Need Help with satelite A205-S7442 laptop

Okay I recently got my 2 years old cousin hit my screen with a remote now its not letting me see my screen at all. its not cracked from the outside but from the inside. however I dont know if my warranty expired or not. How can I see if it did or not and what shall i do about the screen?
Please help me!

Unless you bought an extended warranty that covers accidental damage, the expiration won't be relevent.  The standard warranty does not cover accidental damage to the LCD panel.

Similar Messages

  • Need help with fixing msi gt683 laptop

    Hello. I have a GT 683 R that i bought a couple of months back, i recently did a factory restore on it and afterwards i didn't have the disk to finish the process, so i started messing with the settings and everything i reset the raid to non raid and now i'm stuck on a screen that says "Reboot and Select proper Boot device or insert boot media in selected boot device and press a key".
    I tried using the recovery again and it wouldn't even boot to that menu, i hit F11 to try to boot from disc but all it does is go to the reboot and select proper boot device screen.
    I need a lot of help on this because i'm not really good with computers.

    if you switch from AHCI or IDE, back to RAID in the BIOS (by pressing DEL when the MSI logo appears on the screen, and going to "advanced options")
    does it boot into the recovered system ?
    switching into/out of RAID mode, requires you to use the RAID setup screen to configure the RAID when it's installed, by pressing ctrl + i when you see the RAID screen just after the MSI logo screen on booting up each time.
    as for recovery, you may have more options depending on if you break the RAID, or if you have a backup of windows 7 or a way to copy the ISO to a USB. or just put in the recovery DVD's (mine weren't too helpful)
    i.e. http://forum.notebookreview.com/msi/672814-need-help-installing-ssd-gt683r-raid-0-a-2.html
    switching out of RAID mode is tricky because the controller makes small changes to the HDD's so they are recognised as RAID.
    typically, windows won't let you see the drive if the flag is set, but you can wipe the setting out using backup/clone software or low-level tools that bypass the normal windows settings to blank the drive.
    or you can use the RAID setup screen to remove the drives from the array, which is quite a lot faster and less effort, but you will lose all the data on the drives in both situations when switching from RAID, to 2 drives.

  • Need help with teen's quirky laptop

    Teen son got new laptop to go off to college. I have his old one, noted above. Would like to make it workable for me. It does a variety of strange things. I have run malwarebytes on it and deleted about 61 files. Still doing odd things including wont allow me to install a photoshop disk, odd windows popping up in browser, will only open docs from my free agent drive as read only and gives me no way to enable editing...etc, etc, etc...Teen son I think did lots of odd browsing and downloading and I think this thing is a mess. Before I go buy a new one I'd like to try a restore back to factory. Did a bit of on line reading about this and there seems to be concerns re further damage, something about partition points, restore disks (do not have any). So, is factory restore the way to go, any trouble I can get into, anything I need to do before proceed? I am a mom with limited knowledge/ability on this end of things. Answers in pretty simple language appreciated, thanks.

    Here's a list of the possible WiFi choices for just Win XP.. Does anyone know which one(s) are necessary to get the WiFi working?
    10-09-2006 Driver
    Wi-Fi
    Intel(R) 802.11b Driver V1.2.4.41 & PROSet Utility V7.1.4.7 (v1.2.4.41; 10-09-2006; 13M)
    09-19-2006 Driver
    Wi-Fi
    Intel(R) 802.11a/b/g,b/g Driver V10.5.1.59/V9.0.4.17 & PROSet V10.5.0.1 (v10.5.1.59; 09-19-2006; 51M...
    11-12-2004 LAN
    Wi-Fi
    Intel 802.11b Mini PCI Wi-Fi Driver for Windows XP/2000 (v1.2.3.10; 11-12-2004; 1M)
    11-12-2004 LAN
    Utility
    Wi-Fi
    Intel PRO/Set Wi-Fi (802.11b) Client Utility for Windows XP/2000 (v7.1.3; 11-12-2004; 11M)
    06-23-2004 LAN
    Toshiba Utility
    Wi-Fi
    Toshiba ConfigFree Utility for Windows XP/2000 (v4.60.05; 06-09-2004; 19M)
    06-11-2004 Driver
    LAN
    Wi-Fi
    Atheros 802.11a/b/g Wireless LAN Driver for Windows XP/2000 (v3.1.2.12; 06-07-2004; 1018K)
    06-08-2004 LAN
    Wi-Fi
    Atheros 802.11a/b/g WiFi Client Utility for Windows XP/2000 (v3.1.1.51; 05-27-2004; 8M)
    02-17-2004 Driver
    LAN
    Wi-Fi
    Toshiba 802.11a/b/g Driver set (Intel, Cisco, Atheros) for Windows XP (v1.11; 01-21-2004; 3M)
    02-17-2004 Utility
    Wi-Fi
    Toshiba Wireless Client Utilities (Intel, Cisco, Atheros) for Windows XP (v1.11; 01-21-2004; 23M)
    11-11-2003 Driver
    Wi-Fi
    Atheros 802.11a/b/g WiFi driver with Cisco/WPA support for Windows XP/2000 (v2.4.2.14; 11-11-2003; 3...
    11-11-2003 Utility
    Wi-Fi
    Atheros WiFi Client Utility with Cisco/WPA Support for Windows XP/2000 (v2.4.2.18; 11-11-2003; 4M)

