Need help with setting up Internet sharing to PS3

Hey, so I am trying to use my Macbook as a wired router to my PS3 (My Macbook is on my wireless Linksys router and I have the cable needed to create a wired connection from my Macbook to my PS3. I had this setup working once before after getting a specific set of numbers from a google search but can't seem to find that page anymore. I've only been able to find threads on creating a wireless connection. So here is my problem. From system prefs, I am entering into my PS3 all the numbers my Macbook is giving me from system prefs (my IP address, default router, subnet mask, and DNS servers). But ever time I run an internet connection test I get DNS Error 80710102. If someone could help me it would be greatly appreciated.

Really?? I know this problem was solved before on the Apple message boards but I've been searching for it for quite some time and have yet to find that thread. Can someone help me with this??

Similar Messages

Purchased extreme to replace modem/router DSL used telephone cord need help with set up

Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?

How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

I need help with setting up my Sun Java Studio Creator

Hello all, i need help with setting up the Studio Creator, i"m new to all that staff so is there anyone to help me just a little with all that if yes email me at [email protected] or get me on AOL Instant Messanger with the screen name: wretch17
thanks :-)

Hi,
Welcome to the Creator community! Thanks for your interst in Sun Java Studio Creator. Please feel free to post any question related to creator on this forum .
Take a look the creator website at
http://developers.sun.com/prodtech/javatools/jscreator/
CreatorTeam

I need help with setting up time machine for backup

I would like help with setting up time machine for backup.

You will need an external hard drive (formatted for a Mac).
Then you plug it in and go to system preferences>time machine and select the external HD and turn it on.
The backups are automatic.
Barry

[SOLVED] Need help with setting up X

Hello guys am new to the forum and this is my first post here. I am in need of a little help.
Need help with X configuration. It starts like this, I installed xorg-server , xorg-utils, xorg-server-utils. When I tried installed xorg-init it says no package, anyway I ignored and moved on.
Now I installed regular mesa stuff and installed xf86-video-ati driver for my HD4250 graphics adapter. with libgl and ati-dri (I have old arch wiki print so it mentioned to install those while newer doesn't list some stuff)
Now the problem is that Xorg -configure doesn't work with newer X and nor the packages has generated /etc/X11/xorg.conf file.
Anyway I created the file manually and added each and every section as mentioned in the "old" guide that I have.
I even added a /etc/X11/xorg.conf.d/20-radeon.conf file for my graphics card with the content as
Section "Device"
Identifire "r"
Driver "radeon"
EndSection
After manually creating all such files I installed x-term, xclock and twm. But when I tried to start X by startx or Xinit it says command not found. Add to that a simple X shows couple of errors.
Please see the errors here Paste #399362 | LodgeIt!
Some more questions : My old guide mentioned to install HAL while newer guide on the net mention DBUS. Though I have added DBUS to be on the safe side but why not HAL ? Is it because of Udev ?
So please help me getting X up and running.
Regards
Last edited by Shashwat (2011-06-04 09:47:47)

Ok I sorted out the misprints in the file and installed xinit but still can't get it to work.
1. There are few errors in xorg.conf that I cannot make it out.
2. The X output says no screen found. ?
http://paste.pocoo.org/show/399383/
Now when I add EndSection at the last its says invalid parameter and when I remove it, I get an error "No EndSection, EOF missing"
Kind of bugging
Please do help.

Help with Firewall and Internet Sharing

I’m trying to use my Mac Mini with an Airport Extreme card, which is connected to the internet using Siemens Speedstream 4100 DSL modem, for Internet Sharing with a Windows (work) laptop.
So, in the Sharing preferences panel:
Share connection from: Built in Ethernet
To computers using: Airport
I get the warning message:
Other settings may interfere with Internet Sharing.
The ‘More Info’ button gives the popup message:
Your firewall settings will prevent computers sharing your internet connection from browsing the web. Enable Personal Web Sharing in the Services pane to allow computers sharing your connection to browse the web.
I do that, turn the Airport card on, and the laptop can see the network, but can’t connect.
If I turn the Firewall off, then I can connect fine, but then I don’t have a Firewall. Isn’t that risky if I’m using DSL? How can I do the internet sharing and still protect my computer?
I realize I could buy a router with a built-in firewall, but isn’t there a way to set up the system using what I have?

BDAqua wrote:
We just need to figure out what port is needed. I'd goto Sharing>Firewall>New>Port Name... Other, and try Port 53 both UDP and TCP.
Oh, and when you say the PC can't connect, could that just mean it can't browse?
On the PC, put the IP of the Mac in DNS servers, or...
208.67.222.222
208.67.220.22
Well, I'm unable to set the DNS server addresses, as this is a work computer and I don't have the administrative privileges.
How bad is it to just turn the Firewall on the Mac off when I want to use the connection?

