Need help with screen sharing/VNC

I can't seem to get screen sharing to work. I got my dad an iMac this Christmas and thought I could help him learn it with screen sharing. Not going so well. I tried experimenting with a friend's Macbook and I was able to screen share when we were within wireless range via iChat and Bonjour. But when more remote, the "share screen" icon on iChat is grayed out. My friend tried setting up an AIM account (v 4.7 I think) and we still can't screen share.
So I tried the VNC option with my dad's computer. I went to Finder >Go >Connect to server >entered vnc://Dad's IP address and got the message that it couldn't be found.
All three of the computers in this message have screen sharing turned on, firewall set to accept anyone, and have 10.5.1. We all use DSL modems (from the phone company), connected wirelessly; and I'm the only one with a dot Mac account.

2 ideas
The DSL modems that are provided by my Telephone Company (Centurytel) are all Westell and Netopia routers. The phone company calls them modems, but they are actually routers with a built-in NAT firewall. This means you have to set up port forwarding for VNC to work. The TCP ports to forward are 5500,5800,5900. VNC doesn't use UDP.
If you are both using Leopard, then the free .mac account takes care of the port forwarding problem, and also finding the other party's IP number (the .mac id continues to work for iChat even after the 60 day trial). You both login to .mac, start the chat, and then request to share screens. It's working so well for me that as soon as the 400mb 1.5.2 update becomes available I will start moving my clients over to Leopard

Similar Messages

Need help with session sharing in WebCenter Portal

Hi, How can I share session between a WebCenter Portal application and the portlets it is consuming?
Basically I want this for authentication. In the portal framework application, I'm setting a user object in the session, How can I get the object in a portlet?
Regards,
Navaneet

IN the second page, you have to make sure that the session
has been started.
Put this at the very top of the page -
<?php if (!isset($_SESSION)) session_start(); ?>
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Alidad" <[email protected]> wrote in
message
news:g184i4$jgf$[email protected]..
> have created a login page (php/mysql) with username and
password boxes.
> when
> the form is submitted the mainpage loads up.
>
> i want the main page to be specific to that user, so i
want their name to
> appear in the first line. eg.. Welcome back 'David'
>
> I read a tutorial in the past that tought me to send the
users id in the
> URL
> and then create a record set on the mainpage that was
filtered by the URL
> parameter.
>
> I have forgotten how to do this and the tutorial is no
longer available on
> Adobe's site.
>
> I tried that with
> $_SESSION['MM_Username'] = $loginUsername; \\ in first
page then
> echo $_SESSION["MM_username"]; \\in second page, but
> the
> problem is that is not showing user name.
>
> i need help with that please!
>
> can anyone tell me how to do this? Thanks in advance,
>
> AM
>

Need help with family sharing :(

i cannot see the purchases of my other family member in my app store , need help please

Hi eldad1981,
Thanks for visiting Apple Support Communities.
It sounds like you have set up Family Sharing but you don't see any of your family's shared content.
This article has several troubleshooting tips that can help resolve this situation:
If you don't see your family's shared content
All the best,
Jeremy

Need help with screening possible applicants

Hi, I am have great difficulty determining a candidate that can handle a consulting assignment I am looking to fill.
I was hoping to get a few questions or ways to screen through folks, everyone is saying they can do it but when put infron of client are all failing and I really want to do good work.
I am told that all are failing in one area.
I need someone that knows about UI can integrate OBIEE with another user interface, can customize it etc.
for example one task is to integrate OBEII without OLTP application.
With this is there some questions I can use to make sure applicant can truly do this job.
They only have OBIEE in test lab, and are moving it into production.
Any help would be greatly appreciated, thanks in advance
Randy

customizing the UI is always very hard to budget!! Because you can't know how long you are taking about something.
What I know out experience that it is always very expencive to get EXACTLY what you want.
If you only want to see your housestyle back in OBIEE, then you can do that in a couple of days, but also in a couple of week. Depending on how precize everything has to be...
But if I understand you correctly, you have to hire someone to do the job? Why don't you do it fixed price? Just say, I give you this amount of money, will you do that for me!
If someone don't have the skills then he won't do it! ;)
Hope this is a good idea for you..
When you can do everything from remote, then I maybe know someone in holland who can do the job for you (however it's a concurrent of my, but I don't care about that ;))
best regards,
Remc0

