Need help with raw support for Nikon D7100

Hello,
So i found the update that will allow me to get my raw files onto my mac but it will not let me download anything!
It says i need aperture or i photo. I have the most up to date iphoto and it still will not let me download the update.
Sorry if this is stupid i am just getting so frustrated with this whole thing! I bought my new Nikon and i have to keep all my pictures on the camera!
Some one please help me!
I am not very good with my mac yet and i need all the help and explanation i can get!
Thank you so much!

Hi KelseyyBevann,
Welcome to the Support Communities!
Is this the update that you tried to download?
Digital Camera RAW Compatibility Update 4.06
http://support.apple.com/kb/DL1656
What version of the operating system do you have?
When you attach your camera do you see it in Finder?
If so, you can import the photos into iPhoto this way:
iPhoto '11: Import photos from your hard disk or other computers
http://support.apple.com/kb/PH2357
Judy

Similar Messages

RAW support for Nikon D7100

When will Apple update RAW file support for Nikon D7100?

Just tried the exiftool workaround hinted by cakos and I'm happy to report I can now see the photo taken with Nikon D7100 on the screen. However, my versions of Photoshop (CS5) and Lightroom (3) couldn't be tricked into believing the picture was taken with a D5200 and refused to open it. The same happened in Apple Preview running on Snow Leopard.
But Preview on Mountain Lion did a better job and opened my .NEF file without any problems so I exported it to .tif and that made it possible to load it in the Adobe programs.
Oh, and this is the command I've used to override the camera model entry in the RAW file:
$ exiftool -Model="NIKON D5200" DSC0001.NEF

Lightroom 4 support for Nikon d7100

What am I to do with my photos if Lightroom 4.4 does not include support for Nikon d7100?

After a few false starts, I've successfully brought RAW files into Lightroom 4, by using a method that basically tells Lightroom that the camera is a Nikon D5200, which apparently has the same DX 24 megapixel format.
Check out the site below:
http://www.thephotoforum.com/forum/graphics-programs-photo-gallery/320908-how-open-d7100-r aw-files-lightroom-4-a.html
1. Download a free copy of exiftool and install
2. Copy your NEF files to a directory specifically for changing the file metadata to say D5200. Only put those NEF files in this directory, nothing else.
3. Run the program as described in the link above, specifying the exact location of the directory with your copied NEF files. Very important: for it to work if there are any spaces in your directory name, you must put quotation marks on either side of the directory location or it won't find the directory. I also found that all details, including exact spacing, is important in the command. So after "Nikon D5200" have a space before -ext. (Feels like being back to the C prompt days!)
If it finds your directory and it runs properly, the original .NEF files are renamed .NEF_original, and the new files that should work in Lightroom are named .NEF. My guess is that if the command doesn't run properly you could rename your original files back. But it's much safer and quicker to copy the files from your memory card to your hard drive, and if anything doesn't work right or creates unreadable files, just delete the files in the new directory and try again with new original copies.
I did this on a Mac, but should work as well on a PC. For Mac users who haven't used it, Terminal is an app that comes with the Mac. Just find the terminal app, open it, and put in the command line shown in the link, referencing the directory you've put the files in in quotes.
Good luck!

Aperture support for Nikon D7100?

Lightroom now has support for Nikon D7100. Does anybody have any suggestions when Aperture will provid support?

There has always been, and likely always will be a bit of leap frog, one upsmanship with the timetables for competing developers when adding RAW support for new cameras. None of the developers who offer solutions for RAW processing have the market cornered in this respect.
While I too have concerns ... it should be pointed out that the view across the fence is not as attractive as one might think.
On Oct. 23, 2012, Apple added RAW support and tether support for the Nikon D600 ... while Lightroom did add RAW support for the D600 about the same time, Adobe has yet to offer tether support for the D600. In fact, Lightroom only supports a small select few cameras for tethering.
Of course this may not be of interest for Aperture users who do not rely upon the tethering feature ... I simply point out this situation in order to illustrate that Lightroom is not a panacea of perfection ... and don't get me started on how horrid the Lightroom Slideshow and Book modules are compared to what Aperture offers.
Likely, Apple will offer an update sooner rather than later.

