Need help with setting up 2 xboxs to open NATS with my Cisco DPC3825
Hey,
I have 2 xboxs, 1 is wired and one has the microsoft adapter for wireless.. I have been searching tons of forums to try to solve this issue, and I'm at my end if it! I really need both my nats open, so far I can get 1 nat open while the other one is strict. I have a Cisco DPC3825. Any help would be great!! Thanks!
Hi Casteel,
Thank you for your question. However this community is for Cisco Small Business Products and the DPC3825 is not a Cisco Small Business Product.
Your product is an internet service provider (ISP) supported product. In otherwords you need to contact your ISP or technology reseller that you purchased this from to help you with your question.
Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
Similar Messages
-
Need help to set wireless Linksys Router WRT150N to work with Nettalk Duo
I have Linksys Router WRT150N , connect to it Nettalk Duo but there is no ring tone, the orange light is flashing trying to connect, then i have the green light blinking then go Red.
I thied to call Nettalk but no answer to their phone, chat with customer support at last they said someone from technical support will call back, but that not happen since two weeks.
I make several tickets to them but no reply, service is very bad.
Please any help to configer inside the router to recognise Nettalk, i have cable internet they said there is no blockage from there side.Hey sam63. Based from what I've read, RED lights means the device has failed to connect to the network. I'd suggest that you perform a powercycle. Unplug the power of the NetTalk Duo and the router for 30 seconds. Once done, power on the NetTalk first then, the router. Also, make sure that it is properly connected to the router's Ethernet port and the router is working online. You may try using another Ethernet cord or plug it into another Ethernet port.
If that won't work still, I found a link that might help you. Here: http://www.nettalk.com/support/customer-support/
Help, learn and share -
Need help w/ setting up ports to run a server for America's Army
Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
Q: How do I run my own server?
A: Quick and dirty server info:
1. Edit RunServer.bat to change the map.
2. Run RunServer.bat
Or:
server.exe LAN MAPNAME.aao (Host a LAN game)
server.exe global MAPNAME.aao (Host a Public game)
Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
[Engine.GameEngine]
ServerActors=Andromeda.AndromedaMBS
[Andromeda.Andromeda]
GameServerIp=
Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
[Andromeda.AndromedaMBS]
QueryPort=20025
Punkbuster user fix correction.
If [Engine.GameEngine] block has been changed to read as below:
[Engine.GameEngine]
ServerActors=IPDrv.AndromedaMBS
Please add the following block to your INI file:
[IpDrv.AndromedaMBS]
QueryPort=20025
(Last Updated: 2006-04-20)Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it. -
I need help in setting up a wireless connection
I need help in setting up a wireless connection.
I have a 2005 iMac G5 and currently I am using a Qwest DSL Modem with a Belkin router.
Qwest suggested that I buy a new wireless modem/router. It may be the Motorola 3347 or another wireless modem. I am worried about security when on the internet and have read about changing the SSID password and use the WPA for encryption. All of this is a mystery to me.
Also, I would like to buy from Directv the Linksys wireless adapter to use on my HD-DVR receiver to get their “On Demand Movies.”
My question is, does my iMac G5 have all of the security I need to use a wireless modem, and with the Linksys adapter can I view my photos or DVD’s in iMovie wirelessly to my TV in the living room?
I am concerned about security with a wireless setup, but it seems that all of the new TV’s have the ability to have a wireless connection to the internet.
Any suggestions would help me.
Thanks,
DaisyMayNETGEAR RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports
Model: WNDR3400-100NAS | SKU: 1208844
This wireless router enables speeds up to 600 Mbps for efficient operation and features a broadband usage meter that ensures accurate measurement of daily, weekly and monthly Internet traffic.
4 Read reviews (21)
Sale: $79.99 -
Downloaded Epsom printer app need help to set printer up on iPad 3
Need help to set up Epsom printer to ipad3 downloaded Epsom app can find the printer but don't know where to set up
It's Epson, not epsom. Epsom refers to epsom salt (magnesium sulfate).
... Anyway, iPads don't have printers directly set up. You might interface with a printer over a WiFi. That could be done either using Apple's AirPrint (if the printer is new enough) or maybe you have Epson's iPrint utility.
If you have the iPrint utility, you simply open the utility, click the "maintenance" button in the lower left, and select the "Printer" on the top and set it up there. -
Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset preferences and still have problem. Slow to open and in force quit "Photoshop not responding" At this point should I uninstall and start over.
What are the performance Preferences?
-
Need help on displaying the callers name on ip phone with cme using external directory
Hello Guys,
Need help on displaying the callers name on ip phone with cme while using external directory
Thank you,
KhajaThanks for your help,
Does it 100% work with CME. We use SIP and 2ring for external directory? Thanks you. -
Need help to set up my exsisting paypal account
need help to set up my exsisting paypal account
Did you have a look at the document listed here
http://forums.adobe.com/community/formscentral/payments?view=documents
Gen -
I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.
Account Security Team (AST)
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team. -
i bought my iphone secondhand, and the previous owner didnt deltete his find my iphone account, so when i restored it i know cant access my phone, i need help as i have no way of getting intouch with the previous owner whatsoever :/ help!
