Need help with question about indesign 2014...

I am using indesign 6 on a pc - simple question: when I update to indesign 2014, will the update keep all of my previous and current work?

Yes. Your documents will be unaffected by any new versions you install unless you open them in the new version and save them with the same name, then you will lose the ability to open them again in the old version.

Similar Messages

Need help with question about Microsoft Excel?

I have recently begun using Microsoft Office for Mac. My question is related to the Excel program. I have used this for years on a PC where when the program opens, it shows a Workbook with a single page. However, on the Mac, when it opens, it shows many pages, the first going from column A to G, the second going from H to N, etc. and each page with the text "Click to add data". This continues forever. I would like to have just one sheet as on the PC. I have not found a way to limit this view to a single page. I have looked in the Preferences and in "View", but nothing seems to change the configuration. Any suggestions?
Thanks

My zoom only shows the magnification and does not give a "one page" option. However, I did find an icon that I loaded into the menu bar which gives the one page view. This may be due to the version 2004 that I am using.
I also find that if I want to change the number of columns and rows, I change the size of each. I assume this is correct.
Thanks for the help. This is slightly different that the PC version, but I am sure over time, there will be no problem.

Need help with question about upgrading phone

Okay, so, here's what's going on:
I currently have a Samsung Galaxy Nexus on Verizon.
It's dying/freezing/battery life is terrible. Looking to upgrade.
I don't have an upgrade available for my line, but my wife does.
She's giving me permission to use hers, which a Verizon rep told me is fine.
I want to use her upgrade to get a Samsung Galaxy Note II.
The best price (subsidized) right now is on Dell's site ($169.99), which I could price-match at Best Buy (employee confirmed this). However, it's still a little high for me.
I could get a better price by adding a line with this device - shave off $40 ($129.99).
So here's my question: is there any way to add a line, get some immediate savings on the purchase, then immediately cancel the line (maybe only taking a little bit of a hit, getting most of the cost reimbursed for not using it)? In other words, how can I get this phone as cheap as possible?
Thanks for your suggestions!

If you add a line as you suggest, that new line will come with a 2 year (24 month) contract for service that will have a $350 Early Termination Fee (ETF) if you cancel the line immediately like you indicated. There goes the thought of getting the Note II for the cheaper than the upgrade price.
I recommend going with the price match upgrade @ $169.99 at Best Buy. I can confirm they do the price match. I bought my last phone from Best Buy and they matched the Radio Shack price I brought them and I had a good experience.
Good luck.

I need help with just about everything...........

I realize that this is a site dedicated to all things Apple, but I am hoping I can't get some honest and impartial help on building the best home network and entertainment system.
I currently have an XP Media Center desktop computer in an office of my home where all of the network stuff is at and is connected via ethernet. I also have a Mac G4 MDD 1.0 that I am using in another room for Adobe Creative Suite to do my own promotional items and I have about a 50' Cat 6 cable running back to the router in the office. I also have a Vista laptop that is connected wirelessly but believe it is only a "g" network? I don't really use this a whole lot but take it out to job sites and such so there is information I need to send back and forth to my external drives hooked up via ethernet to my router. I am in the process of getting a new MacBook Pro as well.
I have a PS3 hooked up to my home entertainment center but unsure of how to make everything work the way that I want. Here is what I would like to be able to do. 1) Networking of all computers and external drives, 2) Operate my Mac G4 Wirelessly, 3) Addition of internal bluetooth to G4 so I can get a wireless keyboard and mouse, 4) Ability to play iTunes from external hard drives on home entertainment center, 3) Ability to stream media from internet and hard drives to HDTV in home entertainment center
I am looking to upgrade my router to dual band with either the Airport Extreme or the Netgear WNDR3700. I don't know which to get and have found about the same amount of pros and cons for each on the web. Any suggestions and why?
Do I need an Apple TV or a Netgear WNHDEB111 or other Digital Media Reciever???
What else would you recommend to accomplish my goals and why do you recommend the part and brand that you do.
Thank you in advance for any and all assistance I can get.

I getting a message saying[ a blackberry identity update is needed. Would you like to install it now yes or no /when I click yes I also getting this message[ BlackBerry identity installation failed please try again later. Keep getting this same message over and over

Need help with info about the possibility of altering images when saved in a different format

I am very new to the design world. I have a printing business and received and image to be printed in Adobe Acrobat (I think). I needed to resize the image to be printed and took it into Photoshop CS6 where I cropped the edges. I then resave it as a PDF and took into a printer software, Fiery. Fiery has an Impose function where you can repeat an image to layout it on the correct paper size. It essentially just copies the original image several times depending on the layout. This particular image I repeated to 3 up and 1 across. When printed it came out with a magenta streak through the center image only. I have had the machine checked and they are adamant it's not a printer issue but a software issue. That once I altered the original image by resizing it that I altered the image and that I can't expect it to come out as seen on the screen. I've printed it all sorts of different ways and it only occurs with the 3 up 1 across image. I know that images can be changed when saved from program to program but this situation does not make sense that it is only the one area and layout that this shows up. I would appreciate any help, input, answers that anyone has. Again, I'm new to this and would like to understand if this is a potential for further printing jobs so that I can do what I need to avoid this situation.
Thank you for your time.
Jessica

Jessica,
Without knowing how the original graphic was created it is hard to tell you how to handle it. What is the name of the file? (Only the file suffix is important). If the file's origin was in a drawing program and/Or InDesign, then the document should be handled differently if the document is a raster image best handled by a program like Photoshop.

Hello, I need help with info about upgrading windows.