When will the RAW support for Nikon DF be release?

Anyone know when they will release the RAW support for Nikon DF?

Anyone who knows that, would not be allowed to post this information here. Only the Apple developers could tell you, and they never announce this kind of information in advance, sorry.

I still need help with the Dictionary for my Nokia...

I still need help with the Dictionary for my Nokia 6680...
Here's the error message I get when trying to open dictionary...
"Dictionary word information missing. Install word database."
Can someone please provide me a link the where I could download this dictionary for free?
Thanks!
DON'T HIT KIDS... THEY HAVE GUNS NOW.

oops, im sorry, i didnt realised i've already submitted it
DON'T HIT KIDS... THEY HAVE GUNS NOW.

Need help with raw fine tuning version

I am a new user of the aperture 2. I just activated my copy of aperture by the trial key provided by apple.
Everything looked nice except when I imported some raw images of Fujifilm S5PRO, the raw decoder available are only 1.0 and 1.1. There are no option for 2.0. Also the recovery function under exposure is disabled.
Need help with this, how could I solve and get back to a 2.0 decoder?
Aperture Version is 2.01
MAC OSX 1.5.2

Hi KelseyyBevann,
Welcome to the Support Communities!
Is this the update that you tried to download?
Digital Camera RAW Compatibility Update 4.06
http://support.apple.com/kb/DL1656
What version of the operating system do you have?
When you attach your camera do you see it in Finder?
If so, you can import the photos into iPhoto this way:
iPhoto '11: Import photos from your hard disk or other computers
http://support.apple.com/kb/PH2357
Judy

CS5 Raw Support for Nikon D800 not function well after Time Machine restore

Hi.
I am using the CS5 with RAW support version for D800 without any problem before.
I am not very sure the RAW support version that I use in the past.
But after I restore my iMac with the latest time machine file.
CS5 cannot open the RAW file for D800 anymore, I try to install the latest RAW file version 6.7 for CS5, but when I click to check the RAW support version in CS5, it keeps showing version 6.6, any idea how to solv
Thank you very much~

You need ACR (Adobe Camera Raw) 6.7 to open D800 files.
Download here:
Windows - http://www.adobe.com/support/downloads/detail.jsp?ftpID=5371
Mac - http://www.adobe.com/support/downloads/detail.jsp?ftpID=5370
-ST

Need help with calculator project for an assignment...

