Need help with SMS Helper Driver for W520 Windows 7 64--bit

Greetings to all, I have a Windows 7 64--bit laptop. The solutions center indicates that that a driver for a device manager has not been installed. The message is for SMS Helper Driver (SMIHIP) STATUS not installed. Thank you. Ldxrunner

Did you install any third party plug-ins?
-> http://support.apple.com/kb/TS3430

Similar Messages

I need hp laserjet 1000 series driver for win 8 64 bit

i need hp laserjet 1000 series driver for win 8 64 bit
[Personal Information Removed]

Hi,
The printer is not supported on Windows 8 or Windows 8.1, a drevice is not available for the OS:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03450061
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Please i really need a big help hare. hp lj1300 driver for win 7 32 bit and 64 bit printer driver.

hi every one please i really need halp hare i have a hp LJ 1300 printer and i have been trying to install it on window 7 (32 bit and 64 bit). i have been looking for the LasarJet 1300 printer driver but i have not seen any. i even down loaded form hp web site. but it still did not work. after installing when u go to the divice mannger its showing the printer driver not found and then its not even printing. am using a usb and a laptop. i really need this driver for window 7. so i could get my work done. please some one help me hare.

Hi:
This 32 bit Intel graphics driver should work...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23884&lang=eng&ProdId=3719

I need help with a RSR232 driver for an embedded controller

Hi-
My controller currently communicates to a LCD screen via keywords and an RS232 connection to a PC (Hyperterminal). It recognizes certain words and will "reply". For example you can ask what temperature does the sensor read and it will print a number to the LCD.
I would like to do the same using Labview V7.1.
1. Do I need a specific driver or are generic RS232 drivers available?
2. Can I write my own driver and if so, how do I get started? Are there tutorials online somewhere?
Thanks-
Nora

LabVIEW uses a driver called VISA for serial communication. Open Measurement & Automation Explorer (MAX) and look at the software installed on your system. If NI-VISA is not listed, you need to install it from the drivers CD or you can download it. Click on the Support link a the top of the page.
There are shipping examples for serial communication. You can also use the Instrument I/O Assistant.

Help with T41 wireless driver for Win7

Hi, I have several Tseries (T40, T41, and T43) and I am migrating them to Win7. The T40 went fine, which has a Cisco wireless adapter. I am having trouble with my T41 model 2374-7FG MARG6.
Can you please direct me to the correct driver?
Can you please tell me which adapter I have? The matrix shows it can be three different types and I have tries all drivers, I think.
Thank you,
Rick

Rick, welcome to the forum,
you should have the Intel PRO/Wireless LAN 2100 3B Mini PCI adapter. According to the driver matrice site The Vista driver was available through Windows Update, have you tried running Win. Update to see if it finds it for you?
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Need neo 2 platinum sata driver for win xp 64 bit

i wont to install 64 bit windows on sata driver but i cant find any driver in downloads
thanks

davis5,
Download the latest nVidia nForce x64Drivers.
It has the SATA Drivers in it. If you need the Drivers for Install of the OS, just expand the Drivers and put the SATA & RAID Drivers on a floppy and you are set for the Install.
Take Care,
Richard

Need help reformatting my hard drive for mac only

Help please
Need help reformatting my hard drive for mac only with my toshishba hard drive

What Mac is this please, with what version of OS X?

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

[solved]Need help with a bash script for MOC conky artwork.

I need some help with a bash script for displaying artwork from MOC.
Music folders have a file called 'front.jpg' in them, so I need to pull the current directory from MOCP and then display the 'front.jpg' file in conky.
mocp -Q %file
gives me the current file playing, but I need the directory (perhaps some way to use only everything after the last '/'?)
A point in the right direction would be appreciated.
thanks, d
Last edited by dgz (2013-08-29 21:24:28)

Xyne wrote:
You should also quote the variables and output in double quotes to make the code robust, e.g.
filename="$(mocp -Q %file)"
dirname="${filename%/*}"
cp "$dirname"/front.jpg ~/backup/art.jpg
Without the quotes, whitespace will break the code. Even if you don't expect whitespace in any of the paths, it's still good coding practice to include the quotes imo.
thanks for the tip.
here it is, anyhow:
#!/bin/bash
filename=$(mocp -Q %file)
dirname=${filename%/*}
cp ${dirname}/front.jpg ~/backup/art.jpg
then in conky:
$alignr${execi 30 ~/bin/artc}${image ~/backup/art.jpg -s 100x100 -p -3,60}
thanks for the help.
Last edited by dgz (2013-08-29 21:26:32)

I need help with downgradeing my ios for my ipod touch 4th gen

i need help with downgradeing my ios for my ipod touch 4th gen

As has alwys been the case, you cannot go back.
Sorry

Help updating ATI graphics driver in bootcamp Windows 8.1 on iMac (Retina 5K, 27-inch) with 4 GHz Intel core i7, 16 GB 1600 MHz DDR3 and AMD Radeon R9 M295x 4096MB

Help updating ATI graphics driver in bootcamp Windows 8.1 on iMac (Retina 5K, 27-inch) with 4 GHz Intel core i7, 16 GB 1600 MHz DDR3 and AMD Radeon R9 M295x 4096MB

Of note there is a new AMD Catalyst Omega driver released earlier in the week that brings 5K resolution to AMD graphics cards. Here is the link (support.ad.com/en-us/download) to the AMD site. But none of these work with my iMac (Retina 5K, 27-inch, Late 2014), Windows 8 bootcamp.
Please advise.
Thanks in advace.

