Need Help with sharing HD again please!

Upon installing my new AEBS, I have problems with my USB HD appearing on the wired computer. The HD would mount without a problem on the machines that were connected via wireless, but my iMac in which I connect to the AEBS via an Ethernet cable would not mount the HD. Finally, for no apparent reason, the drive appeared. Then just yesterday, the drive disconnected itself, or did something and is no loner there. So I reformatted my HD to make sure everything was clean and I had the correct format on the drive. Now when I connect the HD to the AEBS, I see the drive in the settings of the airport utility, but the drive is not mounting so I can access it. What do I need to do to access my HD on the wired computer?

Correct. If i connect the usb HD directly to the iMac everything is fine. When I connect it to the AEBS station, I am unable to see it on the iMac which is connected to the AEBS via ethernet. ON the flipside, I am able to connect to the drive on my macbook when I connect wirelessly.

Similar Messages

Need help with threads?.. please check my approach!!

Hello frnds,
I am trying to write a program.. who monitors my external tool.. please check my way of doing it.. as whenever i write programs having thread.. i end up goosy.. :(
first let me tell.. what I want from program.. I have to start an external tool.. on separate thread.. (as it takes some time).. then it takes some arguments(3 arguments).. from file.. so i read the file.. and have to run tool.. continously.. until there are arguments left.. in file.. or.. user has stopped it by pressing STOP button..
I have to put a marker in file too.. so that.. if program started again.. file is read from marker postion.. !!
Hope I make clear.. what am trying to do!!
My approach is like..
1. Have two buttons.. START and STOP on Frame..
START--> pressed
2. check marker("$" sign.. placed in beginning of file during start).. on file..
     read File from marker.. got 3 arg.. pass it to tool.. and run it.. (on separate thread).. put marker.. (for next reading)
     Step 2.. continously..
3. STOP--> pressed
     until last thread.. stops.. keep running the tool.. and when last thread stops.. stop reading any more arguments..
Question is:
1. Should i read file again and again.. ?.. or read it once after "$" sign.. store data in array.. and once stopped pressed.. read file again.. and put marker ("$" sign) at last read line..
2. how should i know when my thread has stopped.. so I start tool again??.. am totally confused.. !!
please modify my approach.. if u find anything odd..
Thanks a lot in advance
gervini

Hello,
I have no experience with threads or with having more than run "program" in a single java file. All my java files have the same structure. This master.java looks something like this:
---master.java---------------------------------------------------
import java.sql.*;
import...
public class Master {
public static void main(String args []) throws SQLException, IOException {
//create connection pool here
while (true) { // start loop here (each loop takes about five minutes)
// set values of variables
// select a slave process to run (from a list of slave programs)
execute selected slave program
// check for loop exit value
} // end while loop
System.out.println("Program Complete");
} catch (Exception e) {
System.out.println("Error: " + e);
} finally {
if (rSet1 != null)
try { rSet1.close(); } catch( SQLException ignore ) { /* ignored */ }
connection.close();
-------end master.java--------------------------------------------------------
This master.java program will run continuously for days or weeks, each time through the loop starting another slave process which runs for five minutes to up to an hour, which means there may be ten to twenty of these slave processes running simultaneously.
I believe threads is the best way to do this, but I don't know where to locate these slave programs: either inside the master.java program or separate slave.java files? I will need help with either method.
Your help is greatly appreciated. Thank you.
Logan

Need help with flash player installation please !!!!

Hello,
I need help with my flash player installation because every time I access a movie this is the message I receive.
This content on Xfinity TV is not available for viewing with Chrome's "Incognito" mode. To play this video using Chrome, please view this page without "Incognito" mode.
Still having problems? Try resetting your Flash player license.

Incognito mode is a Google Chrome setting when you open a new window (Cmd+Shift+N on a Mac Ctrl+Shift+N on Windows) It opens a "private" window with no cookies and no tracking. The problem with it is that when you disable cookies, your license files are not sent to the site (whetehr it's YouTube or xFinity or any other that uses license files for paid content) and it treats you as if you're a first time visitor. Paid videos won't play wihtout the cookies sending the license file info.
This isn't a Flash Player setting. It's in Chrome. I did some research and according to Google, "Incignito" mode is off by default, and can ONLY be activate by the keyboard shortcut. There IS a way to disable it from the registry http://dev.chromium.org/administrators/policy-list-3#IncognitoModeAvailability

I need help with printing labels. please

I need help with printing labels. thanks in advance

Welcome to Apple Support Communities.
In Address Book, first select a name or group of names to print.
Then File, Print, select Style, Mailing Labels, then Layout to select a specific target label (such as an Avery number), or define your own...

