Need help with Pixi Plus setup on Telstra Australia

If any one can help i would be very grateful.
I'm in Australia and wanted to try out a WebOS phone as a replacement for my Treo 680.
I did the research and found that AT&T GSM phones will work here in Australia.
I found a new unactivated Pixi Plus on eBay, as it was the same WebOS as Pre thought i would give it a try and bought it.
So my new Pixi Plus arrived three weeks ago, put my sim in and found it was locked to AT&T. I rang AT&T and was told it will be locked till end of December because of there system. The eBay seller said it was locked and may be able to be unlocked.
I found a way around this problem as i didn't want to wait that long.
I ordered a Rebelsim Card that arrived a few days ago, put it in and seems to work. Now have Telstra Mobile in the top corner.
Now my problem really starts.
I can't get onto the web to activate and set up my '' cloud ''
My phone is asking for APN:
I have tried:
telstra.iph
telstra.internet
Nothing works.
I can't get out of this screen without a APN:
This APN: thing i didn't find out untill i got the phone. Can't find much info at all on the subject.
Why is Palm making it so difficult, don't they want to sell phones.
Had no problems with my 650 and 680's bought form overseas.
Can anyone point me in the right direction please.
Thanks
Peter
Post relates to: Pre Plus p100una (AT&T)

Called Sonos, they got me all setup.

Similar Messages

Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.

Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

Need Help With ACS LDAP setup to Query AD

I have 2 Win 2003 ADs, one of them is configured and working under Windows Database (using remote agent) configuration. I am trying to setup the second AD with Generic LDAP setup. I want to know what exactly I should use in the fields UserObjectType and Class, and GroupObjectType and Class for Windows 2003 AD. All Cisco documents give example of Netscape LDAP syntax. I was told by our server admin. what to put under Admin DN, CN=myid,OU=mygroup,OU=myorg,DC=mydomain,DC=com
I have both user & group directory subtree fields filled with DC=mydomain,DC=com.
I am using the ip address for Primary LDAP server, and port is 389, LDAP version 3 is checked.
Is any of these DC, OU, etc. case sensitive?
With all entries that I have tried, when I go to map a group, I am getting error "LDAP server NOT reachable. Please check the configuration". My ACS can ping the domain controller's IP address fine.
Please help. Thank you in advance,
Murali

Murali,
These references may help...
http://download.microsoft.com/download/3/d/3/3d32b0cd-581c-4574-8a27-67e89c206a54/uldap.doc
http://www.microsoft.com/technet/archive/winntas/plan/dda/ddach02.mspx?mfr=true
http://technet.microsoft.com/en-us/library/aa996205.aspx
Regards,
Richard

