Need help with sending email notifications via OEM

Hi Folks,
Objective: To setup email notification if the listener or the database instance goes down
Version: 10 g Rel 2
I have setup the email from OEM. I have verified the configuration by successfully sending myself test emails.
I have configured the schedule (7 days a week, from 1 A.M to 11 P.M)
I have also configured the out-of-the package alerts so that I will be notified if the listener goes down
However, once I manually stop the listener, no email is sent out?
Can somebody spot any obvious steps that I might have missed? Or if somebody can suggest any debugging steps that might help to resolve the issue ?
Thanks in advance.
rogers42

Hi Roger
Ok, tell me
1. You have a user like DBA and configurate this count for recive email?
2. When You try send email from Console You recive this email? Your prove server email
You should recive this mensagge
Este mensaje de correo electrónico de prueba de Oracle Enterprise Manager indica la configuración correcta de la dirección de correo electrónico y del servidor de correo.

Similar Messages

Need Help of Sending Email Notification when new task assigned

Hi all,
How can we send a email alert notification for existing lead or new lead, when a new Task is assigned to particular person. Here in my requirement daily n number of tasks assigned to executives. So how can i send the same.
Thanks in advance.
Regards,
Ratan

Hi Ratan,
It is not clear from your question whether you are trying to trigger the email notification for the task or the lead, but it doesn't matter. You'll need to write a WF for the Lead/Task and trigger it when a new record is created and then in actions select the email notification.
Best of luck

My question disappeared - need help with sending email - option is not there

can not send email from blackberry from my aol or hotmail accounts. I can send from my work email .???

Didn't disappear, it's right here, and answered.
no option to send email on aol or hotmail
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Need help with sending Emails... My AOL Account from Apple Mail

I have no problem receiving emails on this account through my apple mail setup but for some reason the sending mail continues to give me issues... it says that my "smtp.aol.com...." server is timed out. Why is it not able to send but is able to receive? what can i do to alleviate this situation?
Please advise!
Thank you!
<Post Relocated by Moderator>

Alexisann, Welcome to the discussion area!
I'm not sure how you ended up in the "Discussions > AirPort > AirPort for Windows" discussion area. Your question has nothing to do with Apple's wireless base stations, wireless networking, nor Windows.
A much better place to put your question would be the "Discussions > Mac OS X v10.5 Leopard > Mail and Address Book" discussion area.

**New** Need help with your email?

If you’re forgotten your password (it’s so easily done), you need help setting up your email or you’re having problems with your email account please follow the step by step instructions to get help setting up and fixing any email issues you’re having.
Simply answer a few questions about your email account and what you need help with, and we’ll help with the rest.
Each step includes a helpful picture to keep you right.
We’d love to get your feedback on whether this helped you so please post on this board to let us know how you got on.
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

- Go to Settings>iTunes and App Stores and sign out and sign into update/new account.
Note:
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

Need some help with: implement email notification on note board within a page layout (javascript)

Dear all,
I have a quite specific issue in which I'm in need of some guidance and help!
Within our SharePoint I have created a custom page layout. This is a simple page to post some content (news) and a standard Note Board is implemented.
Every time a news item is placed, this is done by our communication departement, this page with standard layout is placed as a page in a page library. When there are no comments on that particular item/subject I found a solution to replace the standard SharePoint_no_posts-text
by placing a contenteditor web part in the Page Layout with a reference to a textfile with some javascript in it. This works perfectely.
The only thing left is that I want to automatically send an email to the contact (which is defined when making the news item) everytime someone posts a new comment. Here is where I need some help!
We don't really use mysites so I was wondering if someone could tell how I could do this by for example some code (javascript) which I can implement in the Page Layout.
Can anyone help me?
Thanks in advance,
Gr Matt

Try below code:
function sendMail() {
var link = 'mailto:?subject=insert subject line&body=';
var curntLoc=window.location.href;
link +=escape(curntLoc);
window.location.href = link;
// window.location.href = link;
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9cfe7884-fc9e-4c7c-a44c-f740d2edcafc/sending-email-using-javascript-in-sharepoint-2010
Also check below:
http://spjsblog.com/2010/06/16/send-email-with-javascript-with-the-help-of-a-workflow-in-a-dedicated-send-email-list/

