Need help with Sata Pata setup PLEASE

I am running a MSI 6728 (865 chipset) Windows XP SP2
I want to run 2 SATA drive booting from 1 of them, not interested ib RAID right now.
Also I want to run 2 PATA on IDE1 and I PATA HD and DVD on IDE2.
Sure could use some help configuring this.
I can get all the drives to so up at boot, they show up ad unallocated in the disk managment area. They do not show up at all in "My Computer"
All of these drives are formated and contain data.
Any and all help will be appreciated.
James

Hmm... I'm trying to consolidate as much info as possible to put everything in a sticky thread for all members as a reference guide.
If you guys have any good solutions, you can PM me and I'll create a sticky thread for them.

Similar Messages

Need help with Audio Midi Setup(please Read)

Hello,
I cant find the audio and midi tabs on my toolbar. All I can see is audiomidisetup edit view history bookmarks window help. I need to aggregate a device any ideas or help?

I think what you are looking for is something like this http://66.34.186.88/LiveCyclesamples/ExpandToFit/TextFieldExpandToFit.pdf
I am new to this concept, so I cant help out any more. Hope this helps.

Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.

Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

Need help with threads?.. please check my approach!!

Hello frnds,
I am trying to write a program.. who monitors my external tool.. please check my way of doing it.. as whenever i write programs having thread.. i end up goosy.. :(
first let me tell.. what I want from program.. I have to start an external tool.. on separate thread.. (as it takes some time).. then it takes some arguments(3 arguments).. from file.. so i read the file.. and have to run tool.. continously.. until there are arguments left.. in file.. or.. user has stopped it by pressing STOP button..
I have to put a marker in file too.. so that.. if program started again.. file is read from marker postion.. !!
Hope I make clear.. what am trying to do!!
My approach is like..
1. Have two buttons.. START and STOP on Frame..
START--> pressed
2. check marker("$" sign.. placed in beginning of file during start).. on file..
     read File from marker.. got 3 arg.. pass it to tool.. and run it.. (on separate thread).. put marker.. (for next reading)
     Step 2.. continously..
3. STOP--> pressed
     until last thread.. stops.. keep running the tool.. and when last thread stops.. stop reading any more arguments..
Question is:
1. Should i read file again and again.. ?.. or read it once after "$" sign.. store data in array.. and once stopped pressed.. read file again.. and put marker ("$" sign) at last read line..
2. how should i know when my thread has stopped.. so I start tool again??.. am totally confused.. !!
please modify my approach.. if u find anything odd..
Thanks a lot in advance
gervini

Hello,
I have no experience with threads or with having more than run "program" in a single java file. All my java files have the same structure. This master.java looks something like this:
---master.java---------------------------------------------------
import java.sql.*;
import...
public class Master {
public static void main(String args []) throws SQLException, IOException {
//create connection pool here
while (true) { // start loop here (each loop takes about five minutes)
// set values of variables
// select a slave process to run (from a list of slave programs)
execute selected slave program
// check for loop exit value
} // end while loop
System.out.println("Program Complete");
} catch (Exception e) {
System.out.println("Error: " + e);
} finally {
if (rSet1 != null)
try { rSet1.close(); } catch( SQLException ignore ) { /* ignored */ }
connection.close();
-------end master.java--------------------------------------------------------
This master.java program will run continuously for days or weeks, each time through the loop starting another slave process which runs for five minutes to up to an hour, which means there may be ten to twenty of these slave processes running simultaneously.
I believe threads is the best way to do this, but I don't know where to locate these slave programs: either inside the master.java program or separate slave.java files? I will need help with either method.
Your help is greatly appreciated. Thank you.
Logan

Need help with flash player installation please !!!!

Hello,
I need help with my flash player installation because every time I access a movie this is the message I receive.
This content on Xfinity TV is not available for viewing with Chrome's "Incognito" mode. To play this video using Chrome, please view this page without "Incognito" mode.
Still having problems? Try resetting your Flash player license.

