Need help with overcloccking by AMD AHTLON II X2 250 AND MSI 770-C45

hello i have overcloccing my cpu to 3.6GHz but it not posible to overclocck in bios to 3.9ghz? i have use Easy OC swiths to do this but how i overcloccing more?
AMD AHTLON II X2 250 AND MSI 770-C45

Quote from: willythecat on 09-September-11, 02:54:08
I went into task manager, selected view, cpu history, and then one graph per cpu. Then selected performance, which shows two graphs under cpu usage history, so l assume that's the two cores!
Looks like both cores are operating then.
Quote from: willythecat on 09-September-11, 02:54:08
- in your opinion do you think that l have got a better deal in the AMD Athlon II X2 as opposed to Sempron 140 single core?
Of course. Having two cores rather than one will give a nice boost. Particularly when multitasking for example. You'll notice a difference in various applications too, such as when gaming, video editing and photo editing.
Quote from: willythecat on 09-September-11, 02:54:08
- if l did flick the dip switch on the mobo to up the FSB by 10% will it change the dual core from 3.0 MHz to 3.3MHz?
I'm not into overclocking so not the person to ask really.

Similar Messages

  • Need help with error: No bootable device -- insert boot disk and press any key

    Hello, I need help will my laptop and the error, the message says "no bootable device ", I have tried taking out the hard drive but it still doesn't work. My laptop is a Satillite C55D-A5372. I need help with this; if you know about this ans know how to fix it please reply or email me @ [email protected]
    If needed more clarifications ask me.
    Thank you,
    Jkmano

    if you got into the bios/uefi and have determined that the hdd is being detected then that is good.  At least the hdd is operating to some extent, although still may be corrupt OS or the like.
    Eagle asked you what OS your using (i.e., Windows 8.1 64-bit, Windows 7 32-bit, etc.).  I see that English is not your native language so we'll just have to work with that as best we can. 
    Did you make any changes to the operating system (OS) as a result of the link you posted, and what were they? 
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • My need help with my iphone. i got up yesterday morning and the phone was completely off. Also, is not charging problem because it was charge before that happen.c

    I need help with my iphone. For some reason is off completely and refusing to come on. I believe is not charging problem, because it was charge before that happen.

    You have posted under MacBook Pro.
    I have asked the administrators to relocate this post to the iPhone section where it is more likely to get a helpful response.  

  • Need help with automating text import/pasting/macro between Photoshop and Excel

    Hey everyone,
    I'm working on a large project now that seems extremely daunting, but I was hoping there would be some way to automate it using either Actions or some sort of macro program.  Here's the gist:
    I've created a template with 24 differently sized text boxes in the photoshop image file.  Each text feild has unique text that needs to be be pasted into it, which has been compiled in excel.  This wouldn't be too dificult to do, except I have to recreate this image and all 24 text fields aproximately 350 times.  None of the text boxes will remain static through all 350 images as text is the title, description, and demographic ratings/percentages/data for the topic of each image.  I did something similar manually last year and it took me about 3, non-stop 18 hour days to complete it.
    (the test template)
    Can anyone think of any way I could automate this process?  I'm thinking some sort of macro that copies cell 1 in excel, switches to photoshop, opens layer 1, pastes, switches back to excel, goes to cell 2, copies, back to photoshop, layer 2, pastes, etc, etc, then does a 'save as' in photoshop and revets to PS layer 1, EX cell 1 (on tab 2) to start the process all over again.  I have no idea if this would work or if there is another way to do this but I would really appreciate any help or advice you guys could give.  I don't have really any expreience using PS Actions or macro programs/scripts, so I may be over my head or overlooking a really simple way to do this.  If there's a way to do it, I'm persistent enough to figure it out and get it working. Doesn't really matter how it gets done, I just need to fill those text boxes as best as I can and as quickly as I can.
    Any help you all could give is really appreciated.

    Have you read up on the Variables support in Photoshop?