I need help with an email WiFi sending problem on my iPad 2

I’m having an email WiFi sending problem on my iPad 2     Model: MC774C/A; IOS VERSION: 6.1.3 (10B329).
While I use 4 email accounts on the iPad -- Hotmail, Gmail, iCloud and ns.sympatico.ca ( a division of BellAliant) – the sending difficulty only relates to the ns.sympatico.ca. The settings for this account are:         pop.bellaliant.net            and      smtp.bellaliant.net
I first noticed the problem about 3 weeks ago while travelling across the country (Canada). (I do recall about that time there was an update of my IOS and I also for my wife purchased from the Bell store an iPhone which shares my Apple account.) Prior to that everything worked well for a couple of years.
I noticed earlier this month that the iPad received mail fine but would not send at night using the motels’ WiFi. During the day, using my 3G account, all worked fine. I phoned Bell but was told that my experience was normal so I thought no more about it until I returned home and found the same problem at the house. I called Bell again and worked for 2 hours with 3 Bell technicians who succeeded in getting the iPad to neither send nor receive and gave up advising me to take the iPad into a Bell store to have it looked at. I did that and the young technician got the iPad sending and receiving by changing the        smtp.bellaliant.net      to         mail.1xbell.ca
However, when I returned home again, I realized that it was working on my 3G and still doesn’t send on my WiFi
I’m looking for any suggestions that might solve this annoying problem?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Help with sending email from RoadRunner account on Mac, iPhone, iPad

Recently, I have had strange issues where suddenly I realize that I cannot send email using Mac Mail (Mac OS X 10.8.1). Its a very frustration condition where when everything was once fine, suddenly you stop being able to send email without what appears to be 'reason'.
Today I learned the reason, and I assume others might run into this as well, so I am posting the issue and solution:
Per Time Warner/RoadRunner support: "When on your home network, the SMTP server does not require authentication. When away from your home network, the SMTP server REQUIRES authentication"
That is what I believe to be a mistake on RoadRunner's part. Hundred of thousands of users will not understand that they need to change this setting anytime they go for a coffee at Starbucks.
So to help, here is what I have come up with:
From Mail -> Preferences, you need to edit your SMTP server list. Click the drop-down list next to 'Outgoing Mail Server (SMTP) and select 'edit SMTP Server List. Create two server connections and name one something that reminds you that it is the home network, and the other a roaming network. Set the home network server config to Authentication -> None. Set the roaming network server config to Authentication -> Password and fill in the username/password credentials.
Having both these servers available for you to select from will reduce the impact of this inconvenient requirement from RoadRunner.
.....Comcast.....please make service available in my area.....

Bradley,
You did it. I used your suggestion and solved what I hope to be the last of a very persistent problem.
I made both a home and away SMTP server setting on my iMail. I tested both and are working well.
Of all my research, your suggestion was the only fix to this problem. Now, I hope to be able to send email wherever I am instead of waiting until I am at a home network or worse, resorting to using my phone.
Thanks again!

Need help: Error sending Email from 6270

When I try to send a Email message using the handset in-built mail client, the following error is reported on handset screen-
Stop "String index out of range: -2" with only possibility of "Dismiss" button.
I have done the personal config settings for a local SMTP and POP server that does not use SSL since 6270 does not support it. I am able to retrieve emails, use browser but sending mail fails with the error above.
Please help since Nokia-Care replies are not worth mentioning here. Their service centre in Bangalore-India is pushing the issue to operator. But operator (Airtel) is not to blame. Airtel is not blocking access to the servers (local as well GMAIL) since I am able to access (send and recieve) these servers from Outlook-PC that connects via the USB cable to this handset. Either settings are not correct or it is a bug in 6270.
If anyone has been able to use 6270 to send emails, please send me your settings minus your passwords ofcourse. It will help me try again if I missed something.
Thanks in advance
Anupam

Hi all,
I am also sharing the settings that I did on the handset. BSNL server does not use a secure connection. I had used "@" in the settings but in test below it is shown as
" AT " for preventing spam.
Let me know if you have any sugeestion.
Anupam.
Settings -> Configuration -> Personal Config. settings ===
@My bsnl
Account Name: My bsnl
My name: Anupam
Email Address: anupams_blr AT dataone.in
Include Signature: No
Reply to address: anupams_blr AT dataone.in
SMTP secure login: Disabled (Have also tried other 3 options)
SMTP user name: anupams_blr AT dataone.in
SMTP password: ********
Outgoing SMTP Server: smra.sancharnet.in
Outgoing SMTP port: 25
Use preferred access point: Yes
SMTP access point: (grayed out)
Incoming server Type: POP3
Incoming mail settings:
Retrieve emails: 30
POP3 secure login: Disabled
POP3 user name: anupams_blr AT dataone.in
POP3 password: *******
Incoming POP3 server: smma.sancharnet.in
Incoming POP3 port: 110
Use preferred access point: Yes
POP3 access point: (grayed out)
=======================================================

Help with sending emails to multiple users.

