Need Help with Skipping Audio in Slideshows

I'm trying to burn a simple slideshow with iDVD of about 80 pictures, with an overlay .mp3 playing. I made the slideshow, and during the preview, the audio plays fine. But after I burned it, the mp3 skips slightly while the pictures change.
I initially thought the pix were too big, so I scaled them down from 400 to about 150 KB. But the second one had the same problem.
Is there anything I can do to fix this? It seems like what might be causing it is the page flip transition between pix. Is there any way I can keep the transition and get rid of the skipping? Thanks so much for the help.
I'm trying to finish this project ASAP, so thanks for the urgent response with any suggestions.
MacBook Mac OS X (10.4.6)

The disk image with DVD Player worked flawlessly.
That's what to expect from a burned DVD.
This just keeps getting more weird.
Not to me now that you're providing more info.
Two items of interest:
1.) I then took the DVD to another player in my house and it worked great.
Not all players handle recordable DVDs very well. Especially if they're older than a couple of years. I've had the worst permormance from Toshiba.
2.) The DVDs are DVD-R, Memorex.
TDK and Memorex have BAD track records here.
I recommend a disk image burned to Verbatim DVD-R at 4X or slower using Toast or Disk Utility.
David Pogue also recommends Verbatim on page 356 of his latest book:
iMovie HD & iDVD 6: The Missing Manual
Quoting David: "Cheaper brands don't use the same amount of organic dyes and are more likely to suffer premature deaths."

Similar Messages

Need help with skipping audio after upgrading to 10.9.1.

Having read the fine print, I now know that I should not have upgraded to 10.9.1 in the middle of a project. So, started with a brand new library/event/project and I am still getting dropped out audio. Video image is fine. When I scrub back and replay a clip, it sometimes plays better but still skips - only in new places.
Tech info: shooting with Canon C-100 converting files through Brosoft MTS (422 HQ - Audio pcm_s161e at 48000hz) using 2010 MacBook Pro with 345gb free on internal with 8gb of RAM and 380gb on Seagate external where files are located.
Any advice would be greatly appreciate. Oh yeah, happy new year....!

With all the updateing of stuff can you confirm which you changed.
Lastest MAC Operating System 10.9.1
Latest FCP X 10.1
Al

Need help with Conditional Audio

Hello again! So early on into a course, after a couple intro slides, I have a sorting slide to direct users to other parts of a course (self-led learning in a way). However, I have an audio narration that plays on entry to that slide (not slide audio, it plays via advanced actions). I'm trying to figure out a way so that once they have viewed that slide once and heard that audio the first time, any time they get sent back to this sorting slide, they don't hear the audio again. How might this be done?
What I have already tried: I've tried two things, first I set up a variable called Sort_Audio. On exit of the slide previous, Sort_Audio would be assigned a value of 10. On entry to the sorting slide, an advanced action would check if Sort_Audio is equal to 10. If it is, it plays audio (and clears another variable that is unrelated, I just needed to do both things, so I combined them). I have On Exit from the sorting slide an advanced action that resets Sort_Audio to 0 so that when a user gets sent back to that sorting slide, it would theoretically not star the audio. Problem with this in the first place is for some reason it won't even play the audio the first time.
The other thing I tried was quite similar, but instead of assigning values to slides I tried cpInfoLastSlideViewed and equalled it to the name of the previous slide, as well as doing the same thing for cpInfoPreviousSlide. Neither seemed to work.
Any help would be much appreciated! Thanks!

