NEED HELP with Sound Blaster 5.1 digital LIVE! IM FED UP WITH THIS PEICE OF JUNK SOUND C
yes i installed the Sound Blaster 5. digital LIVE! into my system and i got a new updated installation cd from creative and everything .. now heres the problem everytime i try to do an upgrade or download stuff from creative i always get an error message sayin MY SOUND CARD IS NOT INSTALLED .. but everything on my computer says it is installed and working properly .. so what the hell is going on ??? im a first time buyer of creative products and i purchased this from word of mouth on how good it was and i tell you what this sound card is a peice of **bleep** ... i have never in my life had such a problem installing something .. well i cant even use diagnostics cause i get the same message " MY SOUND CARD IS NOT INSTALLED ... i have tried uninstalling everything and so for and still nuthing .. i get sound through it but i cannot access any of the features from the cd or upgrade any of the drivers or anything .. SOOOOOOOOOOOOOOOO WHAT AM I SUSPOSED TO DO ?? IM ALSO GOING AS FAR AS SENDING THIS BACK TO CREATIVE FOR A REPLACEMENT CAUSE THIS CARD HAS TO BE DEFECTIVE .........ANYONE WITH SOME ANSWERS PLEASE LET ME KNOW ?
ok i found my directx program and opened it and did sound test and other tests and it says theres no problems found .
so this leads me back to my problem i stll get the error message saying that MY SOUND CARD CANNOT BE DETECTED ON MY SYSTEM . PLEASE MAKE SURE YOU SOUND CARD IS PROPERLY INSTALLED ...
i went to creative to do the autoupdate install so it would auto check my system and i get a error message saying theres components that are corrupted and it closes and does nuthing ..
and everytime i try to do an update i get the no sound card error message so im back to square ,
i have done everything i can possibly think of and also everything the techs told me to do nd this **bleep** still dont work and i still cant use any of the features that came on the disc (i.e.) diagnostics and others etc.etc.etc.
my only conclusion is i have a deffecti've sound card ..........unless someone can think of a miracle fix i dont see anything else it could be
Message Edited by theviper on -06-2005 :00 AM
Similar Messages
-
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
Hi!!
I urgently need help with this:
When I compile this in Flex Builder 3 it says: The element type 'mx:Application' must be terminated by the matching end-tag '</mx:Application>'.
but I have this end tag in my file, but when I try to switch from source view to desgin view it says, that: >/mx:Script> expected to terminate element at line 71, this is right at the end of the .mxml file. I have actionscript(.as) file for scripting data.
This is the mxml code to terminate apllication tag which I did as you can see:
MXML code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundGradientAlphas="[1.0, 1.0]" backgroundGradientColors="[#007200, #000200]" width="1024" height="768" applicationComplete="popolni_vse()">
<mx:HTTPService id="bazaMME" url="lokalnabaza/baza_MME_svn.xml" showBusyCursor="true" resultFormat="e4x"/>
<mx:Script source="dajzaj.as"/>
<mx:states>
<mx:State name="Galerije">
<mx:SetProperty target="{panel1}" name="title" value="Galerije MME"/>
<mx:SetProperty target="{panel2}" name="title" value="opis slik"/>
<mx:SetProperty target="{panel3}" name="title" value="Opis Galerije"/>
<mx:AddChild relativeTo="{panel1}" position="lastChild">
<mx:HorizontalList x="0" y="22" width="713.09863" height="157.39436" id="ListaslikGalerije"></mx:HorizontalList>