Incognito mode is a Google Chrome setting when you open a new window (Cmd+Shift+N on a Mac Ctrl+Shift+N on Windows) It opens a "private" window with no cookies and no tracking. The problem with it is that when you disable cookies, your license files are not sent to the site (whetehr it's YouTube or xFinity or any other that uses license files for paid content) and it treats you as if you're a first time visitor. Paid videos won't play wihtout the cookies sending the license file info.
This isn't a Flash Player setting. It's in Chrome. I did some research and according to Google, "Incignito" mode is off by default, and can ONLY be activate by the keyboard shortcut. There IS a way to disable it from the registry http://dev.chromium.org/administrators/policy-list-3#IncognitoModeAvailability

I need help with printing labels. please

I need help with printing labels. thanks in advance

Welcome to Apple Support Communities.
In Address Book, first select a name or group of names to print.
Then File, Print, select Style, Mailing Labels, then Layout to select a specific target label (such as an Avery number), or define your own...

Need Help With ACS LDAP setup to Query AD

I have 2 Win 2003 ADs, one of them is configured and working under Windows Database (using remote agent) configuration. I am trying to setup the second AD with Generic LDAP setup. I want to know what exactly I should use in the fields UserObjectType and Class, and GroupObjectType and Class for Windows 2003 AD. All Cisco documents give example of Netscape LDAP syntax. I was told by our server admin. what to put under Admin DN, CN=myid,OU=mygroup,OU=myorg,DC=mydomain,DC=com
I have both user & group directory subtree fields filled with DC=mydomain,DC=com.
I am using the ip address for Primary LDAP server, and port is 389, LDAP version 3 is checked.
Is any of these DC, OU, etc. case sensitive?
With all entries that I have tried, when I go to map a group, I am getting error "LDAP server NOT reachable. Please check the configuration". My ACS can ping the domain controller's IP address fine.
Please help. Thank you in advance,
Murali

Murali,
These references may help...
http://download.microsoft.com/download/3/d/3/3d32b0cd-581c-4574-8a27-67e89c206a54/uldap.doc
http://www.microsoft.com/technet/archive/winntas/plan/dda/ddach02.mspx?mfr=true
http://technet.microsoft.com/en-us/library/aa996205.aspx
Regards,
Richard

Need Help with Migration...Please

Hello,
I need help! I just bought a new MacBook Pro. In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS). I also have the iMac connected to a Time Capsule. Here are my questions:
1. As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook? Is there an issue running computers which are clones in the same environment? Is it a bad idea to migrate?
2. Assuming # 1 is okay to migrate, what is the best way? Is it best directly from the iMac or from the Time Capsule? I do have a Thunderbolt to Ethernet adapter on hand.
3. Is there a link that would help me navigate the migration?
4. How long should the migration in #2 take?
5. Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
6. Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
7. Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
Any help would greatly be appreciated. Thank you!

Hello,
I need help! I just bought a new MacBook Pro. In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS). I also have the iMac connected to a Time Capsule. Here are my questions:
1. As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook? Is there an issue running computers which are clones in the same environment? Is it a bad idea to migrate?
2. Assuming # 1 is okay to migrate, what is the best way? Is it best directly from the iMac or from the Time Capsule? I do have a Thunderbolt to Ethernet adapter on hand.
3. Is there a link that would help me navigate the migration?
4. How long should the migration in #2 take?
5. Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
6. Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
7. Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
Any help would greatly be appreciated. Thank you!

Need Help with new site glitches PLEASE!!!

I need help trouble shooting a website. The site is
www.farrowandwatkins.com. Nav buttons on Mac they display correctly
which is aligned at top and bottom of content to left on Home page.
However, when viewed on PC, the buttons spread to fill the
distance of the "Patients" Page. All the pages spread to this
length also, but are not suppose to.
Nav buttons have padding of 10 on bottom, except last one.
Please help if you can

First guess would be that there doesn't seem to be a fixed
height or width on the cell for the 'patients' button.

I need help with the https class please.

