Need help with recomendations on licenses for Server 2012 Std R2
I have a client who wants to purchase a server from me. I can buy the parts and assemble the system no problem. But I'm a newbie when it comes to user CALs or device CALs. The company will be having about 50 computers connecting to it. I'm assuming they'll
just be using the standard user/password domain login.
What else would I need to purchase in addition to the OS?
What kind of features does the vanilla server OS give you? Can 50 computers connect to just the OS alone? I've seen places that have a 1 user CAL for $36. Do I need 50 of these? If I don't purchase them right away, could my client still connect their computers
to the server?
mr.t
Hello,
Licensing Windows Server 2012 comes in four different flavours foundation, essentials, standard and datacenter.
Your client is wanting connect 50 users which really does rule out two of those flavours.
Essentials is ruled out because it is an OEM operating system and only supports up to 15 users and has limited functionality
Foundation is rules out because it only supports up to 25 users and has limited functionality
This leaves us with two Windows Server 2012 flavours you can purchase Standard or Datacenter. They both have exactly the same functionality; the difference is the virtualisation
rights. With standard one license covers two physical processors and supports two virtual machines, if you need more virtual machines then you would have to buy another standard license and giving the right to four virtual machines for example. Then
for datacenter license covers two physical processors and covers you for an unlimited amount of virtual operating systems.
To make this hopefully easier:
1 x standard license covers = 2 x physical processors – 2 x virtual operating systems environments
1x datacenter license covers = 2 x physical processors – unlimited virtual operating environments
Both Standard and Datacenter come with Full functionality
Meaning standard licensing is really for no or very limited virtual environments, then if you are looking in to a virtual environment Datacenter is the way to go.
On regards to CALS are required for every user or device accessing the server. They/you will need to decide whether or not you go for Device or user CALs. User CAL
is more expensive but it gives companies a lot more flexible if the users are running more than one device for example if they support a bring your own device strategy. Although there are different types of CALS depending on what the customer will be
looking to use and access.
Also can your user still connect to the server: technically speaking yes, CALS are not like license keys you cannot activate them it is effectively a piece of
paper to say you have purchased X amount CALS and your compliant to allow your users to connect. So you can connect with out purchasing but you will not be compliant from a licensing standpoint.
Hope this helps to some degree!
Cheers,
Harry
Similar Messages
-
I am still using CS3. A while back I received an error: "Licensing for this product has stopped working" for my CS3 programs. I used the recovery program suggested by Adobe and was able to get Illustrator, Flash and Dreamweaver to work, but I still can't open Photoshop or In Design. I went back to the Adobe site and did every other trick they suggested to fix the error, but nothing has worked.
I then tried to uninstall photoshop from my CS3 suite (so I could reinstall) but got a JavaScript Alert: "Critical errors were found in set up. Please see set up log for file details." Seeing as I am not the best with the behind the scenes technical stuff, I have no idea what this means or where the set up log even is. Any help anyone can provide?
I have had CS3 installed on my computer for over a year. I started having problems about 4 months ago.I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?
-
I think I need help with driver (software) settings for D110a
I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05) -
Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.
You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.
-
I need help with downgradeing my ios for my ipod touch 4th gen
i need help with downgradeing my ios for my ipod touch 4th gen
As has alwys been the case, you cannot go back.
Sorry -
[solved]Need help with a bash script for MOC conky artwork.
I need some help with a bash script for displaying artwork from MOC.
Music folders have a file called 'front.jpg' in them, so I need to pull the current directory from MOCP and then display the 'front.jpg' file in conky.
mocp -Q %file
gives me the current file playing, but I need the directory (perhaps some way to use only everything after the last '/'?)
A point in the right direction would be appreciated.
thanks, d
Last edited by dgz (2013-08-29 21:24:28)Xyne wrote:
You should also quote the variables and output in double quotes to make the code robust, e.g.
filename="$(mocp -Q %file)"
dirname="${filename%/*}"
cp "$dirname"/front.jpg ~/backup/art.jpg
Without the quotes, whitespace will break the code. Even if you don't expect whitespace in any of the paths, it's still good coding practice to include the quotes imo.
thanks for the tip.
here it is, anyhow:
#!/bin/bash
filename=$(mocp -Q %file)
dirname=${filename%/*}
cp ${dirname}/front.jpg ~/backup/art.jpg
then in conky:
$alignr${execi 30 ~/bin/artc}${image ~/backup/art.jpg -s 100x100 -p -3,60}
thanks for the help.
Last edited by dgz (2013-08-29 21:26:32) -
Hi i need help with getting my homework for school
im in a nine week class that ends tommorw and need help go\etting my program working properly these are the requirements ofr the assignments:
Modify the Inventory Program by adding a button to the GUI that allows the user to move
to the first item, the previous item, the next item, and the last item in the inventory. If the
first item is displayed and the user clicks on the Previous button, the last item should
display. If the last item is displayed and the user clicks on the Next button, the first item
should display.