Need help with screen zoom please

I just upgraded from Tiger to Leopard. When I had the old Tiger software installed, I was able to zoom in and out on my screen by holding down the Control key while scrolling with my mouse. But since I installed Leopard (not Snow Leopard, since I am using a G5 Tower PowerPC), this key combination no longer works. This former screen zoom feature is important to me because I am a graphic designer with a neurological condition (tremors in my hands) that makes selecting fine points in graphic applications (like Illustrator) difficult unless I zoom in to make selection points larger and more manageable. Note: using Illustrator's magnifying glass feature does not help me, because the select points still stay small when I magnify and image, but using the old screen zoom method made the points larger and easier for me to select. Can anyone help me?
F.Y.I. I also updated my trackball drivers as well, but my trackball preference settings did not change.

Thanks for your input. I hear what you are saying. I have found a couple of applications that worked better with my old Tiger system than with Leopard. When I contacted the developers of these mis-behaving apps, I learned that while Intel machines seem to have no problem with their app's Leopard updates, they do report problems with those of us who still use our old big honking tower PPC's. Maybe that is what I am experiencing here.

Buying a new Mac Pro, need help with Screen

Hello everyone, Im getting a Mac Pro, and I need a good lcd monitor to go with it. At the same time I would like to be able to have a LCD screen in my room to watch tv. Is it possible to watch tv with the Apple displays, any other displays or should I buy a LCD TV that has capabilities to be connected to a computer. I read a post that suggested a Dell screen to somebody for the purpose of watching tv.
Please any advice would be appreciated.
Gonzo

Elgato <http://www.elgato.com> lets you watch a record TV programs on the Mac's screen.
There are some non-Apple monitors with video, as well as DVI inputs. Some even contain TV tuners and speakers.
Some TVs can be used as computer monitors but there are potential problems:
Low resolution
Overscan (menu bar and dock off the screen)
Computer display not filling screen
Non-square pixels
Interlacing

Need help with printer sharing over ethernet

I'd like to share the printer hooked up to my Mac Pro via USB with a MacBook in the same room. The MacBook is connected to my Mac Pro via ethernet cable (no router or switch; just a direct connection).
I have enabled "Printer Sharing" on my Mac Pro.
However, I'm not sure what to do from here. When I open up "Network" in System Preferences, and click on "built-in ethernet" it says "inactive". When I go to "Print and Fax Preferences" and attempt to add the printer connected to the Mac Pro, nothing shows up.
I know I'm not understanding a key point here. If you could help me out I'd appreciate it. The goal is to allow the MacBook to use Airport to connect to the Internet, but to have access to the USB printer connected to my Mac Pro via ethernet (long story why this is necessary, but it is.)
Thanks.

Thanks for your offer to help.
The printer is indeed connected to my Mac Pro via USB and is working perfectly.
As I stated in the original post, printer sharing is enabled in System Preferences on my Mac Pro. There is an ethernet cable going from the ethernet 2 port of my Mac Pro to the ethernet port of my MacBook.
The missing element was that I had not established a network connection between the two Macs. From the Macbook's Finder I chose "Go>Network" and then selected my Mac Pro. After I entered my username and password, I was connected to the Mac Pro.
At this point I was then able to see the USB printer connected to the Mac Pro in the MacBook's "Print & Fax preferences".
However, I still have one problem. When I add the printer on the MacBook, it chooses "generic postscript driver" even though I have recently installed the proper driver on the MacBook. Why would this be the case?

Need help with account sharing and email

I'm an inexperienced Mac user with a G5, dual 2.0 processors and 1.5 meg ram. Just installed iLife 05 and having an iPhoto problem. My spouse and I have separate user accounts on the same pc. We'd like to share our photos with one another (they're actually the same photo's). On my account, iPhoto email is "mail", no problem. On hers it displays Entourage. I can't change it from preferences pane. Greyed out. On my account it shows America on line but the email icon is "mail" Can you help. We both want "mail"
What is the proper way to share this account? Do we check preferences and share or do we go to the User accounts and move the photo library? Please provide a basic explanation to one who is not really familiar with the workings of a Mac. That's why I went to a Mac in the first place. It just generally works.
Thanks in advance.
Al

The iPhoto sharing that was in the previous version doesn't seem to exist. There is now iCloud Photo Sharing.
http://support.apple.com/kb/HT5902
I don't know about the file sharing issue.