  • I have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest from itouch to laptop please??

    i have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest of the songs (from my cd's) from itouch to laptop please??

    See this previous discussion:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • Need help with duplicate print jobs over network that I can't cancel

    I have the Photosmart Premium All-in-One on my home network.  My kids who each have laptop running Windows 7 and are connected via wireless to the printer via a DLINK DIR-655.
    They hit the print button too many times and it keeps printing over and over again.
    Is there a way to get the printer to stop printing these duplicates.  I tried turning off/on but they just keep printing.
    We're wasting paper/ink and I need help with a solution.
    Please let me know.  Thanks.
    Angelo

    There should be a button with a red 'X' on it on the front of the printer.  This is the print cancel button.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

    need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

    Hi,
    As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords.  Your best option would be to contact HP regarding this.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Need help with installation

    I recently received a laptop from school to access my online classes.  When I tried to use Adobe Reader I received the following message:  Adobe Reader 9.1 has encountered a problem and needs to close.  Sorry for the inconvenience.  I tried tech support at school and was told to uninstall and reinstall the program.  During the installation process I received the following error:  Error 1321 The installer has insufficient privileges to modify the file C:/Program Files/Adobe/Reader 9.0/Reader/Onix32dll. I need this program for school.  Can some one please help me.

    Hello again, Michael,
    Was unable to do the UAC changes.  Buttons where not highlighted.  I just went ahead and uninstalled Adobe and downloaded Foxitsoftware and it works.   Thanks for all your help Michael you have made my online school experience better.
    Sincerely,
    Sherri Lee
    Date: Mon, 13 Jul 2009 11:03:52 -0600
    From: [email protected]
    To: [email protected]
    Subject: Need help with installation
    Hello again, Sherri:
    It's my pleasure to provide assistance when I can :•) Having just recently graduated after 7 years of effort just to get a 2-year degree, I can relate to needing software to get class work accomplished. I will do everything I can to make it happen for you today.
    Since you didn't mention, the UAC setting, I'd like you to disable it for me if it isn't already:
    1. Open Control Panel
    2. Under User Account and Family settings, click on the "Add or remove user account"
    3. Click on any user account
    4. Under the user account click on the "Go to the main User Account page" link.
    5. Under "Make changes to your user account", click on the "Change security settings" link
    6. In the "Turn on User Account Control (UAC) to make your computer more secure" click to unselect the "Use User Account Control (UAC) to help protect your computer". Click on the Ok button.
    7. You will be prompted to reboot your computer - do so when ready
    You may need to uninstall/reinstall Reader after the reboot in order for the problem to go away, but that part I am not certain of. Try to duplicate the issue prior to taking that step.
    If you are unable to resolve issues with Adobe Reader, I recommend using a different reader that has much less bloat and is updated regularly:
    http://www.foxitsoftware.com/pdf/reader/
    FoxIT is a FREE alternative to using Adobe's Reader. Support for free Adobe products is limited forums such as this. The same holds true for open source alternatives except the manufacturer usually helps support their forums while Adobe doesn't monitor this forum or any like it. I know how important it is for you to focus on your classes so don't beat your head against a wall just because Reader won't work when a viable solution exists.
    Best of success in your pursuit of knowledge!
         Michael
    >

