
getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFramethis is the original part again with the code tag added
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.;
import java.text.NumberFormat;
import javax.swing.;
import java.awt.;
import java.awt.event.;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
private JPanel buttonJPanel; // panel to hold buttons
private JButton buttons[]; // array of buttons
private JLabel label1; // JLabel iventory number
private JLabel label2; // JLabel product name
private JLabel label3; // JLabel product price
private JLabel label4; // JLabel product in stock
private String p_ProductName; // private variable for the employee name.
private int p_UnitCount; // private variable for the hours worked.
private double p_UnitPrice; // private variable for the hourly wage.
private int p_ItemNumber; // private inventory number
//create inventory object
Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
label1.setToolTipText( "This is Inventory number" );
add( label1 ); // add label1 to JFrame
label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
label2.setToolTipText( "This is Product Name" );
add( label2 ); // add label1 to JFrame
label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
label3.setToolTipText( "This is product Price");
add( label3 ); // add label1 to JFrame
label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
label4.setToolTipText( "This is Quanity in stock: " );
add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
String names[] = { "First", "Previous", "Next", "Last" };
JButton buttons[] = new JButton[ names.length ];
// create and add buttons
for ( int count = 0; count < buttons.length; count++ )
buttons[ count ] = new JButton( names[ count ] );
buttonJPanel.add( buttons[ count ] ); // add button to panel
} // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
URL url = this.getClass().getResource("book103.gif");
Image img = Toolkit.getDefaultToolkit().getImage(url);
// scale the image so that it'll fit in the GUI
Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
// create a JLabel with the image as the label's Icon
Icon logoIcon = new ImageIcon(scaledImage);
JLabel companyLogoLabel = new JLabel(logoIcon);
companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
// add the logo to the GUI
getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFrame -
Need help with date range searches for Table Sources in SES
Hi all,
I need help, please. I am trying to satisfy a Level 1 client requirement for the ability to search for records in crawled table sources by a date and/or date range. I have performed the following steps, and did not get accurate results from Advanced searching for date. Please help me understand what I am doing wrong, and/or if there is a way to define a date search attribute without creating a LOV for a date column. (My tables have 500,00 rows.)
I am using SES 10.1.8.3 on Windows 32.
My Oracle 10g Spatial Table is called REPORTS and this table has the following columns:
TRACKNUM Varchar2
TITLE Varchar2
SUMMARY CLOB
SYMBOLCODE Varchar2
Timestamp Date
OBSDATE Date
GEOM SDO_GEOMETRY
I set up the REPORTS table source in SES, using TRACKNUM as the Primary Key (unique and not null), and SUMMARY as the CONTENT Column. In the Table Column Mappings I defined TITLE as String and TITLE.
Under Global Settings > Search Attributes I defined a new Search Attribute (type Date) called DATE OCCURRED (DD-MON-YY).
Went back to REPORTS source previously defined and added a new Table Column Mapping - mapping OBSDATE to the newly defined DATE OCCURRED (DD-MON-YY) search attribute.
I then modified the Schedule for the REPORTS source Crawler Policy to “Process All Documents”.
Schedule crawls and indexes entire REPORTS table.
In SES Advanced Search page, I enter my search keyword, select Specific Source Group as REPORTS, select All Match, and used the pick list to select the DATE OCCURRED (DD-MON-YY) Attribute Name, operator of Greater than equal, and entered the Value 01-JAN-07. Then the second attribute name of DATE_OCCURRED (DD-MON-YY), less than equals, 10-JAN-07.
Search results gave me 38,000 documents, and the first 25 I looked at had dates NOT within the 01-JAN-07 / 10-JAN-07 range. (e.g. OBSDATE= 10-MAR-07, 22-SEP-07, 02-FEB-08, etc.)
And, none of the results I opened had ANY dates within the SUMMARY CLOB…in case that’s what was being found in the search.
Can someone help me figure out how to allow my client to search for specific dated records in a db table using a single column for the date? This is a major requirement and they are anxiously awaiting my solution.
Thanks very much, in advance….raford,
Thanks very much for your reply. However, from what I've read in the SES Admin Document is that (I think) the date format DD/MM/YYYY pertains only to searches on "file system" sources (e.g. Word, Excel, Powerpoint, PDF, etc.). We have 3 file system sources among our 25 total sources. The remaining 22 sources are all TABLE or DATABASE sources. The DBA here has done a great job getting the data standardized using the typical/default Oracle DATE type format in our TABLE sources (DD-MON-YY). Our tables have anywhere from 1500 rows to 2 million rows.