Hi all, I please need help with my calculator project that I have to do for an assignment.
Here is the project's specifications that I need to do"
"""Create a console calculator applicaion that:
* Takes one command line argument: your name and surname. When the
program starts, display the date and time with a welcome message for the
user.
* Display all the available options to the user. Your calculator must include
the arithmetic operations as well as at least five scientific operations of the
Math class.
-Your program must also have the ability to round a number and
truncate it.
-When you multiply by 2, you should not use the '*' operator to perform the
operation.
-Your program must also be able to reverse the sign of a number.
* Include sufficient error checking in your program to ensure that the user
only enters valid input. Make use of the String; Character, and other
wrapper classes to help you.
* Your program must be able to do conversions between decimal, octal and
hex numbers.
* Make use of a menu. You should give the user the option to end the
program when entering a certain option.
* When the program exits, display a message for the user, stating the
current time, and calculate and display how long the user used your
program.
* Make use of helper classes where possible.
* Use the SDK to run your program."""
When the program starts, it asks the user for his/her name and surname. I got the program to ask the user again and again for his/her name and surname
when he/she doesn't insert anything or just press 'enter', but if the user enters a number for the name and surname part, the program continues.
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??
Here is the programs code that I've written so far:
{code}
import java.io.*;
import java.util.*;
import java.text.*;
public class Project {
     private static String nameSurname = "";
     private static String num1 = null;
     private static String num2 = null;
     private static String choice1 = null;
     private static double answer = 0;
     private static String more;
     public double Add() {
          answer = (Double.parseDouble(num1) + Double.parseDouble(num2));
          return answer;
     public double Subtract() {
          answer = (Double.parseDouble(num1) - Double.parseDouble(num2));
          return answer;
     public double Multiply() {
          answer = (Double.parseDouble(num1) * Double.parseDouble(num2));
          return answer;
     public double Divide() {
          answer = (Double.parseDouble(num1) / Double.parseDouble(num2));
          return answer;
     public double Modulus() {
          answer = (Double.parseDouble(num1) % Double.parseDouble(num2));
          return answer;
     public double maximumValue() {
          answer = (Math.max(Double.parseDouble(num1), Double.parseDouble(num2)));
          return answer;
     public double minimumValue() {
          answer = (Math.min(Double.parseDouble(num1), Double.parseDouble(num2)));
          return answer;
     public double absoluteNumber1() {
          answer = (Math.abs(Double.parseDouble(num1)));
          return answer;
     public double absoluteNumber2() {
          answer = (Math.abs(Double.parseDouble(num2)));
          return answer;
     public double Squareroot1() {
          answer = (Math.sqrt(Double.parseDouble(num1)));
          return answer;
     public double Squareroot2() {
          answer = (Math.sqrt(Double.parseDouble(num2)));
          return answer;
     public static String octalEquivalent1() {
          int iNum1 = Integer.parseInt(num1);
String octal1 = Integer.toOctalString(iNum1);
return octal1;
     public static String octalEquivalent2() {
          int iNum2 = Integer.parseInt(num2);
          String octal2 = Integer.toOctalString(iNum2);
          return octal2;
     public static String hexadecimalEquivalent1() {
          int iNum1 = Integer.parseInt(num1);
          String hex1 = Integer.toHexString(iNum1);
          return hex1;
     public static String hexadecimalEquivalent2() {
          int iNum2 = Integer.parseInt(num2);
          String hex2 = Integer.toHexString(iNum2);
          return hex2;
     public double Round1() {
          answer = Math.round(Double.parseDouble(num1));
          return answer;
     public double Round2() {
          answer = Math.round(Double.parseDouble(num2));
          return answer;
          SimpleDateFormat format1 = new SimpleDateFormat("EEEE, dd MMMM yyyy");
     Date now = new Date();
     SimpleDateFormat format2 = new SimpleDateFormat("hh:mm a");
     static Date timeIn = new Date();
     public static long programRuntime() {
          Date timeInD = timeIn;
          long timeOutD = System.currentTimeMillis();
          long msec = timeOutD - timeInD.getTime();
          float timeHours = msec / 1000;
               return (long) timeHours;
     DecimalFormat decimals = new DecimalFormat("#0.00");
     public String insertNameAndSurname() throws IOException{
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    while (nameSurname == null || nameSurname.length() == 0) {
                         for (int i = 0; i < nameSurname.length(); i++) {
                         if ((nameSurname.charAt(i) > 'a') && (nameSurname.charAt(i) < 'Z')){
                                   inputCorrect = true;
                    else{
                    inputCorrect = false;
                    break;
                    try {
                         BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("Please enter your name and surname: ");
                         nameSurname = inStream.readLine();
                         inputCorrect = true;
                    }catch (IOException ex) {
                         System.out.println("You did not enter your name and surname, " + nameSurname + " is not a name, please enter your name and surname :");
                         inputCorrect = false;
                    System.out.println("\nA warm welcome " + nameSurname + " ,todays date is: " + format1.format(now));
                    System.out.println("and the time is now exactly " + format2.format(timeIn) + ".");
                    return nameSurname;
          public String inputNumber1() throws IOException {
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader br = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("\nPlease enter a number you want to do a calculation with and hit <ENTER>: ");
                         num1 = br.readLine();
                         double number1 = Double.parseDouble(num1);
                         System.out.println("\nThe number you have entered is: " + number1);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("\nYou did not enter a valid number: " + "\""+ num1 + "\" is not a number!!");
                         inputCorrect = false;
                    return num1;
     public String calculatorChoice() throws IOException {
          System.out.println("Please select an option of what you would like to do with this number from the menu below and hit <ENTER>: ");
          System.out.println("\n*********************************************");
          System.out.println("---------------------------------------------");
          System.out.println("Please select an option from the list below: ");
          System.out.println("---------------------------------------------");
          System.out.println("1 - Add");
          System.out.println("2 - Subtract");
          System.out.println("3 - Multiply");
          System.out.println("4 - Divide (remainder included)");
          System.out.println("5 - Maximum and minimum value of two numbers");
