NEED HELP WITH OXYGEN MIDI PORT ISSUE

O.K I AM SO FRUSTRATED CAN SOMEONE PLEASE PLEASE HELP ME! HERE GOES:
I'm running Logic 9 on new Macbook Pro. I use the oxygen v2 25 key midi keyboard controller with no problem. The Mrs. buys me a new OXYGEN (BLUE)61 Key MIDI KEYBOARD for Chrsitmas. When I use the oxygen61 it plays but when I press play on Logic 9 and run my track the message comes up
Device "Oxygen" is assigned to MIDI Port Oxygen 61 which is not present.
Please ensure taht all MIDI settings are connected and switched on. if this is the case please check the mdi port setting of device "OXYGEN". If this is correct, click "reset All Midi Drivers" in Preferences > MIDI> General.
I reset and still the same problem.
Please HELP!!!!!!!!!!
Thanks guys all the best,
Drew

Hey,
Thanks for the help but I had already done that.problem is I can play the keys when I pressplay on the track it's stops the message comes up and the board loses power.
But thanksfor the reponsegladly appreciated.
All the ebst

Similar Messages

Need help with Low disk space issue and blue screen

Hi Everyone, just seen a message stating a low disk space on my Mac pro bought last November and tried plugging in an external hard drive to remove some pictures to free up some space but it seems that the computer did not have enough space left to start up and run the hard drive. I then tried to restart and ended up with a blue screen and have no knowledge now how to fix this problem. I phoned support but they say I have no technical support left but do have warranty and I would need to either try with the community here or take the unit to an apple store for an appointment. The store is an 1 and 1/2 from me and I really want o see if there is another fix that could allow me to start again then remove some files and then add external drive to remove more. I was blown away at the low amount of storage.....looked for the icloud option last night to upload there as i was told about this by a UK client of mine and now see it is not up and running. Any advice or help by the communtiy would be greatly appreciated as this is my business and travelling laptop. Cheers, Dean <")))><

Great to hear Dean, thanks!
Further notes: OSX needs about 15% or 10GB Free space minimum, but will run mucch faster/safer with 30-40% or 50GB of Free Space... Free Space is no longer ours to use.
Another tool to help clear up assorted things is Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

Need help with Java MIDI and VST info

I am currently a college student for programming and I know programming very well, but for this current task, I am completely stuck. This is not a school project or work, just a personal project I'm working on at the moment to learn more about Java.
What I am trying to create is a VST (Virtual Studio Synthesizer) using Java for use in music programs such as FL Studio, Sonar, Ableton, and so on. I did alot of Googling and found the following program:
[http://jvaptools.sourceforge.net/index.html]
I got it working, but it's not quite what I am looking for (it's more like an on-site editor that you enter code into and then run it). I want to create a VST from scratch and learn what each thing means in the program. I've done some research on MIDI input and output and found the following in the Java documentation:
[http://java.sun.com/javase/6/docs/api/javax/sound/midi/MidiDevice.html]
I figured I'm on track of what I'm looking for, but the problem is that the Java documentation simply sucks. It has no examples of code, how the functions work, and how I'm suppose to use them.
First off, I want to start with the extreme bare basics. Is it even possible to do a VST in JUST Java? I've seen and used examples of obtaining data from a MIDI file and playing it, but that's not what I'm trying to do. Second, how would I take MIDI data from a music program running the VST and enter the data into a text box? Once I'm able to do that, I should be able to work with the data to produce audio output.
My program I am attempting to make is a guitar synthesizer that I can run in music programs as a VST. If anyone around here knows anything about MIDI and VST plugins, please, post some example code and help point me in the right direction to creating something. I'm not looking to use other people's programs or code, I want to make something myself from scratch but I don't know where to start!

Programming guide
[http://java.sun.com/j2se/1.5.0/docs/guide/sound/programmer_guide/contents.html]
Examples...
[http://www.jsresources.org/examples/]

I need help with Photoshop CS4 reactivation issue

It may be more than just an activation issue. CS4 has always worked beautifully on my iMac until yesterday when it failed to launch. I tried everything and finally deactivated it, reinstalled it and it still won't launch. I do not have Photoshop CS4 on any other computer. I've been all over the web and ran into many people with the same problem. Adobe won't help resolve CS4 issues so I'm stuck. HELP!!

Does launching it give you an error code?
Try the procedures in this help document.
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
Gene

Need help with Audio Midi Setup(please Read)

Hello,
I cant find the audio and midi tabs on my toolbar. All I can see is audiomidisetup edit view history bookmarks window help. I need to aggregate a device any ideas or help?

I think what you are looking for is something like this http://66.34.186.88/LiveCyclesamples/ExpandToFit/TextFieldExpandToFit.pdf
I am new to this concept, so I cant help out any more. Hope this helps.

I need help with an email inbox issue

so basically I forgot my answers to my security questions, so I pressed "reset anwers....." And they said "email sent" but I waited to hours, days and didn't get that email! But I got an email from Apple about other stuff like opening iCloud and stuff, but I didnt get that email. And I did it like 100 times and turned off my phone, everything! And for paid apps it needs the answers to those questions and so does itunes. plz anyone help make my day?❤️❤️

If the email isn't in a spam filter, you need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(115845)

Need help with an unusual keyboard issue

Weird issue. On my 13 in. MacBook (not Pro), sometimes my L, O, and 9 keys will stop working, until I press one of them in hard enough to register; that fixes the problem. But it intermittently returns.
Anyone have any experience with this? Advice?

