Need help with Set Text behavior

In Dreamweaver CS3/Mac, I am creating a disjointed rollover
that is initiated by rolling over an image. I need it to swap two
images and hopefully set text in two divs. I want this to happen on
rollover and not on click. I don't want it to restore on mouse out.
The images are no problem but I can't seem to make this happen for
the text. Is this possible? Any help? Thanks.

http://murraytestsite.com/carneros.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"LB:Monroe" <[email protected]> wrote in
message
news:fsp2da$l1$[email protected]..
> Thanks for your response. You can view the page under
construction at:
>
http://www.monroest.com/tlcd/
>
> As one rolls over a square (image file) in the top bar,
the following is
> to
> occur:
> the large image swaps (simple swap image)
> the caption text changes (text, not an image)
> the text to the right of the image changes (text, not an
image)
> the background color of the text div (currently light
gray) changes
> (property
> change?)
> on some of them, the text color of the long text block
changes (property
> change?)
http://www.monroest.com/tlcd
>

Similar Messages

I need help with my text tone and I have ring tone. no text tone for the 4s.

I need help with my text tone. I have ring tone no text tone. I have a 4s.

Hi Sarar2333! Let's get your text tones working again!
Here's a link with instructions how to enable and change your alert sounds for your text/notification settings on your iPhone 4S: http://vz.to/1stiF8a. You can ensure text tones are enabled by selecting a tone in the "Text Tone" setting. Let me know how that works out for you. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

Purchased extreme to replace modem/router DSL used telephone cord need help with set up

Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?

How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

I need help with setting up my Sun Java Studio Creator

Hello all, i need help with setting up the Studio Creator, i"m new to all that staff so is there anyone to help me just a little with all that if yes email me at [email protected] or get me on AOL Instant Messanger with the screen name: wretch17
thanks :-)

Hi,
Welcome to the Creator community! Thanks for your interst in Sun Java Studio Creator. Please feel free to post any question related to creator on this forum .
Take a look the creator website at
http://developers.sun.com/prodtech/javatools/jscreator/
CreatorTeam

I need help with setting up time machine for backup

I would like help with setting up time machine for backup.

You will need an external hard drive (formatted for a Mac).
Then you plug it in and go to system preferences>time machine and select the external HD and turn it on.
The backups are automatic.
Barry

[SOLVED] Need help with setting up X

Hello guys am new to the forum and this is my first post here. I am in need of a little help.
Need help with X configuration. It starts like this, I installed xorg-server , xorg-utils, xorg-server-utils. When I tried installed xorg-init it says no package, anyway I ignored and moved on.
Now I installed regular mesa stuff and installed xf86-video-ati driver for my HD4250 graphics adapter. with libgl and ati-dri (I have old arch wiki print so it mentioned to install those while newer doesn't list some stuff)
Now the problem is that Xorg -configure doesn't work with newer X and nor the packages has generated /etc/X11/xorg.conf file.
Anyway I created the file manually and added each and every section as mentioned in the "old" guide that I have.
I even added a /etc/X11/xorg.conf.d/20-radeon.conf file for my graphics card with the content as
Section "Device"
Identifire "r"
Driver "radeon"
EndSection
After manually creating all such files I installed x-term, xclock and twm. But when I tried to start X by startx or Xinit it says command not found. Add to that a simple X shows couple of errors.
Please see the errors here Paste #399362 | LodgeIt!
Some more questions : My old guide mentioned to install HAL while newer guide on the net mention DBUS. Though I have added DBUS to be on the safe side but why not HAL ? Is it because of Udev ?
So please help me getting X up and running.
Regards
Last edited by Shashwat (2011-06-04 09:47:47)

Ok I sorted out the misprints in the file and installed xinit but still can't get it to work.
1. There are few errors in xorg.conf that I cannot make it out.
2. The X output says no screen found. ?
http://paste.pocoo.org/show/399383/
Now when I add EndSection at the last its says invalid parameter and when I remove it, I get an error "No EndSection, EOF missing"
Kind of bugging
Please do help.