Two PC's Connected to WRT54G -Need Help With File Sharing Folder

Hi,
I have both PC's connected to the WRT54G with internet access on. How do I create file sharing and or a folder named "shared" on each desktop that allows each PC to drop files in this folder so that each PC can open and access those files?
Jerry

For File and Printer Sharing follow this link

Need help with File Sharing and iPHOTO Library sharing........

I recently upgraded my imac and my macbook pro to Mavericks.
I have some problems now.
Previously using iPHOTO when running I was able to see the other computers iphoto library on the left side bar. I was able then to access the other computers iphoto library. This is no longer showing the other computers library from either computer.
When I try to access the other computers files using file sharing I get a message that permisions are missing.
It then asks if I want to fix permisions , I say yes....it will run for an hour and do nothing...I need to force quit.
I really dont want to use the cloud to do this sharing....why should I upload into the internet when I have the computers on same network.
Is there any place I can go to find how this is now done? Before I didnt need to look up a thing....was just intuitive . Now Im running into walls every way I try to share the iphoto libraries across computers.

The iPhoto sharing that was in the previous version doesn't seem to exist. There is now iCloud Photo Sharing.
http://support.apple.com/kb/HT5902
I don't know about the file sharing issue.

Need help with shared hyperlinks

I need help understanding the shared hyperlink option when creating hyperlinks in InDesign CS5 (Mac) and how to change a shared hyperlink destination.
I want to build a document that contains hyperlinks to files on the client’s server. The end use is to make a PDF in which the client can click on a hyperlink and it opens (for example) a Word document or another PDF on their server. When I started the project, I thought I would create shared hyperlinks because a single server document would be referred to by several links scattered through the InDesign document I was building.
From the Hyperlink palette fly-out menu I chose New Hyperlink, then Link To: File from the dropdown, and I clicked the Shared Hyperlink option, and then OK to close the window. I export the InDesign file as a print PDF, and the hyperlinks work.
Now I need to change the file paths, because the client moved their files to a new location. When I re-open the hyperlink in the Hyperlink palette by double clicking on it, the Edit Hyperlink window opens but it shows my link as:
Link To: Shared Destination (rather than File)
And the destination box underneath shows:
Document: [my document name]
Name [the file path I put in]
However, this link is not editable. I don’t understand why InDesign does this on its own.
I realize now that it was not necessary to tick the shared option when I built the hyperlink. Is there a way (a script? another method?) that I can remove the shared nature of the hyperlinks so that when I go to edit them they show as links to files (Link to: File, not Link to: Shared Destination) with a live Destination Path box where I can edit the link?
(If anyone tries to help with a script, note that my document also contains other hyperlinks to internet URLs and emails that I don’t want to disturb.)
Thanks for your consideration.

Well. I do feel sort of bait-and-switched, but...
I want to get the links back to the point where double clicking on the hyperlink name (number) in the Hyperlink palette opens an Edit Hyperlink dialog where the destination is Link to: File and the file path shows up in the File Path box as an editable string. Just the way I made them in the first place.
It's good that you're comfortable editing the IDML.
If you compare links made both ways in the IDML, the only distinction between the Shared and the not Shared seems to be the hidden attribute of the <HyperlinkURLDestination/> tag.
Allegedly you cannot edit this in Javascript (though you could, I suppose, create a new HyperlinkURLDestination with all the same properties and then chang eeach hyperlink to point to it).
But editing it in the IDML works fine. Open designmap.xml and change the Hidden="false" to Hidden="true". Of course, you only want to do that in the <HyerplinkURLDestination/> tags...
Something about this seems fishy to me, so you might want to verify it yourself in a single case before you put too much effort in. But I think it's right.