· Add a company logo to the GUI using Java graphics classes.
Modify the Inventory Program to include an Add button, a Delete button, and a Modifybutton on the GUI. These buttons should allow the user to perform the corresponding actions on the item name, the number of units in stock, and the price of each unit. An item added to the inventory should have an item number one more than the previous last item. Add a Save button to the GUI that saves the inventory to a C:\data\inventory.dat file. Use exception handling to create the directory and file if necessary. Add a search button to the GUI that allows the user to search for an item in the inventory by the product name. If the product is not found, the GUI should display an appropriate message. If the product is found, the GUI should display that products information in the GUI. Post final .class and .java files as an attachment.
this is what i have there are three java files im puttong in here
first is the panel frame
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.*;
import java.text.NumberFormat;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
private JPanel buttonJPanel; // panel to hold buttons
private JButton buttons[]; // array of buttons
private JLabel label1; // JLabel iventory number
private JLabel label2; // JLabel product name
private JLabel label3; // JLabel product price
private JLabel label4; // JLabel product in stock
private String p_ProductName; // private variable for the employee name.
private int p_UnitCount; // private variable for the hours worked.
private double p_UnitPrice; // private variable for the hourly wage.
private int p_ItemNumber; // private inventory number
//create inventory object
Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
label1.setToolTipText( "This is Inventory number" );
add( label1 ); // add label1 to JFrame
label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
label2.setToolTipText( "This is Product Name" );
add( label2 ); // add label1 to JFrame
label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
label3.setToolTipText( "This is product Price");
add( label3 ); // add label1 to JFrame
label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
label4.setToolTipText( "This is Quanity in stock: " );
add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
String names[] = { "First", "Previous", "Next", "Last" };
JButton buttons[] = new JButton[ names.length ];
// create and add buttons
for ( int count = 0; count < buttons.length; count++ )
buttons[ count ] = new JButton( names[ count ] );
buttonJPanel.add( buttons[ count ] ); // add button to panel
} // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
URL url = this.getClass().getResource("book103.gif");
Image img = Toolkit.getDefaultToolkit().getImage(url);
// scale the image so that it'll fit in the GUI
Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
// create a JLabel with the image as the label's Icon
Icon logoIcon = new ImageIcon(scaledImage);
JLabel companyLogoLabel = new JLabel(logoIcon);
companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
// add the logo to the GUI
getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFramethis is the original part again with the code tag added
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.;
import java.text.NumberFormat;
import javax.swing.;
import java.awt.;
import java.awt.event.;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
private JPanel buttonJPanel; // panel to hold buttons
private JButton buttons[]; // array of buttons
private JLabel label1; // JLabel iventory number
private JLabel label2; // JLabel product name
private JLabel label3; // JLabel product price
private JLabel label4; // JLabel product in stock
private String p_ProductName; // private variable for the employee name.
private int p_UnitCount; // private variable for the hours worked.
private double p_UnitPrice; // private variable for the hourly wage.
private int p_ItemNumber; // private inventory number
//create inventory object
Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
label1.setToolTipText( "This is Inventory number" );
add( label1 ); // add label1 to JFrame
label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
label2.setToolTipText( "This is Product Name" );
add( label2 ); // add label1 to JFrame
label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
label3.setToolTipText( "This is product Price");
add( label3 ); // add label1 to JFrame
label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
label4.setToolTipText( "This is Quanity in stock: " );
add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
String names[] = { "First", "Previous", "Next", "Last" };
JButton buttons[] = new JButton[ names.length ];
// create and add buttons
for ( int count = 0; count < buttons.length; count++ )
buttons[ count ] = new JButton( names[ count ] );
buttonJPanel.add( buttons[ count ] ); // add button to panel
} // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
URL url = this.getClass().getResource("book103.gif");
Image img = Toolkit.getDefaultToolkit().getImage(url);
// scale the image so that it'll fit in the GUI
Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
// create a JLabel with the image as the label's Icon
Icon logoIcon = new ImageIcon(scaledImage);
JLabel companyLogoLabel = new JLabel(logoIcon);
companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
// add the logo to the GUI
getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFrame -
Need help with output type EDI for ERS
All,
I want to be able to run and ERS settlement and have the invoices created sent via EDI/XML to the supplier. I have several questions on the set up.
1) I have output type ERS6 which is defined as ERS EDI. I assume because it does not start with Z* this is SAP standard, so I shouldn't have to modify any of this.
2) I've added my supplier to this output type.
3) I assume I need to create a partner profile for this supplier? If so can someone tell me the message type to use?
Is there any set up I'm missing in this process? I've executed ERS but do not get an idoc and I'm fairly certain it's because I haven't done the partner profile set-up.
Thanks for your help.
SandraHi,
You don't have to modify thise setup unless you have any customized requirement.
You are missing partner profile setup.Carry out the setup and run MRRL tcode to create the idocs
Enter the following values using tcode WE20.
