Need help with Pop Up message

I've created a pop up message for a client that notifies you
when you are leaving a site. You can press ok to get redirected to
another site or cancel out by pressing the X. But when you press
the X it redirects you to the site anyways. Is there a way to
cancel the action or redirection of the pop up message window. Or
do I need to create a seperate page for the pop up message.

If you haven't already, you would be well served searching
through the
archives for the answer to your question. The archives can be
found here:
http://groups.google.com/group/macromedia.dreamweaver
http://groups.google.com/group/macromedia.dreamweaver.appdev
In this case, I think you'll find an answer that says, "Don't
do this,
people know what they want to do".
You don't need to repost the topic, if somebody wants to help
you they will.
It's doubtful anybody will, though, because it's not a
popular behavior on
the net.
The only place that still does it that I surf is my bank, and
I can't think
of a worse security botch up. What if I just leave and
somebody comes in
behind meand clicks "cancel". Stupid.

Similar Messages

Need help with POP UP messages

I've created a pop up message that notifies you when you are
leaving a site. You can press ok to get redirected to another site
or cancel out by pressing the X. But when you press the X it
redirects you to the site anyways. Is there a way to cancel the
action or redirection of the pop up message window. Or do I need to
create a seperate page for the pop up message.

Don't do this at all. People know what they want to do.
James M. Shook
http://www.jshook.com

Need help with pop-up

Need help with this one. All of a sudden I keep getting a
pop-up saying "cannot locate file flash.ocx". What the heck is it
and how do I get rid of it. It is QUITE annoying. Any help would be
appreciated.

I am glad to hear that changing or disabling the screensaver
seems to fix this problem for most of us. Certainly, screensavers
are pretty antiquated and pointless on the newer computers out
there, but there are still some uses. Ever since I turned mine off
on one computer and switched to an older screensaver on my oldest
computer, I have not had this problem. And, unfortunately, I think
the problem is isolated to such a small fraction of screensavers
that adobe is just going to let those distributors take care of the
problem rather than spending the time to fix whatever glitch is
affecting them. The only downside is that once you figure out the
problem, which can take time and effort, you could lose a pretty
cool screensaver. All in all, that isn't much in the long run,
certainly not enough to get adobe involved.

Need Help with Kernel Panic Message

Can someone help with what this kernel panic log is telling me.
Wed May 19 15:15:29 2010
panic(cpu 3 caller 0x001A49CB): Unresolved kernel trap (CPU 3, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0xff42e900, CR3: 0x017b5000, CR4: 0x000006e0
EAX: 0xff42e900, EBX: 0x00130000, ECX: 0x00000001, EDX: 0x00001bbf
CR2: 0xff42e900, EBP: 0x379b37f8, ESI: 0x00000008, EDI: 0x06c805dc
EFL: 0x00010202, EIP: 0x001c4784, CS: 0x00000008, DS: 0x4a4c0010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x379b35f8 : 0x128d0d (0x3cc65c 0x379b361c 0x131f95 0x0)
0x379b3638 : 0x1a49cb (0x3d2a94 0x3 0xe 0x3d22b8)
0x379b3748 : 0x19b3a4 (0x379b3760 0x379b37a8 0x379b3778 0x4a4cef70)
0x379b37f8 : 0x1c5866 (0x61ed7b0 0x6086e0a 0x0 0x7069ad4)
0x379b3818 : 0x1d2532 (0x7069ad4 0x44345c 0x379b3848 0x6)
0x379b3878 : 0x1d279f (0x647ae1c 0x647ae1c 0x379b38b8 0x19a809)
0x379b38c8 : 0x1d413c (0x1 0x443340 0x252fae8 0x6476e60)
0x379b3928 : 0x2f4439 (0x0 0x34 0x379b39d8 0x7a4640c)
0x379b3a38 : 0x310417 (0x6303c04 0x6b32840 0x379b3de4 0x379b3af8)
0x379b3b48 : 0x310ace (0x379b3e6c 0x379b3f48 0x0 0x2)
0x379b3b68 : 0x1e7c06 (0x379b3b84 0x100 0x379b3cd8 0x6203004)
0x379b3bb8 : 0x1d2bbc (0x6b32840 0x379b3cd0 0x379b3de4 0x379b3e6c)
0x379b3c18 : 0x1df73c (0x6b32840 0x379b3cd0 0x379b3de4 0x379b3e6c)
0x379b3c68 : 0x1d774a (0x379b3cb8 0x379b3e2c 0x379b3e6c 0x379b3e9c)
0x379b3e48 : 0x1d7bb8 (0xa02 0x379b3e6c 0x6d7360c 0x1)
0x379b3f58 : 0x37b300 (0x6c805dc 0x6d735c8 0x6d7360c 0x0) Backtrace continues...
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386