I need help with proper DNS setup for 10.5.8 Server

I'm administering a 10.5.8 server that I sold and setup about a year ago. I'm experiencing issues with getting iCal server to be happy. All of the clients are running 10.5.8, but I'm running 10.6.1. I've heard from others that connecting iCal in 10.6 to a 10.5 iCal Server should be no problem.
I'm beginning to think that I have DNS issues. Probably because I'm not and never have been 100% certain how to set it up completely correctly. I used to be able to get Kerberos tickets, but now I can't. With the new "Ticket Viewer" in 10.6, it asks for two bits of information. First is "Identity" where I'm guessing I should put [email protected] and then password. When I do this I get an alert dialog that says "Kerberos Error -- cannot resolve network address for KDC in realm example.com"
The server is a Mac Pro tower with two Ethernet ports. En2 is connected directly to the Internet and has a static IP with a domain name assigned to it. We'll call it "example.com" for the purposes of the discussion. The En1 is connected to the network switch and has a static LAN IP of 192.168.1.250. All clients inside and outside are able to reach the server via domain name for WWW & AFP, no problem.
nslookup on the static IP address returns "example.com" and nslookup on "example.com" returns the correct static IP address. Open Directory is running and happy including Kerberos. The LDAP search base is "dc=example,dc=com". The LDAP search base is a concept I haven't quite grasped, so I'm just going to assume it's correct.
The domain name is hosted outside by a service provider that forwards all "example.com" requests to the server with the exception of mail.
In DNS, I have three "sections" that look like this:
Name Type Value
1.168.192.in-addr.arpa. Reverse Zone -
192.168.1.250 Reverse Mapping example.com.
000.000.00.in-addr.arpa. Reverse Zone -
000.000.000.000 Reverse Mapping example.com.
com. Primary Zone -
mail.example.com. Alias mail.our-email-isp.com.
example.com. Machine Multiple values
www.example.com. Machine Multiple values
NOTE: the zeros aren't actually zeros, they are the static IP assigned to the server/domain
When I select the top element "1.168.192.in-addr.arpa." down below "Allows zone transfer" is NOT checked. Nameservers shows the zone as "1.168.192.in-addr.arpa." and the Nameserver Hostname as "ns.example.com."
When I select the next line down "192.168.1.250", Resolve 192.168.1.250 to: example.com.
When I select the "000.000.00.in-addr.arpa." element, it has the same settings -- nameservers "000.000.00.in-addr.arpa." and "ns.example.com."
When I select the next line down (our static IP), Resolve 000.000.000.000 to: example.com.
When I select "com." the admin email is populated with a valid email address, Allows zone transfer is NOT checked. In nameservers, Zone is "com." and Nameserver Hostname is "example.com." The mail exchangers are mail2.our-email-isp.com. priority 10 and mail.our-email-isp.com. and priority 20.
When I select the machine "example.com." it shows both the real-world static IP and the 192.168.1.250, same with "www.example.com.".
Am I doing something wrong with this setup? Should "com." be the primary zone or should that be "example.com." ???
I've been thinking about getting rid of the DNS entry for the 192.168.1.250 address altogether, but will the clients in the office suffer performance issues??? I do not think that the client workstations are configured to get DNS from the server anyway. Should the "www.example.com." record be a Machine record or should it be an alias record?
Any help you have to offer is greatly appreciated! Thanks!
In the meantime, I'm going to look around and see if I can understand "Allows zone transfer" and LDAP Search base a bit better.

Okay, I found a lovely article at the following address which I think helps me to clarify what I'm doing wrong. Despite that, I'd still like to have any feedback you have to offer.
http://www.makemacwork.com/configure-internal-dns-1.htm
Also, when editing DNS entries, Server Admin likes to set the nameserver to "ns." -- whatever your domain is. Should I be overriding that and if so, replace it with what?

Need help with QoS config/setup for my home network.

I have a home network that spans two buildings, has and FTP download server, VoIP phones,and several computers among other IP devices. I run a home based business where my clients get access to the company FTP download server (NOT illegal file sharing). the problem is that when they are downloading files my VoIP takes a big hit and gets choppy when speaking to my customers. Below is the layout of the network.
Our Internet access is Verizon 4G, there are no other options available at this time or we would switch. The Verizon 4G MiFi connects to a TP-Link wifi router that then connects to port fa0/5 on the Office 3550PoE switch. There is a trunk between the Office switch to the House 3550PoE switch. The House switch then connects to the Shop 3524XL switch also using a trunk. Please note that EVERYTHING works fine other than the VoIP issue, VoIP makes and receives calls without connections issues.
Auto QoS has been run on the Office switch ports fa0/1 and fa0/2 as well as on the House switch ports fa0/3 and fa0/5. There is NO auto QoS on the 3524XL
What is the best way to give VoIP traffic top priority over FTP and web browsing when going out port fa0/5 on the Office Switch? Over the internal network we are not having any call quality issues between the IP phones, just calls to our SIP provider. Yes, I understand that once calls exit the Office switch to the TP-Link wifi router there will not be any QoS. But, if I can give priority to the packets at the layer 3 Office switch (or wherever you suggest) then at least I will not have to kill a users FTP download while I am on the phone.
Thank You