</mx:AddChild>
<mx:SetProperty target="{text1}" name="text" value="MME opisi galerij "/>
<mx:AddChild relativeTo="{panel1}" position="lastChild">
<mx:Label x="217" y="346" text="labela za test" id="izbr"/>
</mx:AddChild>
<mx:SetProperty target="{label1}" name="text" value="26. November 2009@08:06"/>
<mx:SetProperty target="{label1}" name="x" value="845"/>
<mx:SetProperty target="{label1}" name="width" value="169"/>
<mx:SetProperty target="{Gale}" name="text" value="plac za Galerije"/>
</mx:State>
<mx:State name="Projekti"/>
</mx:states>
<mx:MenuBar id="MMEMenu" labelField="@label" showRoot="true" fillAlphas="[1.0, 1.0]" fillColors="[#043D01, #000000]" color="#9EE499" x="8" y="24"
itemClick="dajVsebino(event)" width="1006.1268" height="21.90141">
<mx:XMLList id="MMEmenuModel">
<menuitem label="O nas">
<menuitem label="reference podjetja" name="refMME" type="check" groupName="one"/>
<menuitem label="reference direktor" name="refdir" type="check" groupName="one"/>
<menuitem label="Kontakt" name="podatMME" groupName="one" />
<menuitem label="Kje smo" name="lokaMME" type="check" groupName="one" />
</menuitem>
<menuitem type="separator"/>
<menuitem label="Galerija">
<menuitem label="Slovenija" name="galSvn" type="check" groupName="one"/>
<menuitem label="Nemčija" name="galDeu" type="check" groupName="one" />
</menuitem>
<menuitem type="separator"/>
<menuitem label="projekti">
<menuitem label="Slovenija" name="projSvn" type="check" groupName="one"/>
<menuitem label="Nemčija" name="projDeu" type="check" groupName="one" />
<menuitem label="Madžarska" name="projHun" type="check" groupName="one"/>
</menuitem>
</mx:XMLList>
</mx:MenuBar>
<mx:Label x="845" y="10" text="25. November 2009@08:21" color="#FFFFFF" width="169" height="18.02817" id="label1"/>
<mx:Label x="746" y="10" text="zadnja posodobitev:" color="#FFFFFF"/>
<mx:Panel x="9" y="57" width="743.02814" height="688.4507" layout="absolute" title="Plac za Vsebino" id="panel1">
<mx:Text x="0" y="-0.1" text="MME vsebina" width="722.95776" height="648.4507" id="Gale"/>
</mx:Panel>
<mx:Label x="197.25" y="748.45" color="#FFFFFF" text="Copyright © 2009 MME d.o.o." fontSize="12" width="228.73239" height="20"/>
<mx:Label x="463.35" y="748.45" text="izdelava spletnih strani: FACTUM d.o.o." color="#FBFDFD" fontSize="12" width="287.60565" height="20"/>
<mx:Panel x="759" y="53" width="250" height="705.07043" layout="absolute" title="Plac za hitre novice" id="panel3">
<mx:Text x="0" y="0" text="MME novice" width="230" height="665.07043" id="text1"/>
<mx:Panel x="-10" y="325.35" width="250" height="336.61972" layout="absolute" title="začasna panela" color="#000203" themeColor="#4BA247" cornerRadius="10" backgroundColor="#4B9539" id="panel2">
<mx:Label x="145" y="53" text="vrednost" id="spremmen"/>
<mx:Label x="125" y="78" text="Label"/>
<mx:Label x="125" y="103" text="Label"/>
<mx:Label x="0" y="53" text="spremenljivka iz Menuja:"/>
<mx:Label x="45" y="78" text="Label"/>
<mx:Label x="45" y="103" text="Label"/>
</mx:Panel>
</mx:Panel>
<mx:Label x="9.9" y="10" text="plac za naslov MME vsebine" id="MMEnaslov" color="#040000"/>
</mx:states></mx:Application>I know it's been a while but… did you fix this?
It looks to me like you are terminating the <mx:Application> tag at the top. The opening tag should end like this: resultFormat="e4x">, not resultFormat="e4x"/> (Remove the /).
Carlos -
Please I really need help with this video problem.
Hi!
Please I need help with this app I am trying to make for an Android cellphone and I've been struggling with this for a couple of months.
