Need Help with power supply reccomendations for my graphics card

hi
i have a MSI GeForce GTX 780 Graphics card... i built my own system, i also got a rosewill rx750 power supply in it which i think is causing me problems, the computer works great until i get into games like titan fall and try and get into a game then it restarts the computer on its own.. has done this with a few games, but it works fine when surfing the net and so forth, i have read its to do with the power supply being week and also read my chosen power supply isnt that good... anyone got any recommendations for me that i should look at or am i looking in the wrong direction with whats wrong with my pc... any help would be great thanks

yes the PSU is  the most important choice out there and corsair and seasonic are the best out there! (never buy cheap PSU's as like abvolt said a cheap one can easily kill your more expensive parts)
Cheap PSU = made of the most cheap parts they could get "think cheap shanghai parts are used that may be of any quality good or awful as its just what they could get for the lowest price" (ever bought anything that was super cheap they break very easily)
Quality PSU = the use of good quality well made parts and will have very good testing done on them to make sure they are stable and pass very tight regulations and conform to specs for 10-30 different factors each.
a cheap low quality PSU I class as a paper weight as it will never go near a computer (maybe i would use one as a basic bench PSU for things i do not care if they die or just for testing a fan or something that rubbish dirty power is not really a major problem but silicon is not tolerant to dirty power and will kill parts)

Similar Messages

  • Need help with power supply & graphics card upgrades

    I have a HP Pavilion p6320y that I bought 8 months ago. AMD Phenom II x4820 Quad Core processor.   I play WoW and since the last big patch, have been suffering with low fps. I updated drivers and followed all the advice given to me by Blizz and finally figured out that my Nvidia GeForce 9100 (integrated graphics) isn't good enough anymore.
    I checked my computer and discovered that I have a 300w power supply (12V) and read on another post here that something stronger than 300w is needed to run a decent graphics card.
    Now for my questions:
    How much of a power supply can I upgrade to without hurting my computer, but will be enough to run a good card?
    What would be a good graphics card for this computer?
    I've been looking at the Nvidia GeForce GTX 460 1GB GDDR5 PCI Express graphics card and wonder if that will work on my computer.  Most of the nicer cards seem to be the PCI Express and I'm not sure if that will work.
    Any advice will be most helpful. I have some experience with the inner workings of my PC and would like to fix this myself instead of running to the closest computer shop and paying someone else to. Thanks!
    This question was solved.
    View Solution.

    Well, you are starting out from a fairly low baseline with the integrated graphics. It will not cost much to have a substantial increase if all you want to do is run WoW without error messages. Yes, the 300w power supply is an issue and rules out any card that will require its own power (i.e. needs its own power cord like a hard drive) but there are several mid-grade cards that can run off bus power alone (i.e. just from the pci-e slot itself). Just taking a quick look at newegg.com I see the following:
    GeForce 9400 under $50
    Radeon HD 4650 under $50
    GeForce 9500GT a little over $50
    Any of these should get you where you want to be and not require a PS upgrade. The slot you have available is a PCI Express x16 slot so don't look at AGP cards; they will not work. If you want to install the card you mention you need to get a better PSU.

  • Need help with power supply.

    My computer will not come on at all. When you hit the power switch on the power supply, all the fans in my computer begin to come on for a second but stops. Can someone help me. I 've tried 3 power supplies and none of them worked.
    nVidia K89 Neo2
    Arctic Cooling freezer 64
    TNT2 Rage
    Sony DVD-writer
    AMD 64 3500+

    hammonton
    Quote
    randyorton 1st Post
    My computer will not come on at all
    Quote
    When you hit the power switch on the power supply, all the fans in my computer begin to come on for a second but stops
    Quote
    randyorton 2nd Post
    That's the thing. It won't come on at all
    Its good to help
    Quote
    I've had this problem before and solved it by clearing the CMOS
    but please read the post.

  • Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers,  threw programs away,  only have Adobe Acrobat X Standard,  need a code to unlock program?

    Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7. 