I can make ANY changes necessary, just need to know what to do.
First, did you notice the output of the command sh mls qos fa0/5 above? Is it working correctly?
Next, Yes I do have version W17 and can install if if needed. The lost of possible commands I listed above was from the conf t - config interface fa0/x level. There is class and policy mapping commands the the config global level along with all these other commands:
aaa                         Authentication, Authorization and Accounting.
access-list                 Add an access list entry
alias                       Create command alias
arp                         Set a static ARP entry
banner                      Define a login banner
boot                        Boot Commands
buffers                     Adjust system buffer pool parameters
cdp                         Global CDP configuration subcommands
cgmp                        Global CGMP configuration commands
class-map                   Configure QoS Class Map
clock                       Configure time-of-day clock
cluster                     Cluster configuration commands
default                     Set a command to its defaults
default-value               Default character-bits values
downward-compatible-config Generate a configuration compatible with older software
enable                      Modify enable password parameters
end                         Exit from configure mode
errdisable                  Error disable
exception                   Exception handling
exit                        Exit from configure mode
file                        Adjust file system parameters
help                        Description of the interactive help system
hostname                    Set system's network name
interface                   Select an interface to configure
ip                          Global IP configuration subcommands
line                        Configure a terminal line
logging                     Modify message logging facilities
mac-address-table           Configure the MAC address table
map-class                   Configure static map class
map-list                    Configure static map list
mvr                         Enable/Disable MVR on the switch
no                          Negate a command or set its defaults
ntp                         Configure NTP
policy-map                  Configure QoS Policy Map
power                       power configuration
priority-list               Build a priority list
privilege                   Command privilege parameters
queue-list                  Build a custom queue list
rmon                        Remote Monitoring
scheduler                   Scheduler parameters
service                     Modify use of network based services
shutdown                    Shutdown system elements
snmp-server                 Modify SNMP parameters
spanning-tree               Spanning Tree Subsystem
stackmaker                  Specify stack name and add its member
tacacs-server               Modify TACACS query parameters
tftp-server                 Provide TFTP service for netload requests
time-range                  Define time range entries
udld                        Configure global UDLD setting
username                    Establish User Name Authentication
vmps                        VMPS settings
vtp                         Configure global VTP state

Need help with SQL*PLUS!

I have just downloaded Oracle SQL*PLUS 9.2.0.1.0, but I am not able to use it because I do not know the "password", "user name" and "host string". Can anybody please help me with this.
Thanks in advance,
Flo

The username & password are your database username & password. If you don't know these, you'll have to contact your DBA to find out.
The host string is the alias you used when you configured TNS on your machine. Most commonly, this is done by editing the tnsnames.ora file or by using Net8 Easy Config.
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com

Newbie need help with Web BEx setup!

Out of curiosity, I decided to install Netweaver so I can have a play with it. I am a complete newbie to Netweaver therefore I apologise if this is out of context...
Here's my question:
How do one go about getting Web BEx to work?
Whenever I activate the link in the portal, I get an error about unknown "SWITCH_AXES" command and 0ANALYSIS type 4 error. I search the forum and the few passing mentions of the problem points to OSS notes that is only accessible through service marketplace (which I don't have an ID). I have check the object types in BI content and seems that 0ANALYSIS is already activated. There must be something I am missing. Tried blindly and randomly installed other BI content (mostly Web templates and objects) but to no avail (and encounted a few short dumps).
Any help is greatly appreciated!
So far, here're what I did:
1) Install Netweaver 2004S ABAP and Java on the same machine. Instance 00, 01 and 02 respectively.
2) Try to run BI-Java template installer, but met with error part way. So some of the steps are done manually.
3) Set up SLD (both instance are in the landscape), and 'partially' set up SSO. Partially as while JAVA to ABAP seems to work, ABAP to JAVA is not working. Anoying but livable.
4) Installed TREX (instance 03) and are seen by ABAP and JAVA.
5) ABAP is seen in the portal and I can create transactional iviews and put them in the Portal (with working SSO).
6) Did reverse-proxying with Apache, but I don't think it matters as it seems to be a backend module issue.
7) Business planning/wizard is working (in ABAP and Portal) as is Broadcast. As you can see, Web BEx is the only thing that is not working

The default link for Web Analyser in EP 7 seems to point to the new template. When opening the analysis template in the new BEx windows tool, the same error is being reported. Using 3.5.x WAD, I can't locate the template.
More on this issue Although for that case, the meta data is not installed. Is there a way to trace missing component and reinstall the needed BI content in RSA1?
BTW, these are on JAVA SP9 and ABAP SP11.