Help to find the driver for Satellite 1800-412

Kind time of day dear administrators of a forum and participants, help to find the driver for toshiba satellte s1800-412, beforehand thanks.
If there is an opportunity send on a mail [email protected]

Hi
This is a user to user forum dude ;)
If you want accept an advice from a simply common Toshiba notebook user then got to this site:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU#
Choose Archive Satellite Archive Satellite 18** - Satellite 1800-412
Enjoy ;)

Performance problems using WLS6.1 with the thin driver for Ora9i from OTN

Hello everyone,
Has anyone been experimenting with the thin driver for Oracle 9i under WLS6.1. I got it running, but
I get extremely bad performance when having multiple concurrent accesses. It works more or less in
single user mode. Also it seems not to support XA transactions?
When could we expect the driver from BEA to be out?
Thanks in advance!
Samuel Kounev
TU-Darmstadt, Germany

I had done this from the very beginning, but I was still getting very bad performance under
concurrent accesses. I even followed Sree's instructions and removed the old thin driver from
weblogic.jar, but this didn't help. I am now trying to get the OCI driver for 9i running and hope
this will solve the problem.
Samuel
Tamilselvan Ramasamy wrote:
You have to use Oracle's Oracle 9i thin driver .
put this driver infront of the classpath i.e before weblogic_sp.jar and
weblogic.jar
/selvan
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]..
The BEA driver is available in WLS6.1SP2 which is GA.
hth
sree
"Samuel Kounev" <[email protected]> wrote in message
news:[email protected]..
Hello everyone,
Has anyone been experimenting with the thin driver for Oracle 9i under
WLS6.1. I got it running, but
I get extremely bad performance when having multiple concurrent accesses.
It
works more or less in
single user mode. Also it seems not to support XA transactions?
When could we expect the driver from BEA to be out?
Thanks in advance!
Samuel Kounev
TU-Darmstadt, Germany

In need of a new hard drive for my old G5 computer

Hello there, I'm not as savvy as you are with computers but I am in need of a new hard drive for my old G5 computer that my husband uses. His crashed. If you did it all over again would you buy the same new hard drive? If so, where did you buy it? I don't even know where to start and was SO happy to find this recent post on installing new drives into the G5. Any advice would be much appreciated. Thank you!
<Title Edited by Host>

I actually just ran across this hard drive oddity for the first time myself just yesterday. It seems that some older Macs may not be able to use the newest SATA interfaces on some hard drives.
I an attempt to not get overly technical, SATA is the current interface type on computer hard drives. You can get some additional information from Wikipedia at http://en.wikipedia.org/wiki/Serial_ATA. There are currently three revisions, SATA-1 (the oldest), SATA-2 (the current version), & SATA-3 (the latest and greatest).
So what happened was that my G5 could not use the SATA-3 drive I purchased because the computer could not support the SATA-3 standard. It was possible to "slow down" one of the other test SATA-3 drives to make it work like a SATA-2 and so it may be possible to do the same to other hard drives.
To answer your question, I would NOT purchase the saem hard drive for my Mac as it does not work for this older Mac.
My suggestion, if you can find one purchase the same hard drive that was in the computer. That way you know it is compatible. If you would like to upgrade, you will have to do some looking. Although I cannot recommend a specific drive, my two favorite companies are Seagate, www.seagate.com and Western Digitial, www.wdc.com. You most likely have a 3.5" drive, if you have a desktop, 2.5" for a laptop. WD has the Cavier line and Seagate has either Barrcuda or Momentus. What you are looking for is capacity.
So, both Seagate and Western Digital are good. You need a 3.5" drive for a desktop or 2.5" drive for a laptop. Stick with a SATA-2 drive also known as a SATA 3Gb/s drive for compatibility. Get a drive that is 7200 RPM or higher. Finally purchase the largest capacity at you can afford. Amazon is a good general place to been looking.
KWCitizen_Apple

I need a new external hard drive for my iMac8,1

I need a new external hard drive for my :
Model Name:    iMac
Model Identifier:    iMac8,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    3.06 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    6 MB
Memory:    4 GB
Bus Speed:    1.07 GHz
Boot ROM Version:    IM81.00C1.B00
SMC Version (system):    1.30f1
Serial Number (system):    YD8520CD0N4
Hardware UUID:    073B29AD-6FFB-5E64-A52C-BF19A054F363
I do not have Thunderbolt on this and when I look up the specs for USB I get
USB Bus:
Host Controller Location:    Built-in USB
Host Controller Driver:    AppleUSBUHCI
PCI Device ID:    0x2835
PCI Revision ID:    0x0004
PCI Vendor ID:    0x8086
Bus Number:    0x3a
Don't know if this is USB 3.0 or USB 2.0
All the new drives seem to use either Thunderbolt or USB 3.0

I have a Western Digital 2 Terabyte USB External Hard Drive and it works like a charm and it costed me $129.00. My opinion is you can't go wrong with this brand and size for home use.
Cheers
Don

Need help with SMS Helper Driver for W520 Windows 7 64--bit

Similar Messages

Maybe you are looking for