I have a main flash file (video player.fla) that will load external swf files. This is the main screen.When I click the Sets Anteriores button I want to open another swf file called sets.swf.The app is freezing when I click Sets Anteriores button
Here is the code for this fla file.
import flash.events.MouseEvent;
preloaderBar.visible = false;
var loader:Loader = new Loader();
btHome.enabled = false;
var filme : String = "";
carregaFilme("home.swf");
function carregaFilme(filme : String ) :void
var reqMovie:URLRequest = new URLRequest(filme);
loader.load(reqMovie);
loader.contentLoaderInfo.addEventListener(Event.OPEN,comeco);
loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,progresso);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,completo);
palco.addChild(loader);
function comeco(event:Event):void
preloaderBar.visible = true;
preloaderBar.barra.scaleX = 0;
function progresso(e:ProgressEvent):void
var perc:Number = e.bytesLoaded / e.bytesTotal;
preloaderBar.percent.text = Math.ceil(perc*100).toString();
preloaderBar.barra.scaleX = perc;
function completo(e:Event):void
preloaderBar.percent.text = '';
preloaderBar.visible = false;
btHome.addEventListener(MouseEvent.MOUSE_DOWN,onHomeDown);
btHome.addEventListener(MouseEvent.MOUSE_UP,onHomeUp);
btSets.addEventListener(MouseEvent.MOUSE_DOWN,onSetsDown);
btSets.addEventListener(MouseEvent.MOUSE_UP,onSetsUp);
btVivo.addEventListener(MouseEvent.MOUSE_DOWN,onVivoDown);
btVivo.addEventListener(MouseEvent.MOUSE_UP,onVivoUp);
btHome.addEventListener(MouseEvent.CLICK,onHomeClick);
btSets.addEventListener(MouseEvent.CLICK,onSetsClick);
function onSetsClick(Event : MouseEvent) : void
if (filme != "sets.swf")
filme = "sets.swf";
carregaFilme("sets.swf");
function onHomeClick(Event : MouseEvent) : void
if (filme != "home.swf")
filme = "home.swf";
carregaFilme("home.swf");
function onHomeDown(Event : MouseEvent) : void
btHome.y += 1;
function onHomeUp(Event : MouseEvent) : void
btHome.y -= 1;
function onSetsDown(Event : MouseEvent) : void
btSets.y += 1;
function onSetsUp(Event : MouseEvent) : void
btSets.y -= 1;
function onVivoDown(Event : MouseEvent) : void
btVivo.y += 1;
function onVivoUp(Event : MouseEvent) : void
btVivo.y -= 1;
Now this is the sets.fla file:
Here is the code for sets.fla
import flash.utils.Timer;
import flash.events.TimerEvent;
var video:Video;
var nc:NetConnection;
var ns:NetStream;
var t : Timer = new Timer(1000,0);
var meta:Object = new Object();
this.addEventListener(Event.ADDED_TO_STAGE,init);
function init(e:Event):void{
video= new Video(320, 240);
addChild(video);
video.x = 80;
video.y = 100;
nc= new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, onStatusEvent);
ns.bufferTime = 1;
ns.client = meta;
video.attachNetStream(ns);
ns.play("http://www.djchambinho.com/videos/segundaquinta.flv");
ns.pause();
t.addEventListener(TimerEvent.TIMER,timeHandler);
t.start();
function onStatusEvent(stat:Object):void
trace(stat.info.code);
meta.onMetaData = function(meta:Object)
trace(meta.duration);
function timeHandler(event : TimerEvent) : void
if (ns.bytesLoaded>0&&ns.bytesLoaded == ns.bytesTotal )
ns.resume();
t.removeEventListener(TimerEvent.TIMER,timeHandler);
t.stop();
The problem is when I test it on my computer it works but when I upload it to my phone it freezes when I click Sets Anteriores button.
Please help me with this problem I dont know what else to do.
thank youMy first guess is you're simply generating an error. You'll always want to load this on your device in quick debugging over USB so you can see any errors you're generating.