Pretty hard to decipher logs for most of us.
Bad or incompatible RAM is the most common cause of KP's. It could just need to be reset…… to make sure there's a good connection.
Here's a great site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here's a great MacFixIt article.
 Good Luck! DALE

Need help with an error message: Can't repair volume.

Hi, folks.
While checking my HD with Disk Utility, I found a message error. It says that I have to repair the disk but the button "Repair Disk" is not available.
The message is copied below... if anyone can read it and help me, I'd appreciate.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Overlapped extent allocation (file 1022303 /Applications/Macromedia Dreamweaver MX 2004/Dreamweaver MX 2004/Contents/MacOS/Dreamweaver)
Overlapped extent allocation (file 1034457 /Users/Johnny/Library/Mail/[email protected]/INBOX.mbox/Messages/16 143.emlx)
Overlapped extent allocation (file 1034472 /Users/Johnny/Library/Caches/Mail/11/05/1521797044-3222719574.cache)
Overlapped extent allocation (file 1035396 /Users/Johnny/Library/Mail/[email protected]/Junk E-Mail.mbox/Messages/16148.emlx)
Overlapped extent allocation (file 1035401 /Users/Johnny/Library/Mail/[email protected]/Junk E-Mail.mbox/Messages/16149.emlx)
Overlapped extent allocation (file Overlapped extent allocation (file s/DisplayPictures/[email protected]/VnRhV1J0dXR3eG41aG04T3UxOXIrU lZWZ3AwPQ==.png)
Overlapped extent allocation (file 1042618 /Users/Johnny/Mercury/MSN/Resources/DisplayPictures/[email protected]/ R3FDbDlPNllTRGhhUmNXd3p2Sm55clQ0aUx3PQ==.png)
Overlapped extent allocation (file 1049904 /Users/Johnny/Library/Mail/[email protected]/Sent Messages.mbox/Messages/16257.emlx)
Overlapped extent allocation (file Overlapped extent allocation (file ail/02/12/4236346157-3219157957.cache)
Overlapped extent allocation (file 1050553 /Users/Johnny/Library/Mail/[email protected]/Drafts.mbox/Messages/1 6261.emlx)
Overlapped extent allocation (file 1050558 /Users/Johnny/Library/Mail/[email protected]/Drafts.mbox/Messages/1 6262.emlx)
Overlapped extent allocation (file 1050573 /Users/Johnny/Library/Mail/[email protected]/Drafts.mbox/Messages/1 6263.emlx)
1050573 /Users/Johnny/Library/Mail/[email protected]/Drafts.mbox/Messages/1 6263.emlx
@)",1)
1054976 /Users/Johnny/Mercury/MSN/Resources/CustomEmoticons/patinhodeborracha22@hotmail .com/NUxYOXd5ZkZiRjR0Wm5Ob3NZY0p6K09oWWFnPQ==.gif
Overlapped extent allocation (file 1055000 /Users/Johnny/Mercury/MSN/Resources/DisplayPictures/patinhodeborracha22@hotmail .com/TzNFcmEzTWxaMmV4L0NOelVEUllsaEJjd1BRPQ==.png)
Overlapped extent allocation (file 1057743 /Users/Johnny/Library/Mail/[email protected]@[email protected]/Sent Messages.mbox/Messages/16313.emlx)
1057743 /Users/Johnny/Library/Mail/[email protected]@[email protected]/Sent Messages.mbox/Messages/16313.emlx
t allocation (file %@)",1)
1057789 /Users/Johnny/Documents/Yazigi/Events/OFICIO_SDUMA.doc
Overlapped extent allocation (file 1057880 /Applications/Microsoft Office 2004/Clipart/Yázigi)
Overlapped extent allocation (file 1058044 /Users/Johnny/Library/Caches/Mail/04/11/2078440011-2247275449.cache)
Overlapped extent allocation (file 1058045 /Users/Johnny/Library/Caches/Mail/10/07/0272707744-3809369458.cache)
Overlapped extent allocation (file Overlapped extent allocation (file ny/Library/Caches/Mail/00/15/2244060425-1075118591.cache)
Overlapped extent allocation (file 1058051 /Users/Johnny/Library/Caches/Mail/09/11/0695285650-1820972980.cache)