The problem is resolved. Using TTS, the audio went onto the slide. I had not removed it from the slide audio so that the Advanced Action could work. Lieve, I got it to work by being extra careful to get each step correct and complete and assuring that the slide didn't have audio attached to it. Rod, I could not get the test project to work with audio attached to a smart shape. I believe it is because I am not controlling visibility of the smart shape--a logic test for another project and another day.
Here is what I finally got to work:
I created a project to get the procedure working before I put it into the big project. Here is a description of the test project.
Slide one has a smart shape (not used as a button) and a button which goes to the next slide. There is slide audio that plays when the slide is viewed.
Slide two has a smart shape that is used as a button to go back to slide one.
First Test with simple Advanced Action (no increment of variable):
Variable used is called "v_visit"
Conditional advanced action is called "checker"
If v_visit is equal to 0
Then Play Audio "text to audio X" (created with TTS. I also tested it with recorded voice in a second test, "RecordingX.wav")Assign v_visit with 1
Else Continue
Slide one, on enter, execute Advanced Action "checker"
on exit, No Action
Second Test with different Advanced Action (variable increments):
Variable called "v_counter"
Advanced Action (conditional) called "menuAudioChecker"
First condition ("setCounter")
If 1 is equal to 1
Then Expression v_counter = v_counter + 1
(Else not used)
Second condition ("checkCounter")
If v_counter is equal to 1
Then Play Audio "Text to AudioX" or "RecordingX.wav"
(Else not used)
Slide one, On Enter Execute Advanced Action "menuAudioChecker"
On Exit, No Action
On this "Second Test" I added a smart shape to display the contents of v_counter and it counts as expected. As Lieve has indicated in other posts, if one desired a different audio to play based on the value of v_counter this would allow that to happen. In my case in the production project I could play audio associated with section 6 when they return to the menu after completing section 6.
Thank you for patiently working with me to resolve this issue (mostly due to my own oversights).
Most importantly, thank you for the excellent Advanced Action model to use for the project.
Michael

Need help with this audio!

Hi! I recently took a video which I then put on my computer (Mac OS X) and I just want the audio from it for my iPod (it has some music on it which I can't find in the iTunes store). I've tried extracting the audio from it using iMovie, but it won't import it with sound for that. It won't play the sound with GarageBand either. It won't let me share it with QuickTime either and I'm not allowed to buy QT Pro (I'm still a teenager and my parents say no) So does anybody know how I can get the sound from my video for my iTunes library and iPod? Thank you if you can help!

Well, I have never tried to do this, but I have an idea. Keep in mind I really don't know if it will work, I am just suggesting it.
I am not sure, but I would think that Adobe Premiere would have this functionality. Obviously you aren't going to buy the whole app (few hundred bucks), but they do offer a 30-day trial, which you might be able to take advantage of.
You also might want to Google something like "extract sound from movie OSX" (or something like that).
I hope this helps!

Need help with digital audio out on qip7232

Have seen lots of posts about digital and optical outputs from the QIP 7232. I want to run a digital, stereo, 2 channel LPCM signal out to a stereo receiver. There are posts on this forum that say that both outputs are disabled by Verizin. There are other posts that suggest various settings that could be tried but none of these have been confirmed to work. I have set the output to Stereo in the regular menu. I have set the output to LPCM in the hidden menu. Still, no audio output. I do have analogue output from the stereo left and right but want to get digital. Can anyone help ? Does anyone have either the digital or optical outputs working? Thank you Jim {Edited for privacy}

toslink cable will also work with MBP.

Need Help with "recording" audio to ADAT.

This is what I'm working with. Logic 9 to Saffire Pro 14 interface to Alesis ADAT 24.
I want to "record" audio to the adat. I want to have three tracks in a single song on the ADAT, lines 1,2,3. I have outputs 1,2,3 fromt the interface running to ADAT inputs 1,2,3.
In logic I have the tracks outputs set to mono 1,2,3. the ADAT is picking up all three tracks (all three meters are showing life). However, I am getting no sound out of output 3 (and therefore it is not recording into the ADAT) and I believe that 1 and 2 are coming in as stereo. Anybody know what I am doing wrong? I need this to run our tracks live for our show tomorrow and am having the worst luck!
(p.s. the interface only has four outputs.)

The Saffire comes with a software applet (setup program) doesn't it. Maybe you have to set up the 4 individual outs there, it may be set to send only stereo out.

Hi I need help with extracting audio.