Hello, i need add an authentication field in my GET request using HTTPS to authenticate users. I put the authentication field using the setRequestProperty method, but it doesn't appear when i print all properties using the getRequestProperties method. I wrote the following code:
try{
URL url = new URL ("https://my_url..");
URLConnection conexion;
conexion = url.openConnection();
conexion.setRequestProperty("Authorization",my_urlEncoder_string);
conexion.setRequestProperty("Host",my_loginServer);
HttpsURLConnection httpsConexion = (HttpsURLConnection) conexion;
httpsConexion.setRequestMethod("GET");
System.out.println("All properties\r\n: " + httpsConexion.getRequestProperties());
}catch ....
when i run the program it show the following text:
All properties: {Host=[my_loginServer]}
Only the Host field is added to my HttpsURLConnection. The authentication field doesnt appear in standar output. How can i add to my HttpsURLConnection an Authentication field?
thanks

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

I need help with socket connection pooling please

I need a basic connection pooling system for the code below users sets number connections 5 etc.
<main class>
s = new ListService(ssock.accept(),serverDir); //give list to client
Thread t = new Thread(s);
t.start();
<main class>
class ListService implements Runnable
Socket client;
String serverDir;
public ListService(Socket client,String serverDir)
this.client = client;
this.serverDir = serverDir;
public void run()
try
BufferedWriter out = new BufferedWriter(new OutputStreamWriter(client.getOutputStream()));
// send something to client
catch(Exception e)
System.out.println(e);
System.out.println("client disconnected\n");
catch(Exception e){}
Thank you so much

My code already accepts multi clients I need pooling only 5 clients can be using the server at a time when one client disconnects that means another incoming client can enter the pool to use the server.
I tried to do a counter so when a connection is made it increments and then if counter>=numOfClients
set a variable to true or false and this is sent with the server setup so it determines if the server code is run or it just closes the connection but there is no way I can access the counter variable from within a runnable class thread when a client closes connection it should -1 from the variable
thanks

I need help with my wifi sync, please?

I am trying to sync a single band from my laptop to my iPhone. This is my new laptop and I have no transfered all my music from my old computer onto here, so I can not sync through the cable or else I will have to remove all my exsisting information on my phone, I do not have all my music on my laptop yet. All I want is to simply transfer a few songs from my iTunes to my phone wirelessly and I can't. I enabled the button when I plug in my phone that tells me I can sync wirelessly but when I disconnect it refuses to work. Please I need help.

Dear friend, by the moment Blackberry playbook is just for USA/Canada users, in a very short time RIM will announce the release of the product for the rest of countries.
Be patient when you can use it at 100%, you will be amazed!

I just bought my MacBook Pro 13" and I tried to install an anti virus but then it went into a grey folder with a question mark I need help with restoring the iOS please

I need help taking out the grey folder with the question mark and I've try everything except the CD thing because my MacBook didn't come with one so I really need help please

What anti-virus software did you install? Although there's a lot of bad anti-virus software out there, no anti-virus software should cause such a problem. A gray screen with a flashing question mark on a folder means that no bootable system could be found, which means that the system was badly damaged or corrupt. Even installing bad software would not normally cause that, so either there was something badly wrong with the system already or the anti-virus software you tried to install was really, really bad!
As mende1 says, you need to reinstall the system at this point. After your system is back up and running, read my Mac Malware Guide. If, after reading that, you want anti-virus software, use one of the programms recommended in that guide.

I need help with the navigation menu please?

I have been working my way through your six part printed instructions and I am styling the header and navigation menu. The bullet points disappeared which was correct and the tabs moved to the right, as they should, but one tab sits underneath another tab and all tabs are covered up by my main heading. This is dreamweaver CS6.
It looks a bit of a mess!

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

I need help with website can you please

Need help
Message was edited by: Liam Dilley - Phone number in here is a bad idea

Hi,
I removed your phone number as you will just get cold called
BC support does not call you for help and people here can help you here. Just saying "need help" is not much use though, we need to know what kind of help you need.

Need help with Sata Pata setup PLEASE

Similar Messages

Maybe you are looking for