Help with LTE and Internet Sharing for BUIlD Lumia...

Nokia,
I received the Lumia 920 when I was at BUILD 2 weeks ago. I followed the instructions and the phone mostly works on AT&T. I had a 900 so I assumed my LTE and Internet Sharing plan would easily transfer. Unfortunately that does not seem to be the case. I called AT&T gave them my IMEI number but it's not in their system and is not recognized as a Lumia 920. Because this is not an "AT&T phone" they wouldn't do much more to help. My data connection only ever shows 4G, never LTE as my 900 does and I cannot enable Internet Sharing even though it's on my data plan. I believe this is all controlled by the IMEI number.
Is there anything Nokia can do to help us? I can't imagine I'm the only one having this problem! I'm going to try again to see if I can get the issue escalated and maybe they can force the IMEI number to be recognized as a 920.
Thanks!

Sorry I never came back to update. The fix, as has been noted already, is to make sure AT&T has your IMEI as another 920 or your old 900 so that you get LTE (which appears as "4G"). Then, in the Nokia Access Point config setting (under System Config), make sure LTE2 is selected, then install an additional keyboard (I tried both Spanish and Chinese). This will force an OTA update that seems to enable Internet Sharing. I had to redo it a second time when I updated my Nokia Access Point app last week, but I just re-installed a NEW keyboard and got Internet Sharing back. It hasn't gone away since, contrary to what others have experienced. For more info (and where I found the fix) see this XDA thread: http://forum.xda-developers.com/showthread.php?t=1971997

Need Help with setting up this Filter

Hi,
I need help making a filter sound like the one used in this youtube song.
I tried setting it up but I've had no success; even though I know for a fact that this filter was made in Logic Pro 9 according to the maker of this song.
I think there might be a bit of 'Fuzz-Wah' in there too but I've never really used that effect so any tips on that would be great, too.
Link: http://www.youtube.com/watch?v=tf017M8SZZE&feature=plcp
Any help with this would be widely appreciated.
Thank you :-)

It sounds like a simple hi Q filter sweep to me but getting close to the original synth sound that it is being used on is the challenge. It might well be that it is the filter on the synth itself is what is being swept. Either way, turn up the filter resonance on a band pass filter and sweep it with the lfo or adsr to modulate the filter cutoff if its the synth filter, or automate the filter frequency sweep if you use the channel filter.

Need help with Set-ADUser command

I need a little help with the following command. Im new to PS and I have found this command but it is only one user at a time. I need to be able to update ALL users in AD.
My goal is this. Someone before me set all Users Home numbers to 1234567899 and I need to remove that and leave it blank. The command below allows me to do that but only one user at a time by entering their SAMID.
Is there a way to do this for everyone in AD ?
Set-AdUser –Identity SAMID –HomePhone $NULL

Yeah sure -
Get-Aduser -filter * -properties SamaccountName | Select SamAccountName | % {Set-Aduser -identity $_.SamaccountName -HomePhone $null}

Need HELP with setting up my email on new 4g ipod touch.

I need help setting up my email on my 4g ipod touch. I just got it today and had a 1st gen and it worked fine. I need help setting it up again.
Any help would be appreciated
Thanks in advance.
Pam

http://www.apple.com/support/ipodtouch/assistant/sendmail/

Need help with setting up VPN on a Cisco EPC3925 Modem

Hi everyone,
I need help setting VPN on Cisco EPC3925 modem (I tried using Help and I have read the entire section in the manual but the manual is not the same as the window I get in my settings. For example in the manual they say I can choose "all" under Remote Secure Gateway but there is no option like that).
When I go to the VPN section this is what I get:
1. Does this mean that I can connect to my modem via VPN from some other location? I would like to be able to connect to this modem when I am not at home from some remote location from my computer in order to be able to use NAS-Storage.
2. If the answer on the first question is yes, what settings I need to enter for the:
Local Secure Group
Remote Secure Group
Remote Secure Gateway
My ISP is using dynamic IP but I have DDNS.
My router local IP is 192.168.0.1
Subnet: 255.255.255.0
Starting IP Address: 192.168.0.10
Here is how the advanced settings looks like:
Thanks in advance for your help!

My problem similar too this. I create a tunnel between two epc3925 but impossible to send data between them.
The status is connected. What can I do? UPC tell me this router has only vpn client so i will doesn't work.

Need help with set-up

Hello,
I gave my son an Iphone 4 to use. He is in the military overseas now and let his phone for another sibling to use while deployed. Problem is he wiped it clean but it is still asking for the email/password to set up since its still connected to his account.
Problem is I don't know this info and neither does he. It's been over a year already and he has no clue. The email retrieval doesn't work because he doesn't have access to emails. HELP!!!
Is there anyway to get past the logon screen??
Thanks.