  • Need help with loading Windows 7 onto Macbook Pro - Bootcamp and parallels

    Hi,
    I have a windows PC and changing over to a Mac. I purchased today Parallels and Microsoft Office for Mac in order to use them on the MacBook.
    Also please note - I need to use Bootcamp for some programs that I need to use - and then also be able to use parallels.
    Where I am up to at the moment is - since there is no disc drive on the laptop where I can insert the disc - I have gone onto my PC and downloaded the Windows 7  usb/dvd download tool setup - however I dont know where I find the ISO file for Windows 7? So if someone could help me with that.
    Alternatively - can someone please let me know if I can just pay and download Window 7 for Mac - and then run it through boot camp etc. If someone can please give me some advice on this - and also a handy step by step guide on how to achieve it.
    Thank you so much in advance for your help!!!! I really appreciate it!
    K

    Thanks Clinton  - When I went into Apple store today, I told him about the programs my husband needs to use for a CBUS course. The guy there said his room mate has done the same thing and cannot use parallels for the programs they need to run (it doesnt seem to work properly) so he is using boot camp to run them and it works fine. So I am wanting to run Boot camp first and then once the course is finished run everything through parallels. 
    So I have gone into Boot Camp - and because there is no Disc drive I cannot insert the disc - so I have gone back onto the PC to put windows onto a USB to then use with Bootcamp. I just cannot find the ISO file path for Windows.
    I hope this all makes sense!
    I am thinking I maybe i will buy the windows ISO file instead of trying to hunt it down on the PC. Do you think this is the best way to do it?

  • HT1338 I need help with numbers. I try to open numbers and I get a message stating that I need an update. When I go to update apple say I am up to date, but I still can't open numbers. I keep going around and circles. Help

    I cannot open numbers. When I click to open the message says that, I need to update. When I go to updates is says I am updated. I keep going around and circles. Can anyone help?

    Look in your Applications folder for the new version.
    Remove the old icon from the Dock and drag down the new one for ease of use.

  • Need help with volume I can't get rid of and terminal

    I own a external HD named "elements". One day a second volume appeared named "elements". Every time I tried to save files to my external HD they were written on this mysterious volume. The volume isn't showed on my desktop - only when I try to save something with Opera (browser) or in the terminal I can see it.
    I renamed my external HD so I can write files to it. So far so good.
    But how can I get rid of this volume? The finder does not show it. Spotlight does noch find it. Only in the terminal I can see this volume and I can see the files in it.
    the terminal command "diskutil eject /volumes/elements" or "diskutil unmount force /volumes/elements" did not help.
    what can I do?

    It sounds like a "false clone" was created on your internal HD, which can happen if the target volume of a backup program becomes unavailable during the copy process.
    Try this:
    First eject and disconnect all external drives, then:
    Finder>Go menu> Go to Folder
    enter /Volumes and click Go
    Don't touch the alias to your internal HD volume, or any other alias.
    If you see "elements," and it is NOT an alias, trash it and empty the trash.
    jd

  • HT204088 I need help with my password I forgot the alternative email and securtity question answers

    I have an itunes account and my children keep charging my credit card .  I need to change my password but......
    I don't remember the alternative email address used and don't remember the security question answers.

    First off, all caps is considered shouting. Bad idea.
    As for your actual question -- a bit more information is required. Do you need to change the password for your user account? Your user account is what you login to when you turn on your computer. It might be setup so you don't have to enter your username and password when you boot up. It is set this way if you can turn it on, and when it's done starting, you see a desktop and dock and can use your programs. On the other hand, you might have to enter your username (either by typing or clicking on your icon) and then your password. After doing that you will be at the desktop.
    If you can't get to the desktop be, it means you aren't typing the password correctly. Passwords are case sensitive -- perhaps you just need to turn caps-lock off -- e.g., "PASSWORD" is not the same as "password" and if your password is set to something like the latter, typing the former will always fail. If you don't know the password, you can reset it by booting from the system install discs (put in system disc, hold down "c" while turning on the computer, ignore the open popup regarding installation, from the menu, choose the option for resetting the password, choose the user you wish to reset, and then enter a new password).
    On the other hand, if you get to your desktop and can use programs, the above is not your problem. Instead, you are having a problem loging into your mail account because you don't know your password. In that case, your only option is to contact the mail service provider and ask for your password. That issue has nothing to do with your operating system.