Take it to Apple or an AASP.

Need help with Snow Leopard compatibility issue

We have a new iMac in (with Snow Leopard) and have loaded all our programs. Due to budgets, we have not made the jump to CS4 and are still on CS3 (waiting for 5). We work in an InDesign/InCopy workflow.
In launching InDesign on the MAc with Snow Leopard, we have noticed that the assignment folders are nonexistant and within the program you can't even open an assignment window. When you reopen on a system without Snow Leopard, the individual assignments are there, but the program states it can't find the main assignment, so it's cancelling out the assignments if opened on the Snow Leopard unit.
Does anyone have any info on compatibility issues with Indesign CS3 and Snow Leopard? My tech guy found nothing on this before we ordered the new system.

First things first. CS5 was announced today and preorders are being accepted.
I believe if you upgrade to CS4 you'll get a free copy of CS5. This is important because if you're upgrading a suite, tiered pricing makes CS3 to CS4 $200 less than waiting til CS5 comes out.
That out of the way, is everyone fully patched to CS3 5.0.4? Is Snow Leopard fully updated to 10.6.3? Do you have full read/write permission on the server?
Bob

Need help on Oracle DB Port Issue

Hi,
I have installed EBS R12 for windows on my desktop. The VIS DB is using port 1521 and run OK. Now, I have installed another Oracle DB 10g rel 2 with SID=orcl (will be used for another application) but this one is also using port 1521. When I was installing this DB it did not give me the opportunity to select the port. How can I change the port of this DB 10g? I do not want to touch the port used in EBS R12.
Thanks in advanced,
Amorsolo

How to change the listener port?
Regards
Asif Kabir

I need help with Yahoo web mail issues - icons are missing.

I need the link to install eWebMail Color and Graphics extension since all the icon in yahoo email for forward,delete, close...etc are disappeared.
Can anybody help me in that.
THANKS FOR ALL
''Title edited by a moderator''

See:
* http://kb.mozillazine.org/Website_colors_are_wrong
* http://kb.mozillazine.org/Websites_look_wrong
If images are missing then check that you aren't blocking images from some domains.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
* Check that images are enabled: Tools > Options > Content: [X] Load images automatically
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions
* Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)
There are also extensions (Tools > Add-ons > Extensions) that can block images.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Need help with ios 8 icloud issue

I just updated to iOS 8 and want to utilize family sharing with my kids. Previously I had to logon to their devices with my own apple ID in order to share content. I want to give them their own ID's and utilize the "authorize to buy" option, but when I created and signed into my daughter's phone with her new apple ID, iCloud keeps my ID and password associated with the device and allows her to approve her own purchases. How do I disassociate her icloud with my account and input hers on her phone without a full factory reset? I have already signed out of the itunes and app store on the phone and signed back in as her. I have done the same for imessage and facetime, yet under icloud it still shows my account and will not allow me to make changes there.

Where did you sign her new Apple ID on? Did you delete your iCloud account? Settings>iCloud, scroll down to the bottom of the screen and tap on Sign Out. Type in your password when asked, and follow the prompts to delete the account. Then sign on with her Apple/iCloud ID.
Cheers,
GB

Need help with BW Process chain issue

Hi Gurus,
I had made a copy of the existing process chain so that I can work on the changes. Its a metachain and I tried to copy a sub chain.
But at a later point of time, I have realized that the process chain had got into a nested loop in the meta chain, for the sub chain, I had copied. How do I rectify it?
Kindly suggest

hi,
use the bottom up approach.
Looking at the attached file it has many PCs.
Just note down all list of all PC and then do the copy of individual PCs, later you can copy the complete meta chain.
If you want give one more chance and try to copy meta chain again.
Thank-You.
Regards,
VB

Need help with taglib and javascript issue

I have created two WebSphere portlets (using WebSphere Application Studio), which exchange information by using click-to-action. I have added the click-to-action functionality programatically.
On my source portlet jsp page I took the java code which generates the click-to-action javascript and added it to a taglib I created. The problem is that now the click-to-action functionality doesn't work.
When I look at the source code in the browser the javascript and the onClick code is there as it should be, but when I click on the hyperlink, the click-to-action menu is not displayed.
If I take the java code out of the taglib and put it back into the jsp page it works no probs and on inspection of the generated code it is exactly the same as the code generated by the taglib version.
I have noticed that when I click the hyperlink to fire the onClick event I get an error message in the browser but when I go to the line number given in the error message, there is no code on that line.
Any ideas why it doesn't work when put in a taglib?
Thanks in advance,
A.

There can be a million reasons
1) What is the exact error line?
2) Try debugging in Mozilla instead of IE. Mozilla's javascript debugger is much better. In IE you may have to look more at the error message then the line it gives you to id where the error occurs.

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

NEED HELP WITH OXYGEN MIDI PORT ISSUE

Similar Messages

Maybe you are looking for