I need help with my K7N2G-ILSR Black screen

hey!
I need help with my Mainboard!
All the time when i want to start it it doesn't boot. You can listen to the noise of the fan and it is working but only black screen, also the LED says that the Ram is damaged red-green-red-red!
I have an Athlon XP 2400+
Volcano 9 Fan
512MB ram Kingston PC2700
512MB Ram Infineon PC2700
I read that the board doesn't support Kingston the first time and also i set the jumpers cleared CMOS and put the battery out. Also I put the Ram in different Dimms but still the same error.
The other things what i have aren't really important just that i have an enermax 431Watt. MSI wrote me that i have to put out the mainboard out of the case but why should i do this, the case is open right now and normally that shouldn't change anything. I read also some posts here and about new Ram but maybe there is someone who knows whats going on!
thanks for the reply to everyone
Regards
Jan(It's german say it like Yan)

i can't even look on the screen because the screen is black, and how can I change the timings manualy from ram? man, i never heard about that I mean it's easy to overclock a cpu but how are you changing the timings of the Ram! If u can give me a webpage snf i will lock for it, or just descibe me how to do it, thanks a lot for the replies!

TS2771 I need help with my camera it's shows a black screen. And I have restarted it many times

I need help with my camera it's shows a black screen. And I have restarted it many times

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Y are not alones. Sometimes the camera fails.
Apple Retail Store - Genius Bar

I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in?

I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.

Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Need help with Template - unbalanced #EndEditable tag

I am unable to use this template to create a new page and get the "unbalanced #EndEditable tag" error.
If I open the file independently it looks great - otherwise I get the error.
Code for internal_students.dwt
There is an error at line 45, column 79 (absolute position 2188)
<div id="metanav">
<p><a href="../Library/contact/index.html">Contact Us</a></p>
</div>
        <div id="navigation">
            <div id="navigation_l">
                <div id="navigation_r"> <ul>
                        <li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
                        <li><a href="../about/index.html">About</a></li>
<li><a href="../news/index.html">News And Events</a></li>
<li><a href="../educators/index.html">For Educators</a></li>
<li><a href="../students/index.html">For Students</a></li>
<li><a href="../industry/index.html" class="last">For Industry</a></li>
                    </ul>
</div>
I need help with this as the site and templates were created 2/3 years before I arrived on the job.
Thank you
Cheryl

Okay
- This is on-line page http://caite.cs.umass.edu/students/index.html
If you want code from template here it is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />

<title>CAITE - Commonwealth Alliance for Information Technology Education</title>


<meta name="Description" content="Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy" />
<meta name="Keywords" content="Commonwealth Alliance for Information Technology Education CAITE Massachusetts women minorities information technology IT" />
<meta name="robots" content="all, index, follow" />
<meta name="revisit-after" content="14 days" />
<meta name="author" content="Outreach Web Team" />

<link rel="shortcut icon" href="/images/favicon.ico" />
<script type="text/javascript" src="../scripts/jquery.js"></script>
<script type="text/javascript" src="../scripts/jquery.easing.js"></script>
<script type="text/javascript" src="../scripts/jquery.pngfix.js"></script>
<script language="JavaScript" type="text/JavaScript">
    
</script>
<link href="../css/screenstyle.css" rel="stylesheet" type="text/css" media="screen" />
<link href="../css/printstyle.css" rel="stylesheet" type="text/css" media="print" />
</head>
<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<body>
    <div id="wrapper">
        <div id="metanav">
<p><a href="../Library/contact/index.html">Contact Us</a></p>
</div>
        <div id="navigation">
            <div id="navigation_l">
                <div id="navigation_r"> <ul>
                        <li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
                        <li><a href="../about/index.html">About</a></li>
<li><a href="../news/index.html">News And Events</a></li>
<li><a href="../educators/index.html">For Educators</a></li>
<li><a href="../students/index.html">For Students</a></li>
<li><a href="../industry/index.html" class="last">For Industry</a></li>
                    </ul>
</div>
                
            </div>
       </div>
        <div id="wrapper_l">
            <div id="wrapper_r">
                  <div id="innerwrapper">
                    <div id="internalBanner-print"> <h1>Commonwealth Alliance for Information Technology Education (CAITE)</h1></div>
                    <div id="internalBanner">
                      <div class="students-banner">
                        <table width="100%" border="0" cellspacing="0" cellpadding="0">
                          <tr>
                            <td width="125" height="188" align="left" valign="top" id="homeImage"><img src="../images/logo_vertical_small.png" alt="CAITE" width="105" height="188" /></td>
                            <td align="left" valign="top" id="internal-banner-quote"><div id="internalQuote">
                                <div id="internalQuote-inner">
                                  <p>CAITE designs and carrys out comprehensive programs that address under-representation in information technology (IT).</p>
                              </div>
                            </div></td>
                          </tr>
                        </table>
                    </div>
                    </div> 
                    <div id="internalContent">
                        <table width="100%" border="0" cellspacing="0" cellpadding="0">
                          <tr>
                            <td width="317" align="left" valign="top" id="secondary-content">
                              