Overlapped extent allocation (file 1058052 /Users/Johnny/Library/Caches/Mail/00/11/0589583874-0597952182.cache)
Overlapped extent allocation (file 1058053 /Users/Johnny/Library/Caches/Mail/05/12/0478257501-4274710467.cache)
Overlapped extent allocation (file Overlapped extent allocation (file Mail/00/01/0993945094-0587616530.cache)
Overlapped extent allocation (file 1058055 /Users/Johnny/Library/Caches/Mail/00/05/0791764484-0602406228.cache)
Overlapped extent allocation (file 1058056 /Users/Johnny/Library/Caches/Mail/00/15/1220797701-0859034105.cache)
Overlapped extent allocation (file 1058057 /Users/Johnny/Library/Caches/Mail/00/07/1625158921-0865946749.cache)
Overlapped extent allocation (file Overlapped extent allocation (file 179-0596073421.cache)
Overlapped extent allocation (file 1058060 /Users/Johnny/Library/Caches/Mail/00/11/1196125704-0590536112.cache)
Overlapped extent allocation (file 1058062 /Users/Johnny/Library/Caches/Mail/00/11/1422978311-0856115643.cache)
Overlapped extent allocation (file 1058063 /Users/Johnny/Library/Caches/Mail/04/12/2763023681-0835402695.cache)
Overlapped extent allocation (file Overlapped extent allocation (file he)
Overlapped extent allocation (file 1058065 /Users/Johnny/Library/Caches/Mail/00/03/1827339531-0863388223.cache)
Overlapped extent allocation (file 1058066 /Users/Johnny/Library/Caches/Mail/07/03/3539577467-0911802683.cache)
Overlapped extent allocation (file 1058067 /Users/Johnny/Library/Caches/Mail/00/04/1321888006-0860911682.cache)
Overlapped extent allocation (file 1058069 /Users/Johnny/Library/Caches/Mail/00/02/1726249226-0867834918.cache)
1058069 /Users/Johnny/Library/Caches/Mail/00/02/1726249226-0867834918.cache
extent allocation (file %@)",1)
1058070 /Users/Johnny/Library/Caches/Mail/05/01/0121999446-2569076246.cache
Overlapped extent allocation (file 1058071 /Users/Johnny/Library/Caches/Mail/12/14/3415372742-4138529506.cache)
Overlapped extent allocation (file 1058076 /Users/Johnny/Library/Application Support/Skype/joaopaulo_yazigi/chatsync/19/19e520537f725be8.dat)
Overlapped extent allocation (file Overlapped extent allocation (file nc/d5/d5f85bf4508148d5.dat)
Overlapped extent allocation (file 1074308 /Users/Johnny/Library/Caches/com.apple.AddressBook/MetaData/2A56AA5D-FD59-4B78- BF65-25589E601017/ABPerson.abcdp)
Overlapped extent allocation (file 1083386 /Users/Johnny/Music/iTunes/iTunes Music/Podcasts/NEWSWEEK On Air Podcast/NEWSWEEK On Air 1092005.mp3)
Overlapped extent allocation (file Overlapped extent allocation (file XlSOE96L2VJPQ==.png)
Overlapped extent allocation (file 1094018 /Users/Johnny/Library/Application Support/Skype/joaopaulo_yazigi/chatsync/15/150fcbaa76a7fb93.dat)
Overlapped extent allocation (file 1120553 /Users/Johnny/Documents/Yazigi/Events/PRELISTAECOLOCICA2005.doc)
Overlapped extent allocation (file 1182160 /Users/Johnny/Library/Mail/[email protected]@[email protected]/Sent Messages.mbox/Messages/17264.emlx)
Overlapped extent allocation (file Overlapped extent allocation (file /Users/Johnny/Library/Mail/[email protected]@[email protected]/Sent Messages.mbox/Messages/17267.emlx)
Overlapped extent allocation (file 1182217 /Users/Johnny/Library/Mail/[email protected]@[email protected]/Sent Messages.mbox/Messages/17269.emlx)
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Volume Bit Map needs minor repair_
Checking volume information.
Invalid volume free block count_
(It should be 3677631 instead of 3677630)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
Thanks in advance.
JP