Need help with shared hyperlinks

I need help understanding the shared hyperlink option when creating hyperlinks in InDesign CS5 (Mac) and how to change a shared hyperlink destination.
I want to build a document that contains hyperlinks to files on the client’s server. The end use is to make a PDF in which the client can click on a hyperlink and it opens (for example) a Word document or another PDF on their server. When I started the project, I thought I would create shared hyperlinks because a single server document would be referred to by several links scattered through the InDesign document I was building.
From the Hyperlink palette fly-out menu I chose New Hyperlink, then Link To: File from the dropdown, and I clicked the Shared Hyperlink option, and then OK to close the window. I export the InDesign file as a print PDF, and the hyperlinks work.
Now I need to change the file paths, because the client moved their files to a new location. When I re-open the hyperlink in the Hyperlink palette by double clicking on it, the Edit Hyperlink window opens but it shows my link as:
Link To: Shared Destination (rather than File)
And the destination box underneath shows:
Document: [my document name]
Name [the file path I put in]
However, this link is not editable. I don’t understand why InDesign does this on its own.
I realize now that it was not necessary to tick the shared option when I built the hyperlink. Is there a way (a script? another method?) that I can remove the shared nature of the hyperlinks so that when I go to edit them they show as links to files (Link to: File, not Link to: Shared Destination) with a live Destination Path box where I can edit the link?
(If anyone tries to help with a script, note that my document also contains other hyperlinks to internet URLs and emails that I don’t want to disturb.)
Thanks for your consideration.

Well. I do feel sort of bait-and-switched, but...
I want to get the links back to the point where double clicking on the hyperlink name (number) in the Hyperlink palette opens an Edit Hyperlink dialog where the destination is Link to: File and the file path shows up in the File Path box as an editable string. Just the way I made them in the first place.
It's good that you're comfortable editing the IDML.
If you compare links made both ways in the IDML, the only distinction between the Shared and the not Shared seems to be the hidden attribute of the <HyperlinkURLDestination/> tag.
Allegedly you cannot edit this in Javascript (though you could, I suppose, create a new HyperlinkURLDestination with all the same properties and then chang eeach hyperlink to point to it).
But editing it in the IDML works fine. Open designmap.xml and change the Hidden="false" to Hidden="true". Of course, you only want to do that in the <HyerplinkURLDestination/> tags...
Something about this seems fishy to me, so you might want to verify it yourself in a single case before you put too much effort in. But I think it's right.

Need help with project (calling methods) please!!

Hi there i have a project for uni requiring me to create a java program that creates a random No. and lets the user have three guesses to find the No. When the users guesses correct he gets a message telling him hes won and if he doesnt get it correct he gets a message telling him the correct No then terminates.
The code has to call an outside method called[b] Public Static Boolean CheckGuess
I have tried to create this and got it to compile with no errors (eventually) but i keep getting a message saying i have whenever i type any number in. I think the problem is the way i am calling the method i havnt got much experience this is all pretty new to me any help would be really appreciated. Thanks.
import javax.swing.*;
import java.util.*;
public class Coursework1{
     public static void main(String args[]){
          int randomnumber,usersguessint,checkguess,guessvalid,attempts;
          String usersguess,output;
          boolean match;
          //create random number generator
          Random numGenerator = new Random();
          //generate a random number between 1 & 10 inclusive
          randomnumber = Math.abs(numGenerator.nextInt(9))+1;
          //initialize variable attempts
          for ( attempts = 0; attempts < 3; attempts++ ) {
               //ask user for his first guess
               usersguess=JOptionPane.showInputDialog("Please enter your guess between 1 & 10");
               //convert users guess to integer
               usersguessint = Integer.parseInt(usersguess);
                    //validate input
                    while (usersguessint<1||usersguessint>10){
                    usersguess=JOptionPane.showInputDialog("You entered an incorrect number \nPlease enter a numberbetween 1 & 10");
                     //convert users guess to integer
                    usersguessint = Integer.parseInt(usersguess);
                    } //end while loop
                         //call boolean method
                         if (match=true){
                         //display text area in JoptionPane
                         output="You won";
                         JOptionPane.showMessageDialog(null,output,"You Won",JOptionPane.INFORMATION_MESSAGE);
                         break;}
                         else{
                         output="Try again";
                         JOptionPane.showInputDialog("Try again");
                              }     //end if
               } //end for
          }//end main
                         //user defined method
                         public static boolean checkGuess(int usersguessint,int randomnumber){
                         boolean match = false;
                         if (usersguessint == randomnumber){
                         match = true;
                         return match;
                         }//end method
     }//endclass