    You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

  • I think I need help with driver (software) settings for D110a

    I think I need help with driver (software) settings for D110a all-in-one
    Product: D110a all-in-one
    OS: Windows XP Professional
    Error messages: None
    Changes before problem appeared: None--new installation
    The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
    IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
    When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
    least acceptable, Some would probably say good or very good.
    It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
    out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
    Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
    printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
    trunk is a round, solid object.
    I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
    I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
    how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
    I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
    e-mail me at [email protected]

    brazzmonkey wrote:
    Hi everyone,
    I noticed the following message when network starts on my gateway
    Warning: This functionality is deprecated.
    Please refer to /etc/rc.conf on how to define a single wired
    connection, or use a utility such as netcfg.
    Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
    Currently, my set up is the following (old way):
    INTERFACES=(eth0 eth1)
    eth0="dhcp"
    eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
    ROUTES=(!gateway)
    eth0 is on DHCP because the IP is dynamically assigned my ISP.
    eth1 has a fix IP because it's on the LAN side.
    No problem to use DHCP on eth0 with the new settings.
    But for eth1, I don't know what I am supposed to write for gateway.
    Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
    Any guidance appreciated, thanks.
    brazzmonkey,
    you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
    Use, f.e., netcfg:
    Comment your old lines.
    In /etc/rc.conf insert:
    NETWORKS=(Eth0-dhcp Eth1-static)
    DAEMONS=(..... !network @net-profiles ....)
    In /etc/network.d create 2 files:
    First one is named  Eth0-dhcp.
    Contents:
    CONNECTION="ethernet"
    DESCRIPTION="Whatever text"
    INTERFACE=eth0
    HOSTNAME="your hostname"
    IP="dhcp"
    DHCP_TIMEOUT=15
    Second one is named Eth1-static.
    Contents:
    CONNECTION='ethernet'
    DESCRIPTION='whatver'
    INTERFACE='eth1'
    HOSTNAME='hname'
    IP='static'
    ADDR='192.168.0.10'
    GATEWAY='192.168.0.1' # your gateway IP
    DNS=('192.168.0.1') # your DNS server
    The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
    Hope it helps.
    mektub
    PS: netcfg must be installed.
    Last edited by Mektub (2011-07-20 14:07:05)

  • I need help with downgradeing my ios for my ipod touch 4th gen

    i need help with downgradeing my ios for my ipod touch 4th gen

    As has alwys been the case, you cannot go back.
    Sorry

  • [solved]Need help with a bash script for MOC conky artwork.

    I need some help with a bash script for displaying artwork from MOC.
    Music folders have a file called 'front.jpg' in them, so I need to pull the current directory from MOCP and then display the 'front.jpg' file in conky.
    mocp -Q %file
    gives me the current file playing, but I need the directory (perhaps some way to use only everything after the last  '/'?)
    A point in the right direction would be appreciated.
    thanks, d
    Last edited by dgz (2013-08-29 21:24:28)

    Xyne wrote:
    You should also quote the variables and output in double quotes to make the code robust, e.g.
    filename="$(mocp -Q %file)"
    dirname="${filename%/*}"
    cp "$dirname"/front.jpg ~/backup/art.jpg
    Without the quotes, whitespace will break the code. Even if you don't expect whitespace in any of the paths, it's still good coding practice to include the quotes imo.
    thanks for the tip.
    here it is, anyhow:
    #!/bin/bash
    filename=$(mocp -Q %file)
    dirname=${filename%/*}
    cp ${dirname}/front.jpg ~/backup/art.jpg
    then in conky:
    $alignr${execi 30 ~/bin/artc}${image ~/backup/art.jpg -s 100x100 -p -3,60}
    thanks for the help.
    Last edited by dgz (2013-08-29 21:26:32)

  • Going to Australia and need help with Power converters

    Facts:
    US uses 110v on 60hz
    Australia 220v on 50hz
    Making sure I understood that correctly.  Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD.  My DS, and Cell are charging via USB to save trouble of other cables.
    Ideas I've had or thought of:
    1.  Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet.  Not sure if this fixes the voltage/frequency change.
    2.  Get power converters for all my devices.  But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
    3.  Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday).  Unless Best Buy carrys one.  

    godzillafan868 wrote:
    Facts:
    US uses 110v on 60hz
    Australia 220v on 50hz
    Making sure I understood that correctly.  Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD.  My DS, and Cell are charging via USB to save trouble of other cables.
    Ideas I've had or thought of:
    1.  Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet.  Not sure if this fixes the voltage/frequency change.
    2.  Get power converters for all my devices.  But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
    3.  Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday).  Unless Best Buy carrys one.  
    Check the specs on input voltage/frequency of your power supplies.
    Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all.  These will just need a connector adapter.
    Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
    For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • Need help with power adopter