Need help with optimizing text appearance when exporting video

Here's what I'm trying to do:
1. Convert a Powerpoint presentation to an MP4 (AVC) file, frame rate 30 (actually defaults to 29.97) and video bit rate of 1200kbps,using Wondershare PPT2VideoPro. (There are no actual video clips contained in the original PPT file).
2. Import the newly created MP4 video into a new project in Premeire Elements.
3. Add audio files (WAV) created by Audacity.
4. Export the final product as a video.
Here's the problem:
The text quality in the final exported film is very poor, and the screen occasionally seems to sublty flicker once and a while. I've tried multiple different settings, but all with the same result.
Can anyone offer suggestions on optimal settings for exporting the final product such that the text is as clear as possible? (The text in the MP4 file created by Wondershare looks great.)
Thanks!
- Ernest

One option would be to create the Text Images in Photoshop, and Save_As a PSD.
For large sets of Titles, I do the text portion in Word/WordPerfect, so I can use Spell-Check. Then in PS, I just Copy/Paste the text into an Image, where I apply all of the PS Styles that I need. Because I use PrPro for most of my NLE work, I will often do the Titles with Layered Text, and Import those as a Sequence, so that the Layers are not Flattened. This allows me to independently animate each Layer, as I need. Unfortunately, PrE does not allow one to Import the Layered PSD's, Unflattened, as it does not have Sequences.
Also note that PrE's Titler's Styles are just a starting point. Once applied, one can alter most aspects, and when they are satisfied with the changes, they can then Save the new Style and re-use it over and over. Do not forget the ability to modify those Styles.
From PowerPoint, and this depends on the version, the best that one can usually do is to Export each "slide" as a TIFF, and Import those into the NLE program.
Good luck,
Hunt

Need help with automating text import/pasting/macro between Photoshop and Excel

Hey everyone,
I'm working on a large project now that seems extremely daunting, but I was hoping there would be some way to automate it using either Actions or some sort of macro program. Here's the gist:
I've created a template with 24 differently sized text boxes in the photoshop image file. Each text feild has unique text that needs to be be pasted into it, which has been compiled in excel. This wouldn't be too dificult to do, except I have to recreate this image and all 24 text fields aproximately 350 times. None of the text boxes will remain static through all 350 images as text is the title, description, and demographic ratings/percentages/data for the topic of each image. I did something similar manually last year and it took me about 3, non-stop 18 hour days to complete it.
(the test template)
Can anyone think of any way I could automate this process? I'm thinking some sort of macro that copies cell 1 in excel, switches to photoshop, opens layer 1, pastes, switches back to excel, goes to cell 2, copies, back to photoshop, layer 2, pastes, etc, etc, then does a 'save as' in photoshop and revets to PS layer 1, EX cell 1 (on tab 2) to start the process all over again. I have no idea if this would work or if there is another way to do this but I would really appreciate any help or advice you guys could give. I don't have really any expreience using PS Actions or macro programs/scripts, so I may be over my head or overlooking a really simple way to do this. If there's a way to do it, I'm persistent enough to figure it out and get it working. Doesn't really matter how it gets done, I just need to fill those text boxes as best as I can and as quickly as I can.
Any help you all could give is really appreciated.

Have you read up on the Variables support in Photoshop?

Need help with cleening text during ExportAllStories (JS-CS4)

I have altered the ExportAllStories.jsx script for CS4 to export the selected TextFrame(s).
The main function are the same as in the original.
It works fine, but I need advice on how to clean the text before it gets exported to a text file.
I have tried to pass the TextFrame object myStory, as in the original script, to a function like this:
myStory = cleantext(myStory)
The function cleantext works with a text string passed to it,like this:
function cleantext(s) {
s.replace(/\u2011/g,'-');
I guess I have to extract the myStory object to a text string but haven’t succeeded yet.
Maybe the solution is to do some search and replace with GREP or other techniques?
All tips on how to proceed would be appreciated.

This is how i solved my problem.
With the help from Peter Kahrels function
function replace (f, r)
   app.findGrepPreferences.findWhat = f;
   app.changeGrepPreferences.changeTo =r;
   app.documents[0].changeGrep ()
And in my script I could easily do this:
app.findGrepPreferences = app.changeGrepPreferences = null;
story = app.selection[0].parentStory;
// Sample: Replace non-breaking hyphen (8209 -> \u2011) with a regular hyphen.
replace("/\u2011/g",'-');
app.findGrepPreferences = app.changeGrepPreferences = null;
And thereafter proceeding with the exporting stuff.
Thank you all contributors in this forum!