Field Value
Message type GSVERF
Partner type LI (vendor)
Partner function LF (vendor)
Port SUBSYSTEM ( Port to your middleware)
Output mode such as Collect IDocs
Basic type GSVERF01
Application MR
Output type ERS6 or the type you have defined
Regards,
Karuna -
Need help with date range searches for Table Sources in SES
Hi all,
I need help, please. I am trying to satisfy a Level 1 client requirement for the ability to search for records in crawled table sources by a date and/or date range. I have performed the following steps, and did not get accurate results from Advanced searching for date. Please help me understand what I am doing wrong, and/or if there is a way to define a date search attribute without creating a LOV for a date column. (My tables have 500,00 rows.)
I am using SES 10.1.8.3 on Windows 32.
My Oracle 10g Spatial Table is called REPORTS and this table has the following columns:
TRACKNUM Varchar2
TITLE Varchar2
SUMMARY CLOB
SYMBOLCODE Varchar2
Timestamp Date
OBSDATE Date
GEOM SDO_GEOMETRY
I set up the REPORTS table source in SES, using TRACKNUM as the Primary Key (unique and not null), and SUMMARY as the CONTENT Column. In the Table Column Mappings I defined TITLE as String and TITLE.
Under Global Settings > Search Attributes I defined a new Search Attribute (type Date) called DATE OCCURRED (DD-MON-YY).
Went back to REPORTS source previously defined and added a new Table Column Mapping - mapping OBSDATE to the newly defined DATE OCCURRED (DD-MON-YY) search attribute.
I then modified the Schedule for the REPORTS source Crawler Policy to “Process All Documents”.
Schedule crawls and indexes entire REPORTS table.
In SES Advanced Search page, I enter my search keyword, select Specific Source Group as REPORTS, select All Match, and used the pick list to select the DATE OCCURRED (DD-MON-YY) Attribute Name, operator of Greater than equal, and entered the Value 01-JAN-07. Then the second attribute name of DATE_OCCURRED (DD-MON-YY), less than equals, 10-JAN-07.
Search results gave me 38,000 documents, and the first 25 I looked at had dates NOT within the 01-JAN-07 / 10-JAN-07 range. (e.g. OBSDATE= 10-MAR-07, 22-SEP-07, 02-FEB-08, etc.)
And, none of the results I opened had ANY dates within the SUMMARY CLOB…in case that’s what was being found in the search.
Can someone help me figure out how to allow my client to search for specific dated records in a db table using a single column for the date? This is a major requirement and they are anxiously awaiting my solution.
Thanks very much, in advance….raford,
Thanks very much for your reply. However, from what I've read in the SES Admin Document is that (I think) the date format DD/MM/YYYY pertains only to searches on "file system" sources (e.g. Word, Excel, Powerpoint, PDF, etc.). We have 3 file system sources among our 25 total sources. The remaining 22 sources are all TABLE or DATABASE sources. The DBA here has done a great job getting the data standardized using the typical/default Oracle DATE type format in our TABLE sources (DD-MON-YY). Our tables have anywhere from 1500 rows to 2 million rows.
I tested your theory that the dates we are entering are being changed to Strings behind the scenes and on the Advanced Page, searched for results using OBSDATE equals 01/02/2007 in an attempt to find data that I know for certain to be in the mapped OBSDATE table column as 01-FEB-07. My result set contained data that had an OBSDATE of 03-MAR-07 and none containing 01-FEB-07.
Here is the big issue...in order for my client to fulfill his primary mission, one of the top 5 requirements is that he/she be able to find specific table rows that are contain a specific date or range of dates.
thanks very much! -
I have a product key for Windows server 2012 Standard ROK edition and need to downgrade it to windows server 2008 Enterprise edition.
Hi,
Based on my research,
Windows Server 2012
Standard edition
can be downgrade to any prior version of Standard and Enterprise or Essentials editions.
For more detailed information, please refer to the links below:
Understanding
downgrade rights
WS2012_Licensing-Pricing_FAQ
Best regards,
Susie -
I need help with proper DNS setup for 10.5.8 Server
I'm administering a 10.5.8 server that I sold and setup about a year ago. I'm experiencing issues with getting iCal server to be happy. All of the clients are running 10.5.8, but I'm running 10.6.1. I've heard from others that connecting iCal in 10.6 to a 10.5 iCal Server should be no problem.
I'm beginning to think that I have DNS issues. Probably because I'm not and never have been 100% certain how to set it up completely correctly. I used to be able to get Kerberos tickets, but now I can't. With the new "Ticket Viewer" in 10.6, it asks for two bits of information. First is "Identity" where I'm guessing I should put [email protected] and then password. When I do this I get an alert dialog that says "Kerberos Error -- cannot resolve network address for KDC in realm example.com"
The server is a Mac Pro tower with two Ethernet ports. En2 is connected directly to the Internet and has a static IP with a domain name assigned to it. We'll call it "example.com" for the purposes of the discussion. The En1 is connected to the network switch and has a static LAN IP of 192.168.1.250. All clients inside and outside are able to reach the server via domain name for WWW & AFP, no problem.
nslookup on the static IP address returns "example.com" and nslookup on "example.com" returns the correct static IP address. Open Directory is running and happy including Kerberos. The LDAP search base is "dc=example,dc=com". The LDAP search base is a concept I haven't quite grasped, so I'm just going to assume it's correct.