    Hey guys!
    here are my pc spec - well its old pc spec!
    - i7 950 3.07Ghz
    - msi x58m
    - 1GB x 6 = 6 GB crucial ...
    - HDD C: - WD raptor sata 2 150gb
    - Club 3d ATI radeon HD 4890
    - 3 extra hdd sata 2
    - chieftec 3 bay HDD box for 4 extra sata2 HDD - I have 4 hdd there but they dont work all the time i turn them on only when i need it
    - chieftec 750W ... aps-750c
    now i did some changes!
    i put my ATI card into my 2nd back up pc and updated the ram, so now i have :
    - EVGA GTX 580 classified 3 GB
    - 4GBx3 = 12GB corsair
    1st two weeks all was fine, but now i CANT turn on my pc....... so in order to turn it on i disconnect the power cable, wait for some time then connect it again and if i try to turn it on right away it will not work , so after i connect the cable i wait for like 30 mins and then its strarts working...... after its turned on there are no problems, all working fine, but each time after i turn it off i just CANT turn it on, and have to make that "procedure" each time to turn on my pc!
    now i took that chieftec 3 bay hdd box and put it on my back up pc, was hoping it will be better , but nope
    is it really power? does the 750w really is not enough? any recomendations for a new power box?

    Your power supply might be a little marginal for the GTX 580.  They require that the 12 volt supply be capable of 42 amps or 405 watts.probably the only way to check it would be to use an external voltmeter.  Any chance you could return the GTX 580 and possibly go with a GTX 670?  It only reqiures 30 amps.  Here is what I found on the specs on the 12 volt rails
    "The PSU is rated for an output power up to 550 watts and can yield up to 450 watts across its +12V rail. Thus, its effective output power (i.e. what you can get from it in a real computer that consumes mostly from the +12V power rail) is about 500 watts, which is good. The +12V rail is split into two “virtual” lines, 25 amperes each."
    If the initial surge with everything turned on at once I would not feel comfortable with your system and that power supply.  If I read you right you have three additional hard drives inside the unit.  If you can disconnect  the power to them for a quick test and turn on your computer you might isolate your problem.  Typically each disk requires about 20 watts on startup

  • Need help with output type EDI for ERS

    All,
    I want to be able to run and ERS settlement and have the invoices created sent via EDI/XML to the supplier.   I have several questions on the set up.
    1)  I have output type ERS6 which is defined as ERS EDI.  I assume because it does not start with Z* this is SAP standard, so I shouldn't have to modify any of this.
    2)  I've added my supplier to this output type. 
    3)  I assume I need to create a partner profile for this supplier?  If so can someone tell me the message type to use?
    Is there any set up I'm missing in this process?   I've executed ERS but do not get an idoc and I'm fairly certain it's because I haven't done the partner profile set-up.
    Thanks for your help.
    Sandra

    Hi,
    You don't have to modify thise setup unless you have any customized requirement.
    You are missing partner profile setup.Carry out the setup and run MRRL tcode to create the idocs
    Enter the following values using tcode WE20.
    Field                                       Value
    Message type                         GSVERF
    Partner type                             LI (vendor)
    Partner function                        LF (vendor)
    Port                                         SUBSYSTEM ( Port to your middleware)
    Output mode                            such as Collect IDocs
    Basic type                                GSVERF01
    Application                                 MR
    Output type                                ERS6 or the type you have defined
    Regards,
    Karuna

