Need help with SB X-FI installation
I just got my SB x-fi I cant figure out how to install it. I have a MSI K8N Neo4 motherboard. It uses the nforce4 chipset and I have gig of cruical ram, and a AMD athlon 64 3.0 cpu. I have a WD raptor 40g, and a seagate 300g. The only other thing i have in the computer is a dvd rom dri've. anyway the problem:
With the card installed I get a error message on boot up:
warning: Have option ram cannot be invoke (vendor ID: 000....
The warning goes on but thats the jist of it.
The mobo has onboard audio but I have disabled the only thing I could find in the bios relating to audio. (all that i could find at least) I have tried the card in the 2 and 3 pci slots but same thing happens. I havent tried the st pci slot becuase the PCIE slot with the video card blocks the st pci slot.
I have also deleted and disabled all the onboard audio stuff in windows, but nothing changed.
Any help would be appreciated.
thnx
In the Knowledge Base, it says you can have problems with nForce4 motherboards, and suggests that updating the BIOS will solve the problem. Howver, I've got a Gigabyte nForce4 board, updated to the latest BIOS, and no go. Looks to me that the X-Fi and the nForce4 don't play well together.
Similar Messages
-
This is really frustrating me, but I recently uninstalled v4.3 and have been struggling to re-install ANY version of the DM onto my XP Pro machine. I have followed every bit of advice I can find including clean un-install / install, change the TEMP environment variable, unzip the installer and store locally, but I still can't figure this out.
I've been studying the installer log file, and I think this might be a clue:
InstallShield 14:12:58: Registering Msi Server...
MSI (c) (4C!DC) [14:12:58:742]: Note: 1: 2732 2: 0
InstallShield 14:12:58: Invoking script function RIM_CheckForDesktopDowngrade
RIM: Found existing DesktopMgr.exe at: C:\Program Files\Research In Motion\BlackBerry\DesktopMgr.exe
RIM: Failed to retrieve version info from: C:\Program Files\Research In Motion\BlackBerry\DesktopMgr.exe
InstallShield 14:12:58: CallScriptFunctionFromMsiCA() ends
MSI (c) (4C!DC) [14:12:58:774]: Leaked MSIHANDLE (55) of type 790531 for thread 3804
MSI (c) (4C!DC) [14:12:58:774]: Leaked MSIHANDLE (54) of type 790531 for thread 3804
Action ended 14:12:58: RIM_CheckForDesktopDowngrade. Return value 3.
MSI (c) (4C:40) [14:12:58:789]: Doing action: SetupCompleteError
Action 14:12:58: SetupCompleteError.
Action start 14:12:58: SetupCompleteError.
Info 2898.For Tahoma8 textstyle, the system created a 'Tahoma' font, in 0 character set.
Info 2898.For TahomaBold10 textstyle, the system created a 'Tahoma' font, in 0 character set.
Action 14:12:58: SetupCompleteError. Dialog created
It seems to think that I have a previous version installed in my Program Files, but no such executable exists (as I mentioned earlier, I have followed the clean install procedures more than once
Any ideas?
Message Edited by tbarcelo on 05-19-2009 02:21 PM
Solved!
Go to Solution.Hi and Welcome to the Forums!
You say you followed the instructions for a clean install -- but what about a clean un-install? Those instructions are here...
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB02206&slic...
Edit -- oh...and reboots...lots of them...one between each step...after an uninstall...after an install...etc.
Message Edited by sdgardne on 05-19-2009 11:09 AM
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Oracle SQL Newbie need help with OE Demo Schema Installation
Hello everybody !
I'm hoping some kind soul can help out this SQL newbie.
First of all i've installed 10g R2 database on a PC running XP SP2.
Oracle is installed on the root C: drive
I'm using the SQL Fundamentals I Exam Guide and DBA Handbook (Both Oracle Press)
as my reference.
My problem is this.
I installed the DB and created the demo HR schema without too much problem
but it's the demo OE schema i'm having problems getting running and cannot
find anywhere on the net that outlines a step by step SQL process.
I am using SQL Plus to execute these commands.
My questions are these:
-For the default tablespace i specify "users" ?
-What do i specify for the temporary tablespace ? "temp" ?