  • Need help with G450 battery: Stuck at 0%, claims 9x% and not charging

    Okay, there have been a couple similar posts but they don't provide a definitive answer so I am going to ask again.
    A few days ago, I put my computer in sleep mode with a low battery. When I woke it up, it froze and I had to force shutdown. Since then, whenever I unplug the computer, it loses power instantly, indicating that the battery is not powering it. However, my system can still tell when the battery is inside or not. When it is inside, it tells me I have "97% available (plugged in, not charging)", where the 97% slowly decreases over time (at first I had 99%).
    What is the problem here? How do I solve it? The "plugged in not charging" issue seems to be fairly common, but the fact that my battery is drained and the way that I got to this point seem somewhat exceptional. If it comes down to buying a new battery, that is not a problem - I could use the extra battery life, and they're pretty cheap.
    SPECS: I am using Windows 7 on a Lenovo G450 and do not appear to have Lenovo Power Management software. My AC adapter appears to work just fine.
    Solved!
    Go to Solution.

    hi serpinium,
    Welcome to the Lenovo Forums.
    Based from your findings, I suspect a faulty battery.
     -- it's possible that the battery circuit inside is not working to unload the charge, or one of the battery already reached its life span.
     -- there's also a chip inside that handles how the battery gets charges and checks the charge level of each battery (both are controlled by a firmware) -- ti's also possible that this chip is malfunctioning.
    Batteries degrade overtime due to heat and daily use. If you had this battery for more than a year then perhaps it's time to get a replacement battery.
    More info:
    How Lithium-ion Batteries Work
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Re: Need help with this assignment. Please see my code and give me tips/advice.

    And your question is?
    My comment so far is:
    You need to be specific in your questions and use code tags.

    And your question is?
    My comment so far is:
    You need to be specific in your questions and use
    code tags.My comment so far is:
    Start coding...

  • Need help with this annoying "determining gapless playback information" freeze and crash error to having to hard reset my computer! Someone please help

    Haven't been able to use itunes for at least 2 months now. I went to upload a newly downloaded album and now itunes freezes on "determining gapless playback information" every single time! Then i have to hard reset my mac every time as well, which i have done a good 30+ times now.  Someone please help me out, it would be much appreciated. i just want to listen to my music again. Apple support is useless and just want money when it's there fault it has happened anyway by applying that useless 'determining' non sense. Please help!

    This is the "iTUnes for windows" forum, If your doing this on a mac, you may get better help in the "iTUnes for mac" forums

  • I need help with boot camp. "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."

    This message appears every time I try to partition my disk:
    "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
    I verified my Macintosh HD disk on Disk utility and then tried to repair it, but I am unable to click the repair button.
    It says it's not available because the startup disk is selected.
    I don't know what to do or how to go about both these problems.
    Please, any suggestions?

    This message appears every time I try to partition my disk:
    "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
    I verified my Macintosh HD disk on Disk utility and then tried to repair it, but I am unable to click the repair button.
    It says it's not available because the startup disk is selected.
    I don't know what to do or how to go about both these problems.
    Please, any suggestions?

  • NEED HELP WITH MY ACCOUNT!!!​!!!!!!!!!

    Hi, I REEEAAALLLY need help with my account, I only have one account and never made another one but it says I'm not on a administrator account, it says I have an unknown type account, and I can't figure out how to make it an administrative account, what should I do?
    -Dexter

    Hi, I REEEAAALLLY need help with my account, I only have one account and never made another one but it says I'm
    not on a administrator account, it says I have an unknown type account, and I can't figure out how to make it an
    administrative account, what should I do?
    -Dexter

  • Need help with a button

    Hello,
    I need help with a button. I created a button and set it up
    so that when you click and hold it, the button becomes lighter in
    color (I used Alpha). I want the button to stay this light color
    after i release the click. Right now it goes back to the normal
    color when I release the click. Can somone help we this?
    Thanks!

    rpofclt wrote:
    > Hello,
    >
    > I need help with a button. I created a button and set it
    up so that when you
    > click and hold it, the button becomes lighter in color
    (I used Alpha). I want
    > the button to stay this light color after i release the
    click. Right now it
    > goes back to the normal color when I release the click.
    Can somone help we
    > this?
    you can't use the button itself if you want to maintain the
    DOWN state after
    release as button automatically resets itself once the mouse
    lives the HIT zone.
    Use movie clip instead and on press simply send it to a frame
    where there
    is DOWN state like image.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Need help with installing on Photosmart C7280 all-in-one

    I did have my printer installed, and was using the printer for 3 laptops wireless within my home.  Now I can not even find my Backup disk, so i need help with downloading the software to use my printer, and also get it back to being used wireless.   I do not know what happened, but the fax for this printer is listed, just not the printer itself.   please help!
    This question was solved.
    View Solution.

    Click here to download the software for your printer:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3204785&lc=en&cc=us&dlc=en&lang=en&cc=us
    chose the appropriate operating system that corresponds to your computer and download the full feature software.
    Please click on KUDOS if you find my solution helpful.

Maybe you are looking for