Outside that, if you plan on accessing anything inside the SWF you should be loading the SWF into the correct context. Relevant sample code:
var context:LoaderContext = new LoaderContext();
context.securityDomain = SecurityDomain.currentDomain;
context.applicationDomain = ApplicationDomain.currentDomain;
var urlReq:URLRequest = new URLRequest("http://www.[your_domain_here].com/library.swf");
var ldr:Loader = new Loader();
ldr.load(urlReq, context);
More information:
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7de0.html
If you're doing this on iOS you'll need to stripped SWFs if you plan on using any coding (ABC) inside the files. You mentioned iOS so I won't get into that here, but just incase, here's info on stripping external SWFs:
http://blogs.adobe.com/airodynamics/2013/03/08/external-hosting-of-secondary-swfs-for-air- apps-on-ios/ -
Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!
Phil0124 wrote:
Apps downloaded with an Apple ID are forever tied to that Apple ID and will always require it to update.
The only way around this is to delete the apps that require the other Apple ID and download them again with yours.
Or simply log out of iTunes & App stores then log in with updated AppleID. -
I need help with this code error "unreachable statement"
the error_
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errors
import java.util.*;
import javax.swing.*;
import java.awt.*;
public class Tools//tool class
private int numberOfToolItems;
private ToolItems[] toolArray = new ToolItems[10];
public Tools()//array of tool
numberOfToolItems = 0;
for(int i = 0; i < toolArray.length; i++)//for loop to create the array tools
toolArray[i] = new ToolItems();
}//end for loop
}//end of array of tools
public int search(int id)//search mehtod
int index = 0;
while (index < numberOfToolItems)//while and if loop search
if(toolArray[index].getID() == id)
return index;
else
index ++;
}//en while and if loop
return -1;
}//end search method
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0;
int index;
index = search(id); <-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
}//end delete method
public void display()//display method
for(int i = 0; i < numberOfToolItems; i++)
//toolArray.display(g,y,x);
}//end display method
public String getRecord(int i)//get record method
// return toolArray[i].getName()+ "ID: "+toolArray[i].getID()
}//end getrecod
}//end class
Edited by: ladsoftware on Oct 9, 2009 6:08 AM
Edited by: ladsoftware on Oct 9, 2009 6:09 AM
Edited by: ladsoftware on Oct 9, 2009 6:10 AM
Edited by: ladsoftware on Oct 9, 2009 6:11 AMladsoftware wrote:
Subject: Re: I need help with this code error "unreachable statement"
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errorsThe compiler is telling you exactly what the problems are:
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0; // <<== HERE you return, so everyting in the if block after this is unreachable
int index;
index = search(id); //< -----------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
// <<== HERE where is the return statement?
}//end delete method
public String getRecord(int i)//get record method
// return toolArray.getName()+ "ID: "+toolArray[i].getID() <<== HERE you commented out the return statement
}//end getrecod
}//end class -
FormsCentral retiring in July???!!! Are you freaking kidding me? My clients use this feature all the time. What do you suggest I do now? What service do I go with that is comparable to it? I need help with this asap!
I would suggest checking out http://www.logiforms.com. They have really good PDF support for both hosted PDF's and generating PDFs. You can:
populate PDF forms from a web form submission
Merge multiple PDF's together using conditional logic
Include uploaded images in the generated PDF
Get Electronic signatures on PDF's
Use conditional logic when creating PDF's
Convert HTML to PDF. You design in HTML and CSS and use form field wildcards and generate the PDF
More of the PDF features are explained here:
PDF Form Creator | PDF Form Maker | V3.Logiforms.com
They are also offering a 25% discount to anyone coming from Forms Central... -
Please need help with this query
Hi !
Please need help with this query:
Needs to show (in cases of more than 1 loan offer) the latest create_date one time.