  • Hi i need help with getting my homework for school

    im in a nine week class that ends tommorw and need help go\etting my program working properly these are the requirements ofr the assignments:
    Modify the Inventory Program by adding a button to the GUI that allows the user to move
    to the first item, the previous item, the next item, and the last item in the inventory. If the
    first item is displayed and the user clicks on the Previous button, the last item should
    display. If the last item is displayed and the user clicks on the Next button, the first item
    should display.
    · Add a company logo to the GUI using Java graphics classes.
    Modify the Inventory Program to include an Add button, a Delete button, and a Modifybutton on the GUI. These buttons should allow the user to perform the corresponding actions on the item name, the number of units in stock, and the price of each unit. An item added to the inventory should have an item number one more than the previous last item. Add a Save button to the GUI that saves the inventory to a C:\data\inventory.dat file. Use exception handling to create the directory and file if necessary. Add a search button to the GUI that allows the user to search for an item in the inventory by the product name. If the product is not found, the GUI should display an appropriate message. If the product is found, the GUI should display that product’s information in the GUI. Post final .class and .java files as an attachment.
    this is what i have there are three java files im puttong in here
    first is the panel frame
    import java.awt.GridLayout;
    import java.awt.BorderLayout;
    import java.awt.FlowLayout;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.JButton;
    import javax.swing.JLabel;
    import java.awt.GridBagLayout;
    import java.awt.GridBagConstraints;
    import java.awt.Component;
    import javax.swing.SwingConstants;
    import javax.swing.Icon;
    import javax.swing.JComboBox;
    import javax.swing.JTextArea;
    import javax.swing.JList;
    import java.util.*;
    import java.text.NumberFormat;
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.net.URL;
    import java.io.*;
    import java.util.Scanner;
    import javax.swing.JOptionPane;
    import java.text.NumberFormat;
    public class PanelFrame extends JFrame
         private JPanel buttonJPanel; // panel to hold buttons
         private JButton buttons[]; // array of buttons
         private JLabel label1; // JLabel iventory number
         private JLabel label2; // JLabel product name
         private JLabel label3; // JLabel product price
         private JLabel label4; // JLabel product in stock
         private String p_ProductName; // private variable for the employee name.
         private int p_UnitCount; // private variable for the hours worked.
         private double p_UnitPrice; // private variable for the hourly wage.
         private int p_ItemNumber; // private inventory number
         //create inventory object
         Inventory myInventory = new Inventory ();
    // no-argument constructor
    public PanelFrame()
    super( "Panel Demo" );
    //Add items to the inventory within the Invntory
              myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
              myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
              myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
              myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
              myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
    setLayout( new FlowLayout() ); // set frame layout
    // JLabel constructor with a string argument
              label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
              label1.setToolTipText( "This is Inventory number" );
              add( label1 ); // add label1 to JFrame
              label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
              label2.setToolTipText( "This is Product Name" );
              add( label2 ); // add label1 to JFrame
              label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
              label3.setToolTipText( "This is product Price");
              add( label3 ); // add label1 to JFrame
              label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
              label4.setToolTipText( "This is Quanity in stock: " );
              add( label4 ); // add label1 to JFrame
    buttons = new JButton[ 4 ]; // create buttons array
    buttonJPanel = new JPanel(); // set up panel
    buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
              String names[] = { "First", "Previous", "Next", "Last"  };
              JButton buttons[] = new JButton[ names.length ];
              // create and add buttons
              for ( int count = 0; count < buttons.length; count++ )
              buttons[ count ] = new JButton( names[ count ] );
              buttonJPanel.add( buttons[ count ] ); // add button to panel
              } // end for
    // setup the logo for the GUI ...image needs to be in same directory as source code
              URL url = this.getClass().getResource("book103.gif");
              Image img = Toolkit.getDefaultToolkit().getImage(url);
              // scale the image so that it'll fit in the GUI
              Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
              // create a JLabel with the image as the label's Icon
              Icon logoIcon = new ImageIcon(scaledImage);
              JLabel companyLogoLabel = new JLabel(logoIcon);
              companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
              // add the logo to the GUI
              getContentPane().add(companyLogoLabel, BorderLayout.WEST);
    add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
    } // end PanelFrame constructor
    } // end class PanelFrame