-what directory path do i put for the data files as parameter 6 ?
I put down "C:\oracle\product\10.2.0\db_1\demo\schema\order_entry" but i suspect it's
the wrong thing ?
-What do i specify for the writable directory path for the log files ?
Is it C:\oracle\product\10.2.0\RDBMS\log
-And what is "Specify version as parameter 8:" line ?
I assumed it was the db version but i believe it's wrong.
Could somebody please help me ? I've already done my CCNA and i wanted to add oracle under my belt.
I know if i had these few things cleared up for me it would pave the way to actually enjoying learning Oracle :)
Thank you for any assistance :)I installed the DB products from the companion disk and there was no specific mention of the demo schemas. Regardless... They're all there within the demo subfolder and have already created the hr schema.. I just need somebody (I'll pay if necessary) to PLEASE just answer (what would be easy to you guys my questions so i can move on.
this is a cap from my sql plus..
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jun 14 15:01:29 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> alter user oe account unlock identified by oe;
User altered.
SQL>
specify password for OE as parameter 1:
Enter value for 1: mewfymewf
specify default tablespeace for OE as parameter 2:
Enter value for 2: users
specify temporary tablespace for OE as parameter 3:
Enter value for 3: temp
specify password for HR as parameter 4:
Enter value for 4: mewfymewf
specify password for SYS as parameter 5:
Enter value for 5: mewfymewf
specify directory path for the data files as parameter 6:
Enter value for 6: C:\oracle\product\10.2.0\db_1\demo\schema\order_entry
writeable directory path for the log files as parameter 7:
Enter value for 7: C:\oracle\product\10.2.0\db_1\RDBMS\log
specify version as parameter 8:
Enter value for 8: 10.2.0
User dropped.
old 1: CREATE USER oe IDENTIFIED BY &pass
new 1: CREATE USER oe IDENTIFIED BY mewfymewf
User created.
old 1: ALTER USER oe DEFAULT TABLESPACE &tbs QUOTA UNLIMITED ON &tbs
new 1: ALTER USER oe DEFAULT TABLESPACE users QUOTA UNLIMITED ON users
User altered.
old 1: ALTER USER oe TEMPORARY TABLESPACE &ttbs
new 1: ALTER USER oe TEMPORARY TABLESPACE temp
User altered.
Grant succeeded.
Connected.
Session altered.
Session altered.
SP2-0310: unable to open file "C:\oracle\product\10.2.0\db_1/demo/schema/order_entry/coe_10.2.0"
SP2-0310: unable to open file "C:\oracle\product\10.2.0\db_1/demo/schema/order_entry/loe_10.2.0"
SP2-0310: unable to open file "C:\oracle\product\10.2.0\db_1/demo/schema/order_entry/poe_10.2.0"
Session altered.
...creating subschema OC in OE
Type created.
Type body created.
Table created.
FROM inventories i, warehouses w
ERROR at line 6:
ORA-00942: table or view does not exist
FROM product_information p
ERROR at line 10:
ORA-00942: table or view does not exist
FROM customers c
ERROR at line 20:
ORA-00942: table or view does not exist
FROM customers c
ERROR at line 20:
ORA-00942: table or view does not exist
FROM customers c
ERROR at line 20:
ORA-00942: table or view does not exist
FROM orders o
ERROR at line 9:
ORA-00942: table or view does not exist
ON oc_orders FOR EACH ROW
ERROR at line 2:
ORA-00942: table or view does not exist
TABLE order_item_list OF oc_orders FOR EACH ROW
ERROR at line 2:
ORA-00942: table or view does not exist
Commit complete.
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
1 row created.
1 row created.
1 row created.
1 row created.
Type altered.
3 rows updated.
0 rows updated.
0 rows updated.
0 rows updated.
Commit complete.
Type body altered.
Type body altered.
Type body altered.
PL/SQL procedure successfully completed.
SQL>
Like i can figure out that the "version in parameter 8" has something to do with the coe, poe & loe files
but i don't know what.
If somebody can please help me with my questions then i know i can move on.
Thanks
Edited by: user11216992 on Jun 14, 2010 3:37 PM -
Need Help with Java 2 sdk installation
I saved Java 2 sdk from the internet and when I try to open it a window comes up: Java development kit. The installshield (ikernel.exe) could not be lounched. Class not registered. Can any one help me please!
