Need help with setting up a photolibrary on server that can be accessed/edited by multiple users

Hi:
I would like to develop an in-house photolibrary for our graphics department. The goal is to be able to add keywords to all our images so that we could have a more dynamic means of searching through our countless scanned images. Lightroom works great with regards to keywording and searching.
To make it so all the computers in our office could have access to the images, I created a photolibrary on our server that can be accessed by any of the computers in our graphics dept. However, when one computer adds keywords to an image, that info does not show up on any of the other computers. Perhaps this is an issue with the trial version and we need to get the license? A few other people suggested that it might have something to do with my export settings - I tried to play around with the settings but had little luck...Any Advise?
Thanks,
Leo

Thanks for your thorough reply. Is there a way to have one MASTER computer that could create the keywords and have the other computers access the master computer's catlogues - or something of that sort. We are small graphics dept. with three people so even that would suffice.
Lightroom is not a networked application, and cannot be set up so that multiple computers can access LR via a network.
The only real workaround with LR is to put the catalog and photos on an external HD and then physically connect the external HD to the computer of the person wanting to use it. So only one person can use the catalog at one time.
You can look up Digital Asset Management (DAM) software on Google if you really need to have multi-user access and networked.

Similar Messages

  • Purchased extreme to replace modem/router DSL used telephone cord need help with set up

    Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
    Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
    How do I get extreme to work as the modem and router ?

    How do I get extreme to work as the modem and router ?
    you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

  • I need help with setting up my Sun Java Studio Creator

    Hello all, i need help with setting up the Studio Creator, i"m new to all that staff so is there anyone to help me just a little with all that if yes email me at [email protected] or get me on AOL Instant Messanger with the screen name: wretch17
    thanks :-)

    Hi,
    Welcome to the Creator community! Thanks for your interst in Sun Java Studio Creator. Please feel free to post any question related to creator on this forum .
    Take a look the creator website at
    http://developers.sun.com/prodtech/javatools/jscreator/
    CreatorTeam

  • I need help with my i tunes gift card(exchangable) that is damaged.Help please!!

    I need help with my i tunes gift card(exchangable) that is damaged.Help please!!

    iTunes Store: Invalid, inactive, or illegible codes

  • I need help with setting up time machine for backup

    I would like help with setting up time machine for backup.

    You will need an external hard drive (formatted for a Mac).
    Then you plug it in and go to system preferences>time machine and select the external HD and turn it on.
    The backups are automatic.
    Barry

  • [SOLVED] Need help with setting up X

    Hello guys am new to the forum and this is my first post here. I am in need of a little help.
    Need help with X configuration. It starts like this, I installed xorg-server , xorg-utils, xorg-server-utils. When I tried installed xorg-init it says no package, anyway I ignored and moved on.
    Now I installed regular mesa stuff and installed xf86-video-ati driver for my HD4250 graphics adapter. with libgl and ati-dri (I have old arch wiki print so it mentioned to install those while newer doesn't list some stuff)
    Now the problem is that Xorg -configure doesn't work with newer X and nor the packages has generated /etc/X11/xorg.conf file.
    Anyway I created the file manually and added each and every section as mentioned in the "old" guide that I have.
    I even added a /etc/X11/xorg.conf.d/20-radeon.conf file for my graphics card with the content as
    Section "Device"
    Identifire "r"
    Driver "radeon"
    EndSection
    After manually creating all such files I installed x-term, xclock and twm. But when I tried to start X by startx or Xinit it says command not found. Add to that a simple X shows couple of errors.
    Please see the errors here Paste #399362 | LodgeIt!
    Some more questions : My old guide mentioned to install HAL while newer guide on the net mention DBUS. Though I have added DBUS to be on the safe side but why not HAL ? Is it because of Udev ?
    So please help me getting X up and running.
    Regards
    Last edited by Shashwat (2011-06-04 09:47:47)

    Ok  I sorted out the misprints in the file and installed xinit but still can't get it to work.
    1. There are few errors in xorg.conf that I cannot make it out.
    2. The X output says no screen found. ?
    http://paste.pocoo.org/show/399383/
    Now when I add EndSection at the last its says invalid parameter and when I remove it, I get an error "No EndSection, EOF missing"
    Kind of bugging
    Please do help.