I tested your theory that the dates we are entering are being changed to Strings behind the scenes and on the Advanced Page, searched for results using OBSDATE equals 01/02/2007 in an attempt to find data that I know for certain to be in the mapped OBSDATE table column as 01-FEB-07. My result set contained data that had an OBSDATE of 03-MAR-07 and none containing 01-FEB-07.
Here is the big issue...in order for my client to fulfill his primary mission, one of the top 5 requirements is that he/she be able to find specific table rows that are contain a specific date or range of dates.
thanks very much! -
I am still using CS3. A while back I received an error: "Licensing for this product has stopped working" for my CS3 programs. I used the recovery program suggested by Adobe and was able to get Illustrator, Flash and Dreamweaver to work, but I still can't open Photoshop or In Design. I went back to the Adobe site and did every other trick they suggested to fix the error, but nothing has worked.
I then tried to uninstall photoshop from my CS3 suite (so I could reinstall) but got a JavaScript Alert: "Critical errors were found in set up. Please see set up log for file details." Seeing as I am not the best with the behind the scenes technical stuff, I have no idea what this means or where the set up log even is. Any help anyone can provide?
I have had CS3 installed on my computer for over a year. I started having problems about 4 months ago.I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?
-
Hi,
I need some help getting my film in sync to a D5.
The film was shot on MiniDV and edited drop frame (29.97).
What we did first is output on miniDV and dubbed that to a D5 for color correction. Everything was in sync with the timeline. Then my friend color corrected. Since then several shots have been replaced, not effecting the timing at all. We checked that everything was hitting at the same timecodes and everything was cool.
Now I've output another tape onto MiniDV and tried to dub it to D5 but the shots are not hitting at the same timecode. They assure me that everything is drop frame on their end. Not sure what might be causing the problem. Not sure what to try next?
Need suggestions and ideas.
thanks.if you had a downconvert from your "color corrected d5" you could place it in the timeline and see whats up.
-
Need Help with command line arguments for a class method
Hey guys,
I'm fairly new to programming in java.
I want to a write a class method that adds up its command line arguments which are numbers. For example, if the input was .... 5 2 3....then the output would be 10.
I have been told to use the Convert to convert a string to a double. I'm ok for writing the class method but I have no idea how to use Convert and why I need it in the method.
Can anybody help please?Hey guys,
I'm fairly new to programming in java.
I want to a write a class method that adds up its
command line arguments which are numbers. For
example, if the input was .... 5 2 3....then the
output would be 10.Okay. So you would receive the numbers to add as the String[] argument to a main method. The steps are simple:
1) declare a variable for the count
2) for each String in the array:
2.1) extract the value as a double
2.2) add this to the count
3) output the resulting count
I have been told to use the Convert to convert a
string to a double.
I'm ok for writing the class
method but I have no idea how to use ConvertThere is no class Convert in the Java API.
and why
I need it in the method. Do you understand you need to somehow convert each String to a double (step 2.1)? Since Convert is unknown to me, maybe you should just take a look at class Double. It can help you do step 2.1, the rest should be trivial enough.
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Double.html
Give it a go and feel free to post back with a specific problem you are having, accurately described if you please :-) -
Need help with QoS config/setup for my home network.
I have a home network that spans two buildings, has and FTP download server, VoIP phones,and several computers among other IP devices. I run a home based business where my clients get access to the company FTP download server (NOT illegal file sharing). the problem is that when they are downloading files my VoIP takes a big hit and gets choppy when speaking to my customers. Below is the layout of the network.
Our Internet access is Verizon 4G, there are no other options available at this time or we would switch. The Verizon 4G MiFi connects to a TP-Link wifi router that then connects to port fa0/5 on the Office 3550PoE switch. There is a trunk between the Office switch to the House 3550PoE switch. The House switch then connects to the Shop 3524XL switch also using a trunk. Please note that EVERYTHING works fine other than the VoIP issue, VoIP makes and receives calls without connections issues.
Auto QoS has been run on the Office switch ports fa0/1 and fa0/2 as well as on the House switch ports fa0/3 and fa0/5. There is NO auto QoS on the 3524XL
What is the best way to give VoIP traffic top priority over FTP and web browsing when going out port fa0/5 on the Office Switch? Over the internal network we are not having any call quality issues between the IP phones, just calls to our SIP provider. Yes, I understand that once calls exit the Office switch to the TP-Link wifi router there will not be any QoS. But, if I can give priority to the packets at the layer 3 Office switch (or wherever you suggest) then at least I will not have to kill a users FTP download while I am on the phone.