    this is the original part again with the code tag added
    import java.awt.GridLayout;
    import java.awt.BorderLayout;
    import java.awt.FlowLayout;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.JButton;
    import javax.swing.JLabel;
    import java.awt.GridBagLayout;
    import java.awt.GridBagConstraints;
    import java.awt.Component;
    import javax.swing.SwingConstants;
    import javax.swing.Icon;
    import javax.swing.JComboBox;
    import javax.swing.JTextArea;
    import javax.swing.JList;
    import java.util.;
    import java.text.NumberFormat;
    import javax.swing.;
    import java.awt.;
    import java.awt.event.;
    import java.net.URL;
    import java.io.*;
    import java.util.Scanner;
    import javax.swing.JOptionPane;
    import java.text.NumberFormat;
    public class PanelFrame extends JFrame
    private JPanel buttonJPanel; // panel to hold buttons
    private JButton buttons[]; // array of buttons
    private JLabel label1; // JLabel iventory number
    private JLabel label2; // JLabel product name
    private JLabel label3; // JLabel product price
    private JLabel label4; // JLabel product in stock
    private String p_ProductName; // private variable for the employee name.
    private int p_UnitCount; // private variable for the hours worked.
    private double p_UnitPrice; // private variable for the hourly wage.
    private int p_ItemNumber; // private inventory number
    //create inventory object
    Inventory myInventory = new Inventory ();
    // no-argument constructor
    public PanelFrame()
    super( "Panel Demo" );
    //Add items to the inventory within the Invntory
    myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
    myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
    myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
    myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
    myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
    setLayout( new FlowLayout() ); // set frame layout
    // JLabel constructor with a string argument
    label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
    label1.setToolTipText( "This is Inventory number" );
    add( label1 ); // add label1 to JFrame
    label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
    label2.setToolTipText( "This is Product Name" );
    add( label2 ); // add label1 to JFrame
    label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
    label3.setToolTipText( "This is product Price");
    add( label3 ); // add label1 to JFrame
    label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
    label4.setToolTipText( "This is Quanity in stock: " );
    add( label4 ); // add label1 to JFrame
    buttons = new JButton[ 4 ]; // create buttons array
    buttonJPanel = new JPanel(); // set up panel
    buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
    String names[] = { "First", "Previous", "Next", "Last" };
    JButton buttons[] = new JButton[ names.length ];
    // create and add buttons
    for ( int count = 0; count < buttons.length; count++ )
    buttons[ count ] = new JButton( names[ count ] );
    buttonJPanel.add( buttons[ count ] ); // add button to panel
    } // end for
    // setup the logo for the GUI ...image needs to be in same directory as source code
    URL url = this.getClass().getResource("book103.gif");
    Image img = Toolkit.getDefaultToolkit().getImage(url);
    // scale the image so that it'll fit in the GUI
    Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
    // create a JLabel with the image as the label's Icon
    Icon logoIcon = new ImageIcon(scaledImage);
    JLabel companyLogoLabel = new JLabel(logoIcon);
    companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
    // add the logo to the GUI
    getContentPane().add(companyLogoLabel, BorderLayout.WEST);
    add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
    } // end PanelFrame constructor
    } // end class PanelFrame

  • Need help with Photoshop and "Licensing for this product has stopped working" message. Adobe fix isn't working.

    I am still using CS3. A while back I received an error: "Licensing for this product has stopped working" for my CS3 programs. I used the recovery program suggested by Adobe and was able to get Illustrator, Flash and Dreamweaver to work, but I still can't open Photoshop or In Design. I went back to the Adobe site and did every other trick they suggested to fix the error, but nothing has worked.
    I then tried to uninstall photoshop from my CS3 suite (so I could reinstall) but got a JavaScript Alert: "Critical errors were found in set up. Please see set up log for file details." Seeing as I am not the best with the behind the scenes technical stuff, I have no idea what this means or where the set up log even is. Any help anyone can provide?
    I have had CS3 installed on my computer for over a year. I started having problems about 4 months ago.

    I am having similar problem.  Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message.  So now I can not run Illustrator, Photoshop, or even Adobe Reader.  These are properly licensed for about a year. I get "License for product has stopped working".  Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days.  Was on phone support hold today for over 3 hours before line went dead with no help.  What is up with adobe support?  Can anyone help?

  • Need help with date range searches for Table Sources in SES

    Hi all,
    I need help, please. I am trying to satisfy a Level 1 client requirement for the ability to search for records in crawled table sources by a date and/or date range. I have performed the following steps, and did not get accurate results from Advanced searching for date. Please help me understand what I am doing wrong, and/or if there is a way to define a date search attribute without creating a LOV for a date column. (My tables have 500,00 rows.)
    I am using SES 10.1.8.3 on Windows 32.
    My Oracle 10g Spatial Table is called REPORTS and this table has the following columns:
    TRACKNUM Varchar2
    TITLE Varchar2
    SUMMARY CLOB
    SYMBOLCODE Varchar2
    Timestamp Date
    OBSDATE Date
    GEOM SDO_GEOMETRY
    I set up the REPORTS table source in SES, using TRACKNUM as the Primary Key (unique and not null), and SUMMARY as the CONTENT Column. In the Table Column Mappings I defined TITLE as String and TITLE.
    Under Global Settings > Search Attributes I defined a new Search Attribute (type Date) called DATE OCCURRED (DD-MON-YY).
    Went back to REPORTS source previously defined and added a new Table Column Mapping - mapping OBSDATE to the newly defined DATE OCCURRED (DD-MON-YY) search attribute.
    I then modified the Schedule for the REPORTS source Crawler Policy to “Process All Documents”.
    Schedule crawls and indexes entire REPORTS table.
    In SES Advanced Search page, I enter my search keyword, select Specific Source Group as REPORTS, select All Match, and used the pick list to select the DATE OCCURRED (DD-MON-YY) Attribute Name, operator of Greater than equal, and entered the Value 01-JAN-07. Then the second attribute name of DATE_OCCURRED (DD-MON-YY), less than equals, 10-JAN-07.
    Search results gave me 38,000 documents, and the first 25 I looked at had dates NOT within the 01-JAN-07 / 10-JAN-07 range. (e.g. OBSDATE= 10-MAR-07, 22-SEP-07, 02-FEB-08, etc.)
    And, none of the results I opened had ANY dates within the SUMMARY CLOB…in case that’s what was being found in the search.
    Can someone help me figure out how to allow my client to search for specific dated records in a db table using a single column for the date? This is a major requirement and they are anxiously awaiting my solution.
    Thanks very much, in advance….

