Need help with overclocking my x58 pro-e

hi i have this new mb from msi and i need help fixing stability issues :
ok here i go i did the normal oc to 3.1 that needed nothing voltage wise so now i need to go pro ^^ so plz help me out and 1 more thing if u know any thing about ssd and ide mode or there is any thing better plz help me out :>
ok i tried oc it to 4.2 it runs fine tell it hangs some times and freezes or even do some restarts on its own the usual i mean for a fail oc :P if u could help me out setting up my oc in a pro way i would love u for ever ^^
specs r writing down under ^^

OK i m back guys and sorry i took so long i tried some new O.C and i got so far as 3.7 on my cpu i saw that i had like really bad heat on the cpu on OCCT/prime and other testing programs i easily got to 95+ witch i stoop not wanting to know where it will hit :P
then i opened my pc yanked the motherboard out removed the cooler and the IOH cooler cleaned them both up reapplied the Thermal Grease witch came with my Thermaltake ISGC-400 and for extra cooling i add a sec fan on top of the cooler fan (yes it made some extra noise but it works :P ) rebuild it and tried again and the result was :
ideal temp: 60+ / load temp: 95+ / IOH temp: 85-95+ // and now :
SAME !!!! but the IOH dropped like a charm to 55 maybe 65 max .
so i know it was time to google some webpages and i saw some photos of CPU-Z all showing low core voltage and by low i mean the standard core i7 920 voltages ! mine was given by the auto bios setting so i continued searching tell i found out the higher the V.core is the high hte numbers are on the sensors !
i found out that a standard voltage will take me to 4GHz of speed so i tried it on my 3.7 (current speed )
and the result was lets just say WOW ! i think :
ideal temp 38+ / load temp: 83 (prime95) / IOH temp : 55-60 (after the cleaning / rergreasing)
so i tried it with my game (wow) and it never raise more than 65 max ! so if i over clocked it to 4K i dont think i will ever overheat it never the less i have a temp montering it with a max 85 on the alarm .
so far my tests and errors :
Multiplier= x21
bus speed = 177
voltages:
QPI: 1.30
CPU V.core : 1.28ish i cant realy tell from the bios
CPU PLL: 1.82ish same thing
speedstep=off/turbo=off/C1E=off/execute = off /over speed protection=off /V.tech=off/HPET=on(so numbers wont play much on cpu-z)
now for ram :
3x6 ratio ( in bios in windows it shows 2:6 for some reason ) DRAM frequency is showing 531 Mhz
9.9.24.88
V=1.5
any thing above these settings will crash the pc/not booting at all and i feel its not a stable system now ether so tell me what im doing wrong here please since there was a post just about like me in this forum but the man who made it never got back to you :> ty and realy sorry for the long post ^^

Similar Messages

Idiot needs help with hanging mac book pro please

can anyone please help me
i have a 13 inch 2013 macbook pro but since yesterday every 30/40 seconds if im trying the spinner circle thing comes up and even now I'm trping faster than my mac can keep up
iv installed nothing recently
im really stuck where to go from here
really sorry if I'm vague but I'm not a computer genius
if all fails then i have to take it back to apple
thanks for any help

EtreCheck version: 2.1.5 (108)
Report generated 3 January 2015 17:53:58 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2:36:51
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (635.73 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R   UJ-8A8 disk2 : (329.8 MB)
disk2s1 (disk2s1) <not mounted> : 287 MB
disk2s1s1 (disk2s1s1) <not mounted> : 32 KB
Untitled Disc (disk2s1s2) /Volumes/Untitled Disc : 286 MB (0 B free)
USB Information: ℹ️
Western Digital External HDD 160.04 GB
WD USB 2 (disk3s1) /Volumes/WD USB 2 : 160.04 GB (64.46 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[loaded] com.divx.dms.agent.plist [Support]
[loaded] com.divx.update.agent.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.tunabellysoftware.TGFanHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.divx.agent.postinstall.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive Application (/Applications/Google Drive.app)
Safari Application (/Applications/Safari.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video> [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Perian [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      19% Finder
      2% WindowServer
      0% AppleSpell
      0% DesktopServicesHelper
      0% mds_stores
Top Processes by Memory: ℹ️
429 MB iPhoto
198 MB Finder
180 MB iTunes
144 MB com.apple.WebKit.WebContent
112 MB mds_stores
Virtual Memory Information: ℹ️
1.97 GB Free RAM
4.26 GB Active RAM
1.32 GB Inactive RAM
1.03 GB Wired RAM
3.49 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 3, 2015, 03:18:42 PM Self test - passed
Jan 1, 2015, 02:04:03 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-01-01-140403_[ redacted].cpu_resource.diag [Details]