Hey blaub6,
Thanks for the question. Your son will need to gain access to his Apple ID account to unlock this device. Find my iPhone Activation Lock is designed to lock the device from use from anyone other than the owner. If you son needs help gaining access to his Apple ID account, he can use the following resources as a starting point:
How to find your Apple ID - Apple Support
http://support.apple.com/en-us/HT201354
If you forgot your Apple ID password - Apple Support
http://support.apple.com/en-us/HT201487
Additional information about Find my iPhone Activation Lock:
Find My iPhone Activation Lock - Apple Support
http://support.apple.com/en-us/HT201365
Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
http://support.apple.com/en-us/HT201441
Thanks,
Matt M.

Need help with Z10 getting Internet

Summary: I bought BB Z10 in Indonesia and they said it was unlocked for Europe.
OS release 10.1.0.273 installed last week after replacing factory settings. SiM card is newly purchased at Tele 2 and internet works well in my other BB (BOLD) but not in Z10.
The PIN code 0000 is taken off so I boot the Z10 without a PIN.
With other SIM (other provider) in Z10 everything works properly.
All institutions for internet on Z10 are correct, just do not have 4G.
Have also APN internet.tele2.nl completed and authentication type to PAP. Tele2 geeft aan dat gebruikersnaam en wachtwoord niet nodig zijn. Then it comes: .... "save" does not work because then the fields are empty again.
Customer service indicates that it is not because of Tele2 SIM coz it works in other BB..
So, who has similar experience and know possible solution?

The most current iOS version is 8.1.3.
It is a iPad Air (WiFi only). You need a WiFi connection for internet.
Settings > WiFI > Select your network & enter the password for the network

I need help with setting 2 decimal places

I am using netbeans to create a GUI. My math works I need help formatting the result to 2 decimal places.
Thanks for any help.
This is part of my code..
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
// Regular button
double RegularPrice = 3.09;
double num1, result;
num1 = Float.parseFloat(jTextField1.getText());
result=RegularPrice * num1;
jLabel2.setText(String.valueOf(result));
}

http://java.sun.com/j2se/1.5.0/docs/api/java/text/DecimalFormat.html

Need help with set-up process

Hi there, I am not tech expert hence I would require some help and clarifications. I bought an airport express recently. I own a Acer Netbook running on Windows Vista, iPad wireless version and a iPhone 3Gs.
My purpose of buying the airport express was to create another wireless network and because I travel, I would like to use the airport express to allow my iPad and iPhone to connect wirelessly as most of the hotels only provide me with an Ethernet cable.
Questions are....
1) How do I do the initial set up? I cannot seem to set up my airport express using my netbook. It can't seem to detect. I have followed the following instructions.
- Install the airport express utility.
- Plug the airport express for power.
- Open the utility, it has detected the base station.
- Selected the option on setting up a wireless network.
- It configured on its own.
However, it doesnt work now, what do I do? Anybody who has simpler instructions for a noob like me?
Also, once I am done with this initial set up and when I go overseas, is it as simple as plugging in their ethernet cable into my airport express and I can connect my ipad and iphone wirelessly?

Welcome to the discussions!
+My purpose of buying the airport express was to create another wireless network and because I travel, I would like to use the airport express to allow my iPad and iPhone to connect wirelessly as most of the hotels only provide me with an Ethernet cable.+
+1) How do I do the initial set up? It can't seem to detect.+
The AirPort Express is broadcasting a default wireless network with a name like Apple Network xxxxxx. You need to log on to this wireless network on your PC first, then open AirPort Utility to configure the device.
Any Windows box is going to have issues with the Windows firewall blocking an attempted connection or your anti-virus software may be doing the same thing. You may need to turn both of these off in order to establish a connection between AirPort Utility and the AirPort Express.
You might also try to connect an ethernet cable directly from the computer to the AirPort Express.
*Open AirPort Utility - Click Manual Setup*
*Click the Base Station tab* below the row of icons
Name your Express, assign a device password and adjust Time Zone settings
*Click the Wireless tab*
Wireless Mode = Create a wireless network
Wireless Network Name = Your choice
Radio Mode = 802.11n (802.11 b/g compatible)
Channel = Automatic
Security = WPA2 Personal or WPA/WPA2 Personal
Password = Your choice
Confirm Password
*Click the Internet icon*
Connect Using = Ethernet
Connection Sharing = Off Bridge Mode
*Update to save settings*
When you are at the hotel, connect an ethernet cable from the hotel's jack to the AirPort Express and power up the Express. Open your browser and hotel's log in page will appear so that you can agree to terms and pay the fees.

Need help with setting up Internet sharing to PS3

Similar Messages

Maybe you are looking for