Need help with Shockwave flash object by adobe systems it's an add ons

Please any help you can give me as I can't figure
out what is wrong I disable the add on but then I can't load any of
my games without it but when it is enabled I keep getting the fatal
error browser must close, the only options that I have are to
enable it or disable it and neither one is working properly for me
so PLEASE help me and tell me what I can do to resolve this
stubborne issue!!!! Thanks Treblinka4444

Similar Messages

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

Need Help with a Flash Web Project

Hello, everyone. I am trying to use Flash to make a two-step
system. I want the flash document to, first, allow a person to
upload multiple image files and then, second, for the flash
document be able to create a slideshow with the uploaded images and
fade in and out from each image until the slideshow is over. I want
it to be where the flash document creates its own slideshow with
the images that are uploaded in the first step that I mentioned. I
want it to do it completely on its own so I need to know how to
give it the proper AI so that it can do this task.
So, are there any tips that anyone has on how to do this? Can
anyone tell me exactly how to do this? I really need help with this
for my new website project. Thanks in advance, everyone!

The problem with the text not appearing at all has to do with you setting the alpha of the movieclip to 0%. Not within the movieclip, but the movieclip itself. The same for the xray graphic, except you have that as a graphic symbol rather than a movieclip. To have that play while inhabiting one frame you'll need to change it to a movieclip symbol.
To get the text to play after the blinds (just a minor critique, I'd speed up the blinds), you will want to add some code in the frame where you added the stop in the blinds animation. You will also need to assign instance names for the text movieclips in the properties panel, as well as place a stop(); in their first frames (inside).
Let's say you name them upperText and lowerText. Then the code you'd add at the end of the blinds animation (in the stop frame) would be...
_parent.upperText.play();
_parent.lowerText.play();
The "_parent" portion of that is used to target the timeline that is containing the item making the command, basically meaning it's the guy inside the blinds telling the guy outside the blinds to do something.
You'll probably want to add stops to the ends of the text animations as well.
If you want to have the first text trigger the second text, then you'd take that second line above and place it in the last frame of the first text animation instead of the blinds animation.
Note, on occasion, undeterminably, that code above doesn't work for some odd reason... the animation plays to the next frame and stops... so if you run into that, just put a play(); in the second frame to help push it along.
PS GotoandPlay would actually be gotoAndPlay, and for the code above you could substitute play(); with gotoAndPlay(2);

I need help with this tutorial from the Adobe website

I'm almost done with my flash game which I created with flash pro cc. And i have been looking for tutorials to integrate my game to the Facebook and this is the only one I found. http://www.adobe.com/devnet/games/articles/getting-started-with-facebooksdk-actionscript3. html
Am I on the right track?? The editor uses Flash Builder but I'm using Flash Pro cc.
--- On Step 2: "Set up a development server for the Flash app",
Sub-step #2. "To simplify the development process, configure Flash Builder to compile into your htdocs/fbdemo folder and run (or debug) the app on your server (see Figure 2)."
1) But I can't find "ActionScript Build Path"(which is highlighted on the Figure 2 screenshot) or anything like that in Flash pro. Same for the "Output folder URL".
Can I actually do the same things with Flash Pro cc?? Also #3 is "Verify that your app runs from your server." How do you run your app from your server??
---- On Step 4: "Initialize the Facebook JS SDK",
2) so if I setup a server on a localhost just like the tutorial, I don't need to change the following? This is on line #6.
channelUrl : 'www.YOUR_DOMAIN.COM/channel.html'
can i just leave it like that ?
3) So if I complete the tutorial, can facebook users play my game? or do i have more things to do?
4) is there any other tutorial for Flash Pro CC to Facebook integration???
Thank you so much for your help and time.