                              <h3><a href="../students/index.html">For Students</a></h3>
                              <div id="secondaryNav">
                                <ul>
                                  <li><a href="http://www.takeITgoanywhere.org" target="_blank">TakeITgoanywhere.org</a></li>
                                </ul>
</div>
                            </td>
                            <td align="left" valign="top" id="contentCell">
                              <h1>For Students</h1>
                              <p>The University of Massachusetts Amherst is leading a Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy; that is, economically, academically, and socially disadvantaged residents.</p>
                              <p>The project will pilot a series of outreach programs supported by educational pathways in three regions (one rural, one suburban, and one urban). The project will include work with high school teachers, staff, and counselors. CAITE will identify best practices and disseminate, deploy, extend and institutionalize these best practices statewide and nationally.</p>
                              <p>Community colleges are the centerpiece of CAITE because of the central role they play in reaching out to underserved populations and in serving as a gateway to careers and further higher education.</p>
                              <p>This project will build a broad alliance built on its leadership in and partnership with the Commonwealth Information Technology Initiative (CITI), the Boston Area Advanced Technological Education Center (BATEC), regional Louis Stokes Alliances and NSF EGEP programs, and other partnerships and initiatives focused on information technology education and STEM pipeline issues</p>
                              <p> </p>
                            </td>
                          </tr>
                      </table>
                    </div>
                    <div id="alliances">
                          <table width="100%" border="0" cellpadding="0" cellspacing="0">
                            <tr>
                              <td height="30" align="left" valign="top"><h2><a href="../about/alliances.html">Alliances</a></h2></td>
                            </tr>
                            <tr>
                              <td align="center" valign="middle"><p>
<table border="0" cellpadding="2" cellspacing="0">
                                <tr>
                                  <td width="35" align="center" valign="middle"> </td>
                                  <td align="center" valign="middle"><a href="http://www.citi.mass.edu/" target="_blank"><img src="../images/logo_citi.jpg" alt="Citi" width="65" height="50" border="0 /"></a></td>
                                  <td align="center" valign="middle"><a href="http://www.batec.org/index.php" target="_blank"><img src="../images/logo_batec.jpg" alt="BATEC" width="69" height="46" border="0" /></a></td>
                                  <td align="center" valign="middle"><a href="http://www.nsf.gov/index.jsp" target="_blank"><img src="../images/nsflogo.gif" alt="NSF" width="64" height="65" border="0" ></a></td>
                                  <td align="center" valign="middle"><a href="http://www.nelsamp.neu.edu/" target="_blank"><img src="../images/nelsamplogo.gif" width="100" border="0"></a></td>
                                  <td align="center" valign="middle"><p><a href="http://mysite.verizon.net/milnerm/" target="_blank"><img src="../images/umlsamp.png" width="85" height="63" border="0"></a></p>                                  </td>
                                  <td align="center" valign="middle"><a href="http://www.neagep.org/index.asp" target="_blank"><img src="../images/nealogo.gif" border="0" ></a></td>
</tr>
                              </table>
</td>
                            </tr>
                      </table>
                    </div>
                </div> 
            </div>
        </div>
        <div id="bottom">
            <div id="bottom_l">
                <div id="bottom_r"> </div>
            </div>
        </div> 
    </div>
    <div id="copyright">
<p>Sponsored by CAITE an NSF CISE Broadening Participation in Computing Alliance<br />
© copyright 2008 <a href="http://www.umass.edu/" target="_blank">University of Massachusetts, Amherst</a></p>
<font color="#666666"><br>
</font>
<p><font color="#666666" size=2> This material is based upon work supported by the National Science Foundation under Grant No.s NSF-0634412 and NSF-0837739. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.</font> </p>
</div>

<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<script type="text/javascript">
try {
var pageTracker = _gat._getTracker("UA-7435501-1");
pageTracker._trackPageview();
} catch(err) {}</script>
    </body>
</html>

Need help with screen sharing/VNC

Similar Messages

Maybe you are looking for