Meaning, In cases the USER_ID, LOAN_ID, CREATE_DATE are the same need to show only the latest, Thanks!!!
select distinct a.id,
create_date,
a.loanid,
a.rate,
a.pays,
a.gracetime,
a.emailtosend,
d.first_name,
d.last_name,
a.user_id
from CLAL_LOANCALC_DET a,
loan_Calculator b,
bv_user_profile c,
bv_mr_user_profile d
where b.loanid = a.loanid
and c.NET_USER_NO = a.resp_id
and d.user_id = c.user_id
and a.is_partner is null
and a.create_date between
TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
order by a.create_datePerhaps something like this...
select id, create_date, loanid, rate, pays, gracetime, emailtosend, first_name, last_name, user_id
from (
select distinct a.id,
create_date,
a.loanid,
a.rate,
a.pays,
a.gracetime,
a.emailtosend,
d.first_name,
d.last_name,
a.user_id,
max(create_date) over (partition by a.user_id, a.loadid) as max_create_date
from CLAL_LOANCALC_DET a,
loan_Calculator b,
bv_user_profile c,
bv_mr_user_profile d
where b.loanid = a.loanid
and c.NET_USER_NO = a.resp_id
and d.user_id = c.user_id
and a.is_partner is null
and a.create_date between
TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
where create_date = max_create_date
order by create_date -
I just downloaded an album from itunes and 2 of the tracks will not play at all, they cut off. I need help with this??
Does the track play correctly in Quicktime Player? If it does then it is an iTunes issue. If it doesn't then it is possible the file was not completely downloaded, or is corrupt.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.
If it can be downloaded again, delete the track from iTunes.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.
If it is corrupt and you cannot download it a second time, contact Apple. Contact iTunes Store support staff through the report a problem links in your account history or,
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store -
Need help with this Pascal Triangle code....
Hey everyonr i am totally new to Java... so need your help with this code...
the function makeRows gives me problems... main is correct ... can someone fix my makeRows... i don't see what's wrong
public class Pascal {
/** Return ragged array containing the first nRows rows of Pascal's
* triangle.
public static int[][] makeRows(int nRows) {
int[][] mpr = new int[nRows+1][];
int l=0; int r=0;
for (int row = 0; row < nRows; row++) {
mpr[row] = new int[row+1]; //index starts at 0
if (row==0) {
mpr[0][0]= 1;
if (row==1) {
mpr[1][0]= 1;
mpr[1][1]= 1;
if (row>=2) {
for (int j = 0; j <= row; j++) {
if (j==0) {l=0;} else {l=mpr[row-1][j-1];}
if (j==mpr[row].length-1) {r=0;} else{r=mpr[row-1][j];}
mpr[row][j] = l + r;
return mpr;
public static void main(String[] args) {
if (args.length != 1) {
System.out.println("usage: java " + Pascal.class.getName() + " N_ROWS");
System.exit(1);
int nRows = Integer.parseInt(args[0]);
if (nRows > 0) {
int[][] pascal = makeRows(nRows);
for (int[] row : pascal) {
for (int v : row) System.out.print(v + " ");
System.out.println("");
}this makeRows function should return ragged array containing the first nRows rows of Pascal's triangle
thanks
Edited by: magic101 on May 9, 2008 4:03 PMmagic,
i think corlettk meant that some people might not know what pascal's triangle is.
also, you didnt say what was wrong with your code, just that it was wrong.
asking smart questions is about giving as much information you can to get the
best answer. i would throw a System.out.print between every line of your
algorithm. i would also supply us with the values you are getting for each row.
also, this question is asked all the time here. do a forum search.
1
11
121
1331
14641 -
I need help with the following book problem...could someone write this code for me?? Thanks!!