Welcome to the Apple community.
Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone. -
Unable to open PDF files with Adobe Reader, Mac trying to open files with QuickTime instead, but not succeeding. HELP!
Hi BDAqua,
Thanks for the info, I dragged a PDF to desktop ctrl-, get info. change all to open with adobe.
Problem solved, many thanks for a quick response.
Barry69 -
NEED HELP TO SET UP SMALL NETWORK - WIRELESS SIGNAL FROM NOVATEL U760 USB
Hello -
I need help setting up a small network in my new home in Florida, which has no wired broadband capability - not cable, not dsl. My options are satellite (which I'd like to avoid) or wireless broadband via Millenicom (or now Virgin Mobile) using their Novatel U760 USB stick.
Here are the network components - someone please tell me how to set this up:
PC #1 (has wireless card, but I've connected it by ethernet to the router)
PC #2 (no wireless card; connected via ethernet to router)
MACBOOK, 1 1/2 years old (2.1 GHz Intel Core 2 Duo, 4 gigs RAM), running OS 10.58, connected wirelessly to router.
AIRPORT EXTREME BASE STATION, Model A1143.
I'm not thrilled about using a wireless 3G signal as my primary one, (sprint network, claims 600 - 1400 kbps speed), but it costs 1/2 to 1/3 of what a slightly faster satellite signal would.
I have not ordered this service yet. Before I do, I'd like a clear understanding that I can, in fact, set up my simple network, which I'd probably do the same as it's now configured with cable broadband - both PC's plug via
ethernet into the Airport Extreme router, the MacBook connects wirelessly - AND,
my question is this:
Can I plug the wireless card - a Novatel U760 USB-stick device - straight into that USB slot in the Airport Extreme base station and will it automatically recognize that device?
Or, do I have to plug it into the MacBook and somehow share that wireless signal between the 2 PC's (only 1 of which has a wireless card, so I'd have to get a card for PC #2)?
And help anyone can provide will be much appreciated!
Thanks,
Emfrom the Airport FAQ #14:
"Question: Can I connect my Soundsticks or other USB speakers to AirPort Express?
Answer: No. The USB port is for connecting a printer, not for other devices."
Im assuming other devices include USB modems.
So, I would say your cheaper route would be to get a second wireless card and just share your internet connection from one of your PC. -
I'm a beginning developer and I need help in setting up my user configuration
Sorry if this is kind of vague and needs very extensive responses, but I can't find any resources online to help me with what I need. I'm doing The Odin Project's web development curriculum (rather loosely, since it advised me to follow a guide that wasn't very helpful and I switched to this one instead – also listed in TOP anyway) and I'm having trouble with setting up my Ruby environment. I could set up Brew, Git and Heroku just fine, but when I try to install Ruby 2.2.1 with RVM so all my files will be in the proper directories, I hit a problem. Here's the entire log – notice that I have 2.2.1, but not in the /.rvm directory as advised by Installfest. What's really worrying about this is that I do have clang 3.0 instead, and yet every time I need to do something with it I get the same error message. I started reading this and this hoping they'd clear things up, but they assume prior knowledge of compiling source code and setting up an entire system (and A LOT more prior knowledge than what I have at that). Every other clang/LLVM resource I've looked at is for advanced users.
The other compiling issue I'm having is with Python 3. I asked for help on Homebrew's Github repository and they told me that there's something wrong with my user configuration, but I have no idea how to fix it or even where to start. All the resources I can find are either for people who don't know what the command line is, and just teach you basic syntax, or advanced software developers – nothing in the middle. I really, REALLY need someone to help me out with this configuration issue or at least point me to a more appropriate guide that I haven't found yet.Before you do that, just realize there is a very good chance it will mess everything up. When you are using these 3rd party languages and frameworks, and especially 3rd party tutorials, you have to play by their rules. I just wanted to know what OS you were running. Many of those various 3rd parties will assume something newer than 10.6.8, but also something older than 10.10.2. I have no idea what the exact magic sauce would be to get to exactly the right version.
You might want to consider Linux in a virtual machine. It won't be any easier to setup and may be much more difficult. But you can deal with the ruby and python inside the Linux without possibly screwing up all of your other software in the Mac world. -
NEED HELP PLEASE Setting up 2 VLANS and a redundant WAN connection
I have a remote branch office which is actually a huge bar/lounge. The bar wants to enable patrons to access the Internet with their wireless laptops. I want to prevent those patrons from accessing our private network, and also prevent them from traversing our static VPN tunnel back to HQ.
The bar processes all credit cards via the T1 connection, and this has caused us to lose money every time the T1 goes down while we're open, since there is no WAN redundancy right now.
Here is my current hardware configuration:
1) one PIX 501 50-user 3des.
2.) two Dell 3024
3.) one Aironet 1100(g) AP.
Current LAN Network: 10.35.35.0
(internal employees only, static VPN tunneled to remote HQ network)
Current Wireless SSID's:
SSID1=PRIVATESSID
SSID2=PUBLICSSID (not currently in use, waiting to figure this out)
Current WAN: one T1 connection.