Currently we have a process to send mail to muliple users by looping through the list of users and sending each individual an email
<Action id='1' name='sendEmail' application='com.waveset.provision.WorkflowServices'>
<Argument name='op' value='notify'/>
<Argument name='template' value='$(template)'/>
<Argument name='toUser' value='$(tuser)'/>
<Argument name='catch' value='notificationException'/>
</Action>
The variable tuser contains a single email address.
Is there any way to setup tuser to contain multiple email addresses?
I have tried passing a list and a string separated by colons (ex: <s>[email protected]; [email protected]</s>) and neither one works.
Question 2
Is it a bad idea to try and send email to up to 50000 users at once using IDM? Besides the fact that I would need to search for specific users and get their email addresses based on their capabilities.

Hi,
For sending emails to multiple users, use to instead of toUser. Put the names in comma seperated values
<Action id='0' application='com.waveset.provision.WorkflowServices'>
<Argument name='op' value='notify'/>
<Argument name='template' value='$(template)'/>
<Argument name='to' value='$(to)'/>
<Argument name='cc' value='$(cc)'/>
<Argument name='catch' value='notificationException'/>
</Action>
You can use IDM to send emails.
it will be a good idea to break down the email that you are sending into groups/batches. If possible, you can send email to DL s
Else, you can segregate the users based on roles and send emails. This will reduce the load. Hope it helps
Regards
Arjun
Edited by: arjun.sengupta on Dec 4, 2012 3:26 AM

I need help with send a gift though iTunes without a credit card

I need help send a iTunes gift card on iPhone though iTunes Store without a creid card

That's not possible. Apple doesn't allow iTunes Store credit to be spent on gifts.
(126618)

Need help for sending email s

Hi
I have written a procedure for send an email notification to others.(within org). procedure successfully compiled. When I execute this procedure..I am getting email like this...!!! Every thing coming in the subject line only. Please advise..!!
test From: [email protected]: 15-DEC-2011 02:06:29To:
[email protected] Hi Rekha
test -- subject
Hi Rekha -- body
CREATE OR REPLACE
PROCEDURE xxgw_email_notf(p_mail_subject IN VARCHAR2,
                          p_mail_bdy IN VARCHAR2,
                          p_mail_body in varchar2,
                          p_from_email in varchar2,
                          p_to_email in varchar2)
is
L_MAILHOST varchar2(64) := 'something.local'; -- for security purpose I have given like this.
L_FROM varchar2(64) := P_FROM_EMAIL;
l_to VARCHAR2(64) := p_to_email;
l_mail_conn UTL_SMTP.connection;
--l_subject           VARCHAR2(100);
begin
l_mail_conn := UTL_SMTP.open_connection(l_mailhost, 25);
UTL_SMTP.helo(l_mail_conn, l_mailhost);
UTL_SMTP.mail(l_mail_conn, l_from);
UTL_SMTP.RCPT(L_MAIL_CONN, L_TO);
--UTL_SMTP.data(L_MAIL_CONN,'Hi Testing');
--UTL_SMTP.DATA(L_MAIL_CONN,'Sahithya Just test now');
UTL_SMTP.OPEN_DATA(L_MAIL_CONN);
--UTL_SMTP.WRITE_DATA(L_MAIL_CONN, 'Subject: '||P_MAIL_SUBJECT||CHR(13));
--UTL_SMTP.WRITE_DATA(L_MAIL_CONN, 'From: '||P_FROM_EMAIL||CHR(13) );
--UTL_SMTP.WRITE_DATA(L_MAIL_CONN, 'Date: ' || TO_CHAR(sysdate, 'DD-MON-YYYY HH24:MI:SS')|| Chr(13));
--UTL_SMTP.WRITE_DATA(L_MAIL_CONN, 'To: '||P_TO_EMAIL||CHR(13) );
--UTL_SMTP.WRITE_DATA(L_MAIL_CONN, ''||CHR(13));
UTL_SMTP.WRITE_DATA(L_MAIL_CONN, P_MAIL_BDY||CHR(13) );
UTL_SMTP.write_data(l_mail_conn, p_mail_body||Chr(13) );
UTL_SMTP.close_data(l_mail_conn);
UTL_SMTP.quit(l_mail_conn);
EXCEPTION
WHEN utl_smtp.PERMANENT_ERROR THEN
fnd_file.put_line(fnd_file.log,'Permanent Server Error');
dbms_output.put_line('Permanent Server Error');
WHEN UTL_SMTP.TRANSIENT_ERROR THEN
fnd_file.put_line(fnd_file.log,'Transient Server Error');
dbms_output.put_line('Transient Server Error');
WHEN UTL_SMTP.INVALID_OPERATION THEN
FND_FILE.PUT_LINE(FND_FILE.log,'Operation is invalid');
DBMS_OUTPUT.PUT_LINE('Operation is invalid');
end xxgw_email_notf;Please advise me where I did mistake..!!!
Regards
Sa

Hua Min,
No offence, but can you please stop posting everything in blue Times New Roman font, especially when it's code, as it makes things difficult to read (especially on some browsers)
Please read {message:id=9360002} and post code/data using the appropriate {noformat}{noformat} tags.