Thank YouI can make ANY changes necessary, just need to know what to do.
First, did you notice the output of the command sh mls qos fa0/5 above? Is it working correctly?
Next, Yes I do have version W17 and can install if if needed. The lost of possible commands I listed above was from the conf t - config interface fa0/x level. There is class and policy mapping commands the the config global level along with all these other commands:
aaa Authentication, Authorization and Accounting.
access-list Add an access list entry
alias Create command alias
arp Set a static ARP entry
banner Define a login banner
boot Boot Commands
buffers Adjust system buffer pool parameters
cdp Global CDP configuration subcommands
cgmp Global CGMP configuration commands
class-map Configure QoS Class Map
clock Configure time-of-day clock
cluster Cluster configuration commands
default Set a command to its defaults
default-value Default character-bits values
downward-compatible-config Generate a configuration compatible with older software
enable Modify enable password parameters
end Exit from configure mode
errdisable Error disable
exception Exception handling
exit Exit from configure mode
file Adjust file system parameters
help Description of the interactive help system
hostname Set system's network name
interface Select an interface to configure
ip Global IP configuration subcommands
line Configure a terminal line
logging Modify message logging facilities
mac-address-table Configure the MAC address table
map-class Configure static map class
map-list Configure static map list
mvr Enable/Disable MVR on the switch
no Negate a command or set its defaults
ntp Configure NTP
policy-map Configure QoS Policy Map
power power configuration
priority-list Build a priority list
privilege Command privilege parameters
queue-list Build a custom queue list
rmon Remote Monitoring
scheduler Scheduler parameters
service Modify use of network based services
shutdown Shutdown system elements
snmp-server Modify SNMP parameters
spanning-tree Spanning Tree Subsystem
stackmaker Specify stack name and add its member
tacacs-server Modify TACACS query parameters
tftp-server Provide TFTP service for netload requests
time-range Define time range entries
udld Configure global UDLD setting
username Establish User Name Authentication
vmps VMPS settings
vtp Configure global VTP state -
[SOLVED] Need help with rEFInd boot entry for rsync backup
I made a successful backup my arch install to an other internal SSD disk (from my HDD).
But now I can't figure out how to make a boot entry for this drive. The wiki only mentions GRUB, which I do not use.
This is the fstab for my HDD:
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda5
UUID=c1822e3c-e037-4445-bdd8-b71778237dee / ext4 rw,relatime,data=ordered 0 1
# /dev/sda2 LABEL=SYSTEM_DRV
UUID=D2DF-9F74 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
And this is the fstab on my SSD which I edited:
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sdb1
UUID=c61a1301-4728-465d-b40b-bde5e084eb50 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda2 LABEL=SYSTEM_DRV
UUID=D2DF-9F74 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
But I'm not sure about the /boot entry, do I need something else here?
Afterward I tried updating rEFInd by reinstalling using refind-install, but that did not work.
ps. I dual boot with Windows.
Last edited by Devenda (2014-08-18 07:58:07)I also tried adding the menu entry manually by editing refind.conf but that didn't work. I got:
Invalid loader file!
Error: Not Found while loading vmlinuz-linux
Here is some additional info:
refind.conf:
menuentry "SSD Arch Linux" {
icon /EFI/refind/icons/os_arch.png
volume "ArchSSD"
loader /boot/vmlinuz-linux
initrd /boot/initramfs-linux.img
options "root=/dev/sdb1 ro"
I hope this helps.