Thank you very much that worked a treat the program is working better now. I have just realised that my for loopcontaining my counter may be in the wrong place as the program is running though both messages 3 times e.g
"Please enter your guess between 1 & 10"
"Try again"
"Please enter your guess between 1 & 10"
"Try again"
"Please enter your guess between 1 & 10"
"Try again"
"Please enter your guess between 1 & 10"
"Try again"
I want my program to run like
"Please enter your guess between 1 & 10"
"Try again"
"Try again"
"Try again"
Do u think if i placed my for stament (counter) in between the two messages it would eliminate this problem.

Need Help with Migration...Please

Hello,
I need help! I just bought a new MacBook Pro. In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS). I also have the iMac connected to a Time Capsule. Here are my questions:
1. As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook? Is there an issue running computers which are clones in the same environment? Is it a bad idea to migrate?
2. Assuming # 1 is okay to migrate, what is the best way? Is it best directly from the iMac or from the Time Capsule? I do have a Thunderbolt to Ethernet adapter on hand.
3. Is there a link that would help me navigate the migration?
4. How long should the migration in #2 take?
5. Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
6. Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
7. Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
Any help would greatly be appreciated. Thank you!

Hello,
I need help! I just bought a new MacBook Pro. In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS). I also have the iMac connected to a Time Capsule. Here are my questions:
1. As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook? Is there an issue running computers which are clones in the same environment? Is it a bad idea to migrate?
2. Assuming # 1 is okay to migrate, what is the best way? Is it best directly from the iMac or from the Time Capsule? I do have a Thunderbolt to Ethernet adapter on hand.
3. Is there a link that would help me navigate the migration?
4. How long should the migration in #2 take?
5. Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
6. Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
7. Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
Any help would greatly be appreciated. Thank you!

Need Help with new site glitches PLEASE!!!

I need help trouble shooting a website. The site is
www.farrowandwatkins.com. Nav buttons on Mac they display correctly
which is aligned at top and bottom of content to left on Home page.
However, when viewed on PC, the buttons spread to fill the
distance of the "Patients" Page. All the pages spread to this
length also, but are not suppose to.
Nav buttons have padding of 10 on bottom, except last one.
Please help if you can

First guess would be that there doesn't seem to be a fixed
height or width on the cell for the 'patients' button.

I need help with the https class please.

Hello, i need add an authentication field in my GET request using HTTPS to authenticate users. I put the authentication field using the setRequestProperty method, but it doesn't appear when i print all properties using the getRequestProperties method. I wrote the following code:
try{
URL url = new URL ("https://my_url..");
URLConnection conexion;
conexion = url.openConnection();
conexion.setRequestProperty("Authorization",my_urlEncoder_string);
conexion.setRequestProperty("Host",my_loginServer);
HttpsURLConnection httpsConexion = (HttpsURLConnection) conexion;
httpsConexion.setRequestMethod("GET");
System.out.println("All properties\r\n: " + httpsConexion.getRequestProperties());
}catch ....
when i run the program it show the following text:
All properties: {Host=[my_loginServer]}
Only the Host field is added to my HttpsURLConnection. The authentication field doesnt appear in standar output. How can i add to my HttpsURLConnection an Authentication field?
thanks

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

I need help with my wifi sync, please?

I am trying to sync a single band from my laptop to my iPhone. This is my new laptop and I have no transfered all my music from my old computer onto here, so I can not sync through the cable or else I will have to remove all my exsisting information on my phone, I do not have all my music on my laptop yet. All I want is to simply transfer a few songs from my iTunes to my phone wirelessly and I can't. I enabled the button when I plug in my phone that tells me I can sync wirelessly but when I disconnect it refuses to work. Please I need help.

Dear friend, by the moment Blackberry playbook is just for USA/Canada users, in a very short time RIM will announce the release of the product for the rest of countries.
Be patient when you can use it at 100%, you will be amazed!