First design and implement a class called PairOfDice, composed of two six-sided Die objects. Using the PairOfDice class, design and implement a class to play a game called Pig. In this game, the user competes against the computer. On each turn, the current player rolls a pair of dice and accumulates points. The goal is to reach 100 points before your opponent does. If, on any turn, the player rolls a 1, all points accumulated for that round are forfeited and control of the dice moves to the other player. If the player rolls two 1s in one turn, the player loses all points accumulated thus far in the game and loses control of the dice. The player may voluntarily turn over the dice after each roll. Therefore the player must decide to either roll again (be a pig) and risk losing points, or relinquish control of the dice, possibly allowing the other player to win. Implement the computer player such that it always relinquishes the dice after accumulating 20 or more points in any given round.
I realize this is a long code, so it would be greatly appreciated to anyone who writes this one for me, or can at least give me any parts of it. I honestly have no clue how to do this because our professor is a dumbass and just expects us to know how to do this...he doesn't teach us this stuff...don't ask. Anyways, thanks for taking the time to read this and I hope someone helps out!! Thank you in advance to anyone who does!!!Nasty comments? It's not a matter of not liking you, it's a matter of responding to the
"I'ts everyone else's fault but mine" attitude of your post.
If you are genuine, the program is very easy to write, so, your Professor is correct when he said you should
be able to do it. I'm still very much in the beginner category at java, and it took me only 20 mins to write
(+5 mins to design it on paper). 2 classes in one file < 100 lines. Most of the regulars here would do it in half the time / half the lines.
All of the clues are in the description, break them down into their various if / else conditions. Write it down on paper.
Have a go. Try to achieve something. Post what you've tried, no-one will laugh at you, and you will be
pleasanty surprised at the level of help you will get when you've "obviously" made some effort.
Again, have a go. If you don't like problem-solving, then you don't like programming. So, you gotta ask
yourself - "what am I doin' here?" -
Urgent: im new and need help with this task!
I need help with converting the pseudo code to java code, Any help will b greatly appreciated!
// Declare a variable of type int, called "choice".
// Generate a random number between 0 inclusive and 7
// exclusive, and store that number into the variable
// "choice". (How do you generate a random number? Use the
// nextInt(int) method inside the random object, which takes
// a single int parameter. You can read about this method
// here:
// http://java.sun.com/j2se/1.5.0/docs/api/java/util/Random.html
// If "choice" is equal to 0, then create and return a new
// IBlock object, passing "game" as the parameter to IBlock's
// constructor.
// Otherwise, if "choice" is equal to 1, then create and
// return a new TBlock object, passing "game" as the
// parameter.
// Otherwise, if "choice" is equal to 2, then create and
// return a new OBlock object, passing "game" as the
// parameter.
// Otherwise, .... etc ....
// (please continue to do this for all of the 7 kinds of block
// that can be created)import java.util.*;
public class Echo{
public static void main(String[] args) {
//System.out.println("enter ur choice");
Random r=new Random();
int choice=r.nextInt(6);
switch(choice)
case 0:
IBlock object0=new IBlock("games");
break;
case 1:
TBlock object1=new TBlock("games");
break;
case 2:
OBlock object2=new OBlock("games");
break;
case 3:
LBlock object3=new LBlock("games");
break;
case 4:
JBlock object4=new JBlock("games");
break;
case 5:
SBlock object5=new SBlock("games");
break;
case 6:
ZBlock object6=new ZBlock("games");
break;
class TBlock
TBlock(String s)
System.out.print("TBlock called"+"\n value passed is "+s);
class IBlock
IBlock(String s)
System.out.print("IBlock called"+"\n value passed is "+s);
class JBlock
JBlock(String s)
System.out.print("JBlock called"+"\n value passed is "+s);
class OBlock
OBlock(String s)
System.out.print("OBlock called"+"\n value passed is "+s);
class LBlock
LBlock(String s)
System.out.print("LBlock called"+"\n value passed is "+s);
class SBlock
SBlock(String s)
System.out.print("SBlock called"+"\n value passed is "+s);
class ZBlock
ZBlock(String s)
System.out.print("ZBlock called"+"\n value passed is "+s);
} -
Hey guys i really need help with this problem...