Need Help with Javascript for Acrobat Pro 9

Hello,
I am creating a PDF form in Adobe Acrobat Profession 9. Not having a lot of experience with Javascript, I have found this forum very helpful and have used many of the script examples for other issues I have had. I was hoping someone could help with the following script, I have tried many variations, cannot get it to work.
var ratio = this.getField("ratio").value
var concentration = this.getField("concentration").value
var result = this.getField("result").value
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value".value>=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
This is just a piece of the code The concentration values run from 61 through 99 and the ratio value varies for each concentration value, there is a high ratio and a low ratio. The result of this field with populate the results field with a PASS or FAIL. This is not working......any help is greatly appreciated!

Thanks George. I updated the script to:
// Get a reference to the result field
var ratio = this.getField("ratio");
// Get a reference to the result field
var concentration = this.getField("concentration");
// Get a reference to the result field
var result = this.getField("result");
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value >=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
However, I am still getting a FAIL result even when the ratio is 50.00 or equal to the passable ratio.

Need help with 24fps in Premiere Pro CS4

I am having issues working with 24fps imported video. My computer hardware is an AMD dual core processor running at 2.6GHz. It has 2GB of Kingston Hyper-X memory, 2x 300GB hard drives (not RAID), and an Nvidia 7900GS video card with 256MB video ram. My operating system is Windows Vista Ultimate with SP1. I am running Premiere Pro CS4 with all the current updates.
So here is the issue I am having. I captured video on a Canon XL2 in 24fps, 16:9 widescreen, and 2:3:3:2 pulldown. My CS4 project settings were set up as DV-24P Widescreen 48KHz. I did not try changing other settings on the other tabs. I captured the video directly from the XL2 with no dropped frames. The resulting AVI plays back in Windows Media Player 11 correctly. What I mean by that is the is no jerky video, I get no raster lines, and the video quality is very clear. When I load the video into the time line and play it back in the program monitor the video jerks like it is dropping frames, I get raster lines and it looks like video clarity fades in and out.
At first I thought nothing about it. I used Adobe Media Encoder, and burned a DVD. Playback on my widescreen TV looked jerky, rastered, and the video was only clear in static scenes. So I made some test projects with different settings. Still had no success. The original capture looks good, but whatever I do in Premiere the video jerks and looks like old VHS video.
I did another test. I set the XL2 to 30P and 4:3, and captured the video. Again the captured AVI looks good. Put it on the Premiere timeline and played it in the program monitor. It plays fine - good video quality, no rastering, and no jerking. Made a DVD with no problems in the video. So my question is what setting in Premiere do I need to capture, edit, and export 24fps 16:9 widescreen video so that it plays back with with the same video quality as it was captured? Do you think it is an encoder problem? The captured AVI is what ever encoder came with Windows/Premiere as I have not added any other encoders.
Any help would be apperciated. If I have not supplied enough information, please just ask.

If the video is playing back badly in Premiere Pro from the timeline, then the things I would check would be the program monitor quality - is it set to highest...if you don't know where that it is, click on the 4 horizontal lines in the top corner of the program monitor - make sure highest quality is selected. It also may be a video card issue - are your drivers up to date? If the clips are only playing back badly on the PPro timeline (and anything exported from it), but fine in Windows Media Player - something is up.
As for the frame rate - no, you don't have to work at 24P...as mentioned before, the camera actually records at 29.97 fps, but is able to be played back and edited at 23.976 fps (or 24P)...it's a complicated explanation on how it all works...
If you're going to finish to a regular DVD, then working at 29.97 is the way to go. As for the interpret footage command, highlight the clips in your bin, then right click on them - in the menu, you'll see interpret footage - click on that and a new window should open...you should see a box with a check next to it that says remove 24P pulldown - click it (removing the check) and the footage frame rate should change to 29.97 - then click OK...create a 29.97 sequence (DV NTSC Widescreen 48Khz), and edit away.