This may apply:
http://support.installshield.com/kb/view.asp?pcode=ALL&articleid=Q105146 -
Need help with flash player installation please !!!!
Hello,
I need help with my flash player installation because every time I access a movie this is the message I receive.
This content on Xfinity TV is not available for viewing with Chrome's "Incognito" mode. To play this video using Chrome, please view this page without "Incognito" mode.
Still having problems? Try resetting your Flash player license.Incognito mode is a Google Chrome setting when you open a new window (Cmd+Shift+N on a Mac Ctrl+Shift+N on Windows) It opens a "private" window with no cookies and no tracking. The problem with it is that when you disable cookies, your license files are not sent to the site (whetehr it's YouTube or xFinity or any other that uses license files for paid content) and it treats you as if you're a first time visitor. Paid videos won't play wihtout the cookies sending the license file info.
This isn't a Flash Player setting. It's in Chrome. I did some research and according to Google, "Incignito" mode is off by default, and can ONLY be activate by the keyboard shortcut. There IS a way to disable it from the registry http://dev.chromium.org/administrators/policy-list-3#IncognitoModeAvailability -
I recently received a laptop from school to access my online classes. When I tried to use Adobe Reader I received the following message: Adobe Reader 9.1 has encountered a problem and needs to close. Sorry for the inconvenience. I tried tech support at school and was told to uninstall and reinstall the program. During the installation process I received the following error: Error 1321 The installer has insufficient privileges to modify the file C:/Program Files/Adobe/Reader 9.0/Reader/Onix32dll. I need this program for school. Can some one please help me.
Hello again, Michael,
Was unable to do the UAC changes. Buttons where not highlighted. I just went ahead and uninstalled Adobe and downloaded Foxitsoftware and it works. Thanks for all your help Michael you have made my online school experience better.
Sincerely,
Sherri Lee
Date: Mon, 13 Jul 2009 11:03:52 -0600
From: [email protected]
To: [email protected]
Subject: Need help with installation
Hello again, Sherri:
It's my pleasure to provide assistance when I can :•) Having just recently graduated after 7 years of effort just to get a 2-year degree, I can relate to needing software to get class work accomplished. I will do everything I can to make it happen for you today.
Since you didn't mention, the UAC setting, I'd like you to disable it for me if it isn't already:
1. Open Control Panel
2. Under User Account and Family settings, click on the "Add or remove user account"
3. Click on any user account
4. Under the user account click on the "Go to the main User Account page" link.
5. Under "Make changes to your user account", click on the "Change security settings" link
6. In the "Turn on User Account Control (UAC) to make your computer more secure" click to unselect the "Use User Account Control (UAC) to help protect your computer". Click on the Ok button.
7. You will be prompted to reboot your computer - do so when ready
You may need to uninstall/reinstall Reader after the reboot in order for the problem to go away, but that part I am not certain of. Try to duplicate the issue prior to taking that step.
If you are unable to resolve issues with Adobe Reader, I recommend using a different reader that has much less bloat and is updated regularly:
http://www.foxitsoftware.com/pdf/reader/
FoxIT is a FREE alternative to using Adobe's Reader. Support for free Adobe products is limited forums such as this. The same holds true for open source alternatives except the manufacturer usually helps support their forums while Adobe doesn't monitor this forum or any like it. I know how important it is for you to focus on your classes so don't beat your head against a wall just because Reader won't work when a viable solution exists.
Best of success in your pursuit of knowledge!
Michael
> -
Hello, I need help with my macbook pro.
It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
I am running Lion 10.7.3.
Regards,
Nicolas.
(I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS. -
Need help with my Pioneer dvd-rw dvr-115d. HLEP!!
Hello i need help with my G4, i havent been useing it for a while and i started using it again. As i was trying to burn a DVD it didnt read my cd at all even if i put a DVD in there it dont read it just come right back out.. on my mac it shows that is there but not reading . what can i do????!!! i need help with this..