You will need to try and repair the drive with Disk Warrior. Otherwise, the only option is to reformat the drive. Note that DW may not be successful in fixing all the errors, and you may end up having to reformat anyway.
It may be possible to fix the problem manually, but it's quite involved. Here's the info:
http://docs.info.apple.com/article.html?artnum=25770
Manually fix Overlapped Extent Allocation Errors without Disk Warrior
Overlapped overlapped extent allocation errors can be the bane of any Mac user's existence. Often, these errors go unnoticed until the problem becomes visible: your Mac might refuse to boot, crash unexpected, or worse, critical data might disappear from the Finder. Disk Utility can detect, but not fix overlapped extent allocation errors, and certain third-party utilities, such as Alsoft Diskwarrior, can fix them, but generally without reporting the consequences.
Overlapped extent allocation error occur when the file system thinks that two files are occupying the same area on the hard disk, hence overlapping on the same "inode," which is the structure which holds the location of the data blocks the file occupies, and also file permissions and flags.
Clearing the "overlapped" or "overallocated" extent allocation essentially means that you'll have to lose some data, because the only way to remove the overlap is to delete the file that's occupying the inode. So, if you suspect, or find out, that the guilty file is a critical system file that resides in one of the hidden system directories such as /etc /var /usr/ or visible system directories such as /System or /Library, and you don't want to reinstall the whole OS (which might not fix the overlapped extent allocation anyway), it's good to have another disk available to copy the files back to your original disk if necessary: a second bootable hard drive or a firewire drive connected to your Mac when you remove the misbehaving file. Just make sure that when you copy the file back to your boot disk that the permissions are correct, so it's best to use the "ditto" command, so that all sticky bits, flags, and permissions are preserved.
In case you didn't know, you don't have to boot from an install CD in order to check for overlapped extent allocations. All you need to do is restart your Mac, while holding down command + S to boot in "single-user mode."
At the command prompt that appears, type:
$ fsck -fy
If you have an overlapped extent allocation, you'll see:
"Overlapped Extent Allocation" (File 123456d)
No matter how many times you run fsck -fy, you'll never be rid of the error.
So, simply issue the following command:
find / -inum 123456 -print
Note the "d" was dropped, or any extra letter that appears after the inode number.
The find will return a file name that matches with the inode number, and the path to that file. If you remove the file then the fsck will not return this error next time you run it.
However, before you can delete the file(s) in single-user mode, you'll need to mount the file system. Type:
$ mount -uw /
When done, issue the "sync" command, and that will flush the write cache so that all pending writes are written from memory to the disk. Also, since most OS X 10.3 Macs use the HFS+ Journaled file system, it might be a good idea to disable the journal before booting into single-user mode by typing:
$ sudo diskutil disableJournal /
then re-enable it when done fixing the overlapped extents and rebooting normally:
$ sudo diskutil enableJournal /
Chris Anderson is a long-time Linux propellerhead who just got his first Mac, an ibook G4, and can't keep his hands off of it. He currently works as a "The Architect" and general visionary for a maker of world-class collectibles.