MSI Z77A-G65 - Need help with Overclocking

Hi all, I will list hardware first:
Motherboard: MSI Z77A-G65
Bios: Version 10.8
Graphics: 2x GIGABYTE GV-N670OC-2GD GeForce GTX 670 Windforce OC 2048MB in SLI
Power Supply: Seasonic SS-1250XM X-Series
CPU: Intel Core i7-3770K Quad-Core Processor 3.5 GHz 8 MB Cache LGA 1155
Memory: Corsair Vengeance 32GB (4x8GB) DDR3 1600 MHz (PC3 12800) Desktop Memory
Optical: 2x Lite-On Super AllWrite 24X SATA DVD+/-RW Dual Layer Drive
HDD: 3x Seagate Barracuda 2 TB HDD SATA 6 Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive
HDD: 1x Seagate Desktop HDD 4 TB SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive
Sound: Creative Sound Blaster ZX SBX PCIE Gaming Sound Card with Audio Control Module
SSD: 1x Plextor 512 GB SATA III Solid State Drive PX-512M5P
Cooling: Cooler Master Seidon 240M Liquid CPU Water Cooling System with Copper Heatsink and 240mm Radiator - 2 Fans
Operating System: Windows 8 Pro x64
Case: Cooler Master Cosmos II - Ultra Full Tower Computer Case with Metal Body and Hinged Side Panels
Alright, now you see what I have. That is just about everything excluding things like my wireless mouse and keyboard.
So, I have been perfecting this build for awhile now, but I'm not the most experienced at overclocking. I've used about 5-6 motherboards during about a year trying to get my 3770k to overclock. Yes, I wasted quite a bit of money. I recently RMA'd my CPU because I thought it was defective since I failed to overclock. Now, I have a brand new one. Then, I switched my 2133 G.Skill Sniper memory for more basic Corsair memory. I thought possibly it could have been my memory that was causing issues since it was about the only non-new part left up until now. Now, this build is has all completely new parts. I don't think anything is defective. Lastly, my OS has recently been installed. About 2 days ago. All drivers /windows updates are up to date.
Alright, I gave my opinion on my hardware / OS and explained that. So, now I will try to explain my overclocking attempts. I first tried to overclock using the basic OC Genie II settings untouched. However, that didn't work out for me. I did get BSODs eventually or programs that crashed. Sometimes, games have crashed. I'm not doing anything overly important on this computer. I have a lot of other non-overclocked computers for various things like work ect. So, I am free to be able to play with this computer and try to get it OC'd properly. So, don't worry about that. I've read about 10-20 guides on overclocking and such, and for some reason I can't get things to be stable to the point that programs don't crash or fail. It seems with the Z77A-G65, there's no offset voltage tweaking option. If there is, I can't find it. I've read a lot that if you disable all power saving and use a fixed voltage that it can be more stable than using an offset voltage. Higher temps and more power usage I know.
So far, I've tried both, and neither have really worked for me. If I put vdroop offset control to 100% my temperatures increase but it can handle it. So, I tried setting the CPU to be fixed at 1.3 while at 4.5ghz. That was still not stable. Prime was ok, but some games and programs crashed. So, it wasn't stable for real world usage. Most of the time actually prime will be ok unless I try to put it at 4.8ghz with mostly default settings. So, after I tried 4.5ghz and 1.3 fixed voltage with no power saving options on, I tried bringing the voltage up to 1.350 which increased the temperature under load to about 85C. This wasn't stable either, so I went up a bit higher, well alot in overclocking standards. I went up to 1.4 just to see the temperatures and it got up to about 85C a occasionally higher. This was not stable either. So I tried turning off all C states and other power saving options and setting the vdroop offset control to 100% while also setting the voltage to auto. This wasn't stable. Usually when I set the voltage to auto , it will crash at anything above 4.7ghz and not boot. Anything below that it will boot, and even be capable of running prime or intel burn test, but it won't remain completely stable with all applications. Even basic programs like Firefox crashes sometimes. I do have one program that is pretty nice for benchmarking in the real world, and that's Amazon's cloud drive uploader. I ran it for a bit and it will eventually crash if I'm overclocking. I have tried some games like Diablo 3, Borderlands 2, ect and they have crashed as well on a clean windows 8 install.
I've also tried some of the turbo templates that only OC during turbo boost but idle at normal speeds/ 1.6ghz. This wasn't stable either. So, I'm at a loss, I've tried Turbo overclocking, Fixed voltage overclocking, offset voltage overclocking, power saving options on , and power saving options off. No luck. Any help would be appreciated. Thanks.