  • Need help with setting up a stream with FMLE and FMS

    Hi guys!
    I'm new to this stuff, so i would love if you could guide me, and/or tell me if what i'm trying to do is even possible.
    This is what i'm trying to do:
    I am currently working on a project for Narvik University College in Norway. We are experimenting with remote control of some lab equipment. We want to stream live video from the lab for the students to see.
    So..
    I want to set up a stream from my webcam that can be accessed through a webpage by anyone (with minimal delay)
    This is what i understand i have to do:
    Use FMLE to connect to the webcam, and connect FMLE to FMS, and somehow get this out on my webpage.
    It's the Flash Media Server bit i don't understand. How do i go about to get this out on my webpage? Do I have to use a Flash Streaming service like Onyxservers to do this, or can i do this part myself? If yes, how complicated is this?
    Best Regards
    Daniel Bjørkman
    Narvik University College

    OK, i have now managed to set up the Flash Media Server and made a simple flash application that shows the stream.
    But now, everything is local, and if i want to embed the stream on the webpage, i guess it can't be local.
    The source in the flash application is "rtmp://localhost/live/livestream" and shows the webcam when i open the .html file (with the flash video embedded) on this computer. What should the source look like when i embed the flash file in a webpage that is not on this computer?

  • Need help with Outlook 2013 connecting to Exchange server(2010)

    Hi
    I need help with Outlook 2013 and with my exchange server(2010) email account
    After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
    However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long.  In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
    and any emails I compose dont work.  I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue  I have also done a TraceRoute and that shows no drops or problems to he exchange server.
    Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
    Look forward to a solution soon
    Thanks

    Hi Angela
    Thanks for your message
    To answer your questions, please note the following
    a) My account is set up in Cache Mode( not online mode)
    b) I am the only other user on the account
    c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
    d) When the connection to the server is there, it shows  connection as "established"
    e) Sorry I dont understand th meaning of CAS array in your environment?  Can you pls explain
    Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account.  So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
    as it has done that in the past on both outlook versions.  The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
    My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results.  I have also changed the profile a few times, but the intermittent connectivity problem hasn't
    been resolved.
    Can you identify the possible causes and more importantly a working permanent solution please
    Thanks
    Mahesh

  • Need Help with setting up this Filter

    Hi,
    I need help making a filter sound like the one used in this youtube song.
    I tried setting it up but I've had no success; even though I know for a fact that this filter was made in Logic Pro 9 according to the maker of this song.
    I think there might be a bit of 'Fuzz-Wah' in there too but I've never really used that effect so any tips on that would be great, too.
    Link: http://www.youtube.com/watch?v=tf017M8SZZE&feature=plcp
    Any help with this would be widely appreciated.
    Thank you :-)

    It sounds like a simple hi Q filter sweep to me but getting close to the original synth sound that it is being used on is the challenge. It might well be that it is the filter on the synth itself is what is being swept. Either way, turn up the filter resonance on a band pass filter and sweep it with the lfo or adsr to modulate the filter cutoff if its the synth filter, or automate the filter frequency  sweep if you use the channel filter.

  • Need help with Set-ADUser command

    I need a little help with the following command. Im new to PS and I have found this command but it is only one user at a time. I need to be able to update ALL users in AD.
    My goal is this. Someone before me set all Users Home numbers to 1234567899 and I need to remove that and leave it blank. The command below allows me to do that but only one user at a time by entering their SAMID.
    Is there a way to do this for everyone in AD ?
    Set-AdUser –Identity SAMID –HomePhone $NULL

    Yeah sure - 
    Get-Aduser -filter * -properties SamaccountName | Select SamAccountName | % {Set-Aduser -identity $_.SamaccountName -HomePhone $null}

  • Need HELP with setting up my email on new 4g ipod touch.