The domain name is hosted outside by a service provider that forwards all "example.com" requests to the server with the exception of mail.
In DNS, I have three "sections" that look like this:
Name Type Value
1.168.192.in-addr.arpa. Reverse Zone -
192.168.1.250 Reverse Mapping example.com.
000.000.00.in-addr.arpa. Reverse Zone -
000.000.000.000 Reverse Mapping example.com.
com. Primary Zone -
mail.example.com. Alias mail.our-email-isp.com.
example.com. Machine Multiple values
www.example.com. Machine Multiple values
NOTE: the zeros aren't actually zeros, they are the static IP assigned to the server/domain
When I select the top element "1.168.192.in-addr.arpa." down below "Allows zone transfer" is NOT checked. Nameservers shows the zone as "1.168.192.in-addr.arpa." and the Nameserver Hostname as "ns.example.com."
When I select the next line down "192.168.1.250", Resolve 192.168.1.250 to: example.com.
When I select the "000.000.00.in-addr.arpa." element, it has the same settings -- nameservers "000.000.00.in-addr.arpa." and "ns.example.com."
When I select the next line down (our static IP), Resolve 000.000.000.000 to: example.com.
When I select "com." the admin email is populated with a valid email address, Allows zone transfer is NOT checked. In nameservers, Zone is "com." and Nameserver Hostname is "example.com." The mail exchangers are mail2.our-email-isp.com. priority 10 and mail.our-email-isp.com. and priority 20.
When I select the machine "example.com." it shows both the real-world static IP and the 192.168.1.250, same with "www.example.com.".
Am I doing something wrong with this setup? Should "com." be the primary zone or should that be "example.com." ???
I've been thinking about getting rid of the DNS entry for the 192.168.1.250 address altogether, but will the clients in the office suffer performance issues??? I do not think that the client workstations are configured to get DNS from the server anyway. Should the "www.example.com." record be a Machine record or should it be an alias record?
Any help you have to offer is greatly appreciated! Thanks!
In the meantime, I'm going to look around and see if I can understand "Allows zone transfer" and LDAP Search base a bit better.Okay, I found a lovely article at the following address which I think helps me to clarify what I'm doing wrong. Despite that, I'd still like to have any feedback you have to offer.
http://www.makemacwork.com/configure-internal-dns-1.htm
Also, when editing DNS entries, Server Admin likes to set the nameserver to "ns." -- whatever your domain is. Should I be overriding that and if so, replace it with what? -
Need help with QoS config/setup for my home network.
I have a home network that spans two buildings, has and FTP download server, VoIP phones,and several computers among other IP devices. I run a home based business where my clients get access to the company FTP download server (NOT illegal file sharing). the problem is that when they are downloading files my VoIP takes a big hit and gets choppy when speaking to my customers. Below is the layout of the network.
Our Internet access is Verizon 4G, there are no other options available at this time or we would switch. The Verizon 4G MiFi connects to a TP-Link wifi router that then connects to port fa0/5 on the Office 3550PoE switch. There is a trunk between the Office switch to the House 3550PoE switch. The House switch then connects to the Shop 3524XL switch also using a trunk. Please note that EVERYTHING works fine other than the VoIP issue, VoIP makes and receives calls without connections issues.
Auto QoS has been run on the Office switch ports fa0/1 and fa0/2 as well as on the House switch ports fa0/3 and fa0/5. There is NO auto QoS on the 3524XL
What is the best way to give VoIP traffic top priority over FTP and web browsing when going out port fa0/5 on the Office Switch? Over the internal network we are not having any call quality issues between the IP phones, just calls to our SIP provider. Yes, I understand that once calls exit the Office switch to the TP-Link wifi router there will not be any QoS. But, if I can give priority to the packets at the layer 3 Office switch (or wherever you suggest) then at least I will not have to kill a users FTP download while I am on the phone.
Thank YouI can make ANY changes necessary, just need to know what to do.
First, did you notice the output of the command sh mls qos fa0/5 above? Is it working correctly?