this is an excerpt from http://www.amazon.com/Flash-Game-Development-Social-Mobile/dp/1435460200/ref=sr_1_1?ie=UTF 8&qid=1388031189&sr=8-1&keywords=gladstien
The simplest way to hook into Facebook is to add their Plugins to add a Like button, Send button, Login button etc to your game. If you only want to add a Like button to a page on your website, you can use the following iframe tag anywhere (between the body tags) in your html document where you want the Facebook Like button to appear:
<iframe src="http://www.facebook.com/plugins/like.php?href=yoursite.com/subdirectory/page.html" scrolling="no" frameborder="0" style="border:none; width:500px; height:25px"></iframe>
Where the href attribute is equal to the absolute URL to your html file. For example:
<iframe src="http://www.facebook.com/plugins/like.php?href=kglad.com/Files/fb/" scrolling="no" frameborder="0" style="border:none; width:500px; height:25px"></iframe>
points to index.html in kglad/com/Files/fb.
However, to get the most out of Facebook you will need to use JavaScript or the Facebook ActionScript API and register your game on the Facebook Developer App page. Before you can register your game with Facebook, you will need to be registered with Facebook and you will need to Login.
Once you are logged-in, you can go to https://developers.facebook.com/apps and click Create New App to register your game with Facebook. (See Fig11-01.)
***Insert Fig11-01.tif***
[Facebook's Create New App form.]
Enter your App Name (the name of your game) and click continue. Complete the Security Check (see Fig11-02) and click Submit. You should see the App Dashboard where you enter details about your game. (See Fig11-03.)
***Insert Fig11-02.tif***
[Security Check form.]
***Insert Fig11-03.tif***
[App Dashboard with Basic Settings selected.]
If you mouse over a question mark, you will see an explanation of what is required to complete this form. Enter a Namespace, from the Category selection pick Games, and then select a sub-category.
Your game can integrate with Facebook several ways and they are listed above the Save Changes button. You can select more than one but for now only select Website with Facebook Login and App on Facebook, enter the fully qualified URL to your game and click Save Changes. (See Fig11-04.)
***Insert Fig11-04.tif***
[Facebook integration menu expanded.]
You can return to https://developers.facebook.com/apps any time and edit your entries. Your game(s) will be listed on the left and you can use the Edit App button to make changes and the Create New App button to add another game.
Click on the App Center link on the left. (See Fig11-05a and Fig11-05b.) Fill in everything that is not optional and upload all the required images. Again, if you mouse over the question marks you will see requirement details including exact image sizes for the icons, banners and screenshots.
***Insert Fig11-05a.tif***
[Top half of the App Center form.]
***Insert Fig11-05b.tif***
[Bottom half of the App Center form.]
When you are finished click Save Changes and Submit App Detail Page. You should then see Additional Notes and Terms. (See Fig11-06.)
***Insert Fig11-06.tif***
[Additional Notes and Terms.]
Tick the checkboxes and click Review Submission. If everything looks acceptable, click Submit. You should then see something like Fig11-07.
***Insert Fig11-07.tif***
[After agreeing with Facebook's terms, you should be directed back to App Center and see this modal window.]
You are now ready to integrate your game with Facebook's API. Because there is a Facebook ActionScript API that communicates with Facebook's API, you need not work directly with the Facebook API.
But before I cover Adobe's Facebook ActionScript API, I am going to cover how you can use the Facebook JavaScript API directly. There no reason to actually do that while the Facebook ActionScript API still works but by the time you read this, the Facebook ActionScript API may no longer work.
In addition, this section shows the basics needed to use any JavaScript API so it applies to any social network that has a JavaScript API including the next "hot" social network that will arise in the future.

I need help making Shockwave Flash 15.0 r0 work again.

It was working fine earlier today, on Google Chrome. But for some reason it stopped and now I get a something asking if i want to stop the plugin because it is not responding. I have tried to make it work on my own following some of the things i found only, and on here Installation problems | Flash Player | Windows and Flash Player Help yet nothing. I really need this fixed ASAP.
Adobe Flash Player (2 files) - Version: 15.0.0.189
Shockwave Flash 15.0 r0
Name:
Shockwave Flash
Description:
Shockwave Flash 15.0 r0
Version:
15.0.0.189
Name:
Shockwave Flash
Description:
Shockwave Flash 15.0 r0
Version:
15,0,0,152
this is what shows up in chrome://plugins/
yet this the image I am supposed to be able to see does not show up
Please and thank you for your help

Please ask your question on a forum for the Flash Player

I need help with new flash player constantly crashing

Ever since updating the flash player it is constantly crashing. I have updated firefox also which constantly crashes. Firefox is pointing the finger at the flash player..... I need someone who will work with me step by step as i am not a computer tech. The two websites i visit that the flash player crashes on is www.myspace.com while playing mobsters and mafia wars, and www.smallworlds.com which is a 3d interactive " chat room ". I have tried removing the flash player and going with an older version, but it continues to kick me to the updated version...Please help!