Need Help with setting up this Filter

Hi,
I need help making a filter sound like the one used in this youtube song.
I tried setting it up but I've had no success; even though I know for a fact that this filter was made in Logic Pro 9 according to the maker of this song.
I think there might be a bit of 'Fuzz-Wah' in there too but I've never really used that effect so any tips on that would be great, too.
Link: http://www.youtube.com/watch?v=tf017M8SZZE&feature=plcp
Any help with this would be widely appreciated.
Thank you :-)

It sounds like a simple hi Q filter sweep to me but getting close to the original synth sound that it is being used on is the challenge. It might well be that it is the filter on the synth itself is what is being swept. Either way, turn up the filter resonance on a band pass filter and sweep it with the lfo or adsr to modulate the filter cutoff if its the synth filter, or automate the filter frequency sweep if you use the channel filter.

Need help with Set-ADUser command

I need a little help with the following command. Im new to PS and I have found this command but it is only one user at a time. I need to be able to update ALL users in AD.
My goal is this. Someone before me set all Users Home numbers to 1234567899 and I need to remove that and leave it blank. The command below allows me to do that but only one user at a time by entering their SAMID.
Is there a way to do this for everyone in AD ?
Set-AdUser –Identity SAMID –HomePhone $NULL

Yeah sure -
Get-Aduser -filter * -properties SamaccountName | Select SamAccountName | % {Set-Aduser -identity $_.SamaccountName -HomePhone $null}

Need HELP with setting up my email on new 4g ipod touch.

I need help setting up my email on my 4g ipod touch. I just got it today and had a 1st gen and it worked fine. I need help setting it up again.
Any help would be appreciated
Thanks in advance.
Pam

http://www.apple.com/support/ipodtouch/assistant/sendmail/

Need help with setting up VPN on a Cisco EPC3925 Modem

Hi everyone,
I need help setting VPN on Cisco EPC3925 modem (I tried using Help and I have read the entire section in the manual but the manual is not the same as the window I get in my settings. For example in the manual they say I can choose "all" under Remote Secure Gateway but there is no option like that).
When I go to the VPN section this is what I get:
1. Does this mean that I can connect to my modem via VPN from some other location? I would like to be able to connect to this modem when I am not at home from some remote location from my computer in order to be able to use NAS-Storage.
2. If the answer on the first question is yes, what settings I need to enter for the:
Local Secure Group
Remote Secure Group
Remote Secure Gateway
My ISP is using dynamic IP but I have DDNS.
My router local IP is 192.168.0.1
Subnet: 255.255.255.0
Starting IP Address: 192.168.0.10
Here is how the advanced settings looks like:
Thanks in advance for your help!

My problem similar too this. I create a tunnel between two epc3925 but impossible to send data between them.
The status is connected. What can I do? UPC tell me this router has only vpn client so i will doesn't work.

I need help with setting 2 decimal places

I am using netbeans to create a GUI. My math works I need help formatting the result to 2 decimal places.
Thanks for any help.
This is part of my code..
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
// Regular button
double RegularPrice = 3.09;
double num1, result;
num1 = Float.parseFloat(jTextField1.getText());
result=RegularPrice * num1;
jLabel2.setText(String.valueOf(result));
}

http://java.sun.com/j2se/1.5.0/docs/api/java/text/DecimalFormat.html

Need help with set-up

Hello,
I gave my son an Iphone 4 to use. He is in the military overseas now and let his phone for another sibling to use while deployed. Problem is he wiped it clean but it is still asking for the email/password to set up since its still connected to his account.
Problem is I don't know this info and neither does he. It's been over a year already and he has no clue. The email retrieval doesn't work because he doesn't have access to emails. HELP!!!
Is there anyway to get past the logon screen??
Thanks.

Hey blaub6,
Thanks for the question. Your son will need to gain access to his Apple ID account to unlock this device. Find my iPhone Activation Lock is designed to lock the device from use from anyone other than the owner. If you son needs help gaining access to his Apple ID account, he can use the following resources as a starting point:
How to find your Apple ID - Apple Support
http://support.apple.com/en-us/HT201354
If you forgot your Apple ID password - Apple Support
http://support.apple.com/en-us/HT201487
Additional information about Find my iPhone Activation Lock:
Find My iPhone Activation Lock - Apple Support
http://support.apple.com/en-us/HT201365
Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
http://support.apple.com/en-us/HT201441
Thanks,
Matt M.

Need help with Set Text behavior

Similar Messages

Maybe you are looking for