Next, Yes I do have version W17 and can install if if needed. The lost of possible commands I listed above was from the conf t - config interface fa0/x level. There is class and policy mapping commands the the config global level along with all these other commands:
aaa Authentication, Authorization and Accounting.
access-list Add an access list entry
alias Create command alias
arp Set a static ARP entry
banner Define a login banner
boot Boot Commands
buffers Adjust system buffer pool parameters
cdp Global CDP configuration subcommands
cgmp Global CGMP configuration commands
class-map Configure QoS Class Map
clock Configure time-of-day clock
cluster Cluster configuration commands
default Set a command to its defaults
default-value Default character-bits values
downward-compatible-config Generate a configuration compatible with older software
enable Modify enable password parameters
end Exit from configure mode
errdisable Error disable
exception Exception handling
exit Exit from configure mode
file Adjust file system parameters
help Description of the interactive help system
hostname Set system's network name
interface Select an interface to configure
ip Global IP configuration subcommands
line Configure a terminal line
logging Modify message logging facilities
mac-address-table Configure the MAC address table
map-class Configure static map class
map-list Configure static map list
mvr Enable/Disable MVR on the switch
no Negate a command or set its defaults
ntp Configure NTP
policy-map Configure QoS Policy Map
power power configuration
priority-list Build a priority list
privilege Command privilege parameters
queue-list Build a custom queue list
rmon Remote Monitoring
scheduler Scheduler parameters
service Modify use of network based services
shutdown Shutdown system elements
snmp-server Modify SNMP parameters
spanning-tree Spanning Tree Subsystem
stackmaker Specify stack name and add its member
tacacs-server Modify TACACS query parameters
tftp-server Provide TFTP service for netload requests
time-range Define time range entries
udld Configure global UDLD setting
username Establish User Name Authentication
vmps VMPS settings
vtp Configure global VTP state -
[SOLVED] Need help with rEFInd boot entry for rsync backup
I made a successful backup my arch install to an other internal SSD disk (from my HDD).
But now I can't figure out how to make a boot entry for this drive. The wiki only mentions GRUB, which I do not use.
This is the fstab for my HDD:
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda5
UUID=c1822e3c-e037-4445-bdd8-b71778237dee / ext4 rw,relatime,data=ordered 0 1
# /dev/sda2 LABEL=SYSTEM_DRV
UUID=D2DF-9F74 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
And this is the fstab on my SSD which I edited:
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sdb1
UUID=c61a1301-4728-465d-b40b-bde5e084eb50 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda2 LABEL=SYSTEM_DRV
UUID=D2DF-9F74 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
But I'm not sure about the /boot entry, do I need something else here?
Afterward I tried updating rEFInd by reinstalling using refind-install, but that did not work.
ps. I dual boot with Windows.
Last edited by Devenda (2014-08-18 07:58:07)I also tried adding the menu entry manually by editing refind.conf but that didn't work. I got:
Invalid loader file!
Error: Not Found while loading vmlinuz-linux
Here is some additional info:
refind.conf:
menuentry "SSD Arch Linux" {
icon /EFI/refind/icons/os_arch.png
volume "ArchSSD"
loader /boot/vmlinuz-linux
initrd /boot/initramfs-linux.img
options "root=/dev/sdb1 ro"
I hope this helps.
blkid
/dev/sda1: LABEL="WINRE_DRV" UUID="7C2ADD1D2ADCD4EC" TYPE="ntfs" PARTUUID="b7137819-2ca6-40fb-9167-b73ac37d8d96"
/dev/sda2: LABEL="SYSTEM_DRV" UUID="D2DF-9F74" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="9c77b526-730f-42f9-9904-f9a31b205687"
/dev/sda3: PARTLABEL="Microsoft reserved partition" PARTUUID="f4d5275b-24c1-4847-b937-345bc23bec89"
/dev/sda4: LABEL="Windows 8" UUID="38D6E449D6E408C8" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="d777a359-f42c-4629-a07c-cc55316352fe"
/dev/sda5: UUID="c1822e3c-e037-4445-bdd8-b71778237dee" TYPE="ext4" PARTUUID="3d282004-2515-4630-b82e-35ed7f707b89"
/dev/sda6: UUID="F80680CC06808D76" TYPE="ntfs" PARTUUID="575bc623-c7f1-44da-a79e-220ce3c98d9b"
/dev/sda7: LABEL="Lenovo_Recovery" UUID="0898D76B98D75632" TYPE="ntfs" PARTUUID="99bfc6d6-1b71-46d1-887e-2f7e65e3eab1"
/dev/sdb1: LABEL="ArchSSD" UUID="c61a1301-4728-465d-b40b-bde5e084eb50" TYPE="ext4" PARTUUID="e87704a5-01"
lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ntfs WINRE_DRV 7C2ADD1D2ADCD4EC
├─sda2 vfat SYSTEM_DRV D2DF-9F74 /boot
├─sda3
├─sda4 ntfs Windows 8 38D6E449D6E408C8