Hi, thanks for your Flash file info. You have the SWFlash.ocx that is old. Right click on that one and Remove/Delete it.
Your SWF plug-in is correct as well as the remainder of your Flash files. The SWFlash.ocx that needs removed is conflicting.
The Windows Firewall should be used. Now I see that you have not updated to the Windows XP Service Pack 3, which is the latest. I would recommend that you do that. Many improvements and security issues are included in that. You can go to the Microsoft site for that.
After you do that, Microsoft has the Microsoft Security Essentials which is a free program and has the Anti-Virus and Anti-Spyware features. It does not include a Firewall nor are there any browser add ons that would conflict with your browser, other add ons or Flash Player.
I'm not sure of the system requirements for the MSE, but check. You may need the updated Service Pack first. Before you Install the MSE tho, make sure no other anti-virus is still Installed. The one you mentioned needs Uninstalled and you need to check if they have an Uninstaller and do that first.
Whether you do any of what I suggested or not, you need to Remove that SWFlash.ocx. I would reboot(restart) your computer afterwards.
P.S. Firefox has updated to 3.6.8 and you can do that anytime.
Thanks,
eidnolb
Message was edited by: eidnolb add a P.S.

Need help with explanation of FRAPS to Adobe Pre Elements

Hello Everyone.
So I'm having this issue and its really holding me back. I am a complete hobbyist when it comes to editing and I'm trying to solve my issue where my fraps footage looks like garbage once imported into Adobe Pre Elements 9.
Now I wanted to get a newer version of Adobe because it seems to be a good starting place for me to get more into editing and its the only program I'm familiar with so I went ahead and bought Elements 11.
My settings are fine and I have made a post before about my issue and I have found the simplest answer I could find. but it makes no scene to me . I have no idea what a codec is and how to work these programs. I am looking for someone to explain to me what I have to do to keep my quality from fraps and import it into adobe and when its exported to actually look like its a 1080p Movie rather than what I'm having.
example movie of what the quality I have now...www.youtube.com/watch?v=8pJ8fl_g5R
I have watched a number of videos on what my settings and render out settings should be and they are correct.
This is the answer I found http://forums.adobe.com/thread/967201 Can someone explain this to me?
I am also considering XSplit is there similar problems with that recording program to with Adobe Elements?
would really appreciate a answer here rather than rummaging through threads because I am very new with the terms and end up not understanding how they solve the problem.
Thanks.

FFDShow is a "direct show" video application. Once, going back many years, Premiere (before either Elements, or the Pro versions) once used direct show for display. At about Premiere 5.0, that was changed, and Premiere began using its own display module. FFDShow is available from several sources, but many users of both PrPro and PrE have had issues with it, and it is usually tough to remove from a system. However, one trusted user and contributor here, Neale, found that FFDShow did help with some display problems on his computer, and some claim that Adobe T/S does recommend it, in some cases. Based on the problems, that so many others have encountered with FFDShow and several Adobe programs, I steer clear of it.
A video screen-cap program will capture at the computer's full screen resolution, or some portion of that, so if one has, say 1920 x 1080 for the display resolution, that will be the default capture resolution. What is stated by other posters is probably THEIR computer's screen resolution, and yours might well differ.
The HuffYUV CODEC is available free, but it is now rather long in the tooth. Many feel that the newer Lagarith Lossless, or UT Lossless, are better options, and both are free. In their cases, one would Export/Convert to MS AVI, but using the Lagarith, or UT CODEC, inside the AVI wrapper. It has been so long, since I last used HuffYUV, that I cannot recall if it was also wrapped in the MS AVI container, or not - just too long ago.
For more background on CODEC's, first see this article: http://forums.adobe.com/thread/440037?tstart=0 For even more info on CODEC's, see the link in Reply # 8.
Good luck,
Hunt

I need help with the newest version of Adobe. Youtube wil no longer work.

Today I just installed Adobe 10.3 etc. and I can't get Youtube to play videos anymore. I'm not at all a professional, and not that good at computers either. I just want my Youtube to play again. Any help would be appreciated. Thanks.

Try to install adobe shockwave player http://get.adobe.com/shockwave/ it should work

Need help with Installing Flash 9

First off, let me apologize if this is in the wrong forum, I couldn't really find a forum for my specific need.
I was running Flash 8 just fine, but then a video requested that I update to Flash 9, because that's the only way the video would play.
So I tried installing the PPC version, and right at the last file it needs to finish installing a window pops up saying "ERROR CREATING FILE, 1008:5,-5000 Access denied error."
Now all flash files won't work on my browser.