First off, Ivy CPU's under conventional cooling solutions are terrible OC'ers. 85C is too hot for everyday use under stress. Mid 70C's or better still, less is recommended. All significant power saving features are lost once the CPU V. is taken out of Auto. VDroop at 100% supplies the most voltage and decreases it as the percentage is lowered. Turbo OC is often the best over a CPU Ratio OC. From what I can read, the CPU you have is average and should run stable at 44X or maybe 45X on Auto CPU V., all power saving features intact.
32GB of RAM is great for rendering, graphics and audio/video creation, but if the goal is a gaming machine, 8GB to 16GB is more than enough.
Added: Recommended settings; SA 0.965-0.970v's, PLL 1.82-1.84v's, I/O 1.07v's.

Need help with G4 to Mac Pro Migration!

After buying my 2.66 GHz Mac pro, i followed the instructions as to how to start up the G4 in "Target Disk Mode" for migration. Was completely useless.
Whether clicking the button in the "Startup Disk" prefs, or holding down 'T' and restarting, i got the same results: My G4 system would restart but before anything appeared on the screen, it shut down and stayed.
I've been searching all over these forums and doing a lot of reading and experimentation. It sound like a lot of people aren't having good luck with the migration wizard anyway.
II did finally manage to get the Mac Pro to log onto the G4 with a cross-over cable. But i need to transfer a tremendous amount of data both from my primary account on the G4 and 3 non-boot internal drives.
Having to go through a public folder isn't going to cut it. .MAC isn't either.
Is there some way i can link up the two systems such that i can retrieve what i want from the G4's drives (without spending additional money).

Efforts to make "Target Disk" mode function didn't seem to go anywhere.
I did at last figure out how to get access to disks all disks on my G4 from my Mac Pro, however.
For those who may need to know it required these simple steps:
{1} I connected both systems to a hub (or DSL router in my case) via ethernet. Connecting the two machines with an ethernet crossover cable also worked, but of course my access to the internet was then unavailable.
{2} Opened TCP/IP in Network prefs on both machines and set them up identically according to my ISP's instructions, as always, but with differing IP addresses.
{3} Under the Services tab in Sharing preferences i checked the box to enable "Personal File Sharing"
{4} I then chose Connect to server... {command-K} in the Finder on the Mac Pro and entered the LAN IP address of the G4.
{5} At the login prompt i entered my G4 main account login & password information.
{6} When the window with my G4 system's name came up and asked which disk(s) to mount, i selected all of them and clicked { Ok }.
Presto. The G4 main drive, my 2 disk raid, my 4th disk, and my home directory all popped up on the Mac Pro Desktop.

Need help with WD My Book Pro Edition II

I started with it connected via FW800 to my PowerMac G5. Later, decided to connect to my Airport Extreme to share with my wife's PC and my MacBook Pro. I tried to connect back to my G5 via anything and it will not mount. When I run disk utility, it says it was not properly unmounted. I understand the issue and why, but I have went back to the Extreme, reconnected to all my computers and unmounted properly just to be safe, then disconnected from extreme and it still will not mount to my mac. Any suggestions?