├─sda5 ext4 c1822e3c-e037-4445-bdd8-b71778237dee /
├─sda6 ntfs F80680CC06808D76
└─sda7 ntfs Lenovo_Recovery 0898D76B98D75632
sdb
└─sdb1 ext4 ArchSSD c61a1301-4728-465d-b40b-bde5e084eb50
sr0
boot tree
/boot
├── BOOT
│ └── boot.sdi
├── BOOTSECT.BAK
├── EFI
│ ├── Boot
│ │ ├── bootx64.efi
│ │ ├── LenovoBT.EFI
│ │ ├── License.txt
│ │ └── ReadMe.txt
│ ├── gummiboot
│ │ └── gummibootx64.efi
│ ├── Lenovo
│ │ └── Boot
│ │ ├── BCD
│ │ ├── BCD.LOG
│ │ ├── BCD.LOG1
│ │ ├── BCD.LOG2
│ │ ├── bg-BG
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── bootmgfw.efi
│ │ ├── bootmgr.efi
│ │ ├── BOOTSTAT.DAT
│ │ ├── boot.stl
│ │ ├── cs-CZ
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── da-DK
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── de-DE
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── el-GR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── en-GB
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── en-US
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── es-ES
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── et-EE
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── fi-FI
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── Fonts
│ │ │ ├── chs_boot.ttf
│ │ │ ├── cht_boot.ttf
│ │ │ ├── jpn_boot.ttf
│ │ │ ├── kor_boot.ttf
│ │ │ ├── malgun_boot.ttf
│ │ │ ├── malgunn_boot.ttf
│ │ │ ├── meiryo_boot.ttf
│ │ │ ├── meiryon_boot.ttf
│ │ │ ├── msjh_boot.ttf
│ │ │ ├── msjhn_boot.ttf
│ │ │ ├── msyh_boot.ttf
│ │ │ ├── msyhn_boot.ttf
│ │ │ ├── segmono_boot.ttf
│ │ │ ├── segoen_slboot.ttf
│ │ │ ├── segoe_slboot.ttf
│ │ │ └── wgl4_boot.ttf
│ │ ├── fr-FR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── hr-HR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── hu-HU
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── it-IT
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── ja-JP
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── ko-KR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── lt-LT
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── lv-LV
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── memtest.efi
│ │ ├── nb-NO
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── nl-NL
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── pl-PL
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── pt-BR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── pt-PT
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── qps-ploc
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── Resources
│ │ │ ├── bootres.dll
│ │ │ └── en-US
│ │ │ └── bootres.dll.mui
│ │ ├── ro-RO
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── ru-RU
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── sk-SK
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sl-SI
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sr-Latn-CS
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sv-SE
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── tr-TR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── uk-UA
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── zh-CN
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── zh-HK
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ └── zh-TW
│ │ ├── bootmgfw.efi.mui
│ │ ├── bootmgr.efi.mui
│ │ └── memtest.efi.mui
│ ├── Microsoft
│ │ └── Boot
│ │ ├── BCD
│ │ ├── BCD.LOG
│ │ ├── BCD.LOG1
│ │ ├── BCD.LOG2
│ │ ├── bg-BG
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── bootmgfw.efi
│ │ ├── bootmgr.efi
│ │ ├── BOOTSTAT.DAT
│ │ ├── boot.stl
│ │ ├── cs-CZ
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── da-DK
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── de-DE
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── el-GR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── en-GB
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── en-US
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── es-ES
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── et-EE
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── fi-FI
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── Fonts
│ │ │ ├── chs_boot.ttf
│ │ │ ├── cht_boot.ttf
│ │ │ ├── jpn_boot.ttf
│ │ │ ├── kor_boot.ttf
│ │ │ ├── malgun_boot.ttf
│ │ │ ├── malgunn_boot.ttf
│ │ │ ├── meiryo_boot.ttf
│ │ │ ├── meiryon_boot.ttf
│ │ │ ├── msjh_boot.ttf
│ │ │ ├── msjhn_boot.ttf
│ │ │ ├── msyh_boot.ttf
│ │ │ ├── msyhn_boot.ttf
│ │ │ ├── segmono_boot.ttf
│ │ │ ├── segoen_slboot.ttf
│ │ │ ├── segoe_slboot.ttf
│ │ │ └── wgl4_boot.ttf
│ │ ├── fr-FR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── hr-HR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── hu-HU
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── it-IT
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── ja-JP
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── ko-KR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── lt-LT