Quick question, I have this music track that is basicaly a repeating beat with guitar riffs that play on top. Is there any way, using Soundbooth, that I can extract the two elements (Beat/Guitar) into seperate tracks so that I could edit them seperatly?
Thanks
John

It will definitely be difficult with Soundbooth, and depending on the source file, most other applications as well. Soundbooth doesn't have a Center Channel Extraction tool like Audition, so your options would be to use a different tool in an unexpected manner, or to perform some time-consuming manual extraction.
If the file is such that the beat exists on one channel and the guitar on the other, select File > Export > Channels to Mono Files. This is probably not the case, unless it's an old Dylan or Beatles recording.
Second, I might try selecting one loop of the beat with no guitar, and capturing this as a Noise Print. (Find this under Tasks > Clean Up Audio.) Once captured, select the entire file and apply a noise reduction. There is a (very) slight possibility this process will isolate the guitar. after saving the guitar as a new file, undo the noise reduction so you have your original file again, open the guitar file and capture the entire thing as a noise print, and apply this to the original file in Noise Reduction. Ideally, you would be left with the beat. Place these two files on separate tracks in Multitrack and you might get something that resembles the original track, but that allows you to modify levels or place effects on the beat and guitar separately.
Now, odds are very high that this just won't work, either. The Noise Reduction tool is not a scalpel for removing sounds, but is a fuzzy and dynamic tool to remove audio data that doesn't appear to belong.
You could also go back to your original file, open Soundbooths Spectral Frequency view be selecting Tasks > Remove a Sound, then use the lasso tool to painstakingly select the orange and yellow areas that represent the guitar parts, cut this selection and paste it into a new file of the same duration. When layered in multitrack, they would sound identical to the original file, but you'd have some control over the beat and the guitar part. This however, is still not ideal since any frequencies in the beat that overlapped the guitar would be moved to the guitar track. It would also be a TON of work.
So to save you time, I would highly recommend using a more advanced audio editing tool such as Audition. If you're using Windows, you can download a free 30-day trial at adobe.com. Using the center channel extractor effect, you can zero in on where the guitar part is panned in the stereo field and strip it out to a new file.
Good luck

PLEASE - Need help with system audio files

Hi guys, I'm going to try posting this one last night before throwing my hands up.
I'm having a problem with my MacBook Pro where certain audio, namely in browsers like FireFox or Safari, doesn't output.
YouTube and Google Video stream and display video content correctly, but no audio is output.
System audio such as notifications, as well as iTunes, doesn't seem to be affected.
I tried to follow the steps outlined in another post to check the output Hz setting for my midi device in the Audio MIDI Setup panel. However, this is what my panel looks like:
http://static.flickr.com/48/12917458198120c9319_od.jpg
It's simply blank, with "Output is not supported" displayed where those settings should be.
Any ideas as to the root of this problem? It's almost like I'm missing a .plist file or some other system file, maybe something that got deleted using AppZapper? That's just a wild guess from a recent Mac convert after browsing the forums
Thanks!

First off, it makes total sense that you see "Output is not supported" for you microphone. Change the "Properties For:" drop down to "Built in Output" or whatever output device you are using. You will then see the audio output format and frequencies, but on the left side it will say "Input is not supported"
Second, YouTube and Google Video don't use midi and so the Audio Midi Setup isn't really relevant to your problem at all and you should leave that alone... unless you are you a musician with a midi device setup. Perhaps this is the case, please post if it is. Otherwise you are headed down a blind alley messing with "Audio Midi Setup" to diagnose OR fix your issue.

Need help with my audio

Why won't the audio match up with the video on my computer?

Does it do this for all videos? It (the video) depends on the codec, its proper programming, its system requirements, etc.
Have you tried VLC Media Player? I swear by that player, and use it to playback TV on my underpowered eMachines Netbook and it works 100%
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Need help with no audio

hey guy's i can't seem to get any audio with my videos on the ipod, been looking through and i can't find any info, there no prob with the video just no audio, thank's guy's

sorry i didnt see the search on the right sorry for wasting space, found maad topics

Need help with editing audio...

I am in the processof editing a file that contains audio however I do not have the source audio files. Is there a way to extract the sound file (mp3) to an editor (wavepad)... so that I can edit it and replace it?

Make a new Flash movie, drag the sound file that you want into the Library of this new movie. Add the sound file to the timeline and extend the timeline to show the whole sound. Save the movie. Export a Quicktime video of that movie. Use no compression. You can now export the sound from this .mov file using Quicktime pro or any video editor application.