          System.out.println("6 - Squareroot");
          System.out.println("7 - Absolute value of numbers");
          System.out.println("8 - Octal and Hexadecimal equivalent of numbers");
          System.out.println("9 - Round numbers");
          System.out.println("0 - Exit program");
          System.out.println("**********************************************");
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("Please enter your option and hit <ENTER>: ");
                         choice1 = inStream.readLine();
                         int c1 = Integer.parseInt(choice1);
                         System.out.println("\nYou have entered choice number: " + c1);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("You did not enter a valid choice number: " + "\""+ choice1 + "\" is not in the list!!");
                         inputCorrect = false;
                    return choice1;
     public String inputNumber2() throws IOException {
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader br2 = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("\nPlease enter another number you want to do the calculation with and hit <ENTER>: ");
                         num2 = br2.readLine();
                         double n2 = Double.parseDouble(num2);
                         System.out.println("\nThe second number you have entered is: " + n2);
                         System.out.println("\nYour numbers are: " + num1 + " and " + num2);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("You did not enter a valid number: " + "\""+ num2 + "\" is not a number!!");
                         inputCorrect = false;
                    return num2;
     public int Calculator() {
          int choice2 = (int) Double.parseDouble(choice1);
          switch (choice2) {
                    case 1 :
                         Add();
                         System.out.print("The answer of " + num1 + " + " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 2 :
                         Subtract();
                         System.out.print("The answer of " + num1 + " - " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 3 :
                         Multiply();
                         System.out.print("The answer of " + num1 + " * " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 4 :
                         Divide();
                         System.out.print("The answer of " + num1 + " / " + num2 + " is: " + decimals.format(answer));
                         Modulus();
                         System.out.print(" and the remainder is " + decimals.format(answer));
                         break;
                    case 5 :
                         maximumValue();
                         System.out.println("The maximum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
                         minimumValue();
                         System.out.println("The minimum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 6 :
                         Squareroot1();
                         System.out.println("The squareroot of value " + num1 + " is: " + decimals.format(answer));
                         Squareroot2();
                         System.out.println("The squareroot of value " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 7 :
                         absoluteNumber1();
                         System.out.println("The absolute number of " + num1 + " is: " + decimals.format(answer));
                         absoluteNumber2();
                         System.out.println("The absolute number of " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 8 :
                         octalEquivalent1();
                         System.out.println("The octal equivalent of " + num1 + " is: " + octalEquivalent1());
                         octalEquivalent2();
                         System.out.println("The octal equivalent of " + num2 + " is: " + octalEquivalent2());
                         hexadecimalEquivalent1();
                         System.out.println("\nThe hexadecimal equivalent of " + num1 + " is: " + hexadecimalEquivalent1());
                         hexadecimalEquivalent2();
                         System.out.println("The hexadecimal equivalent of " + num2 + " is: " + hexadecimalEquivalent2());
                         break;
                    case 9 :
                         Round1();
                         System.out.println("The rounded number of " + num1 + " is: " + decimals.format(answer));
                         Round2();
                         System.out.println("The rounded number of " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 0 :
                         if (choice2 == 0) {
                              System.exit(1);
                         break;
               return choice2;
          public String anotherCalculation() throws IOException {
               boolean inputCorrect = false;
               while (inputCorrect == false) {
                         try {
                              BufferedReader br3 = new BufferedReader (new InputStreamReader(System.in));
                              System.out.print("\nWould you like to do another calculation? Y/N ");
                              more = br3.readLine();
                              String s1 = "y";
                              String s2 = "Y";
                              if (more.equals(s1) || more.equals(s2)) {
                                   inputCorrect = true;
                                   while (inputCorrect = true){
                                        inputNumber1();
                                        System.out.println("");
                                        calculatorChoice();
                                        System.out.println("");
                                        inputNumber2();
                                        System.out.println("");
                                        Calculator();
                                        System.out.println("");
                                        anotherCalculation();
                                        System.out.println("");
                                        inputCorrect = true;
                              } else {
                                   System.out.println("\n" + nameSurname + " thank you for using this program, you have used this program for: " + decimals.format(programRuntime()) + " seconds");
                                   System.out.println("the program will now exit, Goodbye.");
                                   System.exit(0);
                         } catch (IOException ex){
                              System.out.println("You did not enter a valid answer: " + "\""+ more + "\" is not in the list!!");
                              inputCorrect = false;
          return more;
     public static void main(String[] args) throws IOException {
          Project p1 = new Project();
          p1.insertNameAndSurname();
          System.out.println("");
          p1.inputNumber1();
          System.out.println("");
          p1.calculatorChoice();
          System.out.println("");
          p1.inputNumber2();
          System.out.println("");
          p1.Calculator();
               System.out.println("");
               p1.anotherCalculation();
               System.out.println("");
{code}
*Can you please run my code for yourself and have a look at how this program is constructed*
*and give me ANY feedback on how I can better this code(program) or if I've done anything wrong from your point of view.*
Your help will be much appreciated.
Thanks in advance