Hey guys how is everyone? I have a Soundblaster X-Fi XtremeMusic. and i am having a real annoying problem, here is how it all started. I took the time and dusted out my computer by using a can of air duster, and i think a little got on there and it turned into frost. Weird thing is it happened before and i never had this problem. I turn my computer on and crank the volume up i receive no sound what so ever. I know it has to work because i have a pair of DJ headset hooked into the jack, and i heard a little pop sound. And no audio, every last port on the card i cannot get no sound out of it except one of them, it's really annoying i hate this doing this and i have to hook my 5.1 using one jack just to get sound. And it doesnt sound good i have some really powerful 1,000 watt speakers with 2 amps. I know this is yet due to the fact i only have the lime jack in This is the only way it'll work. And i have a THX cable and it works sometime. I hope my soundcard isnt messed up. I really hope you guys can help me with this issue. I cannot contact creative cust service via email because i dont have my box no more, and my serial number is faded on the card (i think that was the serial)
I try to explain the best way i can describe it. Below is my System Specs.
<pre>Processor: AMD Athlon X3 425 @ 2.7GHz
Video Card: ATI HD 5770 1GB
Hard Drive:1TB Western Digital, 500GB Western Digital, 300GB Seagate (all SATA connections)
Heatsink: Zalman CNPS7000C-Cu
Power Supply: Antec 550 Watts True Power II
Sound Card: Creative Soundblaster XI-FI Xtreme Music
Motherboard: ASUS M4A79XTD EVO
DVD Drives x2. Plextor DVD-RW/DL/ Sony DVD-ROM Drive via PATA connections</pre> Thanks in advance hope you all have a splended weekend.Hello
Thank you for your help but unfortunately still have troubles with the soundcard.
I upgraded my system to
RAM: Corsair Vengeance LP 16GB DDR3
Processor: AMD Phenom II X6 1090T Processor, Black Edition 3.3GHz
Video Card: Sapphire 100314-3L Radeon HD 6870 1GB
Hard Drive: 1TB Western Digital, 500GB Western Digital, 300GB Seagate (all SATA connections)
Heatsink: Zalman CNPS7000C-Cu
Power Supply: Corsair TX850W 850 Watt SLI/Crossfire Certified
Sound Card: Creative Labs Soundblaster X-FI Titanium Fatal1ty Professional (getting this soon)
Motherboard: ASUS M4A79XTD EVO (BIOS: 2102)
DVD Drive(s): Plextor DVD-RW/DL/ Sony DVD-ROM Drive via PATA connections
And i still run into problems i think its a matter of a hardware issue. The plugs dont really work
only one does (where lime goes in) And the bass has toned down as well... Isn't as powerful
as it used to be, so my best be is to upgrade to Creative Labs Soundblaster X-FI Titanium Fatal1ty Professional
Thats my only hope...
But again thank you for your help
Maybe you are looking for
-
How do i get the itunes 11.1.4 onto a windows 7 machine
I've hit a dead end with the 193 error. I've done multiple disc scans. downloaded microsoft patches but the new itunes will not load. I got an error about mobile device so i removed all apple mobile device files and still can't load itunes. Ive re
-
when i get a call on facetime in my mac when i recieve it an box will pop up and say facetime quit unexpectedly
-
Report and user statistics display in Obiee report
I have a requirement in OBIEE like i need to generate a report and that report has to display some valuable information dynamically. The report consist following column info... Report Name|Report Folder|Report Path|Description|Description ID|Owner|Su
-
Where is the drum pad in Notion?
Just purchased and downloaded Notion. It says in the reference manual that there is a drum pad using which I can select which voice to enter notes. I can only call up a keyboard, a fretboard or a mixer - no drum pad. This is particularly weird; I wo
-
Updated iphoto won't recognize camera
Just a note to Apple, your latest Iphoto update (7.1.3) won't recognize my digital camera anymore. I have an Imac and a MacBook with the latest iphoto installed. I had one version updated, the other not. The updated version will open Iphoto with the