Need help with resizing audio regions

Hey guys,
When I resize an audio region it seems to snap to maybe 1/128th of the bar to the left or right of the beginning of a bar... (and it changes, sometimes like 1/64) for example:
I resize an audio region to end it on a bar and instead of it ending on 9 - 0 - 0 it ends on 9 - 0 - .05. So I have to zoom in horizontally to around 90% to get the region to "snap" to the beginning of a bar and its really time consuming.
This brings me to another question... how can I get logic to zoom in on the time identifier line? not just the middle of the view?
(example) my view port will be from -1 - 0 - 0 to like 30 - 0 - 0 but the timeline identifier is on 25 - 0 - 0 but it zooms into the middle of the view port to 14 - 0 -0
Any way to get it to snap to like 1/32 when resizing ?
Thanks
J

Never mind, i found it as soon as i asked.
THanks

Need help with M-Audio soundcard

To fill the final slot in my B&W I am trying to install a M-Audio Delta 1010 LT audio card. I am hoping to use it just for archiving and encoding a number of analogue sources, and for midi input and output. The latest driver installs fine, but when I install the card it boots into OSX for about a second and then the screen goes grayer and i get the "your system must be restarted" screen.
Any one been able to install one in a G3?
The M-Audio site says it will work in a 500Mhz G3. The card works fine in a windows box.

Sounds like good advice Christoph. I have been only recording bass thus far, very few effects and no latency yet. I was puzzled by the M-Audio manual that says to turn off the software monitor but on the M-Audio web site forum an expert says to turn on the monitoring in garageband. This will all makes sense to me soon I hope.

Help with Optical Audio, w/X-Fi Elite Pro, and Logitech Z-5

Hi,
I need help with optical audio on my X-Fi Elite Pro, and Logitech Z-5500 speakers. I have everything connected, and sound comes out, but NO 5. Surround. This is pissing me off beyond belief. I have it all connected, and set to 5. Surround, and on my Logitech's I have it set to opical in, and have tried ALL effects, stereo, strereo 2x,[Dolby Sign] PL II Movie, [Dolby Sign] PL II Music. I have tried the sound card set for an external decoder, and the sound cards' decoder, and tried both with all optical settings on the sound card. It doesn't give me surround with optical... And I would REALLY appreciate help.
My drivers are up to date.
Thanks for the help!!!!!!!!!!!
Yan N. B.

Except if you send DD/DTS multichannel sound to your receiver, you'll not have surround sound with digital connection. did you read the stikies?

Need help with audio...

Hi,
I need some help with an audio issue...a deep, buzzing sound which is so dominant, i can barely hear the rest
the situation:
older VHS tape (about 10 years) - i know some of you just cringed the video quality isn't the greatest, but not the worst. the audio is terrible.
transferred with my canopus av300 to my mac (g4 d1.25) - no issues
using FCP 4.5
i tried the AUGraphicEQ and since it was so deep, i reduced the following to 0:
800
6300
8000
reducing anything else doesn't seem to work
i've also tried cleaning in soundsoap both before using the AUGraphicEQ and after. If i clean it with SSoap before AUGraphicEQ, it sounds far better than the original track, but a low buzz is still present. using the EQ again doesn't seem to do much.
the camerawork was done on a tripod about 30 yds back. no mikes were used either. just the camera capturing both a/v.
Any thoughts on anything else to try? Any other filters? I fear the buzz is just with the main sound and no chance of completely killing it.
I can email someone a small sample file for them to play with if you like.
i'm really at my wits end b/c i would like to ensure i give the client as best i can (the other option would be to send the tape to a colleague's audio expert, but the price is something my client doesn't want to pay
Cheers,
Keebler

Got SoundTrack Pro? It will perform miracles with getting rid of unwanted sound. It's a matter of isolalating a few frames of the sound where no one is talking, and then using a simple command to remove that sound by itself from the entire audio track.
There is a possibilty that the Hum remover in FCP 4.5 might help...
Jerry

Need Help with Skipping Audio in Slideshows

Similar Messages

Maybe you are looking for