I just bought my MacBook Pro 13" and I tried to install an anti virus but then it went into a grey folder with a question mark I need help with restoring the iOS please

I need help taking out the grey folder with the question mark and I've try everything except the CD thing because my MacBook didn't come with one so I really need help please

What anti-virus software did you install? Although there's a lot of bad anti-virus software out there, no anti-virus software should cause such a problem. A gray screen with a flashing question mark on a folder means that no bootable system could be found, which means that the system was badly damaged or corrupt. Even installing bad software would not normally cause that, so either there was something badly wrong with the system already or the anti-virus software you tried to install was really, really bad!
As mende1 says, you need to reinstall the system at this point. After your system is back up and running, read my Mac Malware Guide. If, after reading that, you want anti-virus software, use one of the programms recommended in that guide.

I need help with the navigation menu please?

I have been working my way through your six part printed instructions and I am styling the header and navigation menu. The bullet points disappeared which was correct and the tabs moved to the right, as they should, but one tab sits underneath another tab and all tabs are covered up by my main heading. This is dreamweaver CS6.
It looks a bit of a mess!

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

I need help with website can you please

Need help
Message was edited by: Liam Dilley - Phone number in here is a bad idea

Hi,
I removed your phone number as you will just get cold called
BC support does not call you for help and people here can help you here. Just saying "need help" is not much use though, we need to know what kind of help you need.

New to Java and need help with this program..please!

I'd really appreciate any helpful comments about this program assignment that I have to turn in a week from Friday. I'm taking a class one night a week and completely new to Java. I'd ask my professor for help, but we can't call him during the week and he never answers e-mails. He didn't tell us how to call from other classes yet, and I just can't get the darn thing to do what I want it to do!
The assignment requirements are:
1. Change a card game application that draws two cards
and the higher card wins, to a Blackjack application
2. Include a new class called Hand
3. The Hand class should record the number of draws
4. The application should prompt for a number of draws
5. The game is played against the Dealer
6. The dealer always draws a card if the dealer's hand total is <= 17
7. Prompt the player after each hand if he wants to quit
8. Display the total games won by the dealer and total and the total games wond by the player after each hand
9. Display all of the dealer's and player's cards at the
end of each hand
10. Player has the option of drawing an additional card after the first two cards
11. The Ace can have a value of 11 or 1
(Even though it's not called for in the requirements, I would like to be able to let the Ace have a value of 1 or an 11)
The following is my code with some comments about a few things that are driving me nuts:
import java.util.*;
import javax.swing.*;
import java.text.*;
public class CardDeck
public CardDeck()
deck = new Card[52];
fill();
shuffle();
public void fill()
int i;
int j;
for (i = 1; i <= 13; i++)
for (j = 1; j <= 4; j++)
deck[4 * (i - 1) + j - 1] = new Card(i, j);
cards = 52;
public void shuffle()
int next;
for (next = 0; next < cards - 1; next++)
int rand = (int)(Math.random()*(next+1));
Card temp = deck[next];
deck[next] = deck[rand];
deck[rand] = temp;
public final Card draw()
if (cards == 0)
return null;
cards--;
return deck[cards];
public int changeValue()
int val = 0;
boolean ace = false;
int cds;
for (int i = 0; i < cards; i++)
if (cardValue > 10)
cardValue = 10;
if (cardValue ==1)     {
ace = true;
val = val + cardValue;
if ( ace = true && val + 10 <= 21 )
val = val + 10;
return val;
public static void main(String[] args)
CardDeck d = new CardDeck();
int x = 3;
int i;
int wins = 1;
int playerTotal = 1;
do {
Card dealer = (d.draw());
/**I've tried everything I can think of to call the ChangeValue() method after I draw the card, but nothing is working for me.**/
System.out.println("Dealer draws: " + dealer);
do {
dealer = (d.draw());
System.out.println(" " + dealer);
}while (dealer.rank() <= 17);
Card mine = d.draw();
System.out.println("\t\t\t\t Player draws: "
+ mine);
mine = d.draw();
System.out.println("\t\t\t\t\t\t" + mine);
do{
String input = JOptionPane.showInputDialog
("Would you like a card? ");
if(input.equalsIgnoreCase("yes"))
     mine = d.draw();
System.out.println("\t\t\t\t\t\t" + mine);
     playerTotal++;
     else if(input.equalsIgnoreCase("no"))
System.out.println("\t\t\t\t Player stands");
     else
System.out.println("\t\tInvalid input.
Please try again.");
I don't know how to go about making and calling a method or class that will combine the total cards delt to the player and the total cards delt to the dealer. The rank() method only seems to give me the last cards drawn to compare with when I try to do the tests.**/
if ((dealer.rank() > mine.rank())
&& (dealer.rank() <= 21)
|| (mine.rank() > 21)
&& (dealer.rank() < 22)
|| ((dealer.rank() == 21)
&& (mine.rank() == 21))
|| ((mine.rank() > 21)
&& (dealer.rank() <= 21)))
System.out.println("Dealer wins");
wins++;
     else
System.out.println("I win!");
break;
} while (playerTotal <= 1);
String stop = JOptionPane.showInputDialog
("Would you like to play again? ");
if (stop.equalsIgnoreCase("no"))
break;
if (rounds == 5)
System.out.println("Player wins " +
(CardDeck.rounds - wins) + "rounds");
} while (rounds <= 5);
private Card[] deck;
private int cards;
public static int rounds = 1;
public int cardValue;
/**When I try to compile this nested class, I get an error message saying I need a brace here and at the end of the program. I don't know if any of this code would work because I've tried adding braces and still can't compile it.**/
class Hand()
static int r = 1;
public Hand() { CardDeck.rounds = r; }
public int getRounds() { return r++; }
final class Card
public static final int ACE = 1;
public static final int JACK = 11;
public static final int QUEEN = 12;
public static final int KING = 13;
public static final int CLUBS = 1;
public static final int DIAMONDS = 2;
public static final int HEARTS = 3;
public static final int SPADES = 4;
public Card(int v, int s)
value = v;
suit = s;
public int getValue() { return value; }
public int getSuit() { return suit; }
public int rank()
if (value == 1)
return 4 * 13 + suit;
else
return 4 * (value - 1) + suit;
/**This works, but I'm confused. How is this method called? Does it call itself?**/
public String toString()
String v;
String s;
if (value == ACE)
v = "Ace";
else if (value == JACK)
v = "Jack";
else if (value == QUEEN)
v = "Queen";
else if (value == KING)
v = "King";
else
v = String.valueOf(value);
if (suit == DIAMONDS)
s = "Diamonds";
else if (suit == HEARTS)
s = "Hearts";
else if (suit == SPADES)
s = "Spades";
else
s = "Clubs";
return v + " of " + s;
private int value; //Value is an integer, so how can a
private int suit; //string be assigned to an integer?
}