blkid
/dev/sda1: LABEL="WINRE_DRV" UUID="7C2ADD1D2ADCD4EC" TYPE="ntfs" PARTUUID="b7137819-2ca6-40fb-9167-b73ac37d8d96"
/dev/sda2: LABEL="SYSTEM_DRV" UUID="D2DF-9F74" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="9c77b526-730f-42f9-9904-f9a31b205687"
/dev/sda3: PARTLABEL="Microsoft reserved partition" PARTUUID="f4d5275b-24c1-4847-b937-345bc23bec89"
/dev/sda4: LABEL="Windows 8" UUID="38D6E449D6E408C8" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="d777a359-f42c-4629-a07c-cc55316352fe"
/dev/sda5: UUID="c1822e3c-e037-4445-bdd8-b71778237dee" TYPE="ext4" PARTUUID="3d282004-2515-4630-b82e-35ed7f707b89"
/dev/sda6: UUID="F80680CC06808D76" TYPE="ntfs" PARTUUID="575bc623-c7f1-44da-a79e-220ce3c98d9b"
/dev/sda7: LABEL="Lenovo_Recovery" UUID="0898D76B98D75632" TYPE="ntfs" PARTUUID="99bfc6d6-1b71-46d1-887e-2f7e65e3eab1"
/dev/sdb1: LABEL="ArchSSD" UUID="c61a1301-4728-465d-b40b-bde5e084eb50" TYPE="ext4" PARTUUID="e87704a5-01"
lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ntfs WINRE_DRV 7C2ADD1D2ADCD4EC
├─sda2 vfat SYSTEM_DRV D2DF-9F74 /boot
├─sda3
├─sda4 ntfs Windows 8 38D6E449D6E408C8
├─sda5 ext4 c1822e3c-e037-4445-bdd8-b71778237dee /
├─sda6 ntfs F80680CC06808D76
└─sda7 ntfs Lenovo_Recovery 0898D76B98D75632
sdb
└─sdb1 ext4 ArchSSD c61a1301-4728-465d-b40b-bde5e084eb50
sr0
boot tree
/boot
├── BOOT
│ └── boot.sdi
├── BOOTSECT.BAK
├── EFI
│ ├── Boot
│ │ ├── bootx64.efi
│ │ ├── LenovoBT.EFI
│ │ ├── License.txt
│ │ └── ReadMe.txt
│ ├── gummiboot
│ │ └── gummibootx64.efi
│ ├── Lenovo
│ │ └── Boot
│ │ ├── BCD
│ │ ├── BCD.LOG
│ │ ├── BCD.LOG1
│ │ ├── BCD.LOG2
│ │ ├── bg-BG
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── bootmgfw.efi
│ │ ├── bootmgr.efi
│ │ ├── BOOTSTAT.DAT
│ │ ├── boot.stl
│ │ ├── cs-CZ
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── da-DK
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── de-DE
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── el-GR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── en-GB
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── en-US
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── es-ES
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── et-EE
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── fi-FI
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── Fonts
│ │ │ ├── chs_boot.ttf
│ │ │ ├── cht_boot.ttf
│ │ │ ├── jpn_boot.ttf
│ │ │ ├── kor_boot.ttf
│ │ │ ├── malgun_boot.ttf
│ │ │ ├── malgunn_boot.ttf
│ │ │ ├── meiryo_boot.ttf
│ │ │ ├── meiryon_boot.ttf
│ │ │ ├── msjh_boot.ttf
│ │ │ ├── msjhn_boot.ttf
│ │ │ ├── msyh_boot.ttf
│ │ │ ├── msyhn_boot.ttf
│ │ │ ├── segmono_boot.ttf
│ │ │ ├── segoen_slboot.ttf
│ │ │ ├── segoe_slboot.ttf
│ │ │ └── wgl4_boot.ttf
│ │ ├── fr-FR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── hr-HR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── hu-HU
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── it-IT
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── ja-JP
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── ko-KR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── lt-LT
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── lv-LV
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── memtest.efi
│ │ ├── nb-NO
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── nl-NL
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── pl-PL
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── pt-BR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── pt-PT
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── qps-ploc
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── Resources
│ │ │ ├── bootres.dll
│ │ │ └── en-US
│ │ │ └── bootres.dll.mui
│ │ ├── ro-RO
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── ru-RU
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── sk-SK
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sl-SI
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sr-Latn-CS
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sv-SE
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── tr-TR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── uk-UA
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── zh-CN