    I need help setting up my email on my 4g ipod touch. I just got it today and had a 1st gen and it worked fine. I need help setting it up again.
    Any help would be appreciated
    Thanks in advance.
    Pam

    http://www.apple.com/support/ipodtouch/assistant/sendmail/

  • Need help with setting up VPN on a Cisco EPC3925 Modem

    Hi everyone,
    I need help setting VPN on Cisco EPC3925 modem (I tried using Help and I have read the entire section in the manual but the manual is not the same as the window I get in my settings. For example in the manual they say I can choose "all" under Remote Secure Gateway but there is no option like that).
    When I go to the VPN section this is what I get:
    1. Does this mean that I can connect to my modem via VPN from some other location? I would like to be able to connect to this modem when I am not at home from some remote location from my computer in order to be able to use NAS-Storage.
    2. If the answer on the first question is yes, what settings I need to enter for the:
    Local Secure Group
    Remote Secure Group
    Remote Secure Gateway
    My ISP is using dynamic IP but I have DDNS.
    My router local IP is 192.168.0.1
    Subnet: 255.255.255.0
    Starting IP Address: 192.168.0.10
    Here is how the advanced settings looks like:
    Thanks in advance for your help!

    My problem similar too this. I create a tunnel between two epc3925 but impossible to send data between them.
    The status is connected.  What can I do? UPC tell me this router has only vpn client so i will doesn't work.

  • Need help with set-up

    Hello,
    I gave my son an Iphone 4 to use.  He is in the military overseas now and let his phone for another sibling to use while deployed.  Problem is he wiped it clean but it is still asking for the email/password to set up since its still connected to his account.
    Problem is I don't know this info and neither does he.  It's been over a year already and he has no clue.  The email retrieval doesn't work because he doesn't have access to emails.  HELP!!!
    Is there anyway to get past the logon screen??
    Thanks.

    Hey blaub6,
    Thanks for the question. Your son will need to gain access to his Apple ID account to unlock this device. Find my iPhone Activation Lock is designed to lock the device from use from anyone other than the owner. If you son needs help gaining access to his Apple ID account, he can use the following resources as a starting point:
    How to find your Apple ID - Apple Support
    http://support.apple.com/en-us/HT201354
    If you forgot your Apple ID password - Apple Support
    http://support.apple.com/en-us/HT201487
    Additional information about Find my iPhone Activation Lock:
    Find My iPhone Activation Lock - Apple Support
    http://support.apple.com/en-us/HT201365
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
    http://support.apple.com/en-us/HT201441
    Thanks,
    Matt M.

  • Need help with setting up iTunes match

    not able to get my itunes match to work on my iphone 3gs

    If you are getting an error that you are not subscribed this generally means you need to sign into the mobile iTunes Store with the exact same iTunes account ID that you used to enable Match in iTunes.
    Go to Settings > Store and confirm the ID. If necessary, sign out then back in. Then go to Settings > Music and set iTunes Match to "on."

  • Need Help with Setting Up E-Mail on My BlackBerry Q-10

    This is my first "not basic" cell phone so I'm struggling in setting it up (there are things that just are not covered at all in the on-line User's Manual). The BlackBerry Q-10 apparently doesn't display the full-on "compose" e-mail screen unless an e-mail account is set up. The e-mail account I have is what I access on my desktop computer; and because I get so, so many unimportant e-mails on it every day, I don't want to be getting all these e-mails on my cell phone (but I "do" want access on my cell phone to ALL the e-mail screens and options). Is there a way I can use my existing desktop computer e-mail address to set up the e-mail account on my BlackBerry Q-10 but then somehow turn the "incoming" e-mail function on the cell phone off completely (so I only get the e-mails on my computer)? Also, what does it mean when it asks if I want to "sync" my e-mails? Any help would be greatly appreciated!
    Solved!
    Go to Solution.

    Two or three thoughts.
    My BlackBerry handset has become my exclusive email tool. I think if you get used to the idea of accessing email from different machines, with the BlackBerry being one of them, it will begin to make sense.
    If you haven't enabled a junk email filter at the server level on your email service, do it. Filtered email will not be sync'd with the BlackBerry email client.
    Set up your email as IMAP. If you are using Outlook.com, setup as EAS. Create folders for email you don't want sync'd to the inbox on the BlackBerry. Setup rules to move that email to the appropriate folder as it arrives. You will be able to view those folders and their contents on the BlackBerry when you want, but they will not be sync'd automatically unless you turn that on.
    As far as your last question, what is the context? Generally speaking, the email can be automatically synchronized. If IMAP or EAS, the folders on the device and other devices and the servers are synchronized. Read an email one place and it is marked read everywhere. Ditto deletes and moves.
    - Ira

Maybe you are looking for