Need help with pop-up menu and applied Rules

I'm working on a spreadsheet that calculates my profit and losses. I drive a big rig so it needs to keep track of a lot of variables so I know if I'm going to make money on a run or lose money.
I get fuel discounts of various amounts depending on which vendor I fuel at.
I went to a section of the sheet and did a pop-up menu that contains the vendor names.
In the trip section I have cost of fuel per gallon, gallons purchased, total fuel cost, cost minus fuel surcharge.
What I would like to do is apply a rule to cost per gallon box (H7) that takes a variable from the pop-up menu (B40).
So if H7 has $2.58 entered as a cost and B40 has pilot selected then $0.050 will automatically be deducted from the $2.58. This way I will have a history of where I fuel, the deduction is made automatically, and I have a history of fuel prices in a certain region.
If anyone looks at this and sees a simpler way of figuring this calculation please make the suggestion. I want to keep this sheet as small and hassle free as possible.
I have 3 fuel stops per trip with totals that are connected to other areas. Once I get all of this done I will be adding a chart for easy comparison and long range simple tracking to see where improvements can be made and costs are going.
Thanks in advance all help will be appreciated.
Message was edited by: Hwoodwriter for clarification.

The IF Lookup table worked. Did a little modification by placing the table in another part of the chart then hiding that part.
I tried doing the discount as a negative but got a negative total which had a negative affect on my total trip income.
Here is how it works in it's final version.
Gallons on board minus gallons required for trip.
Cost per gallon (retail) multiplied by gallons purchased.
Fuel cost equals (Gallons purchased multiplied by Retail gallon price) minus ("IfLookup" multiplied by Gallons purchased)
Fuel Cost Minus Fuel Surcharge (the actual price I pay, which includes all my savings) equals (Retail Gallon Cost minus Fuel Surcharge minus "IfLookup") multiplied by Gallons Purchased.
Some of my trips take up to 3 fuel stops. So this helps me keep track of each fuel stop and all savings per trip.
I now have where I fueled, the retail price, with discount and surcharge applied. A few keystrokes and I know if a trip is going to be profitable or a loss for me.
Thank you for the help. I now have what I need at my fingertips to make my job more effective.
Thanks again.

Need help with an error message when making changes to an IMAP account

I have several IMAP accounts in my Mac Mail. Today when I tried to edit the, "Full Name" associated with the account I got an error message that said:
Invalid Directory
The account path /Users/kristen/Library/Mail/[email protected]@host365.ISPhost.com is already being used by the account "Silver"
Did I somehow corrupt something? I'm not sure why making this small change to the full name would cause such an error. Please help.
Thanks!!

stop() forcibly kills a thread. You shouldn't use this method because if the thread is in a critical section of code, you can cause data corruption or deadlock.
Instead, if you need to stop execution from another thread, invoke the interrupt() method.
Good luck.

I need help with this error message "seek encountered an internal error"

I wonder if anyone can help me with a Captivate issue: I just upgraded to 5.5 - when I try to insert a video slide I get an error "seek encountered an internal error". The video is a 35.3 MB flv file.
This is a prroject that I have been working on for months and need to switch the video on the slide to an updated video - so I try to delete the video slide that is there and insert a new slide but when browse for the new video file I want to use, I keep getting this error message.

Try <fx:XML>

I need help with Capturing error message

I shot some DVNTSC footage in widescreen on my sony Handycam.
I set up my final capture presets to capture DVNTSC Anamorphic. When I try to capture I get an error message saying... Dropped frames were detected in my video footage.
Final cut gets all hung up and won't capture a thing.
Can anyone help me with this problem?
Thanks

What David is saying is that it's not recommended to capture to your internal drive. It's already running the OS and the software, trying to write video to it at the same time can often cause, imagine that, dropped frames.
The second setup you mention is also not recommended. USB hard drives transfer data in bursts, instead of firewire's stream. This can lead to, imagine that, dropped frames.
And finally, the firewire drive and camera attached to the same FW bus will essentially double the data rate needed, and is not recommended, as it will cause, imagine that, dropped frames.
The solution you should be looking for is a express/34 card with an external SATA attached to avoid the bottlenecks you are experiencing.