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── lv-LV
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── memtest.efi
│ │ ├── nb-NO
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── nl-NL
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── pl-PL
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── pt-BR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── pt-PT
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── qps-ploc
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── Resources
│ │ │ ├── bootres.dll
│ │ │ ├── en-US
│ │ │ │ └── bootres.dll.mui
│ │ │ └── nl-NL
│ │ │ └── bootres.dll.mui
│ │ ├── ro-RO
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── ru-RU
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── sk-SK
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sl-SI
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sr-Latn-CS
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sr-Latn-RS
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── sv-SE
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── tr-TR
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── uk-UA
│ │ │ ├── bootmgfw.efi.mui
│ │ │ └── bootmgr.efi.mui
│ │ ├── zh-CN
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ ├── zh-HK
│ │ │ ├── bootmgfw.efi.mui
│ │ │ ├── bootmgr.efi.mui
│ │ │ └── memtest.efi.mui
│ │ └── zh-TW
│ │ ├── bootmgfw.efi.mui
│ │ ├── bootmgr.efi.mui
│ │ └── memtest.efi.mui
│ ├── refind
│ │ ├── icons
│ │ │ ├── arrow_left.png
│ │ │ ├── arrow_right.png
│ │ │ ├── boot_linux.png
│ │ │ ├── boot_win.png
│ │ │ ├── func_about.png
│ │ │ ├── func_exit.png
│ │ │ ├── func_firmware.png
│ │ │ ├── func_reset.png
│ │ │ ├── func_shutdown.png
│ │ │ ├── os_altlinux.png
│ │ │ ├── os_arch.png
│ │ │ ├── os_centos.png
│ │ │ ├── os_chrome.png
│ │ │ ├── os_clover.png
│ │ │ ├── os_debian.png
│ │ │ ├── os_ecomstation.png
│ │ │ ├── os_fatdog.png
│ │ │ ├── os_fedora.png
│ │ │ ├── os_freebsd.png
│ │ │ ├── os_freedos.png
│ │ │ ├── os_funtoo.png
│ │ │ ├── os_gentoo.png
│ │ │ ├── os_gummiboot.png
│ │ │ ├── os_haiku.png
│ │ │ ├── os_hwtest.png
│ │ │ ├── os_kubuntu.png
│ │ │ ├── os_legacy.png
│ │ │ ├── os_linuxmint.png
│ │ │ ├── os_linux.png
│ │ │ ├── os_lubuntu.png
│ │ │ ├── os_mac.png
│ │ │ ├── os_mageia.png
│ │ │ ├── os_mandriva.png
│ │ │ ├── os_manjaro.png
│ │ │ ├── os_mythbuntu.png
│ │ │ ├── os_netbsd.png
│ │ │ ├── os_openbsd.png
│ │ │ ├── os_opensuse.png
│ │ │ ├── os_redhat.png
│ │ │ ├── os_refind.png
│ │ │ ├── os_refit.png
│ │ │ ├── os_slackware.png
│ │ │ ├── os_suse.png
│ │ │ ├── os_ubuntu.png
│ │ │ ├── os_unknown.png
│ │ │ ├── os_win.png
│ │ │ ├── tool_apple_rescue.png
│ │ │ ├── tool_memtest.png
│ │ │ ├── tool_mok_tool.png
│ │ │ ├── tool_part.png
│ │ │ ├── tool_shell.png
│ │ │ ├── tool_windows_rescue.png
│ │ │ ├── transparent.png
│ │ │ ├── vol_external.png
│ │ │ ├── vol_internal.png
│ │ │ └── vol_optical.png
│ │ ├── icons-backup
│ │ │ ├── arrow_left.png
│ │ │ ├── arrow_right.png
│ │ │ ├── boot_linux.png
│ │ │ ├── boot_win.png
│ │ │ ├── func_about.png
│ │ │ ├── func_exit.png
│ │ │ ├── func_firmware.png
│ │ │ ├── func_reset.png
│ │ │ ├── func_shutdown.png
│ │ │ ├── os_altlinux.png
│ │ │ ├── os_arch.png
│ │ │ ├── os_centos.png
│ │ │ ├── os_chrome.png
│ │ │ ├── os_clover.png
│ │ │ ├── os_debian.png
│ │ │ ├── os_ecomstation.png
│ │ │ ├── os_fatdog.png
│ │ │ ├── os_fedora.png
│ │ │ ├── os_freebsd.png
│ │ │ ├── os_freedos.png
│ │ │ ├── os_funtoo.png
│ │ │ ├── os_gentoo.png
│ │ │ ├── os_gummiboot.png
│ │ │ ├── os_haiku.png
│ │ │ ├── os_hwtest.png
│ │ │ ├── os_kubuntu.png
│ │ │ ├── os_legacy.png
│ │ │ ├── os_linuxmint.png
│ │ │ ├── os_linux.png
│ │ │ ├── os_lubuntu.png
│ │ │ ├── os_mac.png
│ │ │ ├── os_mageia.png
│ │ │ ├── os_mandriva.png
│ │ │ ├── os_manjaro.png
│ │ │ ├── os_mythbuntu.png
│ │ │ ├── os_netbsd.png
│ │ │ ├── os_openbsd.png
│ │ │ ├── os_opensuse.png
│ │ │ ├── os_redhat.png
│ │ │ ├── os_refind.png
│ │ │ ├── os_refit.png
│ │ │ ├── os_slackware.png
│ │ │ ├── os_suse.png
│ │ │ ├── os_ubuntu.png
│ │ │ ├── os_unknown.png
│ │ │ ├── os_win.png
│ │ │ ├── tool_apple_rescue.png
│ │ │ ├── tool_memtest.png
│ │ │ ├── tool_mok_tool.png
│ │ │ ├── tool_part.png
│ │ │ ├── tool_shell.png
│ │ │ ├── tool_windows_rescue.png
│ │ │ ├── transparent.png
│ │ │ ├── vol_external.png
│ │ │ ├── vol_internal.png
│ │ │ └── vol_optical.png
│ │ ├── keys
│ │ │ ├── altlinux.cer
│ │ │ ├── canonical-uefi-ca.der
│ │ │ ├── fedora-ca.cer
│ │ │ ├── openSUSE-UEFI-CA-Certificate.cer
│ │ │ ├── refind.cer
│ │ │ └── SLES-UEFI-CA-Certificate.cer
│ │ ├── refind.conf
│ │ ├── refind.conf.old
│ │ ├── refind.conf-sample
│ │ └── refind_x64.efi
│ └── tools
├── grub
│ ├── grub.cfg
│ └── grub.cfg.example
├── initramfs-linux-fallback.img
├── initramfs-linux.img
├── loader
│ ├── entries