Need Help with Multiple Airport Setup

I have the following hardware:
2- Airport Extreme (Simultaneous Dual-Band II)
1- Airport Extreme 802.11n (Fast Ethernet)
2- Airport Express 802.11n
Microcom EZ-BR2 802.11b/g Bridge Kit (the routers see this as just an ethernet cable connecting the two points)
Extras (old Airport Extreme Dome, Old Airport Express, D-Link DIR625)
I am host at a camp and retreat facility in a national forest. We have a satellite connection in our ball field on one end of the campus. The satellite line goes into a recreation building with the modem and Airport Extreme 802.11n (Fast Ethernet) router. The Microcom EZ-BR2 is plugged in to this on one end and connects to one of the Airport Extreme (Simultaneous Dual-Band II)'s in our main building office 800 feet away. The router in the office is set up as the main router for the wireless network, our Ooma phone & network printer are plugged in here. There is one Airport Express in this building giving internet access to a Power Mac G4 & old iMac. Up to this point everything works fine. My house is across the road from the office and has a pretty strong signal from the office router. I tried hooking up the other Airport Extreme (Simultaneous Dual-Band II) at home. If I set it up to extend the network the wireless works, but the Ethernet ports do not. If I set it up in bridge mode, the ethernet ports work but it doesn't extend the network, so I put the other Airport Express in bridge mode first to get internet in to the Extreme then made a new network for the house, If I keep it all the same network my Apple TV doesn't really work, with a second network our iphones and misc. devices keep getting kicked off the network "IP not valid", so I have to keep powering down to get everything working again. How should I set this up?

My house is across the road from the office and has a pretty strong signal from the office router. I tried hooking up the other Airport Extreme (Simultaneous Dual-Band II) at home. If I set it up to extend the network the wireless works, but the Ethernet ports do not.
To have the Ethernet port active, you would have to configure both the AEBSn in the office and the one you have in your house as an extended network ... with the office AEBSn configured for "Allow this network to be extended" and the house AEBSn configured for "Extend a wireless network."
The key here is that (most likely) you will not be able to extend the 5 GHz radio and possibly not the 2.4 GHz radio due to the range between the AirPorts. The higher frequency network typically has a usable range of 50-75 feet; the 2.4 GHz network, 100-150 feet. By "usable," I mean with sufficient bandwidth to be worth it.
You can test this by measuring the Signal & Noise values and calculating the resultant Signal-to-Noise Ratio (SNR). You will want the house AEBSn within a 25+dB range of the one in the office.
Let me know if you need further assistance on how to take these measurements.

Need help with dual monitor setup for KDE 3.5.5.

Here's my hardware:
NEC MultiSync LCD 1530V: 1024x768 (analog)
Samsung SyncMaster 941BW: 1440x900 (digital)
nVidia Dual head AGP video card.
The dual monitor works under dual-boot Windows, boot up and pure Linux console. I've googled around for help, changed my xorg.conf file accordingly to some sites, but it wasn't much help.
Here's my working xorg.conf:
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Device"
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Using this xorg.conf file, only my NEC LCD analog monitor could display KDE while the Samsung digital can't.
Any suggestions?

Thanks for your help guys, I'm halfway there.
The second monitor shows the KDE desktop, but it isn't exactly what I expected. Right now, both monitors display at 1024x768 (each) or 2048x768 (total). The larger monitor stretches and distorts the display of 1024x768 to its natural resolution at 1440x900 and it isn't what I wanted. Other than that, the dual desktop setup behaves what I expected to.
Here's a snippet of my xorg.conf that currently works:
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "Samsung SyncMaster"
HorizSync 31.5 - 60
VertRefresh 60.0 - 70.0
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
Option "TwinView" "true"
Option "TwinViewOrientation" "LeftOf"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
# Option "MetaModes" "1440x900, 1440x900; 1024x768, 1024x768"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 2"
Device "NVIDIA GeForce"
Monitor "Samsung SyncMaster"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1440x900"
EndSubSection
EndSection
Anyone have an idea?
EDIT: Oh snaps. I just did a pacman -Syu and it upgraded Arch Linux to 0.8 and the 2nd monitor stopped working.