PIONEER DVD-RW DVR-115D:
Firmware Revision: 1.18
Interconnect: ATAPI
Burn Support: Yes (Vendor Supported Drive)
Profile Path: /Library/DiscRecording/DeviceProfiles/PatchBurn-pioneerdvdrwdvr115d.drprof ile
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds
this is what it say in the system profiler.
Power PC Mac os x 10.5.8The new user account didn't work?
Or, the firmware flash didn't work?
I would try reconnecting the data ribbon. It is cramped and difficult to get to, but it may be some corrosion or a poor connection causing the issue.
It's worth a try, as the DVR-115 is a good drive. They don't make them any more........
You can find an optical drive installation video (on the following page) to help you with your efforts:
http://eshop.macsales.com/installvideos/ -
Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questionsAll the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer. -
Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.
Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.
-
I think I need help with driver (software) settings for D110a
I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05) -
I need help with fp, i cannot get it to work. have tried everything
i cannot get fp to work. I have uninstalled and installed so many times. I use IE9....it worked two months ago.
thank you for your reply. I am using Internet Exp. 9 and McAfee software. It states it installs and when I open a video, receive message I need to upgrade. I followed the directions for 32 bit vs 64 bit. Adobe FP is under my programs????
> Date: Thu, 8 Sep 2011 05:17:21 -0600
From: [email protected]
To: [email protected]
Subject: I need help with fp, i cannot get it to work. have tried everything
It won't work or just won't install?
Which OS, browser(s), and anti-virus software are you using?
If you're using the free Avira AntiVir(us) Personal software, then deactive the Webguard feature first before installing the Flash Player.
> -
I need help with activating Adobe MC CS4
Good day! I need help with activating Adobe MC CS4. Recent installation was not deactivated.I have Adobe License Certificate ID and other data and can provide it. Now activation not accept serial number provided in certificate.
What message do you get when the serial number is not accepted?
-
HT204406 Hello, I need help with my iTunes match
Helo, I need help with iTunes Match.
I signed up for iTunes match. It did its thing and now it is supposed to have every one of my songs in the cloud.
I checked for Ring my bell (Which I purchase from iTunes) and it is not on my iTunes on my computer anymore?
I did match to give my 4S with limited memory and over 400 songs the ability to put all songs in the cloud, then by connecting to my computer, somehow I can tell my phone to not sync with match, the re sync and all the songs would be deleted from my phone and then I could down load any songs I wanted on my phone, thus giving me a bunch more memory. I could not figure out how to do this?
Can you please help me. Thank you.You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS. -
I need help with Indesign.
I am working on a book project using Indesign 1.5. I have got a new computer. Installation of the Indesign software was problem free but when i open my book project i have a problem that i can not figure out.
When i put the marker in the middel of a text and pressing the enter tab, to move it down a line, the text after the marker disappear and a red + showing at the bottom of the text box.
I will appresiate it a lot if anyone can give me help with this set up problem!Try pressing the primary Enter key to the right of the Home Row, not the Enter key in the number pad. If that doesn’t work, look at your paragraph spacing options wherever the paragraph formatting is in that version. Space Above or Space Below might be set too high.
In the future, please both use a more appropriate subject line and provide your platform. This forum is for people needing help with InDesign, so “I need help with Indesign” is just as helpful as leaving the subject line blank. We’re here to help you.
Maybe you are looking for
-
I created an Excel template which includes VB and macros as an EXCEL.XLTM template file (I used a template file to keep users from overwriting the sample template file), but I have noticed that when users save the template, Excel 2010 defaults to sav
-
How can I unlock the print settings
I'm so angry at adobe ebooks. I have had to buy an ebook for a course I'm doing at university, because my library doesn't have, my campus book store doesn't have it, and I cannot find a hard copy in any of the book stores in my area. My lecturer has
-
Why can't I import mpg files to convert to .mov files?
why can't I import mpg files to convert to .mov files?
-
Is there a deployment guide for Skype version 6 similar to what has been provided with previous Skype versions such as 4.2? We are wanting to know if we have the ability to configure settings within our SCCM install package of Skype like we've done
-
Hi, I try to capture a custom image but at the end of the process, I get the following error (see attached image): ZTI ERROR - Unhandled error returned by ZTIWindowsUpdate: ActiveX component can't create object (429) Could someone help me to solve th