Need help with Pop Menu Magic I

I'm working on a site, you can see the index page here: http://www.graphicedgepro.com/gcw/index.html
What I'm attempting to do is have the horizontal menu be in a table cell that has a background and you can see through the menu buttons. I got this to work, but I need the buttons to be centered in the table cell. Right now they they start on the left side.
Is there a way to center the menu bar?
I have Pop Menu Magic II, and I downloaded the update (1.4.9) but when I try to get the menu bar into the cell, it causes the background image to repeat and there is too much space above and below the actual manu bar. I know I can set this version of this extension to center the menu, but if I cannot get it to look like the Pop Menu Magic I I'm using now, it's not going to help. I tried just putting the menu in using Cayenne as the color scheme so it would be easier to find the CSS code that I would need to change. I do not know if I mess with the CSS if I can get the bar to set into the cell the way I need it. I'm just not sure what to do to get this to be right.
Any help would be appreciated.
Thanks in advance.
Nina

Here is your menu converted to PMM2:
http://www.projectseven.com/testing/customers/nina/
Al Sparber - PVII
http://www.projectseven.com
Dreamweaver Menus | Galleries | Widgets
http://www.projectseven.com/go/hgm
The Ultimate Web 2.0 Carousel

I need help with an error message

Has anyone run across this error java.lang.class cast exception ? I dont know what caused it and how to fix it. It also seems to be killing my battery life. Any suggestions? Thanks

Hi and welcome to the forums!
Read user sgardne'spost on how to troubleshoot the cause of the error message.
Let me know if you agree with the steps and how you want to proceed.
Thanks,
Bifocals
uncaught exception java lang classcastexception dated 06-11-2012
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Need help with pop up window!

I'm working on an online graphic design portfolio and one of the pages features online animated Flash banners. The site can be viewed here...
http://truetilldeathhq.com/Skiz/main8_v7.html
I created a pop up window that displays a swf of the banner by putting this code on the View Banner link of each example of work...
on (release) {
var jscommand:String = "window.open('http://www.truetilldeathhq.com/Skiz/banners/336x280DuvalCX9.html','win','height= 296,width=352,left=112,top=330,toolbar=no,resizable=no,location=no,scrollbars=no ');";getURL("javascript:" + jscommand + " void(0);");
Two problems though. First is in Firefox the location bar with the url to the swf is visible, even though I set location=no as a variable in the code (it works ok in Safari). The window is also resizable in Firefox and Safari even though the variable is set to resizable=no. How can I fix this?
Second problem, even though I painstakingly set the left and top variables by trial and error to get the pop up window to open exactly in the center of the "stage" area of the site, when I post it and view it in a browser, the window pops up lower. When I'm in the fla of the site and I preview it in a browser, it's fine, but for some reason when I post the files online and then open it from http://truetilldeathhq.com/Skiz/main8_v7.html, the pop ups come in lower. Any fixes or advice on this?
Thanks for your help!

Forgive me for my ignorance, but I'm new to Flash and any kind of scripting and I didn't quite follow that page you directed me to. Right now I'm working up a Flash template and the action on the link for the banner pages looks like this:
on(rollOver) {
this.gotoAndPlay("s1");
on(rollOut, releaseOutside) {
this.gotoAndPlay("s2");
on (release) {
_root.popup_pressed=1;
_root.scrHEIGHT=240
_root.scroller.scroller.gotoAndStop(2);
_root.TM_title = "Work 1 read more";
_root.READ = 1;
_root.scroller.gotoAndPlay("s1");
How can I work up the on (release) so I'll get a simple pop up window, say 728x90, no scrollbars or resizing, that will open somewhere in the middle of the site? If I wanted a title to the pop up window, how would I do that?
Again, thanks so much for your time and excuse my newbieness.