Need help with sonos speaker setup, connecting to music through an NAS hdd on AirPort Extreme.i

i Cannot figure out how to connect the sonos speaker with the right path. It also wants a password for the disk and I don't recall setting up one. My speaker works fine through my pc or MacBook but I want to play music from a shared folder on an hdd that is connected to my AirPort Extreme. Any ideas or experience with this???

Called Sonos, they got me all setup.

Need help with Audio Midi Setup(please Read)

Hello,
I cant find the audio and midi tabs on my toolbar. All I can see is audiomidisetup edit view history bookmarks window help. I need to aggregate a device any ideas or help?

I think what you are looking for is something like this http://66.34.186.88/LiveCyclesamples/ExpandToFit/TextFieldExpandToFit.pdf
I am new to this concept, so I cant help out any more. Hope this helps.

Need help with complex NAT setup with DHCP forwarding

This is going to get a little crazy, so try to stick with me... Attached is a very crude network map to clarify as best I can...
I need my Cisco 831 to perform 1-to-1 NAT, but the Inside Global ('Black' LAN hosts as seen by the WAN) addresses must be assigned via DHCP from a DHCP server on the WAN. (This is the complex NAT part) The internal IP addresses would by assigned by the 831's DHCP.
In addition, the WAN's DHCP server must see the MAC address of the request as the one that belongs to the host on my LAN - Effectively, the WAN DHCP server should not be able to tell there is NAT going on. (This is the DHCP forward problem)
Any ideas on how to combine these tasks?
TIA,
-Chris Bowles, CCNA

Hi.
I don't think this is supported in alter table command. But you can code that inside an if statement which queries systables & syscolumns. Your code should be something like that:
if (select count(*) from sysobjects, syscolumns where sysobjects.id = syscolumns.id and sysobjects.name = 'some_table' and syscolumns.name = 'some_column') < 1
begin
alter table some_table add some_column numeric(12) not null
end
This is an example..
Andreas.

I need help with the boot setup in BIOS

I am trying to reinstall windows 7 back onto my sister's laptop, The BIOS Version is 3.5
I went to the boot order to put the cd/dvd rom in the first boot order and then the notebook hard dive second, selecting f 10 to save and exit. When the computer boot up to go through it process, it goes to a screnn saying that boot device cannot be found, please install a window operating system (3F0) Going back to the BIOS and setting the BIOS to default, selecting f 10, save and exit. Goes through the boot up getting the boot device cannot be found.....
Again I go through the BIOS to the boot order and moving the cd/dvd rom first and the notebook hard drive second and selecting the f 10 to save and exit. Anyway, I still get Boot Device Cannot be Found, Please Install a Windows Operating System (3F0).
Can someone please help me or is this a lost cause.

Hi,
Rather than setting the boot priority in the bios menu, try the following and see if there's any change.
Remove the installation dvd and shutdown the notebook.
Tap away at the esc key as you start the notebook to enter the Start-up Menu.
Insert the Windows DVD.
Select the Boot options menu ( f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Need help with Sata Pata setup PLEASE

I am running a MSI 6728 (865 chipset) Windows XP SP2
I want to run 2 SATA drive booting from 1 of them, not interested ib RAID right now.
Also I want to run 2 PATA on IDE1 and I PATA HD and DVD on IDE2.
Sure could use some help configuring this.
I can get all the drives to so up at boot, they show up ad unallocated in the disk managment area. They do not show up at all in "My Computer"
All of these drives are formated and contain data.
Any and all help will be appreciated.
James

Hmm... I'm trying to consolidate as much info as possible to put everything in a sticky thread for all members as a reference guide.
If you guys have any good solutions, you can PM me and I'll create a sticky thread for them.

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

Need help with Pixi Plus setup on Telstra Australia

Similar Messages

Maybe you are looking for