  • Need help with Outlook 2013 connecting to Exchange server(2010)

    Hi
    I need help with Outlook 2013 and with my exchange server(2010) email account
    After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
    However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long.  In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
    and any emails I compose dont work.  I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue  I have also done a TraceRoute and that shows no drops or problems to he exchange server.
    Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
    Look forward to a solution soon
    Thanks

    Hi Angela
    Thanks for your message
    To answer your questions, please note the following
    a) My account is set up in Cache Mode( not online mode)
    b) I am the only other user on the account
    c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
    d) When the connection to the server is there, it shows  connection as "established"
    e) Sorry I dont understand th meaning of CAS array in your environment?  Can you pls explain
    Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account.  So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
    as it has done that in the past on both outlook versions.  The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
    My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results.  I have also changed the profile a few times, but the intermittent connectivity problem hasn't
    been resolved.
    Can you identify the possible causes and more importantly a working permanent solution please
    Thanks
    Mahesh

  • Need help with a WRT54GS V5.1

    i need help with my WRT54GS V5.1 wireless router. it cannot connect to the internet and i don't know why. at the moment i have to use an ethernet cable coming from a virgin media modem. information that might be usefull. one of the antennas on the router is broke i am using windows vista on a toshiba laptop. the model is WRT54GS V5.1 thanks for people who help note: i am only 13 so somethings you say i might not understand.

    Access Setup page of router .....
    Click wireeless tab .... have a note of the wireless settings on that page .... Please click on the tab "Application and gaming" and click on sub
    tab "Port range forwarding"
    1) On the first line in Application box type in "Xbox", in start box
    type in 88, in end box type in 88, in protocol keep it both, in ip
    address type in 192.168.1.20 and give a check mark on enable box.
    2)   On the second line in Application box type in "Xbox", in start box
    type in 3074, in end box type in 3074, in protocol keep it both, in ip
    address type in 192.168.1.20 and give a check mark on enable box.
    3) Now save the settings
    4) Once you return to the setup page, click on the tab "Administration"
    and disable the UPNP and save the settings.
    5) Now assign the given ip address on your xbox
       ip address :- 192.168.1.20
       subnet mask :- 255.255.255.0
       default gateway :- 192.168.1.1
    Please assign the dns address on the xbox
      primary dns :- 4.2.2.2
      secondary dns :- 192.168.1.1
    6) Please try to test your xbox live.

  • Need help with installing on Photosmart C7280 all-in-one

    I did have my printer installed, and was using the printer for 3 laptops wireless within my home.  Now I can not even find my Backup disk, so i need help with downloading the software to use my printer, and also get it back to being used wireless.   I do not know what happened, but the fax for this printer is listed, just not the printer itself.   please help!
    This question was solved.
    View Solution.

    Click here to download the software for your printer:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3204785&lc=en&cc=us&dlc=en&lang=en&cc=us
    chose the appropriate operating system that corresponds to your computer and download the full feature software.
    Please click on KUDOS if you find my solution helpful.

  • Need help with new itouch

    Please bare with me, while I 'try' to explain.
    I have my itunes account linked to my iphone and macbook. I have bought my daughter an itouch for Xmas. Now I have set up a seperate itunes account for her on my other Windows laptop. So she is able to purchase apps without them going and clogging up my itunes... NOW this is the bit i need help with...
    How can i transfer any music i have on my itunes to her itunes? and vice versa?
    Thanks in advance

    Right, I have now gone down the line of setting up a new user on my macbook, her own ID and then with the help of Mr google, I followed the steps of sharing my music, by moving my itunes media folder to a shared folder.
    Now i got my music on her itunes libary but when i did a test download of an app, it wont show in the library. I have even done the 'transfer purchases'. and its still not showing. I am slowing loosing the will to live with it! I really need help.