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── zh-HK
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ └── zh-TW
│ │ ├── bootmgfw.efi.mui
│ │ ├── bootmgr.efi.mui
│ │ └── memtest.efi.mui
│ ├── Microsoft
│ │ └── Boot
│ │ ├── BCD
│ │ ├── BCD.LOG
│ │ ├── BCD.LOG1
│ │ ├── BCD.LOG2
│ │ ├── bg-BG
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── bootmgfw.efi
│ │ ├── bootmgr.efi
│ │ ├── BOOTSTAT.DAT
│ │ ├── boot.stl
│ │ ├── cs-CZ
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── da-DK
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── de-DE
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── el-GR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── en-GB
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── en-US
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── es-ES
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── et-EE
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── fi-FI
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── Fonts
│ │ │ ├── chs_boot.ttf
│ │ │ ├── cht_boot.ttf
│ │ │ ├── jpn_boot.ttf
│ │ │ ├── kor_boot.ttf
│ │ │ ├── malgun_boot.ttf
│ │ │ ├── malgunn_boot.ttf
│ │ │ ├── meiryo_boot.ttf
│ │ │ ├── meiryon_boot.ttf
│ │ │ ├── msjh_boot.ttf
│ │ │ ├── msjhn_boot.ttf
│ │ │ ├── msyh_boot.ttf
│ │ │ ├── msyhn_boot.ttf
│ │ │ ├── segmono_boot.ttf
│ │ │ ├── segoen_slboot.ttf
│ │ │ ├── segoe_slboot.ttf
│ │ │ └── wgl4_boot.ttf
│ │ ├── fr-FR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── hr-HR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── hu-HU
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── it-IT
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── ja-JP
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── ko-KR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── lt-LT
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── lv-LV
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── memtest.efi
│ │ ├── nb-NO
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── nl-NL
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── pl-PL
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── pt-BR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── pt-PT
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── qps-ploc
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── Resources
│ │ │ ├── bootres.dll
│ │ │ ├── en-US
│ │ │ │ └── bootres.dll.mui
│ │ │ └── nl-NL
│ │ │ └── bootres.dll.mui
│ │ ├── ro-RO
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── ru-RU
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── sk-SK
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sl-SI
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sr-Latn-CS
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sr-Latn-RS
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sv-SE
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── tr-TR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── uk-UA
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── zh-CN
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── zh-HK
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ └── zh-TW
│ │ ├── bootmgfw.efi.mui
│ │ ├── bootmgr.efi.mui
│ │ └── memtest.efi.mui
│ ├── refind
│ │ ├── icons
│ │ │ ├── arrow_left.png
│ │ │ ├── arrow_right.png
│ │ │ ├── boot_linux.png
│ │ │ ├── boot_win.png
│ │ │ ├── func_about.png
│ │ │ ├── func_exit.png
│ │ │ ├── func_firmware.png
│ │ │ ├── func_reset.png
│ │ │ ├── func_shutdown.png
│ │ │ ├── os_altlinux.png
│ │ │ ├── os_arch.png
│ │ │ ├── os_centos.png
│ │ │ ├── os_chrome.png
│ │ │ ├── os_clover.png
│ │ │ ├── os_debian.png
│ │ │ ├── os_ecomstation.png
│ │ │ ├── os_fatdog.png
│ │ │ ├── os_fedora.png
│ │ │ ├── os_freebsd.png
│ │ │ ├── os_freedos.png
│ │ │ ├── os_funtoo.png
│ │ │ ├── os_gentoo.png
│ │ │ ├── os_gummiboot.png
│ │ │ ├── os_haiku.png
│ │ │ ├── os_hwtest.png
│ │ │ ├── os_kubuntu.png
│ │ │ ├── os_legacy.png
│ │ │ ├── os_linuxmint.png
│ │ │ ├── os_linux.png
│ │ │ ├── os_lubuntu.png
│ │ │ ├── os_mac.png
│ │ │ ├── os_mageia.png
│ │ │ ├── os_mandriva.png
│ │ │ ├── os_manjaro.png
│ │ │ ├── os_mythbuntu.png
│ │ │ ├── os_netbsd.png
│ │ │ ├── os_openbsd.png