Thank you so much for offering to help me with this Jamie! When I tried to call change value using:
Card dealer = (d.changeValue());
I get an error message saying:
Incompatible types found: int
required: Card
I had my weekly class last night and the professor cleared up a few things for me, but I've not had time to make all of the necessary changes. I did find out how toString worked, so that's one question out of the way, and he gave us a lot of information for adding another class to generate random numbers.
Again, thank you so much. I really want to learn this but I'm feeling so stupid right now. Any help you can give me about the above error message would be appreciated.

Need help with icloud activation lock please

hi firends
i have be dragged by apple for last 3 weeks or so i had purchased a device in new zealand with orignal proof of purchase submitted to apple icloud team and the best part is they re validate it with the pervious owner and got the same copy if purchase from them when i try to call them up they said they have submitted to the concern department for unlocking and yesterday i get an email saying they cant do it as the shop who sold in new zealand has bought it from USA and now they need the receipt from there to make it work where all legal check up was done and everything is crystal clear APPLE IS JUST HARASSING me for no reason this why people now do want to promote APPLE when a genuine case is presented to them with complete info from seller to buyer and all documents they not ready to unlock it. i highly request every one to please raise this type of concern and get this one voice to TIM COOK AND HIS TEAMthat why genuine person are being left behind where the same icloud can be unlocked by paying to hackers who help people like us to trust them more then APPLE.
I hope MR. TIM COOK read this and have a good look into helping genuine person who are stuck with this type of issues please.
thanks again guys for reading my sad story.
cheers
3horse

How the lock works is explained by Find My iPhone Activation Lock and Find My iPhone Activation Lock: Removing a device from a previous owner's account.
On YouTube you will find some videos helping bypassing the lock and get access to the contacts. With some luck you can contact the previous owner and force him to remove the iPhone from the devices list at icloud.com/find.

Need Help with sharing HD again please!

Similar Messages

Maybe you are looking for