Did you enable "root user" according to "Mac Help" or did you set up a new user in the system preferences? If you did it according to Mac Help, then Flash should have been installed correctly. Did you try the other option first? That option, if it worked, would have installed Flash into the current user. How many different users do you have?
Post back if you still need help, maybe someone else will pick up on this that is better than I am about such problems.
Sorry that I haven't been much help.
Larry

Need help with editing flash

Hello everyone, I'm really new to flash and I have some problems with editing my flash file. Currently, I have a small flash application in a folder, containing various kinds of files such as AS, SWF, FLA, HTML. What I want to do is to change the text inside one of the buttons in the application. After doing some reasearching, I realized that I should probably make some changes to the FLA file(Quiz.fla for example) since Quiz.fla is the only FLA file in the folder. Therefore, I opened it using Adobe Flash CS5.5, what what I found out is that the Quiz.fla file is really different from other FLA files. It only shows a plain background when I open it, without showing the actual interface of the flash application. It does contain all the buttons and contants under the Library section on the right side of Adobe Flash . When I try to change the text inside the button then save-publish, the newly published SWF file would just be a static picture of the button I've changed and everything else is gone. Any help is greatly appreciated!

ya, that's why I'm confused. I've actually tried editing some sample flash FLA files and all I need to do is to edit them in the Library and it would work out. But this one seems to have some weird problems. I could actually send the application folder to you if you have some time to take a look at it. Thank you very much again for the help!

Need help with actionscript (flash professional)

Ok so its been a while since I've used flash and i need a
little bit of help. I've searched through the help books and tried
to figure it out on my own but im stuck.
I'm making a website for my music page using flash
professional on Mac OSX.
I'm trying to make a menu along the left side that when you
press the "more" button at the bottom of multiple other buttons it
will make the set of links (which i have as buttons) switch out
with another set of links. (also buttons)
I cant get this more button to do it though!
here is a link to my .fla file
http://rapidshare.com/files/196874495/website.fla.html
Help would be GREATLY appreciated.
Thanks.
-Ken

_parent tells the guy that's holding the movieclip (its
parent) to do something.
The reason I say something seems corrupted with the file is
because I took your button out of the movieclip and used it with
the code you had for the movieclip, which should have worked as you
had it on(release){ gotoAndPlay(2)} because for whatever reason,
buttons don't consider the guy holding them as their parent...
bitter adopted orphans I reckon.
but it didn't work, and I gave up trying to figure out why.
Sometimes files just need to find a new home in another
file.

I need help with a flash nav and switching pages!!!

is there anyway to point the browser to play a swf file from
a specific point (labeled frame) in the movie after switching
(html) pages?
basically it's a nav bar that needs to be played from the end
of the movie after the first opening (html)page.
I know i can do this with frames, but i would love to avoid
that if possible. and the only other option i know would be to have
2 swf files. there has to be a "on(load) /gotoandplay() or some
combination to make this work, it seems to be too close to not be
possible.
thanks for all the help.

SHouldn't be too involved. Just set a variable with JS (or
whatever
language you can use, I used JS simply b/c you stated HTML
pages, not PHP or
ASP), then in your flash movie, have your first frame do a
basic if/then or
do a switch (if it's available in AS).
if ($var==1){
gotoAndPlay (1,1);
elseif ($var--2){
gotoAndPlay(1,2);
etc.
Alternately, you could set a session variable, but you would
have to have
dynamic pages to do that.
"Dminadeo" <[email protected]> wrote in
message
news:elkjne$gei$[email protected]..
>
quote:
Originally posted by:
Newsgroup User
> You could have your pages set a value on them, and read
that value into
> flash.
>
> Ie, say your value is set via javascript. I would
imagine you could then
> pass that to yoru flash movie, which would reference the
place to start
> before actually starting the movie.
>
> HTH,
>
> Jon
>
>
> that sounds a little more involved than i thought it
would be, but i'm
> willing
> to give it a shot. any other pointers?
> thanks again
>
>
>