WHAT I WOULD LIKE TO DO AND NEED HELP FIGURING OUT:
#1a) I want to create two separate VLAN's that are able to share the WAN connection, but not be able to "see" each other.
#1b) These VLAN's would be mapped to their respective SSID's on the AP (PRIVATESSID>10.35.35.0 and PUBLICSSID>192.168.1.0).
#1c) The 192.168.1.0 network should not be able to traverse the static tunnel between the branch site and HQ.
#2) I would like to install a backup WAN connection such as a modem 56k dial-up to an ISP or a cable modem to an ISP. In case the primary T1 goes down, I would like the router to automatically dial out over the modem conection and route all Internet bound traffic over that backup WAN connection, until the primary comes back online.
Question 1:
I'm assuming I need a router to do the intervlan routing. Could this router also do the on-demand WAN backup dialing to an ISP via analog modem?
What IOS version and flavor (IP base, IP+, etc.) would I need? What is the cheapest router I can do all that with (i.e. 2620/2621/1720/3600 series)? What WIC's or NM's would I need?
Question Two:
I would like to prioritize PRIVATESSID's traffic over PUBLICSSID's traffic, which I know I can do on the access point. Can I do this on the router so that any 10.35.35.0 traffic takes priority over any 192.168.1.0 traffic?
Question Three
If the primary T1 WAN connection goes down, I don't want the router to re-route the 192.168.1.0 traffic over the backup 56k dial-up WAN connection. That traffic can wait until the T1 comes back up.
Any help you can provide would be very much appreciated.Assuming your access points can place SSID into separate vlans and support 802.1q trunks then I can attempt to answer your questions. There are seperate secuity issues with both SSID for protection and VLANs for seperation but in your case in may be minimal.
q1
Any cisco router that will run 802.1q trunking will work. Since you are looking at older routers you will need IP+ to get it. Even 2610's will support 802.1q on their 10m ethernet at the correct code level but 10m and 802.1q is sorta nonstandard. Since your backup is only 56k you can use the internal modem port as a dial backup. A wic-2a/s will also work if you prefer not to use the modem port. You will need some wic to run your t1 line. If you are planning to leave the t1 on another router it makes the next 2 questions much harder.
q2
This is fairly simple and depends on your ios level. "priority queing" is supported on even the older software. I assume you do not control the far end of the t1 line since it sounds as if this goes to a ISP.
You will need to have them do the QoS since most issues with the internet are inbound and not outbound. You can only control outbound traffic.
q3
If the T1 is on the same router then this is fairly simple. You can just put a floating static default route in that will cause the dialer to come up if the the t1 goes down. There is no easy way to protect against the line being up but no traffic passing. This is also why it would be best to have the t1 on the same router. If its not you will need to get very creative to solve this. You could build a GRE tunnel to a remote location and montior the tunnel or run a routing protcol over the tunnel. In the newest software you could use SAA and policy routing to force the traffic over the dialer but the router must support ios 12.4.
3a. You mentioned a cable modem as a backup. That can be much easier sometimes since it is all routing and no dialer interfaces with nasty modem issues. This does not make the issue of the t1 not on the same router easier. -
hi i need help, im new on mac, i bought the las year a macbook pro 13's late 2011 with 4 gb of ram and 500 gb of hdd, i5 proccesor of 2.4. the mbp was working ok, until yesterday, i was working on keynote and then, it started to getting really slow, then it frozzen, and the little umbrella start to appears,i tried every thing, i shut down the power button, wait a minute then i power up, and nothing, i run the ccleaner, i check the hdd status, the ram, and everything was ok, i even boot up the system like fabric and still nothing i got the umbrella everything than i run an application. please please help me.
what i have to do?????????????Try a Safe Boot to clear the dyld_shared_cache (dynamic loader cache)
SafeBoot http://support.apple.com/kb/HT1564
Safe Boot, which automatically rebuilds this cache (among other things).
Maybe you are looking for
-
Hi. My husband and I have always shared the same iTunes account. Since installing iCloud, all our contacts and calenders have merged on our iPhone 4, which we do not want. How do I rectify this? Does my husband need to set up his own apple ID? If
-
Problems with Pages 5 ... in just one area, Outline mode. -Pages v5 has no Outline view. I use outlines most of the time. I'm not always in Outline view (in Pages 4.3) because my outline styles look the same in regular view, that's great! But I do go
-
Hello, Safari works fine when using an ethernet cable, but whenever I try to use it wirelessly it tries to load for about ten minutes before it says: "Safari can't open the page." A different computer in the house has no problems using wireless inter
-
Mass Re-Read of PP master data
Hi Is there is any transaction or Way to have MASS reread PP master data in Production orders?
-
Gray screen (sometimes blinking question mark) at start up
My husband was using my beloved Macbook last night & said that while surfing Facebook, all of Firefox locked up & the spinning wheel thing (like it was thinking) made it imposbbile for him to do anything. Rather than doing ctrl + option + esc (or w