I need help in sending a picture via message on iphone 5

I am experiencing a problem with sending a picture that I just took. I have the option to message/mail/facebook.. etc, the photo. I select message and enter a recipient, the phone freezes and the screen must be exited to get the phone to work again. Is anyone else having this problem and what is the fix?

Do you have Settings > Messages > MMS Messaging set to "On"?
Are you all set up with your cellular carrier to use MMS Messaging?

Need Help for Sending Email with LabWindows 8.5 or 9

Hi,
I'm trying to send an email with attach excel files to it using InetSendMail function and outlook activeX and always having no success on it.
I am still a student so i dont have much time for researching these functions, so im asking for an example working code for this problem.
Thanks for your the help in advance...
I've also tried changing the examples from the package
Solved!
Go to Solution.

Hi,
You can use LaunchExecutableEx to determine the window state:
LaunchExecutableEx ("command.com /C calc.exe", LE_HIDE, NULL);
Beware that this function does not wait for the started executable to exit.
It executes the command in the string and continues.
If your application has to get the results of the call, then you need to get the application handle (3rd parameter, put a variable instead of the NULL above) and call ExecutableHasTerminated in a loop to find out if the execution finished.
Read carefully the help for the LaunchExecutableEx function and Handle parameter.
To get the result of the command line call, you can add a "> output.txt" parameter to the end of your command line call.
This way all the text output of the command is written to the output.txt file, from which you can read the result.
Check the command-line email sender program's help if there is a special paramter to make it more "verbose".
Hope this helps,
S. Eren BALCI
www.aselsan.com.tr

New Oracle DBA - Need help with backup & restore procedure via RMAN

Hello everyone,
I've been a SQL Server DBA for 12 years now, but new to the Oracle space. My first assignment at work was to refresh our training environment with production. So with that said, I took a full backup of our production database via RMAN and backed up the Control File. I then copied both the Control File and full backup from our production environment to training. I followed the procedures listed in the URL below:
http://www.dba-oracle.com/t_rman_clone+copy_database.htm
I then connected to RMAN and executed a 'show all' which is as follows:
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
The CONFIGURE CONTROLFILE AUTOBACKUP was set to ON but received a message that the database needed to be mounted, so, I mounted the database and made the changes, but when I shutdown the database and performed the startup nomount again, the settings were gone. Are these settings valid only when the database is mounted? How can I successfully refresh this training environment with production data? I'm at a standstill here so any help would be very much appreciated.
Thank you,
Pete

The CONFIGURE CONTROLFILE AUTOBACKUP was set to ON but received a message that the database needed to be mounted, so, I mounted the database and made the changes, but when I shutdown the database and performed the startup nomount again, the settings were gone. These settings are persistent settings.So these information retain in control files.To reading information from control files database instance must be MOUNT or OPEN stage.Due to you have mount instance and try SHOW ALL command through RMAN.
Are these settings valid only when the database is mounted? Not only MOUNT also OPEN stage.
How can I successfully refresh this training environment with production data? I'm at a standstill here so any help would be very much appreciated.
There are several ways like duplication.But you take full backup from production database using BACKUP DATABASE through rman.In this case you will get also AUTOBACKUP for controlfiles/spfiles.Then copy these backup files and all available archive logs to training server and perform below steps.
1) You have set properly ORACLE_HOME and ORACLE_SID environment variable.After that first need restore spfile as
rman target /
startup force nomount;
restore spfile from 'autobackup_location';
startup force nomount;2) Now you have to restore controlfiie as
rman>restore controlfile from 'autobackup_location';
rman>alter database mount;
3) Now need catalog(it means register) all backup files and archivelogs in new restored controlfile as
   rman>catalog start with 'backuplocation';
   4) Finally you can restore and recover your database as below
   rman>restore database;
rman>recover database;
rman>alter database open resetlogs;
   If you want restore database to new location then before executing RESTORE DATABASE command you can use SET NEWNAME FOR DATAFILE clause.Firstly refer backup recovery guide in online documentation.

Need help with sending email notifications via OEM

Similar Messages

Maybe you are looking for