│ │ └── arch.conf
│ └── loader.conf
├── refind_linux.conf
└── vmlinuz-linux
refind_linux.conf
"Boot with standard options" "ro root=UUID=c1822e3c-e037-4445-bdd8-b71778237dee quiet "
"Boot to single-user mode" "ro root=UUID=c1822e3c-e037-4445-bdd8-b71778237dee quiet single"
"Boot with minimal options" "ro root=UUID=c1822e3c-e037-4445-bdd8-b71778237dee" -
Need help with a Silent Installer for Photoshop Elements 10
I can't seem to get the silent installer working. I've used the Elements 9 instructions for 10 but I still get pop-ups requesting info:
http://helpx.adobe.com/photoshop-elements/kb/silent-install-volume-license-photoshop.html
I cannot find any info at all relating specifically to Elements 10. Before I go digging into the msi with ORCA (preferable to have something I can deploy in Active Directory through GPO) I tought I'd ask here@mtarggart
Delete the blank between /UL and 1033, and it will work. :-)
@Davide M, thanks a lot for your helpful article!
mtarggart wrote:
I've tried the above command and I keep getting prompted to select an Install Language. I'm trying to install this on Windows 7 x64 Enterprise. From an elevated command prompt pointed to the directory of the Elements install files (C:\PSE 10), this is what I am typing: start /wait setup.exe /UL 1033 /V"SERIALNUMBER=xxxx-xxxx-xxxx-xxxx-xxxx".
For the ones who want to use installation from a server share,
change "Setup.exe" by using \\Servername\Share\Setup.exe
and set \\Servername\Share to your Servershare.
The last thing I've been searching for was setting the right country
and stopping PSE from asking me which country I am living in.
Seems as if there was an additional switch e.g. "Country=244" for US. -
Need help with Apache on OS X Server 10.4.8
I am unable to get mod_rewrite to work... Additionaly, bonjour is not working at all.
I am wondering if there are any known issues (that I could not find) and/or helpful solutions. I was considering doing a recompile based on the instructions found at http://lists.apple.com/archives/macos-x-server/2005/Apr/msg01171.html
I am not sure if these instructions are valide for the 10.4.8 environment... os if anyone knows fore-sure please do let me know.Sorry, I thought the goal was to get the RewriteRules working - recompiling Apache seemed like the harder approach to me (with no chance of it working if the flaw was in the RewriteRule statement itself )
That said, the instructions you reference will probably work. As will downloading the source from apache.org and running their standard build. It won't be the same as the build as shipped by Apple, though.
The issue is that everyone's instructions on how to build apache (including the one you reference) suits a particular individual's needs/expectations of what s/he wants. In this case they wanted SSL, but you might or might not want/need that. You might need other modules they didn't include, though, so there's no guarantee their build will work for you.
In any case you're not going to get the custom Apple modules including 'apple_auth', 'apple_spotlight', 'hfs_apple' or 'spnego_apple'. These are developed by Apple and included in their build but are not part of the standard Apache distribution. You might find the source for them in the Darwin source but I've never looked.
So, in summary, there are so many ways to build apache, with so many combinations of features and modules, it's impossible to say whether that'll work for you since everyone's situation is different.
Maybe you are looking for
-
My phone is showing usage for photos but none of mine are appearing?
-
How do I upload a Pages document (resume) to a website?
How do I upload a Pages document, my resume, when it only gives the option to choose a file, no copy and paste option? And when I click choose file, pictures are the only thing that come up. Thank you for your help!
-
My 2010 Macbook Pro won't turn on...
I left my Macbook Pro alone for a moment and when I had returned it had shut down on it's own and wouldn't turn back on. (MagSafe unattached) 1. It will not turn on. 2. Battery Indicator - When pressed displays nothing. Computer is super, super dea
-
Issue with To_number when we submit Shipping report from Document set
Hi All We have a report in Shipping responsibility which works fine when we submit from Standard Request form, when we submit through Document set we are getting error as Invalid Number for to_number conversion in formula columns which is ok from sql
-
Primary key, column, sequence : best practice.
Hi I was wondering when designing table should you limit the length of primary key. Because if you have limited column length, and your adding and removing items than you have sequence gap, than you will need to resize column length and if their fore