  • Need help with new 8310

    Just upgraded from earlier blackberry and have two problems I need help with!
    First, in rearranging the icons my browser icon disappeared and I can't get it back even when I use the show all function.  Any ideas?
    Second, unlike my earlier blackberry, messages I sent from my office laptop are not appearing in my messages.  What setting do I need to tweak?  I like my blackberry to show all the messages sent from or received by the laptop.
    Thanks.
    Lauren

    My BB setting was to not hide sent messages, but the problem I think has to do with the settings on syncing with my computer.  Messages I send from the blackberry show up as sent - but I want the BB to match completely with the email on my computer - show every email received and every email sent.  That was how the old BB was set up.  Any ideas on what else to tweak either on the desktop or the BB?  Thanks for your help.

  • Need help with error: No bootable device -- insert boot disk and press any key

    Hello, I need help will my laptop and the error, the message says "no bootable device ", I have tried taking out the hard drive but it still doesn't work. My laptop is a Satillite C55D-A5372. I need help with this; if you know about this ans know how to fix it please reply or email me @ [email protected]
    If needed more clarifications ask me.
    Thank you,
    Jkmano

    if you got into the bios/uefi and have determined that the hdd is being detected then that is good.  At least the hdd is operating to some extent, although still may be corrupt OS or the like.
    Eagle asked you what OS your using (i.e., Windows 8.1 64-bit, Windows 7 32-bit, etc.).  I see that English is not your native language so we'll just have to work with that as best we can. 
    Did you make any changes to the operating system (OS) as a result of the link you posted, and what were they? 
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • Need help with illustrator cs5

    Hi everyone.....first time on a forum and hope someone can help. I am  using illustrator cs5 on OSx snow leapard. I am  designing wings, following a demo and when I get to the part where I am supposed to use the reflect tool, I come to grief. Firstly the reflect tool dialogue box has two windows in the options part.....patterns or objects. I am supposed to be able to uncheck these but they are greyed out and not changeable. Secondly when I try to reflect my wing, using the option key to copy as well, the program appears to turn my wing over and give me a view of what would be the back of the wing, not a reflection. My fella and I have spent some considerable time trying to figure out what the issue is but to no avail...........Hope someone can help ..........Josephine Star.

    Josephine,
    In the future, please try to title your threads with something meaningful. Titles like "help" or "need help with Illustrator" or "Beginner Question" are useless. Fairly all posts are about "help with Illustrator" and about 98% of them are from beginners.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    why won't my reflect tool operate properly.....we have just spent another hour trying to sort it out.
    Is your Reflect Tool not operating as shown in Illustrator's instructions (online Help)? If not, how is it behaving differently?
    Have you looked at the instructions? If not, do you not think that spending over an hour while typing posts in an online forum, waiting for answers (which are as often incorrect as correct) for every little question you may have about Illustrator is a much less time-efficient way to learn the program than reading the provided documentation?
    function(){return A.apply(null,[this].concat($A(arguments)))}
    when I try to reflect my wing, using the option key to copy as well, the program appears to turn my wing over and give me a view of what would be the back of the wing, not a reflection
    "A view of what would be the back" (i.e.; a mirror image) is what Reflect means in the context of Illustrator's Reflect tool. What did you expect different?
    Clicking with the Reflect Tool while holding alt/opt(Windows/Mac) sets the center of transformation where you click and invokes the dialog. So, for example, if the object is bilaterally symetrical about its vertical axis (like an upward-pointing triangle), and you altClick its center and then click OK in the resulting dialog, there will be no difference, because the mirror image of such a triangle reflected across a vertical axis would be identical.
    Unless it changed in CS5 (don't have it loaded on this laptop)--which I doubt, clicking Copy instead of OK in the dialog is what makes a reflected copy; not holding the alt/opt key.
    If you...
    1. Mousedown with the Reflect Tool
    2. Press and hold Alt
    3. Drag
    ...then you will reflect the object about the position where you mousedown, interactively (without invoking the dialog). While doing so, if you also add the Shift key before mouseup, the reflection will be a copy.
    JET

  • Need help with accessing the program.

    I need help with accessing my adobe creative cloud on my windows 8.1 laptop. I have an account but do not have an app. I need this for my online classes. Please help!

    Link for Download & Install & Setup & Activation may help
    -Chat http://www.adobe.com/support/download-install/supportinfo/

Maybe you are looking for