Hi, after having my PC for almost a year, I'm now I'm wondering if it's possible to upgrade my windows 7 32-bit to a windows 7 64-bit?
Here's a link to a website which has my PC and it's specs....
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=6288750&CatId=4928#
If it is possible to upgrade my windows 7 32-bit to a windows 7 64-bit, then how do I do it? And what things will be required?
Thanks.

upgrade is the wrong word (you can't upgrade from 32 to 64)you can install 64 bit you can use the lenovo disc to just write over whats on your HDD or you can formate your HDD then install 64 bit using the lenovo media info is here http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT002492 Edit: everything you need is on the disc...drivers & Apps, windows once you get it installed run system update to get system drivers up to date
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Need help with hyperlinks in InDesign CS3 to PDF

I've done everything I can see in the forums, in the InDesign help and in InDesign for Dummies... but other than spelling out the entire URL in the text (IE where you can see it in the document) I cannot get a URL hyperlink to work after exporting it to a PDF file. The sample document I used does show the link in the hyperlink pallette... I can even use the "forward" and "back" to identify the link in the document and actually open the link online from there. But - the link is not working in the PDF file. What am I doing wrong? I'm totally confused. Normaly, I figure these kinds of things out and this one seemed to be simple/straight forward.
Thanks!

If you're not using tagged PDF, then use it. If you are, disable it. Also, make sure you're fully patched to 5.0.4.
Bob

Could someone help with question about PNG export from Illustrator?

I am having issues with PNG exports from Illustrator not opening up once exported.

ANd exactly sorry, this is useless. You have not provided any details about your export settings, version of AI, system info, how you are trying to view and so on. Just saying that it doesn't work is simply not good enough.
Mylenium

Help with questions about upgrading iLife'08 onto an older PowerBook G4

I am seeking help/advice for a very low tech guy. I upgraded my PowerBook G4 (ancient I know but I have trouble with our thow away society), to Leopard 10.5.2. However, my iDVD no longer works. I plan on upgrading to iLife'08, but based on the system requirements, I am not certain all of the features (i.e. iMovie'08) will work on my older processor. Before I upgrade to iLife, can anyone tell me if I should do it and if they will work on my all the features will work on my PowerBook G4?

You can upgrade to iLife 08. All the apps should install except iMovie.
However, if you have iMovie 06, it will still work. And if you don't have iMovie 06, you can get it as a free download on the iMovie 08 Support Page.

Need help with info about Z87 MPOWER MAX

Im coming from LGA 775. Dying for an upgrade. Im going with the intel 4770k and msi Z87 MPOWER MAX board. I noticed the board has two 8-pin cpu power ports. Why is this? Im using my old PSU which is a 1200 watt still kicking so im saving money here until a few more months...
So the real concern is I really don't know why there are 2 8-pin power ports for the CPU... Can anyhone school me on that please. Thanks in advance..

Quote from: Sea Dog on 29-September-13, 14:15:14
Both EPS/ATX headers on the mainboard are to better the balance the CPU power load. The Z87 Power Max is a high end enthusiast board for serious OC'ing, etc. If the PSU does not have the ability to provide both headers, an Athena YEPS828 splitter works very well.
Some PSUs don't have the ability at low power, especially in sleep or hibernate type modes to fire up the system again. A fan connected directly to the PSU eliminates, in some cases, this problem.
Hi Sea Dog,
My mpower max will sometimes not boot up - when I press the power switch there is no response at all, no fans. Usually when this happens, both the red and blue leds (which indicate which gear the OC Genie operates at) are lit.
I get the system to boot by removing the 24 pin power cable, removing and replacing one stick of ram, hook up the power, then I can use the switch to turn on as normal.
My psu is Corsair AX1200 and is not very old. Do you think I am having the problem you mentioned? or some other issue? Bios is latest, 1.6
Thanks

HT5312 i need help with the security questions is there some way to get you to remind me what they were from e-mail or other wise

I need help with the security Questions is there some way to get you to remember them by e-mail of other wise

Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

Need help with the Vibrance adjustment in Photoshop CC 2014.

Need help with the Vibrance adjustment in Photoshop CC 2014.
Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value. Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
Thanks,
GD

Thank you for your reply.
Yes, that does reset to “0” and the Pink does disappear.
But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
GD
Guy Diehl web: www.guydiehl.com | email: [email protected]

Question: Need help with overcoming the following message: "Nothing was imported.

Need help with overcoming the following message: “Nothing was imported. The file(s) or folder(s) selection to import did not contain any supported file types, or the files are already in this catalogue”.
The photos being scanned are old film shots. They have NOT been previously scanned. I am using Photoshop Elements 9 software.
QUESTION: how do I override this STOP and or circumvent the photo comparison option????
Thanks for the help. Bob K --- [email protected]

Are you scanning as jpeg, tiff or some other format?
Are you using continuous numbering for files names as by definition scanned files have no exif data.

Ok so my i need help with my iphone 4s... i have about $5.00 of credits left of the itunes card i got and i decided to get a show and it says i need to verify my credit card, why doesnt it just use the credits i have? its under 5 bucks? help me please

ok so my i need help with my iphone 4s... i have about $5.00 of credits left of the itunes card i got and i decided to get a show and it says i need to verify my credit card, why doesnt it just use the credits i have? its under 5 bucks? help me please

You have to do it here for help
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

HT5699 The country I am living in is not on the Apple Contact Support list and I need help with my security questions.

I am currently living in Tunisia but it's not on the Apple Contact Support list. I need help with my security questions which I cannot remember the answers. There is no link to send a reset email. What do I do?

Click here and ask the iTunes Store staff for assistance.
(114040)

Need help with question about indesign 2014...

Similar Messages

Maybe you are looking for