DaddyPaycheck and Miriam, thank you for your suggestions. I've been contacted by one of the senior VPs of PR at Western Digital, and he has promised to put me in touch with more advanced tech support in the US, to see if my problem can't be resolved. It seems my blog posts and videos got some well-deserved attention. We'll see where this new development leads. I'll keep this post marked as unresolved until I have a definitive solution for my issues, and will update it as needed.
I've had great success with the OWC NewerTech Stack enclosures, the ones that have a built-in Firewire and USB hub. I've had two of them for over 2 years now, and they work great. I've replaced the drives inside them as bigger drives became less expensive, and they've held up quite nicely. I also have a Porsche-designed LaCie that has been working non-stop for about two years as well, and now I have three 500 GB LaCie drives that I recently bought. They work great as well. I also really like my Drobo, which I bought to store my photo library. The only drive I'm having problems with is the My Book Pro Edition II, which is why I keep trying to get its problems resolved.

Need help with refurb. Macbook Pro purchase.

I'm looking at buying a refurbished Macbook Pro. What's the diff between a 2.2g quadcore and a 2.0g quadcore? Or what's faster, a quad 2.0 with 8 gigs ram or a quad 2.2 with 4 gigs? I will be using it for writing and recording music.
Thanks in advance,
The Guy

You're looking at the 15", correct. Obviously, the 2.2 is faster, but a big difference between the two is the GPU, with the 2.2 having 1GB of video memory...big difference you will notice. Don't worry about RAM, as you can upgrade that yourself cheaper than Apple charges for RAM.

Need help with Acrobat 6.0 pro; size of print is stuck @ 4.6"- can't change file print size

- can't change file print size at all. printing one size dont know how to change it (looking in print preview while in acrobat 6.0 pro..
MAC OS 10.5.8

...."page set up" from the apple menu- double duhhhh !

Need help with my new Macbook Pro please!

I recently bought the new Macbook retina and I managed to copy all my email from my old mac to the new one however now whenever I receive an email, it automatically gets sent to junk, and I have to mark it as not junk each time.
It never used to do this on my old mac it was just now recently when I got this new one and I've not been able to solve this problem yet.
Also there is an annoying thing I notcied that every box when quitting any application appears to select one option of two ( I didn't know how to put it in words but hope the attachments explain what I mean )
How can I overcome the email problem as well as the other unknown problem?
Regards

You probably qualify for the up-to-date program and you can get a free copy.
See http://apple.com/osx/uptodate/

Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

Hello, I need help with my macbook pro.
It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
I am running Lion 10.7.3.
Regards,
Nicolas.
(I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

Need help with my iTunes on iPhone 5 and Macbook Pro

Need help with my iPhone 5 and my Macbook Pro. I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5. Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac. Can anyone help me with that ??....

You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

Need help with my iPhone 5 and my Macbook Pro.

Need help with my iPhone 5 and my Macbook Pro. I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5. Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac. Can anyone help me with that ??....
iPhone 5, iOS 6.0.1

You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

Need help with Installing Canon LBP 2900B on Macbook Pro OSX 10.6.8

I know this is going to sound silly, but really need help with this, URGENTLY!!!
Bought a Canon LBP2900B printer more than a year ago, and was using it on my MacBook Pro with OSX Snow Leopard (10.6.8) very well. My hard disk recently crashed and now I cannot reinstall the printer, nor can I find the driver for it anywhere for the Mac.
Have searched all the forums and followed all discussion threads on the Apple Communities as well, but none of the solutions seem to work. Even went back to @Dexter's solution with trying to download the file from the link http://boolet.free.fr/CAPT.zip (this is what I had done when I bought the printer, and it worked perfectly) but the link doesn't exist anymore.
Extremely grateful if anyone can put up a solution to this, or alternatively, IF ANYONE HAS THE OLD CAPT.ZIP FILE AND CAN UPLOAD IT.
Thanks in advance. Look forward to your solutions.
Cheers

Depends on how the partitons are arranged. If they're exactly as quoted, then yes.
Open Disk Utility and select the partition tab.
In the diagram, the top partition needs to be the one you're booted from, and partition 2 the middle one.
Select Partiton 2 so that it's highlighted, and click the '-' button below the diagram.
Drag the bottom right corner of partition 1 down to meet partition 3.

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

Need help with overclocking my x58 pro-e

Similar Messages

Maybe you are looking for