Need help with pop up windows!

I'm working on a page that's very long and it has your basic
"click on a small thumbnail of an image and a larger version opens
up in a pop up window". I downloaded a free extension from the
Macromedia exchange called Open Picture Window Fever, but it has a
couple of problems. First, there's no option to center the pop up
window, only dimensions you can manually put in. Plus when you
click on the picture, the new window opens but the original page
with the thumbnails automatically goes to the top when the pop up
opens (this is a problem because the page is very long and the user
would have to scroll back down each time they clicked on an image,
a big pain). The only other option I have is to use the Dreamweaver
Open Browser Image Behavior. The problems with that is that you
have to make a html page for each image, which is a drag. Also, I
can get the pop up window to center with a different extension I
downloaded, but I still have the same problem with the original
page jumps to the top.
What can I do to fix this? Anybody have other ideas or free
extensions I haven't tried yet?

> Plus when
> you click on the picture, the new window opens but the
original page with
> the
> thumbnails automatically goes to the top when the pop up
opens
Go to PVII and look for a free extension called Fix Null
Links....
http://www.projectseven.com/
That'll take care of that one.
> The only other option I
> have is to use the Dreamweaver Open Browser Image
Behavior.
Go to E. Michael Brandt's site, and examine JustSo Picture
Window. It's
commercial but it's way nicer than PWF, in my opinion....
http://www.valleywebdesigns.com
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"xslamx" <[email protected]> wrote in
message
news:[email protected]...
> I'm working on a page that's very long and it has your
basic "click on a
> small
> thumbnail of an image and a larger version opens up in a
pop up window".
> I
> downloaded a free extension from the Macromedia exchange
called Open
> Picture
> Window Fever, but it has a couple of problems. First,
there's no option
> to
> center the pop up window, only dimensions you can
manually put in. Plus
> when
> you click on the picture, the new window opens but the
original page with
> the
> thumbnails automatically goes to the top when the pop up
opens (this is a
> problem because the page is very long and the user would
have to scroll
> back
> down each time they clicked on an image, a big pain).
The only other
> option I
> have is to use the Dreamweaver Open Browser Image
Behavior. The problems
> with
> that is that you have to make a html page for each
image, which is a drag.
> Also, I can get the pop up window to center with a
different extension I
> downloaded, but I still have the same problem with the
original page jumps
> to
> the top.
>
> What can I do to fix this? Anybody have other ideas or
free extensions I
> haven't tried yet?
>

Need Help with this Error message in App World

hi, i just install the new version of app world. when i try to open my world or my account, i got this error message "THERE IS AN ISSUE WITH THE CURRENT SESSION. PLEASE LOGIN TO CONTINUE. (Error Id: 30702).
when i press Ok..nothing happen at all..anyone please help..i already try install the previous version app world but still the same.

Hello azain
Welcome to the Community
Please check the Article below to help you solve the issue.
"Unable to login to your BlackBerry ID account" or "Unable to update your BlackBerry ID account info...
Goodluck and please let us know if it helps you
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Need help with decyphering error message!!!

I am trying to do a data merge in InDesign CS3 and I am getting this error message:
"unknown software exception (0xc000000d) occurred in the application at location 0x78138aa"
I have been messages that my hard drive is getting full and think this may be related to to that but I need to be sure that something else isn't going on.
Can anyone point in in the right direction???!!??

I am getting the same message except that the location is in 0x78138a8c. I am trying to export a multiple page document as a PDF. Sometimes the error occurs with the whole document, and other times it will export some of the document, leaving some pages blank. When I then try to export those pages as individual filles it says:
"The exception unknown software exception (0xc000000d) occurred in the application at location 0x78138a8c. Click on OK to terminate the program"
I am using a trial version that I downloaded from the Adobe page.
Any idea what I could try??

Need help with Pop Up message

Similar Messages

Maybe you are looking for