Need help with a flash template

I'm an action script novice, so I downloaded a cool Flash template to beef up a part of a project I'm working on.
That template rotates thumbnails of web sites in a 3D space.
When user clicks on them they launch a new web page.
What I did:
I substituted the web thumbnails with characters and each character has an swf (info on each character) that i would like to load when user clicks on that character. Now, this thumbnail swf is loaded into a holder within a main movie when user clicks on "The Sensetionals" of the main buttons (in that main movie).
What I want to do:
1. When user clicks on each charater, I would like that character's swf to load into the same holder as the thumbnail swf.
Then I would have a close button that will unloadmovie that character swf and load back the thumbnail swf.
2. In the thumbnail swf, i would like to see the names of each character when user rolls over them. It's in the original code now, and shows up when I test the thumbnail swf on its own, but it's not showing up when it plays inside holder of the main movie. AND it's under the shadow/reflections, not readable. So, I would like to see it show up AND on top of the reflections.
Here's the link to view my version.
NOTE: ENTER ENGLISH ONLY
http://www.sensetionals.com/SenseTest/
I hope that's clear and not asking too much, but I'm really stuck and desperate here.
Any help would be greatly appreciated!
Here's the current code inside the thumbnail source file:
stop();
// total is length of label_list OR link_list
// OR total frames inside "flashmo thumbnails"
var total:Number = 13;
// length of label_list array and length of link_list array must be equal
// to length of frames inside "flashmo thumbnails" movieclip
var label_list:Array = new Array( "Dr Anatomy", "Feelix", "Eyeris", "T Buds", "Earl", "Nosey", "Dr Von Micron", "Karlos", "Tiny", "Funguy", "Protozoom", "Virusam", "Bacterio");
var link_list:Array = new Array("AnaTomyMov.swf", "FeelixMov.swf", "EyerisMov.swf", "BudMov.swf", "EarlMov.swf", "NosieMov.swf", "VonMicronMov.swf", "KarlosMov.swf", "TinyMov.swf", "FunguyMov.swf", "ProtozoomMov.swf", "VirusamMov.swf", "BacterioMov.swf");
var radiusX:Number = 330;
var radiusY:Number = 90;
var centerX:Number = 400;
var centerY:Number = 140;
var speed:Number = 0.005;
tn_group_mc._visible = false;
info.text = ""; fm_label.text = "";
for (var i = 0; i<total; i++)
var t = tn_group_mc.duplicateMovieClip("tn"+i, i);
t.tn_mc.gotoAndStop(i+1); t.tn_shadow_mc.gotoAndStop(i+1);
t.fm_label = label_list[i];
t.fm_url = link_list[i];
t.angle = i * ((Math.PI*2)/total);
t.onEnterFrame = mover;
t.fm_button.onRollOver = function()
fm_label.text = " " + this._parent.fm_label;
t.fm_button.onRollOut = function()
info.text = ""; fm_label.text = "";
t.fm_button.onRelease = function()
getURL(this._parent.fm_url);
function mover()
this._x = Math.cos(this.angle) * radiusX + centerX;
this._y = Math.sin(this.angle) * radiusY + centerY;
var s = this._y /(centerY+radiusY);
this._xscale = this._yscale = s*100;
this.angle += this._parent.speed;
this.swapDepths(Math.round(this._xscale) + 100);
this.onMouseMove = function()
speed = (this._xmouse-centerX) * 0.0001;

Hi
Press F1 inside Flash, this brings up Help. In the text box
at the side of Search - enter Multilingual Content.
This gives you a sample for using several languages.
Hope it helps

Need help with installing Flash media server

How xan i configure my existing apache server to work with flash meda server? I dont want of install apache server coming along with the setup?

I suppose this query is duplicate of this http://forums.adobe.com/thread/877615?tstart=0 - so please refer other post for answer to your queries.

Need Help With 1720 Flash

I have two 1720 routers. Router "A" is in production and properly configured. Router "B" needs to be cloned just like Router "A". I copied the IOS and running-config to a TFTP server. I followed the Cisco disaster recovery process for TFPT
reccovery and now the router will boot the IOS. However once it's up I can't ping the TFTP server even though it downloaded the IOS. Any ideas would be appreciated.
Thanks!

rommon 1 > boot
program load complete, entry point: 0x80008000, size: 0x2e5d0c
Self decompressing the image : #################################################
######################################################################### [OK]
Restricted Rights L
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.1
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 05-Jul-00 17:07 by cmong
Image text-base: 0x80008088, data-base: 0x805CDB90
cisco IPM (MPC860) processor (revision 0x500) with 49152K/16384K bytes of memory
Processor board ID FOC09171T0T (1264531100), with hardware revision 0000
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
32K bytes of non-volatile configuration memory.
Press RETURN to get started!
00:00:03: %LINK-4-NOMAC: A random default MAC address of 0000.0c83.369c has
been chosen. Ensure that this address is unique, or specify MAC
addresses for commands (such as 'novell routing') that allow the
use of this address as a default.
00:00:05: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
00:00:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed
state to up
00:00:06: %SYS-5-CONFIG_I: Configured from memory by console
00:00:06: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.1(3), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 05-Jul-00 17:07 by cmong
00:00:06: %DHCPD-2-SOCKET_ERROR: DHCP could not open UDP port 67.
Router>
Thanks for the help.

Need help with Shockwave flash object by adobe systems it's an add ons

Similar Messages

Maybe you are looking for