Smirre wrote:
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??You cannot restrict the user. It is a sad fact in programming that the worst bug always sits in front of the Computer.
What you could do is checking the input string for numbers. If it contains numbers, just reprompt for the Name.
AND you might want to ask yourself why the heck a calculator needs to know the users Name.

RAW Support for Nikon D810?

Has anyone heard about when Apple plans to provide RAW support for the new Nikon D810 Camera?

Wish I knew as well--couldn't come fast enough for myself or clients. In the meantime I've added 1 extra step to workflow by first converting D810 RAWs to DNG using Adobe DNG converter--leaving original RAW embedded. Aperture can read the converted DNG file.

Need help with raw files

I have reinstalled and updated CS5 but I am unable to open camera raw files for my Canon Rebel T4i. I get the following message:
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.

Camera Raw is an Adobe plugin for Photoshop, Photoshop Elements and Lightroom which processes Raw files. Camera Raw must be updated for every new make and model of camera which enters the market. Thus Camera Raw is frequently updated but not all versions of Camera Raw are compatible with all versions of Photoshop.
See http://blogs.adobe.com/crawlspace/2011/03/why-doesnt-my-version-of-photoshop-or-lightroom- support-my-camera.html
According to http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
the Rebel T4i was first supported in Camera Raw 7.1.
Camera Raw 7+ is only compatible with CS6 and higher.
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Your choices:
Upgrade to CS6
Join the Cloud
Convert all your T4i Raw files to DNGs using Adobe's free DNG converter
http://www.adobe.com/products/photoshop/extend.displayTab2.html
Then edit the DNGs in your existing CS5.

RAW support for Nikon D5000

I just got a Nikon D5000 but PSE 7.0 cannot load the RAW images.
I saw that ACR 5.4 with D5000 support is now available but it does not have the install scripts for PSE 7.
Has anyone been able to manually install the data files for the D5000?