    raford,
    Thanks very much for your reply. However, from what I've read in the SES Admin Document is that (I think) the date format DD/MM/YYYY pertains only to searches on "file system" sources (e.g. Word, Excel, Powerpoint, PDF, etc.). We have 3 file system sources among our 25 total sources. The remaining 22 sources are all TABLE or DATABASE sources. The DBA here has done a great job getting the data standardized using the typical/default Oracle DATE type format in our TABLE sources (DD-MON-YY). Our tables have anywhere from 1500 rows to 2 million rows.
    I tested your theory that the dates we are entering are being changed to Strings behind the scenes and on the Advanced Page, searched for results using OBSDATE equals 01/02/2007 in an attempt to find data that I know for certain to be in the mapped OBSDATE table column as 01-FEB-07. My result set contained data that had an OBSDATE of 03-MAR-07 and none containing 01-FEB-07.
    Here is the big issue...in order for my client to fulfill his primary mission, one of the top 5 requirements is that he/she be able to find specific table rows that are contain a specific date or range of dates.
    thanks very much!

  • Is my power supply enough for my Video Card

    Hello, is this PSU good enough for my gfx card or should I upgrade it?!!
    Intel Core i3-3220 CPU 3.30GHz
    CORSAIR Vengeance 8GB 2 x 4GB DDR3 1600
    WD Caviar Blue 1TB SATA 6Gb/s WD10EZEX
    MSI N560GTX-Ti Hawk
    Monitor ViewSonic VX2240w 22"
    ASUS P8B75-V Intel B75 SATA 6Gb/s USB 3.0
    HEC Cougar Evolution
    PSU XFX Core Edition PRO550W

    yes its fine but very close to its limits wattage wise but for amps your all good! so that card will work fine but do not get a x70gtx or higher as then you will be in trouble if you do so as they need more wattage to be stable! 

  • I have a HP Pavilion a6603w. I want to upgrade power supply to run powerful graphic card. Suggest

    I have a HP pavilion a6603w desktop model number FK555AA-ABA a6603w.  I have a low to mid level graphics card, which is the most that my power supply will handle. 
    I want to get a stronger power supply to run a high end graphics card with a self cooling fan.  Can anyone suggest an excellent, reliable power supply brand and model that will fit into my desktop case with minimum fuss?  I am not tech savy but I have replaced my video card and hard drives with no problem. 
    Thanks,
    Lugnut 

    lugnut1204 wrote: I have a HP pavilion a6603w desktop model number FK555AA-ABA a6603w.  I have a low to mid level graphics card, which is the most that my power supply will handle. I want to get a stronger power supply to run a high end graphics card with a self cooling fan.  Can anyone suggest an excellent, reliable power supply brand and model that will fit into my desktop case with minimum fuss?  I am not tech savy but I have replaced my video card and hard drives with no problem.  Thanks, Lugnut 
    Hello lugnut1204, I checked the specifications for your system and is appears the system shipped with a 250 power supply. The dimensions for this power supply are 5 15/16 inches wide, 5.5 inches long, and 3 3/8 inches tall. Since your system is a MicroATX version, you would be slightly limited to a power supply of the same size as the original power supply.
    Here  is a link to Newegg where a Corsair 600 watt power supply can be found with almost the exact same physical size as you original 250 watt version. The Corsair power supply dimensions are 5.9 inches wide, 5.5 inches long, and 3.4 inches tall.
    If you get a power supply too long, it may interfer with the back of the CD\DVD drives.
    You would need to locate a video card that you wanted and make sure the power supply requirements were less than the 600 watt Corsair model. Most of the mid to higher end cards require at leaset a 400 to 500 watt or greater power supply.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

Maybe you are looking for