│ │ │ ├── os_opensuse.png
│ │ │ ├── os_redhat.png
│ │ │ ├── os_refind.png
│ │ │ ├── os_refit.png
│ │ │ ├── os_slackware.png
│ │ │ ├── os_suse.png
│ │ │ ├── os_ubuntu.png
│ │ │ ├── os_unknown.png
│ │ │ ├── os_win.png
│ │ │ ├── tool_apple_rescue.png
│ │ │ ├── tool_memtest.png
│ │ │ ├── tool_mok_tool.png
│ │ │ ├── tool_part.png
│ │ │ ├── tool_shell.png
│ │ │ ├── tool_windows_rescue.png
│ │ │ ├── transparent.png
│ │ │ ├── vol_external.png
│ │ │ ├── vol_internal.png
│ │ │ └── vol_optical.png
│ │ ├── icons-backup
│ │ │ ├── arrow_left.png
│ │ │ ├── arrow_right.png
│ │ │ ├── boot_linux.png
│ │ │ ├── boot_win.png
│ │ │ ├── func_about.png
│ │ │ ├── func_exit.png
│ │ │ ├── func_firmware.png
│ │ │ ├── func_reset.png
│ │ │ ├── func_shutdown.png
│ │ │ ├── os_altlinux.png
│ │ │ ├── os_arch.png
│ │ │ ├── os_centos.png
│ │ │ ├── os_chrome.png
│ │ │ ├── os_clover.png
│ │ │ ├── os_debian.png
│ │ │ ├── os_ecomstation.png
│ │ │ ├── os_fatdog.png
│ │ │ ├── os_fedora.png
│ │ │ ├── os_freebsd.png
│ │ │ ├── os_freedos.png
│ │ │ ├── os_funtoo.png
│ │ │ ├── os_gentoo.png
│ │ │ ├── os_gummiboot.png
│ │ │ ├── os_haiku.png
│ │ │ ├── os_hwtest.png
│ │ │ ├── os_kubuntu.png
│ │ │ ├── os_legacy.png
│ │ │ ├── os_linuxmint.png
│ │ │ ├── os_linux.png
│ │ │ ├── os_lubuntu.png
│ │ │ ├── os_mac.png
│ │ │ ├── os_mageia.png
│ │ │ ├── os_mandriva.png
│ │ │ ├── os_manjaro.png
│ │ │ ├── os_mythbuntu.png
│ │ │ ├── os_netbsd.png
│ │ │ ├── os_openbsd.png
│ │ │ ├── os_opensuse.png
│ │ │ ├── os_redhat.png
│ │ │ ├── os_refind.png
│ │ │ ├── os_refit.png
│ │ │ ├── os_slackware.png
│ │ │ ├── os_suse.png
│ │ │ ├── os_ubuntu.png
│ │ │ ├── os_unknown.png
│ │ │ ├── os_win.png
│ │ │ ├── tool_apple_rescue.png
│ │ │ ├── tool_memtest.png
│ │ │ ├── tool_mok_tool.png
│ │ │ ├── tool_part.png
│ │ │ ├── tool_shell.png
│ │ │ ├── tool_windows_rescue.png
│ │ │ ├── transparent.png
│ │ │ ├── vol_external.png
│ │ │ ├── vol_internal.png
│ │ │ └── vol_optical.png
│ │ ├── keys
│ │ │ ├── altlinux.cer
│ │ │ ├── canonical-uefi-ca.der
│ │ │ ├── fedora-ca.cer
│ │ │ ├── openSUSE-UEFI-CA-Certificate.cer
│ │ │ ├── refind.cer
│ │ │ └── SLES-UEFI-CA-Certificate.cer
│ │ ├── refind.conf
│ │ ├── refind.conf.old
│ │ ├── refind.conf-sample
│ │ └── refind_x64.efi
│ └── tools
├── grub
│ ├── grub.cfg
│ └── grub.cfg.example
├── initramfs-linux-fallback.img
├── initramfs-linux.img
├── loader
│ ├── entries
│ │ └── arch.conf
│ └── loader.conf
├── refind_linux.conf
└── vmlinuz-linux
refind_linux.conf
"Boot with standard options" "ro root=UUID=c1822e3c-e037-4445-bdd8-b71778237dee quiet "
"Boot to single-user mode" "ro root=UUID=c1822e3c-e037-4445-bdd8-b71778237dee quiet single"
"Boot with minimal options" "ro root=UUID=c1822e3c-e037-4445-bdd8-b71778237dee"
Maybe you are looking for
-
Strange Plug-In Behavior CS4 - Opening from Bridge
Hello, I think that this is the right forum, but it could be bridge instead. I've moved my Photoshop CS4 to my new Win 7 64 bit PC. I am having a very strange situation with my optional Plug-ins and Bridge. This us with the x86 32 bit version. Wh
-
Hooking up a WRT54G router.
I was going to hook up my wireless router, well it wont pick up connect. It works but i cant get on the internet. i been putting that cd in and it works but it wont pick the connection up from my CABLE Modem. I dont know why, But the thing is i got 2
-
Passport and Time Machine...when to detach Passport from Laptop
Do I need to keep my Passport attached to my MacBook Pro at all times, with Time Machine ON? Thought it was bad to keep Passport constantly attached in case of computer failure.
-
Does anybody know if the new calender widget in Feature Pack 1 on other Belle devices will be released for the E7? The default, 1 line widget, is useless but the new one has 3 lines and you can scroll through appointments and days, making it much mor
-
I want to save an instrument I created in GB 5.0.2, but it won't show up in
It won't show up in the menu. I get this error: You have chosen not to show your own settings. If you save the file now it won't show in the browser unless you change your view options in the Track Info window. Pretty annoying - I didn't "chose" to n