Thanks.
I went through the ACR 5.4 zip file and found the correct file (name=1003, size = 10.8 mb). copied that into the PSE 7.0 directory C:\Program Files\Adobe\Photoshop Elements 7.0\Plug-Ins\File Formats and renamed it Camera Raw.8bi
PSE 7.0 now works perfectly with my Nikon D5000 raw files.
Wilf Weidmark
< personal info removed by forum host >

HT3825 Apple needs to add system support for Nikon D4 NEF Previews... currently only D800.

Apple has added support for the Nikon D800 to 10.6 but not the Nikon D4? OSX.6 needs to be updated to be able to view thumbnails and previews to raw files from the Nikon D4. The only update that apple has released only affects iPhoto, not the system.

AppleTV is Steve Job's hobby product?
Perhaps AppleTV has increased sales on the iTunes store, but I wonder if the AppleTV itself has made any money for the company. For all we know, Apple may be losing money on every production and sale of the product, just like MS and Sony have for their consoles. I think the AppleTV is a great idea, but it is too limiting for it to be universally accepted. In fact, the AppleTV should be the universal player of set-top boxes. Apple, I guess, is not interested in the video server market.

Support for Nikon D7100 in Elements 10

Elements 10 will not open NEF files from my new Nikon D7100. It opens those same type of files from the D7000 and the D800.Does this mean I will need E 11?
Message title was edited by: Brett N

WIN : http://www.adobe.com/support/downloads/detail.jsp?ftpID=5569
MAC : http://www.adobe.com/support/downloads/detail.jsp?ftpID=5568

Need help with SQL retrieval for previous month till current date

Hi ,
Need help generating statistics from previous month from date of enquiry till current date of enquiry.
and have to display it according to date.
Date of enquiry : 03/02/2012
Application Type| 01/01/2012 | 02/01/2012 | 03/01/2012 |...... | 31/01/2012 | 01/02/2012 | 02/02/2012 | 03/02/2012 |
sample1 20 30 40
sample 2 40 40 50
sample 3 50 30 30
Hope you guys can help me with this.
Regards

Hi,
932472 wrote:
Scenario
1)If i run the query at 12 pm on 03/2/2012. the result i will have to display till the current day.
2)displaying the count of the application made based on the date.
Application type 01012012 | 02012012 | 03012012 | ..... 01022012| 02022012|03022012
sample 1 30 40 50 44 30
sample 2 35 45 55
sample 3 36 45 55Explain how you get those results from the sample data you posted.
It would help a lot if you posted the results in \ tags, as described in the forum FAQ. {message{id=9360002}
SELECT     application_type as Application_type
,     COUNT (CASE WHEN created_dt = sysdate-3 THEN 1 END)     AS 01012012 (should be getting dynamically)
,     COUNT (CASE WHEN created_dt = sysdate-4 THEN 1 END)     AS 02022012
,     COUNT (CASE WHEN created_dt = sysdate-5 THEN 1 END)     AS 03022012
, COUNT (CASE WHEN created_dt = sysdate-6 THEN 1 END)     AS 04022012
FROM     table_1
GROUP BY application_type
ORDER BY     application_typeThat's the bais idea.
You can simplify it a little by factoring out the date differences:WITH got_d     AS
     SELECT     qty
     ,     TRUNC ( dt
          - ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
                    , -1
          ) AS d
     FROM table1
     WHERE     dt     >= ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
                    , -1
     AND dt     < TRUNC (SYSDATE) + 1
SELECT     SUM (CASE WHEN d = 1 THEN qty END)     AS day_1
,     SUM (CASE WHEN d = 2 THEN qty END)     AS day_2
,     SUM (CASE WHEN d = 62 THEN qty END)     AS day_62
FROM     got_d
See the links I mentioned earlier for getting exactly the right number of columns, and dynamic column aliases.

Need help with raw support for Nikon D7100

Similar Messages

Maybe you are looking for